Electrochemical thinning of thicker gold film with qualified thickness for surface plasmon resonance sensing

To meet the requirement of surface plasmon resonance (SPR) sensing, controlling the thickness of the gold film is very important. Here, we report an efficient and simple approach to prepare a SPR-active substrate when the thickness of the gold film is larger than the optimizing 50 nm and smaller than 100 nm. This method is based on anodic electrodissolution of gold in electrolyte containing chloride ions. Using this method, the thickness of gold films can be easily changed at a nanometer scale by controlling the number of potential scans and the concentrations of chloride ions in the electrolyte. At the same time, the influence of gold film thickness on the SPR signal is recorded by SPR in real time. To assess the change of the surface roughness and morphology of gold film through anodic electrodissolution, atomic force microscopy was used. The surface roughness of the same Au film before and after anodic electrodissolution is 1.179 and 2.767 nm, respectively. The change of the surface roughness of Au film brings out a slight angle shift of SPR. This indicates that surface electrodissolution of the gold does not affect the character of the original bulk film and this film can be used for SPR experiments. To confirm our expectation, a simple adsorption experiment of cytochrome c (Cyt c) on the gold film treated with anodic electrodissolution modified by 11-mercaptoundecanic acid was carried out. The angle shift of SPR confirmed the adsorption of Cyt c, and the cyclic voltammetry of Cyt c provided a complementary confirmation for the adsorption of Cyt c. These results show that this approach provides a good way to change the thicker gold film to an optimized thickness of SPR sensing. The great advantage brought by this approach is in that it can convert the waste gold films with greater thicknesses fabricated by the vacuum deposition method or other methods into useful materials as active SPR substrates.     

金属纳米颗粒在表面等离激元共振生物传感器上的应用

文章研究不同形状和长径比的金属纳米颗粒应用在表面等离激元共振（SPR）生物传感器中对传感信号的影响,自制金属纳米颗粒并进行物理表征,以金纳米颗粒与抗兔IgG进行生物偶联,利用自制角度检测型SPR生物传感器对兔IgG抗体进行检测,结果表明,金属颗粒的形状和长径比对SPR传感器的共振角都有影响,金纳米棒能够明显提高SPR生物传感器的检测灵敏度。     

Detection of phosphopeptides by localized surface plasma resonance of titania-coated gold nanoparticles immobilized on glass substrates

We herein demonstrate a new sensing method for phosphopeptides by localized surface plasmon resonance (LSPR) using titania-coated gold nanoparticles immobilized on the surface of a glass slide as the sensing substrate and using UV-visible spectrophotometry as the detection tool. Titania has been known to be an effective substrate for binding with phosphorylated species. The detection principle is the shift of wavelength of optical absorption due to SPR of the gold nanoparticles induced by binding of phosphorylated species with titania on the surface of the gold nanoparticles. The feasibility of the approach is demonstrated by detection of tryptic digest products of beta-casein and milk. Gold nanoparticles coated with thin films of titania, immobilized on a glass slide, can selectively bind traces of phosphopeptides from complex samples, resulting in a wavelength shift of the absorption band in the SPR spectrum with good reproducibility. The LSPR results are confirmed by matrix-assisted laser desorption/ionization mass spectrometry. The detection limit for the tryptic digest product of beta-casein is 50 nM.     

Determination of Cu2+ using poly(2-aminothiazole)/ multi-walled carbon nanotubes composite film modified glassy carbon electrodes

2-Aminothiazole was electropolymerized by cyclic voltammetry (CV) on the multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE) surface. Poly(2-aminothiazole)/MWCNTs/GCE was used for determination of copper ions. The anodic peak currents of copper ions evaluated by differential pulse stripping voltammetry (DPSV) are linear with the concentrations in the range from 1.0 x 10(-7) M to 2.0 x 10(-5) M with a linear coefficiency of 0.9985. The detection limit is 2.0 x 10(-9) M calculated for a signal-to-noise ratio of 3 (S/N = 3). The proposed method was applied successfully to the determination of copper ions in drinking water, and the recovery was 96%.     

