Development of Novel Interpenetrating Network Gellan Gum-Poly(vinyl alcohol) Hydrogel Microspheres for the Controlled Release of Carvedilol

Novel interpenetrating polymeric network microspheres of gellan gum and poly(vinyl alcohol) were prepared by the emulsion cross-linking method. Carvedilol, an antihypertensive drug, was successfully loaded into these microspheres prepared by changing the experimental variables such as ratio of gellan gum:poly(vinyl alcohol) and extent of cross-linking in order to optimize the process variables on drug encapsulation efficiency, release rates, size, and morphology of the microspheres. Formation of interpenetrating network and the chemical stability of carvedilol after preparing the microspheres was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and x-ray diffraction studies were made on the drug-loaded microspheres to investigate the crystalline nature of the drug after encapsulation. Results indicated a crystalline dispersion of carvedilol in the polymer matrix. Scanning electron microscopy confirmed the spherical nature and smooth surface morphology of the microspheres produced. Mean particle size of the microspheres as measured by laser light scattering technique ranged between 230 and 346 µm. Carvedilol was successfully encapsulated up to 87% in the polymeric matrices. In vitro release studies were performed in the simulated gastric fluid or simulated intestinal fluid. The release of carvedilol was continued up to 12 h. Dynamic swelling studies were performed in the simulated gastric fluid or simulated intestinal fluid, and diffusion coefficients were calculated by considering the spherical geometry of the matrices. The release data were fitted to an empirical relation to estimate the transport parameters. The mechanical properties of interpenetrating polymeric networks prepared were investigated. Network parameters such as molar mass between cross-links and cross-linking density for interpenetrating polymeric networks were calculated.     

Oral controlled release formulation for highly water-soluble drugs: drug--sodium alginate--xanthan gum--zinc acetate matrix

An oral controlled release formulation matrix for highly water-soluble drugs was designed and developed to achieve a 24-hour release profile. Using ranitidine HCl as a model drug, sodium alginate formulation matrices containing xanthan gum or zinc acetate or both were investigated. The caplets for these formulations were prepared by direct compression and the in vitro release tests were carried out in simulated intestinal fluid (SIF, pH7.5) and simulated gastric fluid (SGF, pH1.2). The release of the drug in the sodium alginate formulation containing only xanthan gum completed within 12 hours in the SIF, while the drug release in the sodium alginate formulation containing only zinc acetate finished almost within 2 hours in the same medium. Only the sodium alginate formulation containing both xanthan gum and zinc acetate achieved a 24-hour release profile, either in the SIF or in the pH change medium. In the latter case, the caplet released in the SGF for 2 hours was immediately transferred into the SIF to continue the release test. The results showed that the presence of both xanthan gum and zinc acetate in sodium alginate matrix played a key role in controlling the drug release for 24 hours. The helical structure and high viscosity of xanthan gum might prevent zinc ions from diffusing out of the ranitidine HCl-sodium alginate-xanthan gum-zinc acetate matrix so that zinc ions could react with sodium alginate to form zinc alginate precipitate with a cross-linking structure. The cross-linking structure might control a highly water-soluble drug to release for 24 hours. Evaluation of the release data showed the release mechanism for the novel formulation might be attributed to the diffusion of the drug.     

A pH-sensitive nanocomposite microsphere based on chitosan and montmorillonite with in vitro reduction of the burst release effect

Objective: The aim of this study was to prepare pH-sensitive ofloxacin (OFL)/montmorillonite (MMT)/chitosan (CTS) nanocomposite microspheres that improve the burst release effect of the drug by the solution intercalation technique and emulsification cross-linking techniques. Methods: First, OFL/MMT hybrids were prepared through the solution intercalation technique. Then, OFL/MMT-intercalated OFL/MMT/CTS nanocomposite microspheres were obtained through emulsification cross-linking technology. The intercalated nanocomposite was confirmed by Fourier-transform infrared spectroscopy and X-ray diffraction. Finally, in vitro release of OFL from the microspheres was performed in simulated gastric fluids and simulated intestinal fluids. The effect of MMT content on drug encapsulation efficiency and the drug release of the nanocomposite microspheres were investigated. Results: The results showed that the release rate of OFL from the nanocomposite microspheres at pH 7.4 was higher than that at pH 1.2. Compared with pure CTS microspheres, the incorporation of certain amount of MMT in the nanocomposite microspheres can enhance the drug encapsulation efficiency and reduce the burst release. Conclusion: A sustained release particulate system can be obtained by incorporating MMT into the nanocomposite microspheres and can improve the burst release effect of the drug.     

