Residual Stiffness of Cracked Cross-Ply Composite Laminates Under Multi-Axial In-plane Loading

In this paper, the Equivalent Constraint Model (ECM) together with a 2-D shear lag stress analysis approach is applied to predict residual stiffness properties of polymer and ceramic matrix [0/90 _n /0] cross-ply laminates subjected to in-plane biaxial loading and damaged by transverse and longitudinal matrix cracks. It is found that the longitudinal Young’s modulus, shear modulus and major Poisson’s ratio undergo large degradation as the matrix crack density increases, with Poisson’s ratio appearing to be the most affected by transverse cracking. In cross-ply laminates with thick 90° layer strip-shaped delaminations begin to initiate and grow from the tips of matrix cracks at the 0°/90° interface. These delaminations contribute to further stiffness degradation of such laminates, and hence have to be taken into account in failure analysis models. The thickness of the 90° layer plays an important role; the thicker the 90° layer, the bigger stiffness reduction suggesting a size (volume) effect at ply level. In SiC/CAS cross-ply laminates reduction in the longitudinal modulus occurs mainly due to transverse cracks, while the shear modulus appears to be the most affected by the presence of longitudinal cracks. The shear modulus reduction ratio predicted previously by a semi-empirical formula is, in the most of cases, within 10% of the current ECM/2-D shear lag approach value. In some cases, though, the error of the semi-empirical finite element expression can be as big as 20% since it fails to capture damage mode interaction.     

Numerical Modeling of Combined Matrix Cracking and Delamination in Composite Laminates Using Cohesive Elements

Sub-laminate damage in the form of matrix cracking and delamination was simulated by using interface cohesive elements in the finite element (FE) software ABAQUS. Interface cohesive elements were inserted parallel to the fiber orientation in the transverse ply with equal spacing (matrix cracking) and between the interfaces (delamination). Matrix cracking initiation in the cohesive elements was based on stress traction separation laws and propagated under mixed-mode loading. We expanded the work of Shi et al. (Appl. Compos. Mater. 21, 57–70 2014) to include delamination and simulated additional [45/?45/0/90]_s and [0₂/90_n]_s {n?=?1,2,3} CFRP laminates and a [0/90₃]_s GFRP laminate. Delamination damage was quantified numerically in terms of damage dissipative energy. We observed that transverse matrix cracks can propagate to the ply interface and initiate delamination. We also observed for [0/90_n/0] laminates that as the number of 90° ply increases past n?=?2, the crack density decreases. The predicted crack density evolution compared well with experimental results and the equivalent constraint model (ECM) theory. Empirical relationships were established between crack density and applied stress by linear curve fitting. The reduction of laminate elastic modulus due to cracking was also computed numerically and it is in accordance with reported experimental measurements.     

Prediction of initiation of transverse cracks in cross-ply CFRP laminates under fatigue loading by fatigue properties of unidirectional CFRP in 90° direction

A fatigue life to the initiation of transverse cracks in cross-ply carbon fiber-reinforced plastic (CFRP) laminates has been predicted using properties of the fatigue strength of unidirectional CFRP in the 90° direction. In the experiments, unidirectional [90]₁₂ laminates were used to obtain a plot of maximum stress versus number of cycles to breaking, and two types of cross-ply laminates of [0/90₄]_S and [0/90₆]_S were used to evaluate the initiation and multiplication of transverse cracks under fatigue loading. Transverse cracks were studied by optical microscopy and soft X-ray photography. Analytical and experimental results showed good agreement, and the fatigue life for transverse crack initiation in cross-ply laminates was predicted successfully from the fatigue strength properties of the unidirectional CFRP in the 90° direction. The prediction results showed a conservative fatigue life than the experimental results.     

Simulation of fatigue performance of cross-ply composite laminates

The fatigue life of cross-ply composite laminates was evaluated using a statistical model. A modified shear-lag analysis was applied to describe the cycle-number-dependent stiffness reduction and consequent stress redistribution processes in the laminates resulted from both progressive transverse matrix cracking in transverse plies and local delamination at tips of transverse cracks. From the strength degradation behaviour and the static strength distribution of 0° plies as well as the fatigue behaviour of 90° plies, the fatigue life of cross-ply laminates with various types of lay-up can be simulated from the model. Predictions of fatigue performance are compared with experimental data for [0/90₂] _s , [02/90₂] _s and [0₂/90₄] _s graphite/epoxy cross-ply laminates: good agreements are obtained.     

