Investigation of volatile organic compounds in office buildings in Bangkok,Thailand: Concentrations,sources, and occupant symptoms

To conserve energy, office buildings with air-conditioning systems in Thailand are operated with a tight thermal envelope. This leads to low fresh-air ventilation rates and is thought to be partly responsible for the sick building syndrome symptoms reported by occupants. The objectives of this study are to measure concentrations and to determine sources of 13 volatile organic compounds (VOCs) in office buildings with air-conditioning systems in the business area of Bangkok. Indoor and outdoor air samples from 17 buildings were collected on Tenax-TA^™ sorbent tubes and analyzed for individual VOCs by thermal desorption-gas chromatography/mass spectrometry (TD–GC/MS). Building ventilation was measured with a constant injection technique using hexafluorobenzene as a tracer gas. The results show that the VOC concentrations varied significantly among the studied buildings. The two most dominant VOCs were toluene and limonene with average concentrations of 110 and 60.5 μg m⁻³, respectively. A Wilcoxon sum rank test indicated that the indoor concentrations of aromatic compounds and limonene were statistically higher than outdoor concentrations at the 0.05 level, while the indoor concentrations of chlorinated compounds were not. Indoor emission factors of toluene and limonene were found to be highest with the average values of 80.9 and 18.9 μg m⁻² h⁻¹, respectively. Principal component analysis was applied to the emission factors of 13 VOCs, producing three components based on source similarities. Furthermore, a questionnaire survey investigation and field measurements of building air exchange pointed to indoor air complaints related to inadequate ventilation.     

Quantification of the impact of cooking processes on indoor concentrations of volatile organic species and primary and secondary organic aerosols

Cooking is recognized as an important source of particulate pollution in indoor and outdoor environments. We conducted more than 100 individual experiments to characterize the particulate and non‐methane organic gas emissions from various cooking processes, their reaction rates, and their secondary organic aerosol yields. We used this emission data to develop a box model, for simulating the cooking emission concentrations in a typical European home and the indoor gas‐phase reactions leading to secondary organic aerosol production. Our results suggest that about half of the indoor primary organic aerosol emission rates can be explained by cooking. Emission rates of larger and unsaturated aldehydes likely are dominated by cooking while the emission rates of terpenes are negligible. We found that cooking dominates the particulate and gas‐phase air pollution in non‐smoking European households exceeding 1000 μg m^?3. While frying processes are the main driver of aldehyde emissions, terpenes are mostly emitted due to the use of condiments. The secondary aerosol production is negligible with around 2 μg m^?3. Our results further show that ambient cooking organic aerosol concentrations can only be explained by super‐polluters like restaurants. The model offers a comprehensive framework for identifying the main parameters controlling indoor gas‐ and particle‐phase concentrations.     

Formaldehyde and acetaldehyde exposure mitigation in US residences: in‐home measurements of ventilation control and source control

Measurements were taken in new US residences to assess the extent to which ventilation and source control can mitigate formaldehyde exposure. Increasing ventilation consistently lowered indoor formaldehyde concentrations. However, at a reference air exchange rate of 0.35 h^?1, increasing ventilation was up to 60% less effective than would be predicted if the emission rate were constant. This is consistent with formaldehyde emission rates decreasing as air concentrations increase, as observed in chamber studies. In contrast, measurements suggest acetaldehyde emission was independent of ventilation rate. To evaluate the effectiveness of source control, formaldehyde concentrations were measured in Leadership in Energy and Environmental Design (LEED)‐certified/Indoor airPLUS homes constructed with materials certified to have low emission rates of volatile organic compounds (VOC). At a reference air exchange rate of 0.35 h^?1, and adjusting for home age, temperature and relative humidity, formaldehyde concentrations in homes built with low‐VOC materials were 42% lower on average than in reference new homes with conventional building materials. Without adjustment, concentrations were 27% lower in the low‐VOC homes. The mean and standard deviation of formaldehyde concentration was 33 μg/m³ and 22 μg/m³ for low‐VOC homes and 45 μg/m³ and 30 μg/m³ for conventional.     