卵磷脂/果胶锌复合凝胶球的制备及性能

采用滴制法, 以吲哚美辛(IDM)为模型药物, 皂化高甲氧化苹果果胶为骨架材料, 氯化锌为交联剂, 并复合卵磷脂(PC)制成吲哚美辛卵磷脂/果胶锌复合凝胶球。针对工艺参数对复合凝胶球粒径、粒重、载药量与包封率以及体外释药性能的影响进行了讨论。凝胶球均成均匀球形, 粒径1.13~1.42 mm, 粒重1.13~2.32 mg, 包封率范围70.72%~94.76%, 载药量范围5.84%~13.54%。同时实验结果表明, 卵磷脂的加入比例、药胶比(吲哚美辛与果胶的质量比)和皂化用NaOH浓度对复合凝胶球的形态、载药及释药性能均有明显影响。其中, 卵磷脂的加入使复合凝胶球载药性能和在模拟肠液中的缓释性能明显提高, 当卵磷脂与果胶的质量比为5:4, 皂化用NaOH浓度为30 g/L, 药胶质量比1:4时, 复合凝胶球在肠模拟液中8 h累计释药率为8.93%。稳定性实验结果表明, 在高温和光照的条件下放置, 卵磷脂/果胶锌复合凝胶球比原药及果胶锌凝胶球具有更好的稳定性, 显示出卵磷脂对果胶锌复合凝胶球在结肠定位给药系统的明显改善作用。     

Preparation and Characterization of Coacervate Microcapsules for the Delivery of Antimicrobial Oyster Peptides

Oyster peptides-loaded alginate/chitosan/starch microcapsules were prepared using external gelation method and internal emulsion gelation method. The solution of oyster peptides complexes was encapsulated into the microcapsules, which endowed the microcapsules with intestine passive targeting properties. The swelling behavior, encapsulation efficiency, and release behavior of oyster peptides from the microcapsules at different pH values were investigated. The microcapsules exhibited sustained release of the peptides in intestinal medium, and the release rate could be regulated by the pH value: in simulated gastric fluid, the release rate was greatly decreased, and in simulated body fluid and intestinal fluid, the microcapsules exhibited a sustained release in 24 h with different release rates. The microspheres were characterized by Fourier transform infrared. The results suggested that the alginate/chitosan/starch microcapsules could be a suitable copolymeric carrier system for intestinal protein or peptides delivery in the intestine.     

Preparation and characterization of coacervate microcapsules for the delivery of antimicrobial oyster peptides

Oyster peptides-loaded alginate/chitosan/starch microcapsules were prepared using external gelation method and internal emulsion gelation method. The solution of oyster peptides complexes was encapsulated into the microcapsules, which endowed the microcapsules with intestine passive targeting properties. The swelling behavior, encapsulation efficiency, and release behavior of oyster peptides from the microcapsules at different pH values were investigated. The microcapsules exhibited sustained release of the peptides in intestinal medium, and the release rate could be regulated by the pH value: in simulated gastric fluid, the release rate was greatly decreased, and in simulated body fluid and intestinal fluid, the microcapsules exhibited a sustained release in 24 h with different release rates. The microspheres were characterized by Fourier transform infrared. The results suggested that the alginate/chitosan/starch microcapsules could be a suitable copolymeric carrier system for intestinal protein or peptides delivery in the intestine.     

Design and characteristics of gellan gum beads for modified release of meloxicam

The aim of the presented work was to design, formulate and evaluate the properties of low-acyl gellan macro beads with the potential application as carriers for oral delivery of meloxicam (MLX) in the prophylaxis of colorectal cancer. The beads were obtained by means of ionotropic gelation technique. Calcium chloride (1.0%, 9.0?×?10^?2 M) was used as the cross-linking agent. Nine different polymer, drug and surfactant (Tween^®80) mixtures were used for production of the beads. The quantitative compositions of the mixtures were generated with the application of the Design of Experiments (DoE) modulus from the STATISTICA Software. The prepared formulations revealed 7.2–27.0% of drug loading and 29.2–50.7% drug encapsulation efficiency. It turned out that 0.5% amount of gellan gum in the mixtures was not sufficient to obtain spherical beads. The morphology and surface of the dried beads were analyzed by SEM. Raman spectra confirmed that MLX did not undergo structural changes during production of the beads. The swelling behavior and degradation of the beads were evaluated in three simulated gastrointestinal fluids at different pH (1.2; 4.5; 6.8). The MLX in vitro release studies were conducted on USP apparatus IV, working in the open loop mode. The obtained results showed that MLX release from the dried beads was pH-dependent. The formulations obtained from mixtures containing 1.0 and 1.5% of gellan may be considered as oral dosage forms for MLX, intended to omit the stomach and release the drug in the distal parts of the gastrointestinal tract.     

