Hydrothermal Synthesis and Characterization of Trimethyltin(IV) Derivatives with 2-Carboxyethylphosphonic and Benzylphosphonic acid: X-ray Crystal Structures of 2D Network Polymers

Two organotin(IV) derivatives, {[(CH₃)₃Sn]₆·[O₃P(CH₂)₂CO₂]₂·3H₂O} _n 1 and {[(CH₃)₂Sn]₄·[O₃PCH₂Ph]₄} _n 2, were synthesized by the reaction of trimethyltin(IV) chloride, 2-carboxyethylphosphonic acid and benzylphosphonic acid, respectively. Characterization of complexes 1 and 2 were achieved using elemental analysis, IR, TGA, NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy and X-ray crystallography diffraction analysis. X-ray characterization show that complexes 1 and 2 are 2D network structures.     

Syntheses and Structural Characterization of Triorganotin Derivatives of 3-Mercapto-4-methyl-4H-1,2,4-triazol: X-ray Crystal Structures of One-dimensional Zigzag Polymeric chain of Me3Sn[SC3H4N3] and Ph3Sn[SC3H4N3]

The triorganotin derivatives of 3-mercapto-4-methyl-4H-1,2,4-triazol, R₃Sn[SC₃H₄N₃] (R = Me 2, n-Bu 3, Ph 4, PhCH₂ 5), have been synthesized and characterized by IR and NMR spectroscopy. Among them, complexes 2 and 4 were also characterized by X-ray crystallography diffraction analyses, which revealed that both 2 and 4 show one-dimensional zigzag polymeric chain structure in which the geometries of tin atoms are both trigonal bipyramid with the axial positions occupied by sulfur and nitrogen atoms. An erratum to this article can be found at     

Syntheses, Characterization and Crystal Structures of 1D and 2D Organotin Polymers Containing 3-Methyladipic Acid Ligand

Four new organotin (IV) complexes of two types [(R₂Sn)₂(C₇H₁₀O₄)(μ₃-O)] _n (R = Me: 1; nBu: 2; and {(R₃Sn)₂[C₅H₁₀(COO)₂]} _n (R = Me: 3; nBu: 4) have been synthesized by the reaction of 3-methyladipic acid with the corresponding R₃SnCl (R = Me, nBu) under two different experimental conditions. All the complexes were characterized by elemental analysis, FT-IR, and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy. Except for 2, all of the complexes were also characterized by X-ray crystallography. The structural analyzes show that complex 1 is a 1D infinite chain polymer and forms a 2D organotin framework through intermolecular C–H···O interactions and weak Sn···O interactions. Complexes 3 and 4 are 2D network polymers in which 3-methyladipic acid acts as a tetra dentate ligand coordinated to the trialkyltin (IV) ion.     

Syntheses and Structural Characterization of Co(II) Coordination Polymers Supported by Bis(<Emphasis Type="Italic">N</Emphasis>-benzimidazolyl)methane and Bis(<Emphasis Type="Italic">N</Emphasis>-imidazolyl)methane

[Co₂(L¹)₂(NCS)₄]·4MeOH 1, [Co(L²)₂(H₂O)₂](Sal)₂·4H₂O (Sal = salicylate) 2 were obtained from self-assembly of the cobalt salts with bis(N-benzimidazolyl)methane (L¹), and bis(N-benzimidazolyl)methane (L²), and their structures were characterized by IR and X-ray diffraction analysis. Complex 1 exhibits a two-dimensional grid structure, whereas complex 2 is a coordination polymer having a one-dimensional linear chain structure. The grid in 1 lies parallel to the crystallographic ab plane and exhibits intra-grid M–M separations of 10.508 × 10.508 Å. Hydrogen bonds hold the cationic chains in 2 together leading to a three-dimensional network structure.     

