共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
3.
1前言固体粉末涂料自60年代问世以来,由于具有良好的防腐蚀性、耐冲击性、高强度附着性及高效利用等优点,其应用得到了飞速发展,目前已在汽车、冰箱、洗衣机、空调器、自行车等民用装饰性涂料应用行业和石油管道、高速公路围栏等工业性涂料应用行业得到广泛的应用。... 相似文献
4.
5.
6.
特种涂料系指有特定用途,适用于特种底材、特殊环境的涂料。涂料,除传统的装饰性外,其各种防护功能和作用亦日趋广泛,它们是现代工业中不可缺少的配套材料。 相似文献
7.
超薄膨胀型钢结构防腐蚀防火涂料的研制 总被引:1,自引:0,他引:1
为了提高钢结构的防火及防腐蚀性能,通常在其表面涂覆防火及防腐蚀涂料.介绍了超薄膨胀型钢结构防火涂料的组成、配制工艺、技术指标和性能特点.通过对原材料的筛选和配方优化,研制成功室温快干、装饰性好、理化性能优、既防腐蚀又防火、室内外都可用的新型防火涂料.该技术已获得中国发明专利. 相似文献
8.
9.
10.
11.
Among various coating systems for industrial and engineering applications, glass and glass-ceramic coatings have advantages
of chemical inertness, high temperature stability and superior mechanical properties such as abrasion, impact etc as compared
to other coating materials applied by thermal spraying in its different forms viz. PVD, CVD, plasma, etc. Besides imparting
required functional properties such as heat, abrasion and corrosion resistance to suit particular end use requirements, the
glass and glass-ceramic coatings in general also provide good adherence, defect free surface and refractoriness.
Systematic studies covering the basic science of glass and glass-ceramic coatings, the functional properties required for
a particular end-use along with the various fields of application have been reviewed in this paper. 相似文献
12.
含TiB2陶瓷相热喷涂涂层的研究进展 总被引:1,自引:1,他引:0
TiB2具有高耐磨、高耐腐蚀、耐高温、抗氧化等优异性能,但由于高脆性和材料制备的困难性,使其用作结构材料还很难.通过各种工艺制备含有TiB2陶瓷相的涂层既可充分发挥材料的优异特性,满足工件所需的耐磨耐高温耐腐蚀等性能,又节省了材料节约了成本.本研究介绍了先进陶瓷材料TiB2的主要结构性能以及目前制备TiB2涂层的主要方法,着重介绍了有关国内外热喷涂法制备含TiB2陶瓷相涂层的研究进展和成果,并对不同热喷涂工艺的特点与发展趋势做了分析和讨论,最后阐述了TiB2涂层的成功应用情况及其广阔的发展前景. 相似文献
13.
Kobayashi A Kuroda T Kimura H Inoue A 《Journal of nanoscience and nanotechnology》2012,12(6):4883-4886
Metallic glass is one of the most attractive advanced materials, and many researchers have conducted various developmental research works. Metallic glass is expected to be used as a functional material because of its excellent physical and chemical functions such as high strength and high corrosion resistance. However, the application for small size parts has been carried out only in some industrial fields. In order to widen the industrial application fields, a composite material is preferred for the cost performance. In the coating processes of metallic glass with the conventional deposition techniques, there is a difficulty to form thick coatings due to their low deposition rate. Thermal spraying method is one of the potential candidates to produce metallic glass composites. Metallic glass coatings can be applied to the longer parts and therefore the application field can be widened. The gas tunnel plasma spraying is one of the most important technologies for high quality ceramic coating and synthesizing functional materials. As the gas tunnel type plasma jet is superior to the properties of other conventional type plasma jets, this plasma has great possibilities for various applications in thermal processing. In this study, the gas tunnel type plasma spraying was used to form the metallic glass coatings on the stainless-steel substrate. The microstructure and surface morphology of the metallic glass coatings were examined using Fe-based metallic glass powder and Zr-based metallic glass powder as coating material. For the mechanical properties the Vickers hardness was measured on the cross section of both the coatings and the difference between the powders was compared. 相似文献
14.
15.
耐高温防腐隔热涂料在石化管道领域具有重要的应用。文中以环氧改性有机硅树脂为基料,通过复配具有优异隔热性能的空心玻璃微珠、低温熔融玻璃粉、润湿分散剂、消泡剂等制备了一种至少耐500℃高温的防腐隔热涂料。利用扫描电子显微镜、热导分析、电化学阻抗谱,研究了不同颜基比、空心玻璃微珠含量对涂料力学性能和热学性能的影响。研究表明,颜基比为2/1,空心玻璃微珠占填料比例为40%时涂层综合性能达到最佳。 相似文献
16.
AlTiN coatings were developed over the last 10 years mainly for cutting applications. Besides composition and architecture of AlTiN coatings also PVD technology based on the reactive cathodic vacuum arc evaporation was permanently improved in view of various application fields. Different basic processes were developed in appropriate PVD units to cover wide spread process demands. Both, low temperature processes for decorative coatings including deposition on galvanized plastics as well as high temperature processes for cemented carbide tools can be realized with optimized processes. This paper presents PVD units and selected applications like gear hobs, broaches, ball end mills, cutting blades, forming tools and decorative coatings. 相似文献
17.
玻璃基片表面沉积ITO薄膜赋予玻璃诸多优异的电学、光学性能,但ITO薄膜的沉积也使得玻璃在可见光区透过率下降10%左右,在近红外区呈现高吸收、强反射现象,一定程度上弱化了ITO玻璃的部分应用。通过ITO多层减反膜的设计可以有效地解决上述问题,拓宽ITO薄膜玻璃的应用范围。本文首先阐述ITO薄膜沉积后光学曲线及该曲线各波段光学性能变化的理论解释,进而概述常规的减反膜系设计方法及膜层材料选择,并重点介绍ITO多层减反膜系的相关研究动态,本文结尾对ITO多层减反膜的设计和制备进行了展望。 相似文献
18.
离子镀硬质膜技术的最新进展和展望 总被引:27,自引:3,他引:24
电弧离子镀至今仍是硬质膜的主流技术,但是,其内容与80年代比已大为丰富。首先,镀层材料由单一氮化钛,发展到氮化钛与碳氮化钛,氮化钛铝,氮化铬等多种材料并用。然后,又进一步发展为多层复合镀层。远离平衡态过程听低温沉积技术日趋成熟。使各种机械零件的需磨损磨腐蚀底层逐步走向实用化,促进了机械戒严水平全面提高。低温沉积技术大幅度降低镀层内应力,使镀层的厚度能够达到数十,甚至上百微米,满足了发展高性能特性镀 相似文献
19.