Development of polysaccharide-based colon targeted drug delivery systems for the treatment of amoebiasis

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30-40% drug release during the initial 4-5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18-24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Oral Controlled Release Formulation for Highly Water‐Soluble Drugs: Drug–Sodium Alginate–Xanthan Gum–Zinc Acetate Matrix

An oral controlled release formulation matrix for highly water‐soluble drugs was designed and developed to achieve a 24‐hour release profile. Using ranitidine HCl as a model drug, sodium alginate formulation matrices containing xanthan gum or zinc acetate or both were investigated. The caplets for these formulations were prepared by direct compression and the in vitro release tests were carried out in simulated intestinal fluid (SIF, pH7.5) and simulated gastric fluid (SGF, pH1.2). The release of the drug in the sodium alginate formulation containing only xanthan gum completed within 12 hours in the SIF, while the drug release in the sodium alginate formulation containing only zinc acetate finished almost within 2 hours in the same medium. Only the sodium alginate formulation containing both xanthan gum and zinc acetate achieved a 24‐hour release profile, either in the SIF or in the pH change medium. In the latter case, the caplet released in the SGF for 2 hours was immediately transferred into the SIF to continue the release test. The results showed that the presence of both xanthan gum and zinc acetate in sodium alginate matrix played a key role in controlling the drug release for 24 hours. The helical structure and high viscosity of xanthan gum might prevent zinc ions from diffusing out of the ranitidine HCl–sodium alginate–xanthan gum–zinc acetate matrix so that zinc ions could react with sodium alginate to form zinc alginate precipitate with a cross‐linking structure. The cross‐linking structure might control a highly water‐soluble drug to release for 24 hours. Evaluation of the release data showed the release mechanism for the novel formulation might be attributed to the diffusion of the drug.     

Development of Polysaccharide-Based Colon Targeted Drug Delivery Systems for the Treatment of Amoebiasis

ABSTRACT

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30–40% drug release during the initial 4–5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18–24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Microspheres for the oral delivery of insulin: preparation,evaluation and hypoglycaemic effect in streptozotocin-induced diabetic rats

Insulin-loaded microspheres were prepared by alternating deposition film layers that were composed of insulin and poly(vinyl sulfate) potassium on the surface of poly(lactic acid) (PLA) microspheres. The preparation of the insulin-loaded microspheres was optimized by an orthogonal test design, and the relationship between drug loading (DL) and film layers was studied. The particle size, DL and encapsulation efficiency of the obtained insulin-loaded microspheres with 10 films were 5.25?±?0.15?µm, 111.33?±?1.15?mg/g and 33.7?±?0.19%, respectively. Following this, the physical characteristics of the insulin-loaded microspheres were investigated. The results from scanning electron microscopy and a laser particle size analyzer (LPSA) indicated the spherical morphology, rough surface and increasing particle sizes of the insulin-loaded microspheres, which were compared to those of PLA microspheres. An in vitro release study showed that the insulin-loaded microspheres were stable in HCl solution (pH 1.0) and released insulin slowly in phosphate-buffered solution (pH 6.8). Finally, the drug efficacy of the prepared insulin-loaded microspheres via oral administration was evaluated in rats with diabetes induced by streptozotocin, and an obvious dose-dependent hypoglycemic effect was observed. This preliminary data could illustrate the prospect of using microspheres for the oral delivery of insulin.     

Resistant starch as a carrier for oral colon-targeting drug matrix system

In this study, a novel tablet of protein drug matrix for colon targeting was developed using resistant starch as a carrier prepared by pre-gelatinization and cross-linking of starch. The effects of pre-gelatinization and cross-linking on the swelling and enzymatic degradation of maize starch as well as the release rate of drug from the matrix tablets were examined. Cross-linked pre-gelatinized maize starches were prepared by double modification of pre-gelatinization and cross-linked with POCl₃, and bovine serum albumin was used as a model drug. For in vitro drug release assays, the resistant starch matrix tablets were incubated in simulated gastric fluid, simulated intestinal fluid and simulated colonic fluid, respectively. The content of resistant starch and swelling property of maize starch were increased by pre-gelatinization and cross-linking, which retarded its enzymatic degradation. Drug release studies have shown that the matrix tablets of cross-linked pre-gelatinized maize starch could delivery the drug to the colon. These results indicate that the resistant starch carrier prepared by pre-gelatinization and cross-linking can be used for a potential drug delivery carrier for colon-targeting drug matrix delivery system.     