二二甲亚砜合硫氰酸镉（DSTC）晶体的合成、结构、表征与晶体生长

合成了金属有机配合物晶体二二甲亚砜合硫氰酸镉Cd(SCN) 2 (C2 H6 OS) 2 (简称DSTC)。用X射线四圆衍射方法确定了此化合物的晶体结构。用元素分析、红外光谱对其进行了化学表征。首次在DMSO/水的溶剂中 ,生长出尺寸为 3 5mm× 12mm× 11mm透明单晶。     

六甲基二硅脲的合成与应用

介绍了以三甲基氯硅烷、氨及尿素为原料合成六甲基二硅脲的方法,以及六甲基二硅脲在药物合成中的应用。     

羧甲基纤维素钠复合纳滤膜的制备与性能表征

以羧甲基纤维素钠(CMC)为活性层铸膜液,聚砜(PSF)超滤膜为基膜,戊二醛(GA)水溶液为交联剂,采用涂敷和交联的方法制得一种新型荷负电复合纳滤(NF)膜。测定了复合膜的截留相对分子质量,并对其表面形貌进行了表征。在铸膜液中添加质量分数为3.5%的不同种类有机小分子,研究了其对复合膜截留性能的影响。CMC/PSF复合膜对几种无机盐的截留顺序为:Na2SO4>NaCl>MgSO4>MgCl2。     

Synthesis, Characterization and Crystal Structure of a Novel One-Dimensional Supramolecular Dimethyltin (IV) Compound

A novel one-dimensional (1D) supramolecular dimethyltin compound of (Me₂SnO)₂(Me₂SnOCH₃)(O₂CCH₂SC₄H₃N₂-2,6)[Me₂Sn(O₂CCH₂SC₄H₃N₂-2,6)₂]·CH₃OH was prepared by the reaction of (CH₃)₂SnCl₂ with (2-pyrimidylthio)acetic acid with CH₃ONa as a base. The title compound contained four different tin atom environments. Among them, Sn(1) and Sn(2) were both five-coordinate with distorted trigonal bipyramidal geometries, Sn(3) was six-coordinate with a distorted octahedral geometry and Sn(4) was seven-coordinate with pentagonal bipyramidal geometry. Meanwhile, the compound was stabilized in a 1D infinite chain by intermolecular Sn–O bonds. An erratum to this article can be found at     

一系列硫代双烯镍近红外染料的合成及性能

该文分别通过安息香路线和二酮路线合成了4种具有不同取代基的硫代双烯镍近红外染料,并考察了染料的物理、光电化学及热稳定性等性质。紫外-可见-近红外(UV-Vis-NIR)吸收光谱测试结果表明,配合物在700～1 100 nm都具有较强的吸收。对化合物的取代基效应及溶剂效应的研究发现:供电子基团导致λmax红移,而吸电子基团导致λmax蓝移,且λmax随着溶剂极性增大而增大。利用循环伏安法和差分脉冲伏安法(CV/DPV)测试了化合物的电化学性质。此外,该文还通过密度泛函理论(DFT)对化合物的HOMO和LUMO能级进行了计算。热失重测试研究表明,合成的化合物具有较好的热稳定性。     

Effect of Different Catalysts on the Synthesis of Bis(2-Hydroxyethyl) Terephthalate

Abstract

Transterification of Ethylene Glycol and DiMethyl Terephthalate, through the use of different acetates as catalysts, for producing Bis(2-HydroxyEthyl)Terephthalate under isothermal conditions, was studied from the point of view of the kinetics involved. Best results were obtained by employing zinc acetate and a second order reaction was determined from the experimental data.     

Extraction of Lanthanides(III) from HClO4 Solutions with Bis(diphenylphosphorylmethylcarbamoyl)alkanes

Abstract

Novel polyfunctional neutral organophosphorus compounds, namely bis(diphenylphosphoryl-methylcarbamoyl)alkanes of general formula [Ph₂P(O)CH₂C(O)NH]₂(CH₂)_n (I-III; n = 3, 5, 8), were synthesized and studied as extractants for La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y from perchloric acid solutions. The influence of both of HClO₄ concentration in the aqueous phase and that of the extractant in the organic phase on the extraction of metal ions is considered. The stoichiometry of the extracted complexes has been determined. Bis(diphenylphosphorylmethylcarbamoyl)alkanes II and III possess a higher extraction efficiency towards Ln(III) than their monoanalogue Ph₂P(O)CH₂C(O)NHC₉H₁₉. The potentialities of polymeric resin impregnated with bis(diphenylphosphorylmethylcarbamoyl)pentane II for the preconcentration of lanthanides(III) from perchloric acid solutions are demonstrated.     

