Effect of relative humidity on the aerosolization and total inflammatory potential of fungal particles from dust‐inoculated gypsum boards

The aim of this study was to investigate the effect of relative humidity (RH) on the aerosolization and total inflammatory potential (TIP) of microbial particles released from gypsum boards inoculated with dust samples from homes. After microbial colonization, the gypsum boards were incubated at either high or low RH. The aerosolized particles (0.54–19.8 μm), culturable fungi, β‐glucan and the TIP of the aerosolized particles were quantified. Despite the colonization of several fungal groups, Penicillium dominated the aerosolized fraction. Higher emission rates of particles and culturable fungi were found from low RH compared with high RH in both the inhalable and particulate matter <1 μm (PM₁) fractions, and the TIP was accordingly higher. However, for the aerosolized fractions, the TIP or concentration β‐glucan relative to the number of fungi or particles present was higher from high RH compared with low RH. Despite the low number of culturable fungi in PM₁, this fraction showed a high TIP, and the concentration of β‐glucan correlated strongly with the TIP of this fraction. The individual particles of the aerosolized PM₁ fraction were more inflammatory than the larger particles of the inhalable fraction, and β‐glucan may be an important contributor to the inflammatory potential of the aerosolized particles.     

基于混凝土初始龄期及龄期衰减系数影响的氯离子二维扩散分析

在氯盐腐蚀及海洋环境下,钢筋混凝土结构耐久性研究的重点是确定氯离子在混凝土内部的扩散和积聚规律.在考虑混凝土材料龄期衰减系数和初始龄期等因素的基础上,提出了混凝土中氯离子二维扩散分析模型及其解析解,进而针对氯离子扩散系数具有时间和初始龄期依赖性的Fick第二定律的二维计算模型,建立了相应的二维有限元法数值分析格式,并讨论了混凝土龄期衰减系数、初始龄期及其扩散系数的时变性等因素对氯离子在混凝土中扩散和积聚规律的影响.     

An experimental study on the effect of ventilation velocity on burning rate in tunnel fires—heptane pool fire case

The 1/20 reduced-scale experiments using Froude scaling are conducted to investigate the effect of longitudinal ventilation velocity on the burning rate in tunnel fires. The n-heptane pool fires with heat release rate ranging from 3.71 to 15.6 kW are used in this study. A load cell is used to measure the mass loss rate of burning fuel and the temperature distributions are measured by K-type thermocouples in order to investigate smoke movement. The ventilation velocity in the reduced-scale tunnel is controlled by the wind tunnel through an inverter. The increases in ventilation velocity lead to enhance burning rate of n-heptane fuel. The reason is that the oxygen supply effect prevails rather than the cooling effect as the ventilation velocity increases. As a result, the heat release rates in experiment are larger than constant heat release rates by 4.45–11.3 times in the n-heptane pool fires. Also, it is found that non-dimensional critical ventilation velocity is proportional to one-third power of non-dimensional heat release rate.     

A study on a porous residential building model in hot and humid regions: Part 1—the natural ventilation performance and the cooling load reduction effect of the building model

This study targets environmental load reduction in hot and humid regions. It reveals the effects that porous residential buildings have on the natural ventilation performance and, consequently, the cooling load reduction. Two residential building models, namely a model with a void ratio of 0% and a model with a void ratio of 50%, are evaluated using computational fluid dynamics (CFD) analysis and thermal and airflow network analysis. The analysis on components of the heat load indicates that improvements in the natural ventilation performance would significantly reduce the cooling load.     

The effect of a redesigned floor plan, occupant density and the quality of indoor climate on the cost of space, productivity and sick leave in an office building–A case study

The aim of this study was to examine changes in the overall costs of an office when the efficiency of space use is increased. The variable in the examination was a space index, calculated as the floor area per employee. The quality of indoor climate was also a variable in the analysis. The overall cost analysis of a given case building showed that when space use is boosted significantly, measures must be taken to guarantee a sufficient quality of indoor climate. The study indicates that investment in the quality of indoor climate is cost-effective when the economic effect of indoor climate to health and productivity are taken into account in addition to the costs of investment, operation and maintenance. Insufficient ventilation without mechanical cooling may cause a substantial loss of productivity. The importance of good ventilation and air-conditioning increases with a more efficient use of space especially in conjunction with high value of work.