壳聚糖固载阳离子环糊精微球的制备及载药性能

将β-环糊精、环氧氯丙烷和氯化胆碱经一步缩聚反应制得阳离子环糊精聚合物(CPβCD),采用反相悬浮法制备壳聚糖微球(CS),再以环氧氯丙烷为交联剂制备具有CPβCD和CS双重特性的壳聚糖固载阳离子环糊精聚合物微球(CS/CPβCD),用核磁共振(1H-NMR),红外光谱(FT-IR),扫描电镜(SEM)和X射线衍射(XRD)对产物进行表征,以酮洛芬为模型药物,研究了CS/CPβCD微球的载药性能。结果表明,CS/CPβCD微球对酮洛芬的最大载药量为849.4 mg/g,吸附规律符合Freundlich等温方程,载药CS/CPβCD微球具有缓释性能,并且在模拟肠液中的缓释效果优于模拟胃液,为CS/CPβCD作为药物缓释载体提供了依据。     

Preparation of Novel Cationic Copolymer Microspheres and Evaluation of Their Function by In Vitro and In Vivo tests as Ph-Sensitive Drug Carrier Systems

ABSTRACT

Novel pH-sensitive copolymer microspheres containing methylacrylic acid and styrene cross-linking with divinylbenzene were synthesized by free radical polymerization. The microspheres that were formed were then characterized by Fourier-Transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), size analysis, and X-ray analysis. The copolymer microspheres showed pulsatile swelling behavior whenthe pH of the media changed. The pH-sensitive microspheres were loaded with diltiazem hydrochloride (DH). The release characteristics of the free drug and the drug-loaded microspheres were studied under both simulated gastric conditions and intestinal pH conditions. The in vivo evaluation of the pulsatile preparation was subsequently carried out using beagle dogs as experimental subjects. The results demonstrated that the drug release exhibited a pulsatile character both in vitro and in vivo.     

Release of dexamethasone from PLGA nanoparticles entrapped into dextran/poly(vinyl alcohol) hydrogels

Hydrogels based on blends of poly(vinyl alcohol) (PVA) with dextran were prepared by a physical cross-linking procedure and used as matrices for the entrapment of biodegradable nanoparticles loaded with dexamethasone. The nanoparticles were prepared, by a solvent evaporation technique, using biodegradable copolymers of poly(lactic acid)–poly(glycolic acid) (PLGA). Size, morphology and surface characteristics of the nanoparticles were evaluated by scanning electron microscopy. The mechanism of drug release from the nanoparticles entrapped into the PVA-based matrices was studied and compared to that from free nanoparticles. The effect of dextran on the in vitro release profile of dexamethasone from the hydrogels was investigated. The obtained results indicate that PLGA nanoparticles are able to release dexamethasone following a diffusion-controlled mechanism. The entrapment of the nanoparticles into the hydrogels affects only slightly this mechanism of drug release. In addition, dextran/PVA hydrogels release a higher amount of drug with respect to pure PVA hydrogels and by increasing dextran content in the hydrogels, the amount of drug released increases.     

Biodegradable IPN hydrogel beads of pectin and grafted alginate for controlled delivery of diclofenac sodium

A novel diclofenac sodium (DS) loaded interpenetrating polymer network (IPN) beads of pectin and hydrolyzed polyacrylamide-graft-sodium alginate (PAAm-g-SA) was developed through ionotropic gelation and covalent cross-linking. The graft copolymer was synthesized by free radical polymerization under the nitrogen atmosphere followed by alkaline hydrolysis. The grafting, alkaline hydrolysis, and characterization of beads were confirmed by Fourier transforms infrared spectroscopy. The crystalline structure of drug after encapsulation into IPN beads were evaluated by differential scanning colorimetry and X-ray diffraction analyses. DS encapsulation was up to 96.45 %. The effect of hydrolyzed graft copolymer/pectin ratios and glutaraldehyde concentration on drug release in acidic and phosphate buffer solutions were investigated. The release of drug was significantly increased with increase of pH. The release of drug depends on the extent of cross-linking. The results indicated that IPN beads of hydrolyzed PAAm-g-SA and pectin could be used for sustained release of DS.     

