Synthesis,Characterization of Fulvic Acid–Poly(Methylmethacrylate) Graft Copolymers Based on Surface-Initiated Atom Transfer Radical Polymerization and its Effect on Performance of Poly(Lactic Acid)

Fulvic acid–poly(methylmethacrylate) graft copolymers were synthesized by surface-initiated atom transfer radical polymerization with fulvic acid. The result demonstrated that the hydrophobicity of fulvic acid–poly(methylmethacrylate) was improved after modification by surface-initiated atom transfer radical polymerization. Furthermore, poly(lactic acid)/fulvic acid–poly(methylmethacrylate) composites were prepared to improve the performances of poly(lactic acid) by blend melting. Compared to poly(lactic acid) with X_c of 5.38%, the X_c of poly(lactic acid)/fulvic acid–poly(methylmethacrylate) composites was 19.94%. Moreover, the impact strength of poly(lactic acid)/fulvic acid–poly(methylmethacrylate) composites was increased by 5.19% compared to poly(lactic acid). In all, this study provided an effective and feasible method for optimizing interface performance and enhancing the thermal stability of poly(lactic acid).     

Preparation and Properties of α-Cellulose Short Fiber-Reinforced Poly(lactic Acid) Composites

The objective of this study is to fabricate the PLA/α-cellulose composites and to investigate the effect of α-cellulose short fibers on the toughness improvement of PLA. To homogeneously disperse the polar α-cellulose in the non-polar PLA matrix, the as-received α-cellulose was subjected to surface modification using stearic acid to impart the hydrophobic characteristics to the short fibers. The α-cellulose fibers dispersed more homogeneously in PLA through this modification, and consequently, the fiber pull-out and longer micro-crack length could improve the toughness and damping property of the resulting PLA composites. The inclusion of α-cellulose short fibers considerably decreased the spherulite dimension of the PLA/α-cellulose composites to accommodate larger deformation through grain boundary sliding. The PLA/α-cellulose composite improved its toughness by three times that of the neat PLA with low α-cellulose content (～4 wt.%), and maintained its transparency.     

Structure and Performance of Poly(vinyl alcohol)/Poly(γ-benzyl L-glutamate) Blend Membranes

Poly(vinyl alcohol) (PVA)/poly(γ-benzyl L-glutamate) (PBLG) blend membranes with different PBLG wt contents were prepared by pervaporation. Structure and surface morphologies of PVA/PBLG blend membranes were investigated by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Thermal, mechanical, and chemical properties of PVA/PBLG blend membrane were studied by differential scanning calorimeter (DSC), tensile strength tests, and other physical methods. It was revealed that the introduction of PBLG homopolymer into PVA could exert an outstanding effect on the properties of PVA membrane.     

Preparation and Characterization of Inclusion Complexes of Poly(dimethylsiloxane)s with <Emphasis Type="Bold">γ</Emphasis>-Cyclodextrin Without Utilizing Sonic Energy

cyclodextrin (-CD) formed inclusion complexes with poly(dimethylsiloxane)s (PDMS) under sonic energy and the products were crystalline compounds. In this study an inclusion complex between PDMS and -CD was synthesized at room temperature in the presence of light and mixing, in the absence of light and in the absence of mixing. These inclusion complexes (ICs) were characterized by XRD, DSC, ¹H NMR, UV–Vis and FT-IR spectroscopy. The findings suggest that the reaction conditions change the crystalline structure and mole ratios of the complexes (monomer unit/-CD) determined by ¹H NMR spectroscopy for all of the ICs with -CD; which is 2 at room temperature, 1.5 under sonic energy, 3 without light and mixing. The UV–Vis results indicate an IC between -CD and PDMS.     

Synthesis and Characterization of the Inclusion Complex of Dicationic Ionic Liquid and β-Cyclodextrin

The supramolecular structure of the inclusion complex of β-cyclodextrin (β-CD) with 1,1',2,2'-tetramethyl-3,3'-(p-phenylenedimethylene) diimidazolium dibromide (TetraPhimBr), a dicationic ionic liquid, has been investigated. The inclusion complex with 1:1 molar ratio was prepared by a kneading method. Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD) analysis, (1)H NMR and thermogravimetric analysis (TGA) confirmed the formation of the inclusion complex. The results showed that the host-guest system is a fine crystalline powder. The decomposition temperature of the inclusion complex is lower than that of its parent molecules, TetraPhimBr and β-CD individually.     