On-site passive flux sampler measurement of emission rates of carbonyls and VOCs from multiple indoor sources

In indoor environments with high levels of air pollution, it is desirable to remove major sources of emissions to improve air quality. In order to identify the emission sources that contribute most to the concentrations of indoor air pollutants, we used passive flux samplers (PFSs) to measure emission rates of carbonyl compounds and volatile organic compounds (VOCs) from many of the building materials and furnishings present in a room in a reinforced concrete building in Tokyo, Japan. The emission flux of formaldehyde from a desk was high (125 μg/m²/h), whereas fluxes from a door and flooring were low (21.5 and 16.5 μg/m²/h, respectively). The emission fluxes of toluene from the ceiling and the carpet were high (80.0 and 72.3 μg/m²/h, respectively), whereas that from the flooring was low (9.09 μg/m²/h). The indoor and outdoor concentrations of formaldehyde were 61.5 and 8.64 μg/m³, respectively, and those of toluene were 43.2 and 17.5 μg/m³, respectively. The air exchange rate of the room as measured by the perfluorocarbon tracer (PFT) method was 1.84/h. Taking into consideration the area of the emission sources, the carpet, ceiling, and walls were identified as the principal emission sources, contributing 24%, 20%, and 22% of the formaldehyde, respectively, and 22%, 27%, and 14% of the toluene, respectively, assuming that the emission rate from every major emission sources could be measured. In contrast, the door, the flooring, and the desk contributed little to the indoor levels of formaldehyde (1.0%, 0.54%, and 4.1%, respectively) and toluene (2.2%, 0.31%, and 0.85%, respectively).     

Exposure to fine particulate matter in ten night clubs in Athens Greece: Studying the effect of ventilation, cigarette smoking and resuspension

The aim of the present work is to study the occupants' exposure to fine particulate concentrations in ten nightclubs (NCs) in Athens, Greece. Measurements of PM₁ and PM_2.5 were made in the outdoor and indoor environment of each NC. The average indoor PM₁ and PM_2.5 concentrations were found to be 181.77 μg m^− 3 and 454.08 μg m^− 3 respectively, while the corresponding outdoor values were 11.04 μg m^− 3 and 32.19 μg m^− 3. Ventilation and resuspension rates were estimated through consecutive numerical experiments with an indoor air quality model and were found to be remarkably lower than the minimum values recommended by national standards. The relative effects of the ventilation and smoking on the occupants' exposures were examined using multiple regression techniques. It was found that given the low ventilation rates, the effect of smoking as well as the occupancy is of the highest importance. Numerical evaluations showed that if the ventilation rates were at the minimum values set by national standards, then the indoor exposures would be reduced at the 70% of the present exposure values.     

Infiltration of fine particles in urban daycares

Singapore is a tropical country with a high density of day-care facilities whose indoor environments may be adversely affected by outdoor fine particle (PM_2.5) air pollution. To reduce this problem requires effective, evidence-based exposure-reduction strategies. Little information is available on the penetration of outdoor PM_2.5 into day-care environments. Our study attempted to address the following objectives: to measure indoor infiltration factor (F_inf) of PM_2.5 from outdoor PM_2.5 and to determine the building parameters that modify the indoor PM_2.5. We collected indoor/outdoor 1-min PM_2.5 from 50 day-care classrooms. We noted mean F_inf ± SD of 0.65 ± 0.22 in day-care rooms which are naturally ventilated and lower F_inf ± SD values of 0.47 ± 0.18 for those that are air-conditioned: values which are lower than those reported in Singapore residences. The air exchange rates were higher in naturally ventilated rooms (1.47 vs 0.86 h⁻¹). However, fine particle deposition rates were lower for naturally ventilated rooms (0.67 ± 0.43 h⁻¹) compared with air-conditioned ones (1.03 ± 0.55 h⁻¹) presumably due to composite rates linked to the filters within the split unit air-conditioners, higher recirculation rates, and interior surfaces in the latter. Our findings indicate that children remaining indoor in daycares where air-conditioning is used can reduce their PM_2.5 exposures during outdoor pollution episodes.     