Synthesis and X-ray Crystal Structures of New Tetrahedral Arylethynyl Substituted Silanes

The tetrakis(arylethynyl)silanes 1–4 of which 2–4 are new compounds have been synthesized and determined by single crystal structure analysis to show their tetrahedral molecular geometries reflected in slightly disturbed S₄ symmetry in the crystal lattices. The lattice structures are mainly determined by close packing effects while the interactions of π-stacking type or C–H···π contacts are rather secondary. A similar behaviour is found for the crystal structure of the comparative compound 5 with reference to 4 which lacks the ethynylene units. It is demonstrated that the given molecular constructions are distinguished by a high degree of tetrahedral persistency governing the packing structures.     

Kinetics of reversible addition–fragmentation transfer (RAFT) miniemulsion polymerization of styrene using dibenzyl trithiocarbonate as RAFT reagent and costabilizer

The roles of dibenzyl trithiocarbonate (DBTTC) as both costabilizer and reversible addition–fragmentation transfer (RAFT) reagent in RAFT miniemulsion polymerizations of styrene were investigated. The effectiveness of DBTTC costabilizer in retarding Ostwald ripening involved in the storage stability of miniemulsion is comparable to that of conventional low‐molecular‐weight costabilizers such as cetyl alcohol, but inferior to that of hexadecane. The major variables chosen for studying kinetics of RAFT miniemulsion polymerizations include the type of initiators and levels of DBTTC and surfactant. At a constant level of DBTTC, the rate of polymerization for benzoyl peroxide (BPO)‐initiated polymerization is slower than that for sodium persulfate (SPS)‐initiated polymerization. Furthermore, the polymerization rate decreases with increasing level of DBTTC for polymerizations initiated by BPO (or SPS). It is the monomer droplet nucleation that governs BPO‐initiated polymerizations. In contrast, for SPS‐initiated polymerizations, the probability for homogeneous nucleation to take place is greatly increased, especially for polymerizations with lower levels of DBTTC and higher levels of surfactant. © 2015 Society of Chemical Industry     

O‐carboxymethyl chitosan entrapped by silica: preparation and adsorption behaviour toward neodymium (III) ions

BACKGROUND: The recovery of neodymium from dilute solutions has become important because of its wide application in industry. This work reports the preparation of novel carboxymethyl chitosan adsorbents entrapped by silica (SiO₂/CMCH) and their application for adsorption of neodymium(III) ions from aqueous solution. RESULTS: The effect of the CMCH content, equilibrium pH (pH_e), contact time, initial concentrations of Nd(III) and temperature on the adsorption was investigated. The amount of Nd(III) adsorption increases with increasing pH_e, which can be explained by the pH‐titration curve of CMCH. Temperature has a positive effect on Nd(III) adsorption, and the amount adsorbed is 53.04 mg g^?1 dry adsorbent or 434.75 mg g^?1 CMCH at 328 K. Adsorption kinetics and isotherm can be described by the pseudo‐second‐order model and Langmuir equation. Both complexation and ion exchange mechanisms are believed to play an important role in Nd(III) adsorption, and possible coordination between CMCH and Nd(III) is speculated. Complete desorption can be reached when the concentration of HCl is more than 0.1 mol L^?1. CONCLUSION: A novel method was developed to prepare SiO₂/CMCH adsorbents through a one‐step sol‐gel strategy. The prepared adsorbents were biocompatible and non‐toxic with a good adsorption ability for Nd(III), and could be used for adsorptive recovery of Nd(III) from aqueous solutions. © 2012 Society of Chemical Industry     

In(acac)_3和Sn(acac)_2Cl_2的合成及表征

介绍了化学法制备氧化铟锡(ITO)纳米材料的两个重要合成原料In(acac)3和Sn(acac)2Cl2的合成方法。以InCl3·4H2O为原料,在pH值为9.0的柠檬酸溶液中制备In(acac)3;以SnCl4·5H2O与乙酰丙酮为原料,在甲苯溶剂中加热回流制备Sn(acac)2Cl2。通过IR、NMR、XRD检测手段对合成的产物进行表征分析。讨论了各种实验条件对合成反应的影响,总结出In(acac)3的最佳合成条件是:柠檬酸浓度为84 mmol·L-1,pH值为9.0;制取Sn(acac)2Cl2的最佳溶剂是甲苯。     