Effect of γ-Cyclodextrin Inclusion Complex on the Absorption of R-α-Lipoic Acid in Rats

R-α-lipoic acid (RLA) is an endogenous organic acid, and works as a cofactor for mitochondrial enzymes and as a kind of antioxidant. Inclusion complexes of RLA with α-, β- or γ-cyclodextrins (CD) were prepared and orally administered as a suspension to rats. Among them, RLA/γ-CD showed the highest plasma exposure, and its area under the plasma concentration-time curve (AUC) of RLA was 2.2 times higher than that after oral administration of non-inclusion RLA. On the other hand, the AUC after oral administration of non-inclusion RLA and RLA/γ-CD to pylorus-ligated rats did not differ. However, the AUC after intraduodenal administration of RLA/γ-CD was 5.1 times higher than that of non-inclusion RLA, and was almost comparable to the AUC after intraduodenal administration of RLA-Na solution. Furthermore, the AUC after intraduodenal administration of RLA/γ-CD was not affected by biliary ligation or co-administration of an amylase inhibitor. These findings demonstrated that RLA was absorbed from the small intestine effectively when orally administered as a γ-CD inclusion complex, which could be easily dissolved in the lumen of the intestine. In conclusion, γ-CD inclusion complex is an appropriate formulation for supplying RLA as a drug or nutritional supplement with respect to absorption.     

EPDM Elastomer and Biothermoplastic Polyester-based Silicate-layered Multifunctional Nanocomposites Incorporated with Poly(MA-alt-α-olefin)-g-APTS-SiO2 NPs and PP-g-MA by Reactive Extrusion Nanotechnology

Multifunctional polymer blend nanocomposites consisting EPDM elastomer as a matrix polymer, bioengineering polyesters (PLA and PCL), PP-g-MA compatibilizer and covalently encapsulated colloidal alternating reactive copolymer-g-γ-aminopropyl trimethoxysilane-silica nanoparticles as reactive compatibilizer nanofillers, and organoclay (reactive ODA-MMT and complexable DMDA-MMT) nanofillers were fabricated in melt by a one-step reactive extrusion nanotechnology. The effects of bioengineering polyesters and their molecular mass, origin of organology, and reactive PP-g-MA compatibilizer were evaluated. Unique nanostructures, lower particle sizes and crystallinity, SEM–TEM morphologies, higher thermal behaviors, good mechanical and rheological properties of thermoplastic multifunctional nanocomposites were evaluated.     

Formation of a Polymer-Coated Inclusion Complex of D-Limonene and β-Cyclodextrin by Spray Drying

The polymer-coated inclusion complex powder formation of D-limonene and β-cyclodextrin obtained by spray drying was investigated with respect to the effects of various types of polymer coating agents on the powder particle size and morphology. The addition of the polymer coating agent affected the average particle size, morphology, and internal structures of the spray-dried powders. The average particle diameter of the uncoated spray-dried powders was approximately 5 µm. The powder particle size increased upon the addition of a polymer coating reagent. With the addition of 9 wt% of the polymer coating agent, an average diameter of approximately 80 µm was obtained for the spray-dried powder particles. However, further addition showed a negligible effect on the particle size. Inclusion complex crystals were observed on the surface and inside of the powder particles.     

Preparation and Characterization of Carboxymethyl Chitosan and β-Cyclodextrin Microspheres by Spray Drying

Three kinds of carboxymethyl chitosan/β-cyclodextrin microspheres loaded with theophylline were prepared by spray drying intended for pulmonary delivery. Mucociliotoxicity, permeation rate, and drug release characteristics of the product were investigated. The microspheres obtained by spray drying were found to be spherical with smooth or wrinkled surfaces. The mean particle size was between 3.39 and 6.06 µm. The microspheres demonstrated high product yield (43.7–50.2%), high drug loading (13.7–38.1%), and high encapsulation efficiency (86.9–92.8%). FT-IR indicated that there were interactions of theophylline with carboxymethyl chitosan matrix. Further studies on mucociliotoxicity and permeation confirmed that microspheres had better adaptability and high permeation rate. In vitro drug release from the microspheres was not related to the drug/polymer ratios.     