Household and behavioral determinants of indoor PM2.5 in a rural solid fuel burning Native American community

Indoor and outdoor concentrations of PM_2.5 were measured for 24 h during heating and non-heating seasons in a rural solid fuel burning Native American community. Household building characteristics were collected during the initial home sampling visit using technician walkthrough questionnaires, and behavioral factors were collected through questionnaires by interviewers. To identify seasonal behavioral factors and household characteristics associated with indoor PM_2.5, data were analyzed separately by heating and non-heating seasons using multivariable regression. Concentrations of PM_2.5 were significantly higher during the heating season (indoor: 36.2 μg/m³; outdoor: 22.1 μg/m³) compared with the non-heating season (indoor: 14.6 μg/m³; outdoor: 9.3 μg/m³). Heating season indoor PM_2.5 was strongly associated with heating fuel type, housing type, indoor pests, use of a climate control unit, number of interior doors, and indoor relative humidity. During the non-heating season, different behavioral and household characteristics were associated with indoor PM_2.5 concentrations (indoor smoking and/or burning incense, opening doors and windows, area of surrounding environment, building size and height, and outdoor PM_2.5). Homes heated with coal and/or wood, or a combination of coal and/or wood with electricity and/or natural gas had elevated indoor PM_2.5 concentrations that exceeded both the EPA ambient standard (35 μg/m³) and the WHO guideline (25 μg/m³).     

Exposure and cancer risk assessment for formaldehyde and acetaldehyde in the hospitals,Fortaleza-Brazil

The levels of internal and external concentrations of formaldehyde and acetaldehyde, as well as occupational risk based on individual exposure to and potential carcinogenic effects of these, were evaluated in eight environments of two hospitals in the city of Fortaleza-CE during September and October of 2009. The results depicted a variation of 1.98–24.87 μg m⁻³ formaldehyde and of 9.38–55.10 μg m⁻³ acetaldehyde; the main sources of emissions were internal. The exposure levels showed values above the allowable limits for some of the environments studied (permissible exposure limits estimated as an 8-h time-weighted average (PEL-TWA)). The estimation of total cancer risk is of a similar magnitude to other studies, and the risk is 12–18% greater for women than men.     

Particle characterization in retail environments: concentrations,sources, and removal mechanisms

Particles in retail environments can have consequences for the occupational exposures of retail workers and customers, as well as the energy costs associated with ventilation and filtration. Little is known about particle characteristics in retail environments. We measured indoor and outdoor mass concentrations of PM₁₀ and PM_2.5, number concentrations of submicron particles (0.02–1 μm), size‐resolved 0.3–10 μm particles, as well as ventilation rates in 14 retail stores during 24 site visits in Pennsylvania and Texas. Overall, the results were generally suggestive of relatively clean environments when compared to investigations of other building types and ambient/occupational regulatory limits. PM₁₀ and PM_2.5 concentrations (mean ± s.d.) were 20 ± 14 and 11 ± 10 μg/m³, respectively, with indoor‐to‐outdoor ratios of 1.0 ± 0.7 and 0.88 ± 1.0. Mean submicron particle concentrations were 7220 ± 7500 particles/cm³ with an indoor‐to‐outdoor ratio of 1.18 ± 1.30. The median contribution to PM₁₀ and PM_2.5 concentrations from indoor sources (vs. outdoors) was 83% and 53%, respectively. There were no significant correlations between measured ventilation rates and particle concentrations of any size. When examining options to lower PM_2.5 concentrations below regulatory limits, the required changes to ventilation and filtration efficiency were site specific and depended on the indoor and outdoor concentration, emission rate, and infiltration level.     

