共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
ATS(自动测试系统)及ATE技术 总被引:18,自引:0,他引:18
一般意义的自动测试系统是指那些采用计算机控制,能实现自动化测试的系统。这类系统通常是在标准的测控总线或仪器总线(CAMAC、GPIB、VXI、PXI等)的基础上组建而成的。工程上的自动测试系统往往针对一定的应用领域和被测对象,并且常按应用对象命名,因此有飞机自动测试系统,导弹自动测试系统,发动机自动测试系统,雷达自动测试系统,印制电路板(PCB)自动测试系统,大规模集成电路(LSI)自动测试系统等。按应用场合的不同,又可将飞机、导弹等大型装备的自动测试系统分为生产过程用自动测试系统(面向功能、性能测试)及场站维… 相似文献
3.
滤波器在音频DAC测试中的应用 总被引:1,自引:0,他引:1
本文给出了模拟滤波器在使用ATE(Automatic Test Equipment自动测试设备)进行高精度音频DAC(数模转换器)测试中的应用,该方法提高了测试准确度,满足了芯片量产测试的需求。论文首先介绍了DAC在ATE上的基本测试方法,然后讨论了应用滤波器的音频DAC测试方案,最后通过Matlab数学仿真和搭建电路对实际的芯片进行测试,证明了该方案的有效性。 相似文献
4.
董云耀 《微电子学与计算机》1991,8(5):36-39
有限状态机(FSM)是一种实现时序逻辑的常用设计模式,目前更加广泛地被应用于数字系统中控制逻辑的实现,本文主要介绍对基于PLA实现的FSM测试方案及其算法流程的研究及设计。该方案所考虑的故障模型是由交叉点故障,触发器功能故障和固定型故障所构成的混合模型,算法流程是在PLA自动测试生成系统基础上进行开发的,因此,可靠性比较高。 相似文献
5.
面向测试程序集(TPS)软件架构是通用自动测试系统的发展方向,而建立统一的测试系统模型是测试系统中资源管理与配置的关键。提出了一种基于TPS的自动测试系统建模方案及实现机制,利用关系型数据库建立包括仪器仪表资源自动配置、被测件管理、测试底版通信控制的自动测试系统模型。基于VC6.0平台,在测试主程序与仪器仪表控制、与测试底版之间建立引擎,实现资源的自动选择和配置,解决了测试程序对仪器仪表的依赖问题及测试底版的通用性问题。该方案已经成功应用于某出口三型雷达综合电路集成测试系统中。 相似文献
6.
印制电路板自动测试技术与发展 总被引:1,自引:0,他引:1
本文介绍了印制电路板的自动测试技术,包括在线测试、边界扫描测试、非向量测试、红外热图象测试等技术。阐述了每种测试技术的特点,并探讨了印制电路板ATE的发展方向。 相似文献
7.
8.
本文针对射频信号手动测试的局限性,提出了一套基于Visual Basic语言的自动测试系统。该自动测试系统通过调用SCPI(可编程仪器标准命令集)对带有GPIB接口的无线通信综测仪及射频信号发生器进行程控,并根据测试流程自动完成相关测试项目。实际生产测试检验证明,较之传统的人工测试,可以大幅提高测试效率与精确度;此外,系统结构灵活,扩展性强,具有很好的市场应用前景。 相似文献
9.
随着通用自动测试系统平台的发展,开发者需要统筹管理越来越多的板卡、分立仪器和应用程序,这时多语言混合编程的问题是无法避免的。在研究讨论传统多语言混合编程的解决方案的基础上,介绍了NI TestStand架构及其实现多语言混合编程的工作原理,提出了使用NI TestStand在解决测试领域多语言混合编程方面所具有的适应性强、可扩展性强等优势,举实例简要说明了使用NI TestStand开发测试系统的一般方式,并采用NI TestStand重新构架原有测试系统。总结得出结论:使用NI TestStand解决通用自动测试系统平台多语言混合编程问题是先进的和实用的。 相似文献
10.
本文介绍了同步机/分解器一数字转换器(自整角机/旋转变压器一数字转换器)的自动测试原理和方法,该自动测试系统是基于HPVEE软件平台和GPIB接口的一个应用实例。本文同时也对该产品人工测试与手动测试的误差进行了分析。 相似文献
11.