Cyclodextrin nanosponges to enhance the dissolution profile of quercetin by inclusion complex formation

ABSTRACT

The therapeutic potential of quercetin is mostly hampered by its low water solubility and poor absorption. The aim of this study was to enhance the dissolution rate of quercetin by molecular encapsulation with cyclodextrin nanosponges. The inclusion complexes were obtained by freeze-drying method. Inclusion complexes were characterized by Fourier Transformed Infrared Spectroscopy (FTIR), x-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), transmission electron microscopy (TEM), and dissolution testing. FTIR, XRD, and DSC studies confirmed the interactions of quercetin with nanosponges. TEM images revealed the spherical morphology of complexes. The dissolution of the drug nanosponge complex was significantly higher compared with the pure drug in simulated intestinal fluid (SIF; pH 6.8). The results indicated that the degree of cross-linking has the significant influence on dissolution. Nanosponges with lower degree of cross-linking released 91% of the drug within 45 min, whereas nanosponges with higher degree of cross-linking resulted in sustained release up to 24 h.     

Studies of guar gum compression-coated 5-aminosalicylic acid tablets for colon-specific drug delivery

The aim of this study was to develop colon-specific delivery systems for 5-aminosalicylic acid (5-ASA) using guar gum as a carrier. Core tablets containing 5-ASA were prepared by wet granulation with starch paste and were compression coated with coating formulations containing different quantities of guar gum (300, 200, 150, and 125 mg). In vitro drug release studies were carried out in simulated gastric and intestinal fluids and in pH 6.8 buffer containing rat cecal contents. The application of 175 mg of coating formulation containing 150 mg of guar gum over 5-ASA core tablets resulted in the release of less than 2% drug in simulated gastric and intestinal fluids and about 93% of 5-ASA in pH 6.8 buffer containing rat cecal contents. Differential scanning calorimetric (DSC) studies showed the absence of any interaction between 5-ASA and the excipients on storage at 45°C for 12 weeks. The study confirmed that selective delivery of 5-ASA to the colon can be achieved using guar gum as a carrier in the form of a compression coating over the drug core.     

Sustained release characteristics of tablets prepared with mixed matrix of sodium carrageenan and chitosan: effect of polymer weight ratio, dissolution medium, and drug type

The interpolymeric complexation of carrageenan and chitosan was investigated for its effect on drug release from polymeric matrices in comparison to single polymers. For this purpose, matrices with carrageenan: chitosan (CG:CS) ratios of 100%, 75%, 50%, 25%, and 0% were prepared at 1:1 drug to polymer ratio. The effect of dissolution medium and drug type on drug release from the formulations was addressed. Two model drugs were utilized: diltiazem HCl (DZ) as a salt of a basic drug and diclofenac Na (DS) as a salt of an acidic drug. Three dissolution media were used: water, simulated gastric fluid (SGF), and simulated intestinal fluid (SIF). Some combinations of the two polymers showed remarkable sustained release effect on DZ in comparison to the single polymers in water and SGF. However, no apparent effect for the combination on DZ release was shown in SIF. The medium effect was explained by the necessity of chitosan ionization, which could be attained by the acidic SGF or microacidic environment created by the used acidic salt of DZ in water, but not in SIF. An interaction between the medium type and CG:CS ratio was also found. With DS, the polymer combinations had similar dissolution profiles to those of the single polymers in water and SIF, which was explained by the lack of chitosan ionization by the medium or the drug basic salt. The dissolution profiles could not be obtained in SGF, which was attributed to the conversion of DS into diclofenac free acid. The importance of chitosan ionization for its interaction with CG to have an effect on the release of DS was demonstrated by performing dissolution of SGF presoaked tablets of DS in SIF, which showed an effect of combining the two polymers on sustaining the drug release.     

Preparation and Evaluation of Mucin-Gelatin Mucoadhesive Microspheres for Rectal Delivery of Ceftriaxone Sodium

ABSTRACT

Soluble mucin (S-mucin) processed from the small intestines (ileal region) of freshly slaughtered pigs via homogenization, dialysis, centrifugation and lyophilization and its admixtures with type A gelatin were dispersed in an aqueous medium and used to formulate ceftriaxone sodium-loaded mucoadhesive microspheres by the emulsification cross-linking method using arachis oil as the continuous phase. The release profile of ceftriaxone sodium from the microspheres was evaluated in both simulated gastric fluid (SGF) without pepsin (pH 1.2) and simulated intestinal fluid (SIF) without pancreatin (pH 7.4). The microspheres were further evaluated as possible novel delivery system for rectal delivery of ceftriaxone sodium in rats. Release of ceftriaxone sodium from the microspheres in both release media was found to occur predominantly by diffusion following non-Fickian transport mechanism and was higher and more rapid in SIF than in SGF. The results obtained from this study may indicate that ceftriaxone sodium could be successfully delivered rectally when embedded in microspheres formulated with either type A gelatin alone or its admixtures with porcine mucin; hence providing a therapeutically viable alternative route for the delivery of this acid-labile third generation cephalosporin.