Exposure of children to airborne particulate matter of different size fractions during indoor physical education at school

Although moderate regular aerobic exercise is recommended for good health, adverse health consequences may be incurred by people who exercise in areas with high ambient pollution, such as in the centres of large cities with dense traffic. The exposure of children during exercise is of special concern because of their higher sensitivity to air pollutants. The size-segregated mass concentration of particulate matter was measured in a naturally ventilated elementary school gym during eight campaigns, seven to ten days long, from November 2005 through August 2006 in a central part of Prague (Czech Republic). The air was sampled using a five-stage cascade impactor. The indoor concentrations of PM_2.5 recorded in the gym exceeded the WHO recommended 24-hour limit of 25 μg m⁻³ in 50% of the days measured. The average 24-h concentrations of PM_2.5 (24.03 μg m⁻³) in the studied school room did not differ much from those obtained from the nearest fixed site monitor (25.47 μg m⁻³) and the indoor and ambient concentrations were closely correlated (correlation coefficient 0.91), suggesting a high outdoor-to-indoor penetration rate. The coarse indoor fraction concentration (PM_2.5–10) was associated with the number of exercising pupils (correlation coefficient 0.77), indicating that human activity is its main source. Considering the high pulmonary ventilation rate of exercising children and high outdoor particulate matter concentrations, the levels of both coarse and fine aerosols may represent a potential health risk for sensitive individuals during their physical education performed in naturally ventilated gyms in urban areas with high traffic intensity.     

Particle‐associated polycyclic aromatic hydrocarbons in a representative urban location (indoor‐outdoor) from South Europe: Assessment of potential sources and cancer risk to humans

PM₁₀‐bound polycyclic aromatic hydrocarbons (PAHs) levels were monitored at urban locations (outdoor/indoor) within the city of Madrid between May 2017 and April 2018. Fourteen PAH congeners were measured, potential emission sources were identified as were potential carcinogenic risks. The ΣPAHs averaged 0.577 and 0.186 ng/m³ in outdoor and indoor air, with a high linear correlation per individual mean PAH and month. The largest contributors to the ΣPAHs were the high‐molecular‐weight PAHs. Principal component analysis‐multiple linear regression results showed that emissions from diesel and vehicular processes explained 27% and 23% of the total variance of outdoor and indoor air, while combustion processes accounted for 30% and 25% in ambient and indoor air, respectively. During the cold season, biomass burning plus coal and wood combustion were additional sources of outdoor emissions. The heavy‐, medium‐ and light‐molecular‐weight PAH originating from outdoor sources accounted for 72%, 80%, and ~60% of the indoor levels of the three respective PAH groups. Average BaP concentration was 0.029 and 0.016 ng/m³ in outdoor and indoor air, respectively. Estimated BaPeq concentration averaged 0.072, 0.035, and 0.027 ng/m³ for outdoor, indoor, and indoor‐generated individual PAH concentrations, respectively. The estimated carcinogenic risk falls within the range of acceptable risk targeted by the US‐EPA.     

Spatial variations on methane emissions from Zoige alpine wetlands of Southwest China

This study was aimed to understand the spatial variation of CH₄ emissions from alpine wetlands in Southwest China on a field-scale in two phenological seasons, namely the peak growing season and the spring thaw. Methane emission rates were measured at 30 plots, which included three kinds of environmental types: dry hummock, Carex muliensis and Eleocharis valleculosa sites. There were highly spatial variations of methane emissions among and within different environmental types in both phenological seasons. Mean methane emission rates ranged from 1.1 to 37.0 mg CH₄ m^− 2 h^− 1 in the peak growing season and from 0.004 to 0.691 mg CH₄ m^− 2 h^− 1 in the spring thaw. In the peak growing season, coefficients of variation (CV) averaged 38% among environmental types and 64% within environmental types; while in the spring thaw, CV were on the average 61% among environmental types and 96% within environmental types. The key influencing factors were the standing water table and the plant community height in the peak growing season, while in the spring thaw, no significant correlations between factors and methane emissions were found.     