SPR sensor chip for detection of small molecules using molecularly imprinted polymer with embedded gold nanoparticles

Molecularly imprinted polymer gel with embedded gold nanoparticle was prepared on a gold substrate of a chip for a surface plasmon resonance (SPR) sensor for fabricating an SPR sensor sensitive to a low molecular weight analyte. The sensing is based on swelling of the imprinted polymer gel that is triggered by an analyte binding event within the polymer gel. The swelling causes greater distance between the gold nanoparticles and substrate, shifting a dip of an SPR curve to a higher SPR angle. The polymer synthesis was conducted by radical polymerization of a mixture of acrylic acid, N-isopropylacrylamide, N,N'-methylenebisacrylamide, and gold nanoparticles in the presence of dopamine as model template species on a sensor chip coated with allyl mercaptan. The modified sensor chip showed an increasing SPR angle in response to dopamine concentration, which agrees with the expected sensing mechanism. Furthermore, the gold nanoparticles were shown to be effective for enhancing the signal intensity (the change of SPR angle) by comparison with a sensor chip immobilizing no gold nanoparticles. The analyte binding process and the consequent swelling appeared to be reversible, allowing one the repeated use of the presented sensor chip.     

Application of disorganized monolayer films on gold electrodes to the prevention of surfactant inhibition of the voltammetric detection of trace metals via anodic stripping of underpotential deposits: detection of copper

Development of an approach to prevention of electrode surface fouling by surfactants in samples is demonstrated. Spontaneously adsorbed monolayer systems employing short alkyl chains and bulky end groups are used to form porous disorganized monolayers on gold electrodes. Detection of copper by stripping of underpotential deposits formed at electrodes modified with disorganized films of mercaptoethanesulfonate (MES), mercaptopropanesulfonate, mercaptoacetic acid, and mercaptopropanoic acid was possible, and to a much lesser extent at aminoethanethiol and L-cysteine films. Use of short deposition times in conjunction with linear sweep anodic stripping voltammetry allowed detection of Cu2+ ions down to 1 x 10(-6) M in sulfuric acid solution, using underpotential deposition as the deposition step of the procedure. Calibration graphs were linear in the concentration range (1-80) x 10(-6) M Cu2+ using 15-s deposition at 0.00 V versus Ag/AgCl. The surfactants Tween 20, Tween 80, and Triton X-100 were found to have no affect on detection of Cu2+ ions in the calibration curve concentration range using MES-modified gold electrodes, whereas at unmodified gold electrodes very severe attenuation of the detection capability was manifested. The average slope for all calibration curves at the MES-modified electrode in the absence and presence of the surfactants at two different concentration levels was 0.0710 +/- 0.0024 microA microM(-1); in contrast, the slope of the calibration line at uncoated gold electrodes in the presence of surfactant was 0.0268 microA microM(-1). These results indicate the excellent ability of a disorganized, porous monolayer for prevention of fouling of the electrode surface by the surfactants.     

Factors controlling stripping voltammetry of lead at polycrystalline boron doped diamond electrodes: new insights from high-resolution microscopy

We report wide-ranging studies to elucidate the factors and issues controlling stripping voltammetry of metal ions on solid electrodes using the well-known Pb/Pb(2+) couple on polycrystalline boron doped diamond (pBDD) as an exemplar system. Notably, high-resolution microscopy techniques have revealed new insights into the features observed in differential pulse anodic stripping voltammetry (DPV-ASV) which provide a deeper understanding of how best to utilize this technique. DPV-ASV was employed in an impinging wall-jet configuration to detect Pb(2+) in the nanomolar to micromolar concentration range at a pBDD macrodisk electrode. The deposition process was driven to produce a grain-independent homogeneous distribution of Pb nanoparticles (NPs) on the electrode surface; this resulted in the observation of narrow stripping peaks. Lower calibration gradients of current or charge versus concentration were found for the low concentrations, correlating with a lower than expected (from consideration of the simple convective-diffusive nature of the deposition process) amount of Pb deposited on the surface. This was attributed to the complex nature of nucleation and growth at solid surfaces in this concentration regime, complicating mass transport. Furthermore, a clear shift negative in the stripping peak potential with decreasing concentration was seen correlating with a change in the size of the deposited NP, suggesting an NP size-dependent redox potential for the Pb/Pb(2+) couple. At high concentrations a nonlinear response was observed, with less Pb detected than expected, in addition to the observation of a second stripping peak. Atomic force microscopy (AFM) and field emission scanning electron microscopy revealed the second peak to be due to a change in deposition morphology from isolated NPs to grain-independent heterogeneous structures comprising both thin films and NPs; the second peak is associated with stripping from the thin-film structures. AFM also revealed a substantial amount of Pb remaining on the surface after stripping at high concentration, explaining the nonlinear relationship between stripping peak current (or charge) and concentration. Finally, the use of an in situ cleaning procedure between each measurement was advocated to ensure a clean Pb-free surface (verified by AFM and X-ray photoelectron spectroscopy analysis) between each run. The studies herein highlight important and complex physicochemical processes involved in the electroanalysis of heavy metals at solid electrodes, such as pBDD, that need to be accounted for when using stripping voltammetry methods.     