Simple Determination of Deoxycholic and Ursodeoxycholic Acids by Phenolphthalein-β-Cyclodextrin Inclusion Complex

An expeditious colorimetric methodology for the determination of the deoxycholic acid (DCA) and of the ursodeoxycholic acid (UDCA) in pharmaceutical formulations is reported. The method is based on their competitive complexation reaction with a color indicator to form β-cyclodextrin-inclusion complexes. Several pH color indicators were tested, but phenolphthalein (PHP) showed the best interaction with the β-cyclodextrin (β-CD) with an inclusion yield higher than 95%. The best concentrations of β-cyclodextrin to form inclusion complexes were 1.24 × 10⁻³ and 6.2 × 10⁻⁴ M at pH 9.5 and 10.5. Statistical analysis of the results showed that the pH had a significant effect on the DCA determination and that high β-CD-PHP inclusion complex concentrations had a significant negative effect on the UDCA determination (p < 0.05). The limit of detection and limit of quantification were 3.94 × 10⁻⁵ and 1.31 × 10⁻⁴ M for DCA (range: 6.1 × 10⁻⁶–3.13 × 10⁻³ M), 4.08 × 10⁻⁵  and 1.36 × 10⁻⁴ M for UDCA (range: 6.05 × 10⁻⁶–3.88 × 10⁻⁴ M). This simple and cheap method showed high stability and feasible instrumentation.     

Rapid Preparation Process of Silver Nanoparticles by Bioreduction and Their Characterizations

Bioreduction as a novel nanoparticle synthesizing technology attracts increasing attention. Dried cells of the bacterium Aeromonas sp. SH10 rapidly reduced [Ag（NH3）2]^＋ to Ago in the solution into which some amount of OH^- was introduced. The surface plasmon resonance centered at 425 nm on the UV-vis spectra and five broad Bragg reflections on the XRD pattern showed that stable silver nanoparticles were formed during the bioreduction process. TEM and SEM observations suggested that the silver nanoparticles were uniform in size and well dispersed on the cells and in the solution. Therefore, silver nanoparticles could be prepared rapidly by this bioreduction technology.     

Optimization of Synthetic Conditions for the Preparation of Dihomo-γ-Linolenic Acid from γ-Linolenic Acid

Orthogonal experiments were employed to optimize the correlated parameters of reduction, sulfonation, substitution and hydrolysis. These reactions were used to convert γ-linolenic acids into dihomo-γ-linolenic acids (DGLA). For the reduction, the best reaction conditions were at 35 °C for 4.5 h with LiAlH₄ and γ-linolenic acid (in the ratio of 40 g:100 g); for the sulfonation, reaction at 29 °C for 3.5 h with 150 g γ-linolenic alcohol and 65 mL mesyl chloride, then the water phase being extracted with dichloromethane (3 × 100 mL); for the substitution, the reaction at 80 °C for 2.5 h with metallic sodium and sulfonate (at a ratio of 8 g:100 g); and for the hydrolysis, reaction at 80 °C for 2.5 h with NaOH and dihomo dioate (at a ratio of 50 g:100 g). The four reactions gave yields that exceeded 90% for each step. Finally, crystallization and decarboxylation provided DGLA in an overall yield of 60% and >95% purity.     

β-Cyclodextrin Inclusion Complex to Improve Physicochemical Properties of Pipemidic Acid: Characterization and Bioactivity Evaluation

The aptitude of cyclodextrins (CDs) to form host-guest complexes has prompted an increase in the development of new drug formulations. In this study, the inclusion complexes of pipemidic acid (HPPA), a therapeutic agent for urinary tract infections, with native β-CD were prepared in solid state by kneading method and confirmed by FT-IR and ¹H NMR. The inclusion complex formation was also characterized in aqueous solution at different pH via UV-Vis titration and phase solubility studies obtaining the stability constant. The 1:1 stoichiometry was established by a Job plot and the inclusion mechanism was clarified using docking experiments. Finally, the antibacterial activity of HPPA and its inclusion complex was tested on P. aeruginosa, E. coli and S. aureus to determine the respective EC_50s and EC_90s. The results showed that the antibacterial activity of HPPA:β-CD against E. coli and S. aureus is higher than that of HPPA. Furthermore, HPPA and HPPA:β-CD, tested on human hepatoblastoma HepG2 and MCF-7 cell lines by MTT assay, exhibited, for the first time, antitumor activities, and the complex revealed a higher activity than that of HPPA. The use of β-CD allows an increase in the aqueous solubility of the drug, its bioavailability and then its bioactivity.     