Nitrous oxide production kinetics during nitrate reduction in river sediments

A significant amount of nitrogen entering river basins is denitrified in riparian zones. The aim of this study was to evaluate the influence of nitrate and carbon concentrations on the kinetic parameters of nitrate reduction as well as nitrous oxide emissions in river sediments in a tributary of the Marne (the Seine basin, France). In order to determine these rates, we used flow-through reactors (FTRs) and slurry incubations; flow-through reactors allow determination of rates on intact sediment slices under controlled conditions compared to sediment homogenization in the often used slurry technique. Maximum nitrate reduction rates (R_m) ranged between 3.0 and 7.1 μg N g⁻¹ h⁻¹, and affinity constant (K_m) ranged from 7.4 to 30.7 mg N-NO₃⁻ L⁻¹. These values were higher in slurry incubations with an R_m of 37.9 μg N g⁻¹ h⁻¹ and a K_m of 104 mg N-NO₃⁻ L⁻¹. Nitrous oxide production rates did not follow Michaelis-Menten kinetics, and we deduced a rate constant with an average of 0.7 and 5.4 ng N g⁻¹ h⁻¹ for FTR and slurry experiments respectively. The addition of carbon (as acetate) showed that carbon was not limiting nitrate reduction rates in these sediments. Similar rates were obtained for FTR and slurries with carbon addition, confirming the hypothesis that homogenization increases rates due to release of and increasing access to carbon in slurries. Nitrous oxide production rates in FTR with carbon additions were low and represented less than 0.01% of the nitrate reduction rates and were even negligible in slurries. Maximum nitrate reduction rates revealed seasonality with high potential rates in fall and winter and low rates in late spring and summer. Under optimal conditions (anoxia, non-limiting nitrate and carbon), nitrous oxide emission rates were low, but significant (0.01% of the nitrate reduction rates).     

Particle concentrations and effectiveness of free-standing air filters in bedrooms of children with asthma in Detroit,Michigan

Asthma can be exacerbated by environmental factors including airborne particulate matter (PM) and environmental tobacco smoke (ETS). We report on a study designed to characterize PM levels and the effectiveness of filters on pollutant exposures of children with asthma. 126 households with an asthmatic child in Detroit, Michigan, were recruited and randomized into control or treatment groups. Both groups received asthma education; the latter also received a free-standing high efficiency air filter placed in the child’s bedroom. Information regarding the home, emission sources, and occupant activities was obtained using surveys administered to the child’s caregiver and a household inspection. Over a one week period, we measured PM, carbon dioxide (CO₂), environmental tobacco smoke (ETS) tracers, and air exchange rates (AERs). Filters were installed at midweek. Before filter installation, PM concentrations averaged 28 μg m⁻³, number concentrations averaged 70,777 and 1471 L⁻¹ in 0.3–1.0 and 1–5 μm size ranges, respectively, and the median CO₂ concentration was 1018 ppm. ETS tracers were detected in 23 of 38 homes where smoking was unrestricted and occupants included smokers and, when detected, PM concentrations were elevated by an average of 15 μg m⁻³. Filter use reduced PM concentrations by an average of 69–80%. Simulation models representing location conditions show that filter air flow, room volume and AERs are the key parameters affecting PM removal, however, filters can achieve substantial removal in even "worst" case applications. While PM levels in homes with asthmatic children can be high, levels can be dramatically reduced using filters.     