Denaturation and renaturation of self-assembled yeast iso-1-cytochrome c on Au

We have made surface plasmon resonance (SPR) measurements of yeast iso-1-cytochrome c (Cyt c) on a gold surface. Angle-resolved SPR curves are recorded as a function of urea concentration before and after self-assembly of the Cyt c. Exposure to a urea solution causes denaturation of Cyt c, which shifts the minimum in the SPR curve to a larger angle and decreases the signal amplitude. The Gibbs free energy change for denaturation of the protein on Au is calculated from the change of the SPR signal amplitude with urea concentration. We find that (1) Cyt c can be reversibly denatured and renatured, depending on the urea concentration, and (2) the Gibbs free energy change for denaturation of Cyt c on Au surface in water, DeltaG degrees (water), is 1.5 kcal/mol, which is approximately 4 times less than that in bulk solution.     

Precise determination of the dielectric constant and thickness of a nanolayer by use of surface plasmon resonance sensing and multiexperiment linear data analysis

Surface plasmon resonance (SPR) sensing and an enhanced data analysis technique are used to obtain precise predictions of the dielectric constant and thickness of a nanolayer. In the proposed approach, a modified analytical method is used to obtain initial estimates of the dielectric constants and thicknesses of the metal film and a nanolayer on the sensing surface of a SPR sensor. A multiexperiment data analysis approach based on a two-solvent SPR method is then employed to improve the initial estimates by suppressing the noise in the measurement data. The proposed two-stage approach is employed to determine the dielectric constant and thickness of a molecular imprinting polymer nanolayer. It is found that the results are in good agreement with those obtained with an ellipsometer and a high-resolution scanning electron microscope.     

Grating-coupled transmission-type surface plasmon resonance sensors based on dielectric and metallic gratings

We investigated grating-coupled transmission-type surface plasmon resonance (SPR) for sensing applications. In the transmission-type SPR structure, propagating surface plasmons are outcoupled to radiation modes by dielectric and metallic gratings on a metal film. The results calculated in air and water suggest that the proposed structures present extremely linear sensing characteristics. In terms of a figure of merit, a metallic grating-based structure performs 5.4 and 3.7 times better than that of a dielectric grating in air and water, respectively.     

Fabrication and simulation studies on D-shaped optical fiber sensor via surface plasmon resonance

This paper describes simulation and experimental methods for designing a D-shaped surface plasmon resonance (SPR) fibre sensor. The sensor consists of two set-up approaches. Finite element method is used in simulation on the fibre sensor device. Two experimental methods for detecting relative intensity are used by varying the wavelength of the optical signal sources and the thickness of gold layer coated on the D-shaped fibre. In the first method, the sensor device works by detecting the relative intensity of two optical signal sources having different wavelengths. In the second set-up, the relative intensity between two D-shaped fibres coated with different thicknesses of gold is measured when a single signal source is launched at the input. The difference in intensities of the signal outputs is used to estimate the refractive index at the sensing region. A prototype SPR D-shaped fibre sensor has been fabricated and the experimental results show good agreement with simulation.     

Metallic nanoparticle-carbon nanotube composites for electrochemical determination of explosive nitroaromatic compounds

Metal nanoparticles (Pt, Au, or Cu) together with multiwalled and single-walled carbon nanotubes (MWCNT and SWCNT) solubilized in Nafion have been used to form nanocomposites for electrochemical detection of trinitrotoluene (TNT) and several other nitroaromatics. Electrochemical and surface characterization by cyclic voltammetry, AFM, TEM, SEM, and Raman spectroscopy confirmed the presence of metal nanoparticles on CNTs. Among various combinations tested, the most synergistic signal effect was observed for the nanocomposite modified glassy carbon electrode (GC) containing Cu nanoparticles and SWCNT solubilized in Nafion. This combination provided the best sensitivity for detecting TNT and other nitroaromatic compounds. Adsorptive stripping voltammetry for TNT resulted in a detection limit of 1 ppb, with linearity up to 3 orders of magnitude. Selectivity toward the number and position of the nitro groups in different nitroaromatics was very reproducible and distinct. Reproducibility of the TNT signal was within 7% (n = 8) from one electrode preparation to another, and the response signal was stable (+/-3.8% at 95% confidence interval) for 40 repeated analyses with 10 min of preconditioning. The Cu-SWCNT-modified GC electrode was demonstrated for analysis of TNT in tap water, river water, and contaminated soil.     