Separation of Acetic Acid‐Water Mixtures through Poly(Vinyl Alcohol)/Poly(Acrylic Acid) Alloy Membranes by Using Evapomeation and Temperature Difference Evapomeation Methods

Abstract

Separation of acetic acid‐water mixtures by using evapomeation (EV) method were carried out over the full range of compositions at temperatures varying from 30 to 55°C using poly(vinyl alcohol)/poly(acrylic acid) (PVA/PAA) (75/25) (v/v) alloy membranes. PVA/PAA membranes gave separation factors of 110–5711 and permeation rates of 2.3×10^?4–1.53×10^?1 kg/m²h, depending on the operation temperature and feed mixture composition. The temperature dependence of the permeation in EV was expressed by the Arrhenius type expression and the activation energy was calculated as 9.15 kcal/mol. More efficient EV technique, which is called temperature difference evapomeation method (TDEV) was also applied to PVA/PAA membranes to separate acetic acid‐water mixtures; high permeation rates (1.7×10^?3–3.0×10^?1 kg/m²h) and separation factors (1335–8924) were obtained for each of the studied feed compositions. Azeotropic mixture of acetic acid and water was also separated by TDEV method with a separation factor of 297 and permeation rate of 1.50×10^?1 kg/m²h.     

Preparation and Properties of Biodegradable Shape Memory Polylactic Acid/Poly(ε-caprolactone) Blends under Volume Elongational Deformation

In this work, a novel eccentric rotor mixer (ERM), which can generate circulating volume elongational deformation, is employed to prepare biodegradable polylactic acid (PLA)/poly(ε-caprolactone) (PCL) thermo-responsive shape-memory blends without a compatibilizer. The results of scanning electron microscopy (SEM) show that the ERM has more efficient dispersion and compatibilization for blends than conventional Banbury mixers, which is beneficial for shape-memory performance. The results of Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) also confirm the consequences. Then, morphological and mechanical properties and shape memory behaviors of the blends are investigated in detail. Co-continuous morphology is found on EF-PLA50. The blends exhibit remarkable shape-memory performance. The bending shape fixing ratio and recovery ratio of the blends are more than 94% and are still more than 90% after five shape memory cycles. With the increase of PLA content, the shape fixing ratio of blends decreases, while the shape recovery ratio increases and the shape recovery time becomes shorter. All the blends show good mechanical properties.     

Application of Poly(acetic Acid)–Based Graft Copolymer as a Compatibilizer for Poly(L-lactic Acid)/Poly(butylenesuccinate) Blend System

Poly(L-lactic acid) (PLLA) was blended with poly(butylenesuccinate) (PBS) using a single-screw extruder to modify the poor characteristics of these polymers. Furthermore, when both polymers were blended, the graft copolymer that was synthesized by partially saponified poly(vinyl alcohol) (PSPVA) and ?-caprolactone (?-CL) was used as a novel compatibilizer. The structure of the synthesized compatibilizer was determined by ¹H or ¹³C NMR. From this result, the ring-opening polymerization of the ?-CL occurred at the hydroxyl group of PSPVA. The structures of the PLLA/PBS solvent-cast blended films could be observed via an optical microscope. From the optical microscopic observation, the structures of the solvent-cast blended films with the synthesized compatibilizer were more homogeneous than those of the solvent-cast blended films without the compatibilizer. The mechanical properties of the PLLA/PBS extruded blended films were determined by a tensile test. The result showed the tensile strength of the blended films with the synthesized compatibilizer was greater than that of the blended films without the compatibilizer.     

Preparation and Evaluation of Poly(Ethylene Glycol)–Poly(Lactide) Micelles as Nanocarriers for Oral Delivery of Cyclosporine A

A series of monomethoxy poly(ethylene glycol)–poly(lactide) (mPEG–PLA) diblock copolymers were designed according to polymer–drug compatibility and synthesized, and mPEG–PLA micelle was fabricated and used as a nanocarrier for solubilization and oral delivery of Cyclosporine A (CyA). CyA was efficiently encapsulated into the micelles with nanoscaled diameter ranged from 60 to 96 nm with a narrow size distribution. The favorable stabilities of CyA-loaded polymeric micelles were observed in simulated gastric and intestinal fluids. The in vitro drug release investigation demonstrated that drug release was retarded by polymeric micelles. The enhanced intestinal absorption of CyA-loaded polymeric micelles, which was comparable to the commercial formulation of CyA (Sandimmun Neoral®), was found. These suggested that polymeric micelles might be an effective nanocarrier for solubilization of poorly soluble CyA and further improving oral absorption of the drug.