Transverse matrix cracks in cross-ply laminates: Stress transfer, stiffness reduction and crack opening profiles

Summary Cross-ply laminates with transverse plies containing through-width matrix cracks across the thickness of the transverse plies are studied using an energy-based approach,complementary to that of Hashin. An upper bound on the effective axial stiffness of the cracked laminates with a uniform distribution of transverse cracks is derived. The equations governing the field variables in a typical RVE are derived using thelayerwise laminate theory of Reddy and are solved using the finite element method. The predicted reduction in the effective axial modulus is in good agreement with experimental results, and it approaches a fixed value with increase in crack density for laminates with bothstaggered andnon-staggered cracking. Laminates with staggered cracks showed a greater reduction in effective modulus at lower crack densities. The stress distribution and mechanics of load transfer is examined in detail, at two crack densities including the characteristic damage state. The crack opening profile has been normalized in a special way in terms of the crack density, layup parameters and material properties.     

Hygrothermal effects on the shear properties of carbon fiber/epoxy composites

The environmental factors, such as humidity and temperature, can limit the applications of composites by deteriorating the mechanical properties over a period of time. Environmental factors play an important role during the manufacture step and during composite’s life cycle. The degradation of composites due to environmental effects is mainly caused by chemical and/or physical damages in the polymer matrix, loss of adhesion at the fiber/matrix interface, and/or reduction of fiber strength and stiffness. Composite’s degradation can be measure by shear tests because shear failure is a matrix dominated property. In this work, the influence of moisture in shear properties of carbon fiber/epoxy composites (laminates [0/0]_s and [0/90]_s) have been investigated. The interlaminar shear strength (ILSS) was measured by using the short beam shear test, and Iosipescu shear strength and modulus (G ₁₂) have been determinated by using the Iosipescu test. Results for laminates [0/0]_s and [0/90]_s, after hygrothermal conditioning, exhibited a reduction of 21% and 18% on the interlaminar shear strenght, respectively, when compared to the unconditioned samples. Shear modulus follows the same trend. A reduction of 14.1 and 17.6% was found for [0/0]_s and [0/90]_s, respectively, when compared to the unconditioned samples. Microstructural observations of the fracture surfaces by optical and scanning electron microscopies showed typical damage mechanisms for laminates [0/0]_s and [0/90]_s.     

High-cycle fatigue characteristics of quasi-isotropic CFRP laminates over 10 cycles (Initiation and propagation of delamination considering interaction with transverse cracks)

High-cycle fatigue features of over 10⁸ cycles, particularly the initiation and propagation of edge delamination considering the effects of transverse cracks, were investigated using quasi-isotropic carbon-fiber-reinforced plastic (CFRP) laminates with a stacking sequence of [45/0/−45/90]_s in this study. In the relationship between a transverse crack density and initiation and growth of edge delamination, it was found that fatigue damage growth behavior varied depending on applied stress. It was observed that edge delamination initiated and grew at parts where transverse cracks were dense at ordinary applied stress, whereas it was observed that edge delamination grew before or simultaneously with transverse crack propagation at a low applied stress and high-cycle loading. In addition, the critical transverse crack density where delamination begins growing was calculated to evaluate the interaction between transverse crack and edge delamination growth.     

Damage Assessment of CFRP [90/±45/0] Composite Laminates over Fatigue Cycles

The present paper develops a stiffness-based model to characterize the progressive fatigue damage in quasi-isotropic carbon fiber reinforced polymer (CFRP) [90/±45/0] composite laminates with various stacking sequences. The damage model is constructed based on (i) cracking mechanism and damage progress in matrix (Region I), matrix-fiber interface (Region II) and fiber (Region III) and (ii) corresponding stiffness reduction of unidirectional plies of 90°, 0° and angle-ply laminates of ±45° as the number of cycles progresses. The proposed model accumulates damages of constituent plies constructing [90/±45/0] laminates by means of weighting factor η ₉₀, η ₀ and η ₄₅. These weighting factors were defined based on the damage progress over fatigue cycles within the plies 90°, 0° and ±45° of the composite laminates. Damage model has been verified using CFRP [90/±45/0] laminates samples made of graphite/epoxy 3501-6/AS4. Experimental fatigue damage data of [90/±45/0] composite laminates have fell between the predicted damage curves of 0°, 90° plies and ±45°, 0/±45° laminates over life cycles at various stress levels. Predicted damage results for CFRP [90/±45/0] laminates showed good agreement with experimental data. Effect of stacking sequence on the model of stiffness reduction has been assessed and it showed that proposed fatigue damage model successfully recognizes the changes in mechanism of fatigue damage development in quasi-isotropic composite laminates.     