Magnetic bead-based chemiluminescent metal immunoassay with a colloidal gold label

A novel, sensitive chemiluminescent (CL) immunoassay has been developed by taking advantage of a magnetic separation/mixing process and the amplification feature of colloidal gold label. First, the sandwich-type complex is formed in this protocol by the primary antibody immobilized on the surface of magnetic beads, the antigen in the sample, and the second antibody labeled with colloidal gold. Second, a large number of Au3+ ions from each gold particle anchored on the surface of magnetic beads are released after oxidative gold metal dissolution and then quantitatively determined by a simple and sensitive Au3+-catalyzed luminol CL reaction. Third, this protocol is evaluated for a noncompetitive immunoassay of a human immunoglobulin G, and a concentration as low as 3.1 x 10(-12) M is determined, which is competitive with colloidal gold-based anodic stripping voltammetry (ASV), colorimetric ELISA, or immunoassays based on fluorescent europium chelate labels. The high performance of this protocol is related to the sensitive CL determination of Au3+ ion (detection limit of 2 x 10(-10) M), which is 25 times higher than that by ASV at a single-use carbon-based screen-printed electrode. From the analytical chemistry point of view, this protocol will be quite promising for numerous applications in immunoassay and DNA hybridization.     

In situ evaluation of density, viscosity, and thickness of adsorbed soft layers by combined surface acoustic wave and surface plasmon resonance

We show the theoretical and experimental combination of acoustic and optical methods for the in situ quantitative evaluation of the density, the viscosity, and the thickness of soft layers adsorbed on chemically tailored metal surfaces. For the highest sensitivity and an operation in liquids, a Love mode surface acoustic wave (SAW) sensor with a hydrophobized gold-coated sensing area is the acoustic method, while surface plasmon resonance (SPR) on the same gold surface as the optical method is monitored simultaneously in a single setup for the real-time and label-free measurement of the parameters of adsorbed soft layers, which means for layers with a predominant viscous behavior. A general mathematical modeling in equivalent viscoelastic transmission lines is presented to determine the correlation between experimental SAW signal shifts and the waveguide structure including the presence of the adsorbed layer and the supporting liquid from which it segregates. A methodology is presented to identify from SAW and SPR simulations the parameters representatives of the soft layer. During the absorption of a soft layer, thickness or viscosity changes are observed in the experimental ratio of the SAW signal attenuation to the SAW signal phase and are correlated with the theoretical model. As application example, the simulation method is applied to study the thermal behavior of physisorbed PNIPAAm, a polymer whose conformation is sensitive to temperature, under a cycling variation of temperature between 20 and 40 degrees C. Under the assumption of the bulk density and the bulk refractive index of PNIPAAm, thickness and viscosity of the film are obtained from simulations; the viscosity is correlated to the solvent content of the physisorbed layer.     

Characterization of ligand-functionalized microcantilevers for metal ion sensing

A sensor for metal cations is demonstrated using single and binary mixtures of different thiolated ligands as self-assembled monolayers (SAMs) functionalized on silicon microcantilevers (MCs) with gold nanostructured surfaces. Binding of charged metal ions to the active surface of a cantilever induces an apparent surface stress, thereby causing static bending of the MC that is detected in this work by a beam-bending technique. A MC response mechanism based on changes in surface charge is discussed. The monodentated ligands arranged as SAMs on the MC surface are not expected to fully satisfy the coordination sphere of the detected metals. This leads to lower binding constants than would be expected for chelating ligands, but reversible responses. The modest binding constants are compensated in terms of the magnitudes of responses by the inherent higher sensitivity of the nanostructured approach as opposed to more traditional smooth surface MCs. Response characteristics are optimized in terms of SAM formation time, concentration of ligand solution, and pH of working buffer solution. Limits of detection for the tested mono-, di-, and trivalent metal ions are in low to submicromolar range. The results indicated that shapes and magnitudes of response profiles are characteristics of the metal ions and type of SAM. The response factors for a given SAM with the tested metal ions, or for a given metal with the tested SAMs, varied by roughly 1 order of magnitude. While the observed selectivity is not large, it is anticipated that sufficient ionic recognition contrast is available for selective metal ion identification when differentially functionalized arrays of MCs (different ligands on different cantilevers in the array) are used in conjunction with pattern recognition techniques.     