Ventilation rates in the bedrooms of 500 Danish children

The ongoing “Indoor Environment and Children’s Health” (IECH) study investigates the environmental risk factors in homes and their association with asthma and allergy among children aged 1–5 years. As part of the study, the homes of 500 children between 3 and 5 years of age were inspected. The selected children included 200 symptomatic children (cases) and 300 randomly selected children (bases). As part of the inspection, the concentration of carbon dioxide in the bedrooms of the children was continuously measured over an average of 2.5 days. The ventilation rates in the rooms during the nights when the children were sleeping in the room were calculated using a single-zone mass balance for the occupant-generated CO₂. The calculated air change rates were log-normally distributed (R² > 0.98). The geometric mean of the air change rates in both the case and the base group was 0.46 air changes per hour (h⁻¹; geom. SD = 2.08 and 2.13, respectively). Approximately 57% of both cases and bases slept at a lower ventilation rate than the minimum required ventilation rate of 0.5 h⁻¹ in new Danish dwellings. Only 32% of the bedrooms had an average CO₂ concentration below 1000 ppm during the measured nights. Twenty-three percent of the rooms experienced at least a 20-minute period during the night when the CO₂ concentration was above 2000 ppm and 6% of the rooms experienced concentrations above 3000 ppm. The average air change rate was higher with more people sleeping in the room. The air change rate did not change with the increasing outdoor temperature over the 10-week experimental period. The calculation method provides an estimate of the total airflow into the bedroom, including airflows both from outdoors and from adjacent spaces. To study the accuracy of the calculated air change rates and their deviation from the true outside air change rates, we calculated CO₂ concentrations at different given air change rates using an indoor air quality and ventilation model (Contam). Subsequently we applied our calculation procedure to the obtained data. The air change rate calculated from the generated CO₂ concentrations was found to be between 0% and 51% lower than the total air change rate defined in the input variables for the model. It was, however, higher than the true outside air change rate. The relative error depended on the position of the room in relation to the adjacent rooms, occupancy in the adjacent room, the nominal air change rate and room-to-room airflows.     

Seasonal and diurnal variations of carbonyl compounds in the urban atmosphere of Guangzhou, China

Seasonal and diurnal variations of carbonyl compounds were investigated at two sampling sites (Liwan and Wushan) in the ambient air of Guangzhou, China. Air samples were collected during 2005 from January to November, and carbonyl compounds were analyzed with HPLC. The results show that carbonyls exhibit distinct seasonal variation. The total concentrations of 21 carbonyls detected ranged from 2.64 to 103.6 μg m⁻³ at Liwan and from 5.46 to 89.9 μg m⁻³ at Wushan, respectively. The average total concentrations of carbonyls at both Liwan and Wushan decreased in order of summer>spring>autumn>winter. Formaldehyde, acetaldehyde, and acetone were the most abundant carbonyl compounds, which accounted for more than 60% of the total concentrations of carbonyls. The mean concentration ratios of summer/winter were all > 1.0 for the total concentrations and the individual carbonyl compound. The diurnal variation of carbonyls was not distinct in this study. The average concentration ratios of formaldehyde/acetaldehyde (C₁/C₂) varied from 0.71 to 1.32 and 0.65 to 1.14 at Liwan and Wushan, respectively, and the average concentration ratios of acetaldehyde/propionaldehyde (C₂/C₃) varied from 5.42 to 7.70 and 5.02 to 13.9 in Liwan and Wushan, respectively. Regarding photochemical reactivity of carbonyls and the ozone production, acetaldehyde, butyraldehyde, formaldehyde, and valeraldehyde account for 75-90% to the total propene-equivalent concentrations, while formaldehyde, acetaldehyde, valeraldehyde, butyraldehyde, and propionaldehyde contribute 89-96% to the total ozone formation potentials (ranging from 105 to 274 μg m^-3). The ozone formation potentials in summer were higher by 1-2 times than those in the other seasons.     

Seasonal variability in environmental tobacco smoke exposure in public housing developments