Mechanical properties of cross-ply and quasi-isotropic composite laminates processed using aligned multi-walled carbon nanotube/epoxy prepreg

This study examined the processing and mechanical properties of cross-ply and quasi-isotropic composite laminates processed using aligned multi-walled carbon nanotube/epoxy prepreg sheets. Three kinds of CNT/epoxy laminates, ([0°/90°]s, [60°/0°/?60°]s, [0°/45°/90°/?45°]s) were successfully fabricated using aligned CNT/epoxy prepreg sheets. The CNT volume fraction was approximately 10%. No visible void or delamination was observed in composite laminates, and the thickness of each layer was almost equal to that of the prepreg. To evaluate the elastic moduli, E₁₁, E₂₂, and G₁₂, of each ply in the laminates, on-axis and off-axis tensile tests (0°, 45°, 90°) were conducted of aligned CNT/epoxy lamina specimens. The Young’s modulus of CNT/epoxy cross-ply and quasi-isotropic laminates agreed with the theoretical values, which were calculated using classical laminate theory and elastic moduli of CNT/epoxy lamina. The respective failure strains of [0°/90°]s, [60°/0°/?60°]s, and [0°/45°/90°/?45°]s laminates are 0.65, 0.92, 0.63%, which are higher than that of 0° composite lamina (0.5%). Results suggest that the failure strain of 0° layer in composite laminates is improved because of the other layers.     

Residual properties of notched [0/90]4S AS4/PEEK composite laminates after fatigue and re-consolidation

Notch fatigue strengthening under different cyclic stress levels and elapsed number of cycles has been studied in [0/90]_4S AS4/PEEK laminates. Quick and extensive 0° fiber splitting and the corresponding 90° fiber shear off were found to be the underlying causes of stress concentration alleviation. This effectively raised the residual strength of the notched laminates and increased their fatigue lives to beyond one million cycles. On the other hand, re-consolidation of fatigued specimens removed most of the internal damages and in the meantime reverses the above strengthening. Detailed study of the residual strength changes and damage development history using re-consolidation lent support to the above deductions on the notch fatigue strengthening phenomenon in [0/90]_4S AS/PEEK laminate.     

Characterization and evolution of matrix and interface related damage in [0/90]S laminates under tension. Part I: Numerical predictions

This paper considers damage development mechanisms in cross-ply laminates using an accurate numerical method that assumes a Generalized Plane Strain (GPS) state. A 2D Boundary Element Method (BEM) model is generated to investigate the two types of damage progression in a [0/90]_S laminate: transverse cracks in the 90° lamina and delamination between both laminae. The model permits the contact between the surfaces of the cracks. The study is carried out in terms of the dependence of the Energy Release Rates (ERR) of the two types of crack on their respective lengths. A special emphasis is put on the mechanisms of the joining of the two aforementioned types of crack, including the study of the distribution of the stresses along the interface between the two plies when the transverse crack is approaching this interface.     

The Effect of Crack Spacing Distribution on Stiffness Reduction of Cross-ply Laminates

The effect of transverse crack distribution on the effective mechanical properties of cross-ply laminates is considered. Young’s modulus and Poisson’s ratio dependence on the transverse ply crack density is obtained experimentally for glass fiber/epoxy laminates of lay-ups [0₂/90₂]_s, [0/90₂]_s, and [0/90₄]_s subjected to uniaxial tensile loading. Crack spacing distributions at the edge of the specimen are also measured at a predefined applied strain. Mechanical property reduction is evaluated for two crack spacing distributions: uniform spacing routinely considered in theoretical derivations and the experimental crack spacing distribution; the results are compared with test data.     

A generalized micromechanical approach for the analysis of transverse crack and induced delamination in composite laminates

The previously developed micromechanical approaches for the analysis of transverse cracking and induced delamination are limited for laminates with specific lay-ups such as cross-ply and specific loading conditions. In this paper a new micromechanical approach is developed to overcome such shortcomings. For this purpose, a unit cell in the ply level of composite laminate including transverse cracking and delamination is considered. Then, the governing equations for the stress and displacement fields of the unit cell are derived. The obtained approximate stress field is used to calculate the energy release rate for the propagation of transverse cracking and induced delamination. To show the capability of the new method, it is employed for the analyses of general laminates with [0/90]_s, [45/−45]_s, [30/−30]_s and [90/45/0/−45]_s lay-ups under combined loadings to calculate the energy release rate due to the transverse cracking and induced delamination. It is shown that the obtained energy release rates for transverse cracking and delamination initiation are in good agreement with the available results in the literature and finite element method. Furthermore, the occurrence priority of further transverse cracks and/or delamination at each damage state of the laminates will be discussed.     