12.
利用NFV实现电信网络设备软硬件解耦,摆脱了对专用硬件设备的依赖,并能利用NFV资源共享、自动部署、弹性伸缩等特性,但同时也带来了故障点多、故障定位分析困难等问题,导致NFV网络的运营维护难度增加。分析了NFV故障处理的流程及故障关联方案,为NFV场景下的故障定位处理提供指引。同时给出了VNF故障自愈实现方案,利用VNF特性,实现网元及业务自愈,提升自动化运维能力。 相似文献
13.
Vasudevan Madampu Suryasarman Santosh Biswas Aryabartta Sahu 《Journal of Electronic Testing》2018,34(1):83-103
Software-based self-testing (SBST) is introduced for at-speed testing of processors, which is difficult with any of the external testing techniques. Evolutionary approaches are used for the automatic synthesis of SBST programs. However, a number of hard-to-detect faults remain unidentified by these autogenerated test programs. Also, these approaches have considered fault models which have low correlation with the gate-level fault models. This paper presents a greed-based strategy, where the instruction sequences that detect the freshly identified faults are preserved throughout the evolutionary process to identify the hard-to-test faults of the processor. Subsequently, the overall coverage is also improved. A selection probability is estimated from the testability properties of the processor components and assigned to every instruction to accelerate the test synthesis. The range of performance and scalability are comprehensively evaluated on a configurable MIPS processor and a full-fledged 7-stage pipeline SPARC V8 Leon3 soft processor using behavioral fault models. The efficacy of our approach was explained by demonstrating the correlation between behavioral faults and gate-level faults of MIPS processor for the proposed scheme. Experimental results show that improved coverages of 96.32% for the MIPS processor and 95.8% for the Leon3 processor are achieved in comparison with the conventional methods, which have about 90% coverage on the average. 相似文献
14.
军用电子装备数字系统自动测试技术 总被引:2,自引:0,他引:2
首先综合论述了目前可用于军用电子装备数字系统的自动测试技术,然后介绍了一种适用于海军新型舰载电子装备数字电路板的故障诊断技术,经过对部分雷达、电子战以及指控系统等舰载电子装备数字电路板的实际运用,表明该项技术能够实现对海军新型舰载电子装备的故障诊断。 相似文献
15.
郑晓薇 《微电子学与计算机》1999,16(1):51-55
在逻辑门电路测试技术中,可以在泛序测试法基础上建立故障诊断树,用于完成单电路故障的检测与定位诊断。文章采用最小完全检测测试集和故障表F^*矩阵将故障诊断树为矩阵集合,进而利用关系数据库加以描述,并采用相应的算法自动生成。该研究旨在探索一种用数据库技术自动生成故障诊断树的方法,以达到测试参数自动获取这一目的。 相似文献
16.
17.
Amir Rajabzadeh Seyed Ghassem Miremadi Mirzad Mohandespour 《Journal of Electronic Testing》2004,20(5):553-567
Increasing use of commercial off-the-shelf (COTS) superscalar processors in industrial, embedded, and real-time systems necessitates the development of error detection mechanisms for such systems. This paper presents an error detection scheme called Committed Instructions Counting (CIC) to increase error detection in such systems. The scheme uses internal Performance Monitoring features and an external watchdog processor (WDP). The Performance Monitoring features enable counting the number of committed instructions in a program. The scheme is experimentally evaluated on a 32-bit Pentium® processor using software implemented fault injection (SWIFI). A total of 8181 errors were injected into the Pentium® processor. The results show that the error detection coverage varies between 90.92 and 98.41%, for different workloads. To verify the experimental results an analytical evaluation of the coverage is also performed. 相似文献
18.
19.
20.
WANG Xin-sheng SUN Han-xuAutomation School Beijing University of Posts Telecommunications Beijing P.R. China 《中国邮电高校学报(英文版)》2006,13(1):6-9
1IntroductionWith the space technology developing,much moreCommercial-Off-The-Shelf(COTS)devices are used inmicrosatellites that are mostlylocatedin Low Earth Or-bit(LEO)[1~3].The COTS devices have relatively lowpower consumption,high processing performan… 相似文献