An electrochemical metalloimmunoassay based on a colloidal gold label

A novel, sensitive electrochemical immunoassay has been developed using a colloidal gold label that, after oxidative gold metal dissolution in an acidic solution, was indirectly determined by anodic stripping voltammetry (ASV) at a single-use carbon-based screen-printed electrode (SPE). The use of disposable electrodes allows for simplified measurement in 35 microL of solution. The method was evaluated for a noncompetitive heterogeneous immunoassay of an immunoglobulin G (IgG) and a concentration as low as 3 x 10(-12) M was determined, which is competitive with colorimetric ELISA or with immunoassays based on fluorescent europium chelate labels. The high performance of the method is related to the sensitive ASV determination of gold(III) at a SPE (detection limit of 5 x 10(-9) M) and to the release of a large number of gold(III) ions from each gold particle anchored on the immunocomplex (e.g., 1.7 x 10(5) gold atoms are theoretically contained in a 18-nm spherical gold particle).     

Fiber-optic surface plasmon resonance sensors in the near-infrared spectral region

The sensitivity of fiber-optic surface plasmon resonance (SPR) sensors was improved by a factor of at least thirteen for aqueous solutions by modifying the tip geometry to allow interrogation of the surface plasmon (SP) band in the near-infrared (NIR) region. This was achieved by tuning the angle at the distal end of the SPR sensor to a dual taper of 71 degrees and 19 degrees . Using a low numerical aperture (NA) fiber-optic sensor, NA = 0.12, is necessary to obtain a functional SPR sensor working in the NIR region. Theoretical simulations using the Maxwell equations demonstrated that even higher enhancement is theoretically possible while maintaining a narrow spectral feature upon the excitation of the SP bands on gold surfaces. The manufacture of the SPR sensors yields good agreement between theoretical simulations and experimental observations. To investigate the properties of these fiber-optic SPR-NIR sensors, sucrose solutions ranging from 0 to 15 x 10(-3) in mole fraction were utilized. The increased sensitivity of the fiber-optic SPR sensors, when used to monitor biomarkers, would yield lower detection limits. The smaller sensing area, compared to planar or other fiber-optic SPR sensors, combined with an improvement of the sensitivity, would yield a dramatic reduction of the absolute amount detected by biosensors.     

Metal nanoparticle-based electrochemical stripping potentiometric detection of DNA hybridization

A new nanoparticle-based electrical detection of DNA hybridization, based on electrochemical stripping detection of the colloidal gold tag, is described. In this protocol, the hybridization of a target oligonucleotide to magnetic bead-linked oligonucleotide probes is followed by binding of the streptavidin-coated metal nanoparticles to the captured DNA, dissolution of the nanometer-sized gold tag, and potentiometric stripping measurements of the dissolved metal tag at single-use thick-film carbon electrodes. An advanced magnetic processing technique is used to isolate the DNA duplex and to provide low-volume mixing. The influence of relevant experimental variables, including the amounts of the gold nanoparticles and the magnetic beads, the duration of the hybridization and gold dissolution steps, and the parameters of the potentiometric stripping operation upon the hybridization signal, is examined and optimized. Transmission electron microscopy micrographs indicate that the hybridization event leads to the bridging of the gold nanoparticles to the magnetic beads. Further signal amplification, and lowering of the detection limits to the nanomolar and picomolar domains, are achieved by precipitating gold or silver, respectively, onto the colloidal gold label. The new electrochemical stripping metallogenomagnetic protocol couples the inherent signal amplification of stripping metal analysis with discrimination against nonhybridized DNA, the use of microliter sample volumes, and disposable transducers and, hence, offers great promise for decentralized genetic testing.     

Evaluation of multi-layered graphene surface plasmon resonance-based transmission type fiber optic sensor

Graphene is a zero band-gap semi-metal with remarkable electromagnetic and mechanical characteristics. This study is the first ever attempt to use graphene in the surface plasmon resonance (SPR) sensor as replacement material for gold/silver. Graphene, comprised of a single atomic layer of carbon, is a purely two-dimensional material and it is an ideal candidate for use as a biosensor because of its high surface-to-volume ratio. This sensor is based on the resonance occasion of the surface plasmon wave (SPW) according to the dielectric constants of each metal film and detected material in gas or aqueous phase. Graphene in the SPR sensor is expected to enlarge the range of analyte to bio-aerosols based on the superior electromagnetic properties of graphene. In this study, a SPR-based fiber optic sensor coated with multi-layered graphene is described. The multi-layered graphene film synthesized by chemical vapor deposition (CVD) on Ni substrate was transferred on the sensing region of an optical fiber. The graphene coated SPR sensor is used to analyze the interaction between structured DNA biotin and Streptavidin is analyzed. Transmitted light after passing through the sensing region is measured by a spectrometer and multimeter. As the light source, blue light which of 450 to 460 nm in wavelength was used. We observed the SPR phenomena in the sensor and show the contrary trends between bare fiber and graphene coated fiber. The fabricated graphene based fiber optic sensor shows excellent detection sensitivity of the interaction between structured DNA and Streptavidin.