Nonlinear constant fatigue life diagrams for carbon/epoxy laminates at room temperature

Exploration of a full shape of constant fatigue life (CFL) diagram and development of an efficient CFL diagram-based fatigue life prediction method are attempted for multidirectional CFRP laminates. On three kinds of CFRP laminates of [45/90/−45/0]_2s, [0/60/−60]_2s and [0/90]_3s lay-ups, tension–tension, tension–compression and compression–compression fatigue tests are performed at room temperature for two different stress ratios each. Experimental results clearly show that a stress ratio has a significant influence on the fatigue behavior of those CFRP laminates, and the CFL diagrams delineated using alternating stress and mean stress become asymmetric about the alternating stress axis. The alternating stress component of fatigue load for a given constant value of fatigue life turns maximum in the case of fatigue loading at a critical stress ratio that is nearly equal to the ratio of compressive strength to the tensile one. The shape of CFL diagrams progressively changes from a straight line to a nonlinear curve as a given constant value of fatigue life increases. A new and efficient method for accurately predicting an asymmetric nonlinear CFL diagram is then developed which is based on the static strengths in tension and compression and the reference S–N relationship fitted to the fatigue data for the critical stress ratio. The theoretical CFL diagram constructed following the proposed procedure agrees well with the experimental CFL diagram, regardless of the type of CFRP laminate. It is also demonstrated that the S–N relationships predicted using the proposed CFL diagram-based fatigue life prediction method adequately coincide with the experimental results for fatigue loading with a variety of different stress ratios in the range of fatigue life up to 10⁶ cycles.     

Damage evolution of angle-ply SCS-6/Ti composites under static and fatigue loading

The effect of fibre orientation and laminate stacking sequence on the tensile and fatigue behaviour of SCS-6/Ti 15-3 composites were investigated. The laminates used in this study were: (90)₆, (0/ ± 45)_s, (0/90)_s, and (90/ +-45)_s. The initiation and progression of microstructural damage at various stress levels was thoroughly characterized. It was found that fatigue life at high applied stresses were controlled by fibre fracture; progressive damage involving fibre fracture, interfacial debonding and matrix cracking became dominant at low applied stresses. Observation of the damage mechanisms in the angle-ply laminates under cyclic loading suggests that increasing the fibre-matrix bonding strength may improve the load carrying capability and fatigue life of laminates containing off-axis plies.     

Damage response of stitched cross-ply laminates under impact loadings

The impact response of stitched graphite/epoxy laminates was examined with the aim of evaluating the efficiency of stitching as a reinforcing mechanism able to improve the delamination resistance of laminates. The investigation, which focussed on two classes of cross-ply stacking sequences ([0₃/90₃]_s and [0/90]_3s), showed that the role of stitches in controlling damage progression of laminates and their capability to reduce the impact sensitivity of specimens are greatly dependent on the impact behaviour of base (unstitched) laminates. In [0₃/90₃]_s laminates, in particular, stitching is able to reduce damage area, on condition that the impact energy is higher than a threshold level and delaminations are sufficiently developed. In [0/90]_3s laminates, on the other hand, stress concentration regions generated by the stitching process appear to promote the initiation and propagation of fibre fractures, thereby inducing a decrease in the penetration resistance of the laminate.     

Nonlinear analysis of interlaminar stress in graphite/epoxy laminates with and without delamination cracks

A quasi three-dimensional yield function, which is quadratic in stresses except for σ₁₁, is proposed for graphite/epoxy composites. The elastic-plastic interlaminar stress response near a free edge in the [90/0]_s, [0/90]_s, and [45/−45]_s laminates with and without delamination cracks was investigated using the pseudo three-dimensional finite element technique. The plasticity model was evaluated by comparison with off-axis experimental data. Since shear response is the key element for nonlinear stress-strain behavior of graphite/epoxy composites, the plasticity theory predicts interlaminar stresses in the [45/−45]_s laminate significantly different from linear elasticity. Moreover, the existence of a delamination crack caused more plasticity effects on interlaminar stresses.     

Multi-directional stiffness degradation induced by matrix cracking in composite laminates

A model was developed for predicting the stiffness degradation of fiber reinforced plastics (FRP), with ply configuration [0_m/±θ_n]_S, induced by matrix cracking under in-plane tension. The model assumes that the cracks in off-axis plies are uniformly distributed and a damage variable D is defined. Based on the theory of fracture mechanics, the elastic moduli of cracked matrix are obtained and indicated by the damage variable D, then the reduction of elastic moduli of laminates caused by the matrix cracks was studied. Comparison with experimental values for the glass/epoxy [90₃/0]_S, [0/90]_S and [0/±45]_S laminates shows good agreement with the theoretical prediction given by the presented model.     

Fatigue behavior of carbon/epoxy composites under pretorsion and low‐energy impact effects

Abstract

This work presents a systematic study of the fatigue behavior and macroscopic analysis of carbon/epoxy [0/45/90/‐45]_2S quasi‐isotropic composite laminates. The failure mechanism and fatigue effects of the composites under pretorsional twist and low‐energy impact were investigated in this research. The coupling effects of the laminates under twist and low‐energy impact and the residual tensile strength and the S‐N curve under various stress levels were also studied.