The risk of tobacco smoking and second‐hand smoke (SHS) exposure combined are the leading contributors to disease burden in high‐income countries. Recent studies and policies are focusing on reducing exposure to SHS in multiunit housing (MUH), especially public housing. We examined seasonal patterns of SHS levels within indoor common areas located on Boston Housing Authority (BHA) properties. We measured weekly integrated and continuous fine particulate matter (PM_2.5) and passive airborne nicotine in six buildings of varying building and occupant characteristics in summer 2012 and winter 2013. The average weekly indoor PM_2.5 concentration across all six developments was 9.2 μg/m³, higher during winter monitoring period (10.3 μg/m³) compared with summer (8.0 μg/m³). Airborne nicotine concentrations ranged from no detection to about 5000 ng/m³ (mean 311 ng/m³). Nicotine levels were significantly higher in the winter compared with summer (620 vs. 85 ng/m³; 95% CI: 72–998). Smoking‐related exposures within Boston public housing vary by season, building types, and resident smoking policy. Our results represent exposure disparities that may contribute to health disparities in low‐income communities and highlight the potential importance of efforts to mitigate SHS exposures during winter when outdoor–indoor exchange rates are low and smokers may tend to stay indoors. Our findings support the use of smoke‐free policy as an effective tool to eliminate SHS exposure and protect non‐smokers, especially residents of MUH.     

Carbonyl compounds in gas and particle phases of mainstream cigarette smoke

Carbonyl compounds (carbonyls) are important constituents of cigarette smoke and some are toxic and may be carcinogenic or mutagenic to humans. In this study carbonyl emissions in the gas and particle phases of mainstream cigarette smoke were assessed by GC-MS with pentafluorophenyl hydrazine (PFPH) derivatization. Seven brands of cigarettes and one brand of cigar common in the UK market and having differing nicotine, tar and carbon monoxide yields were investigated. Sixteen carbonyl components were identified in gaseous emissions and twenty in the particle phase. In the gaseous emissions, acetaldehyde presented as the predominant species, followed by formaldehyde, 2-propenal, and pentanal. In the particulate emissions, 1-hydroxy-2-propanone was the most abundant followed by formaldehyde, benzaldehyde, and 2,5-dimethylbenzaldehyde. Significant differences were found in carbonyl emissions among the brands of cigarettes. The gaseous carbonyl emissions varied in the range of 216-405 μg cigarette⁻¹ (μg cig⁻¹) and the particulate carbonyl emissions varied in the range of 23-127 μg cig⁻¹. Positive correlations were found between the total emission of carbonyls, tar yield and carbon monoxide yield. Similar gas/particle (G/P) partitioning ratios of carbonyls were found among all cigarettes, which implies that G/P partitions of carbonyls in smoke mainly depend on the physical properties of the carbonyls. The gaseous carbonyl emissions were enhanced by 40% to 130% when some of the water, accounting for 8-12% of cigarettes in mass, was removed from the tobacco. Non-filtered cigarettes showed significantly higher carbonyl emissions compared to their filtered equivalents. Carbonyl particulate accounted for 11-19% by mass of total particulate matter from tobacco smoke. The cigar generated 806 μg cig⁻¹ gaseous and 141 μg cig⁻¹ particulate carbonyls, which is 2-4 times greater than the cigarettes.     

The effect of a photocatalytic air purifier on indoor air quality quantified using different measuring methods

The effect on indoor air quality of an air purifier based on photocatalytic oxidation (PCO) was determined by different measuring techniques: sensory assessments of air quality made by human subjects, Proton-Transfer-Reaction Mass Spectrometry (PTR-MS) and chromatographic methods (Gas Chromatography/Mass Spectrometry and High-Pressure Liquid Chromatography with UV detection). The experiment was conducted in a simulated office, ventilated with 0.6 h⁻¹, 2.5 h⁻¹ and 6 h⁻¹, in the presence of additional pollution sources (carpet, chipboard and linoleum). At the lowest air change rate, additional measurements were made with no pollution sources present in the office. All conditions were tested with the photocatalytic air purifier turned on and off. The results show that operation of the air purifier in the presence of pollutants emitted by building materials and furniture improves indoor air quality, as documented by sensory assessments made by human subjects. It also reduces concentrations of many chemical compounds present in the air as documented by the PTR-MS technique. For the lowest ventilation, results from measurements using the chromatographic methods have similar tendency, however many of the 50 compounds that were targeted for analysis were not detected at all, independent of whether the purifier was on or off. For the two conditions with higher ventilation the results were inconclusive.