R-(+)-2-(4-羟基苯氧基)丙酸酯衍生物的合成与晶体结构研究

使用S-乳酸酯为原料,经酰化与对苯二酚发生SN2亲核取代反应得到标题化合物。产物结构通过MS、1HNMR进行了表征,并通过X-射线衍射对R-(+)-2-(4-羟基苯氧基)丙酸甲酯的单晶结构进行了测定。结果表明,晶体属三斜晶系,P3(2)空间群,晶胞参数a=10.126 7(4),b=10.126 7(4),c=8.505 7(6),α=90.00°,β=90.00°,γ=120.00°,V=755.40(7)3,Z=3,Dc=1.294 Mg/m3,μ(Mo Kα)=0.100 mm-1,F(000)=312。     

Structural and Thermal Characterization of A Novel High Nitrogen Energetic Material: (NH4)2DNMT

1,4‐Dihydro‐5H‐(dinitromethylene)‐tetrazole ammonium salt ((NH₄)₂DNMT), a high nitrogen energetic compound, was synthesized and structurally characterized by single‐crystal X‐ray diffraction. The thermal behavior of (NH₄)₂DNMT was studied with DSC and TG‐DTG methods. The kinetic equation of the thermal decomposition reaction is: dα/dT=10^13.17/3β(1−α)⁻² exp(−1.388×10⁵/RT). The critical temperature of thermal explosion is 182.7 °C. The specific heat capacity of (NH₄)₂DNMT was determined and the molar heat capacity is 301 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time‐to‐explosion of (NH₄)₂DNMT was calculated to be 277 s. The detonation velocity and detonation pressure were also estimated. All results showed that (NH₄)₂DNMT presents good performance.     

Synthesis and crystal structures of copper(I) iodide complexes chelating with bis(ethylamidophosphine)

Two copper(I) iodide complexes with polydentate bis(ethylamidophosphine) ligands were synthesized, characterized with crystal structures. They include a dimeric complex [Cu(μ-I)(CH₂NHCOC₂H₄PPh₂)₂]₂ 1 containing a planar Cu₂I₂ rhombohedron with two doubly bridged ligands and a tetrameric complex {Cu₄(μ-I)₄[(CH₂NHCOC₂H₄PPh₂)₂]₂} 3 with all the coppers and iodines forming a highly distorted cubane geometry.     

Copolymerization of Bis(4-methacryloymethylphenyl) sulphone with styrene

Bis(4-methacrloylmethylphenyl) sulphone (BMMPhSu) was prepared by the reaction of bis(4-chloromethylphenyl)sulphone with potassium salt of methacrylic acid. The structure of this new compund was determined by element analysis, IR, 1 H-NMR and 13 C-NMR analyses. Besides, the fundamental physical properties of bis(4-methacryloylmethylphenyl)sulphone such as the melting point and solubility in common as well as vinyl solvents: styrene, methyl methacrylate, butyl acrylate, acrylonitrile, and divinylbenzene were determined. Using 8 different hardening systems (polymerization initiators) copolymerization of this compound with styrene was carried out. Combinations of the following compounds: benzoyl peroxide, methyl ethyl ketone hydroxyperoxide, N,N-dimethylaniline, cobalt naphthenate, and aromatic amine adduct were used for hardening (polymerization initiation). An infludence of BMMPhSu concentration on gelation times with the use of three hardening systems was studied. Finally two hardening systems were chosen and using them copolymerizations of 20 and 25% of BMMPhSu with styrene were carried out. The obtained copolymers were tested for mechanical properties: tensile strength, Young's modulus, elongation at break hardness by Shore's and Brinnell's methods. Their thermal properties were also determined.     

硫氰酸锰及其相关衍生物的合成及化学表征

合成了金属有机配合物非线性光学晶体硫氰酸汞锰，及其相关衍生物，二二甲亚砜合硫氰酸汞锰，乙二醇一甲醚合硫氰酸汞锰，二水合二N，N－二甲基乙酰胺合硫氰酸汞锰，二水合二N－甲基－α－吡咯烷酮合硫氰酸汞锰。采用元素分析，红外光谱以及紫外－可见－近红外透央求我谱分析对其进行了化学表征。