Vinylene carbonate and vinylene trithiocarbonate as electrolyte additives for lithium ion battery

Vinylene carbonate (VC) and vinylene trithiocarbonate (VTC) are studied as electrolyte additives in two kinds of electrolytes: (1) propylene carbonate (PC) and diethyl carbonate (DEC) (1:2 by weight) 1 mol dm⁻³ LiPF₆; (2) ethylene carbonate (EC) and DEC (1:2 by weight) 1 mol dm⁻³ LiPF₆. Characterization is performed by cyclic voltammetry, impedance spectroscopy, scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS) and half cell tests. Cyclic life is better in either electrolyte with VC than either electrolyte with/without VTC. SEM shows VC and VTC both form well developed passivation films on the graphite anode, but the films with VTC are thicker than with VC. EIS shows the VTC films have significantly higher charge transfer resistance. The VTC film in PC fails to protect against exfoliation. XPS indicates VTC has different reaction pathways in PC relative to EC. In EC/DEC, VTC forms polymeric C-O-C-like components and sulfide species (C-S-S-C, S and C-S-C). In PC/DEC, VTC does not form polymeric species, instead forming a film mainly containing LiF and Li₂S. It appears that a thinner polymeric film is preferential. The specific data herein are of interest, and the general conclusions may help development of improved additives for enhanced Li-ion battery performance.     

Studies on the enhancement of solid electrolyte interphase formation on graphitized anodes in LiX-carbonate based electrolytes using Lewis acid additives for lithium-ion batteries

The new electrolyte systems utilizing one type of Lewis acids, the boron based anion receptors (BBARs) with LiF, Li₂O, or Li₂O₂ in carbonate solutions have been developed and reported by us. These systems open up a new approach in developing non-aqueous electrolytes with higher operating voltage and less moisture sensitivity for lithium-ion batteries. However, the formation of a stable solid electrolyte interphase (SEI) layer on the graphitized anodes is a serious problem needs to be solved for these new electrolyte systems, especially when propylene carbonate (PC) is used as a co-solvent. Using lithium bis(oxalato)borate (LiBOB) as an additives, the SEI layer formation on mesophase carbon microbeads (MCMB) anode is significantly enhanced in these new electrolytes containing boron-based anion receptors, such as tris(pentafluorophenyl) borane, and lithium salt such as LiF, or lithium oxides such as Li₂O or Li₂O₂ in PC and dimethyl carbonate (DMC) solvents. The cells using these electrolytes and MCMB anodes cycled very well and the PC co-intercalation was suppressed. Fourier transform infrared spectroscopy (FTIR) studies show that one of the electrochemical decomposition products of LiBOB, lithium carbonate (Li₂CO₃), plays a quite important role in the stablizing SEI layer formation.     

Electrochemical studies on epoxidised natural rubber-based gel polymer electrolytes for lithium–air cells

Gel polymer electrolyte films comprised of 50% epoxidised natural rubber polymer host, lithium triflate salt (LiCF₃SO₃), and ethylene carbonate (EC) or propylene carbonate (PC) plasticizer are prepared using the solution-casting technique. AC impedance studies show that the electrical conductivity of the electrolytes is dependent on both the salt and plasticizer concentrations. The highest room temperature conductivity of 4.92 × 10⁻⁴ S cm⁻¹ is achieved when 10 wt.% propylene carbonate is introduced into the system containing 1.0 g 50% epoxidised natural rubber polymer doped with 35 wt.% LiCF₃SO₃. Conductivity studies of these polymer electrolytes are carried out at various temperatures and are found to obey the Vogel–Tamman–Fulcher (VTF) rule. The highest conducting plasticized sample is used as a gelled electrolyte for lithium–air cells.     

A new lithium salt with dihydroxybenzene and lithium tetrafluoroborate for lithium battery electrolytes

A new unsymmetrical lithium salt containing F⁻, C₆H₄O₂²⁻ [dianion of 1,2-benzenediol], lithium difluoro(1,2-benzene-diolato(2-)-o,o′)borate (LDFBDB) is synthesized and characterized. Its thermal decomposition in nitrogen begins at 170 °C. The cyclic voltammetry study shows that the LDFBDB solution in propylene carbonate (PC) is stable up to 3.7 V versus Li⁺/Li. It is soluble in common organic solvents. The ionic dissociation properties of LDFBDB are examined by conductivity measurements in PC, PC+ ethyl methyl carbonate (EMC), PC + dimethyl ether (DME), PC + ethylene carbonate (EC) + EMC solutions. The conductivity values of the 0.564 mol dm⁻³ LDFBDB electrolyte in PC + DME solution is 3.90 mS cm⁻¹. All these properties of the new lithium salt including the thermal characteristics, electrochemical stabilities, solubilities, ionic dissociation properties are studied and compared with those of its derivatives, lithium difluoro(3-fluoro-1,2-benzene-diolato(2-)-o,o′)borate (FLDFBDB), lithium [3-fluoro-1,2-benzenediolato(2-)-o,o′ oxalato]borate (FLBDOB), and lithium bis(oxalate)borate (LBOB).     

A non-aqueous electrolyte for the operation of Li/air battery in ambient environment

In this work we report a non-aqueous electrolyte that supports long-term operation of the Li/air battery in dry ambient environments based on a non-hydrolytic LiSO₃CF₃ salt and a low volatility propylene carbonate (PC)/tris(2,2,2-trifluoroethyl) phosphate (TFP) solvent blend. By measuring and analyzing the viscosity of PC/TFP solvent blends, the ionic conductivity of electrolytes, and the discharge performance of Li/air cells as a function of the PC/TFP weight ratio, we determined the best composition of the electrolyte is 0.2 m (molality) LiSO₃CF₃ 7:3 wt. PC/TFP for Li/O₂ cells and 0.2 m LiSO₃CF₃ 3:2 wt. PC/TFP for Li/air cells. Discharge results indicate that Li/air cells with the optimized electrolyte are significantly superior in specific capacity and rate capability to those with baseline electrolytes. More interestingly, the improvement in discharge performance becomes more significant as the discharge current increases or the oxygen partial pressure decreases. These results agree neither with the viscosity of the solvent blends nor the ionic conductivity of the electrolytes. We consider that the most likely reason for the performance improvement is due to the increased dissolution kinetics and solubility of oxygen in TFP-containing electrolytes. In addition, the electrolyte has a 5.15 V electrochemical window, which is suitable for use in rechargeable Li/air batteries.     

Dimethyl methyl phosphate: A new nonflammable electrolyte solvent for lithium-ion batteries

A new fire retardant-dimethyl methyl phosphate (DMMP) was tested as a nonflammable electrolyte solvent for Li-ion batteries. It is found that in the addition of chloro-ethylene carbonate (Cl-EC) as an electrolyte additive, the electrochemical reduction of DMMP molecules can be completely suppressed and the graphite anode can be cycled very well with high initial columbic efficiency (∼84%) and excellent cycling stability in the DMMP electrolyte. The prismatic C/LiCoO₂ batteries using 1.0 mol L⁻¹ LiClO₄ + 10% Cl-EC + DMMP electrolyte exhibited almost the same charge and discharge performances as those using conventional carbonate electrolytes, suggesting a feasible use of this new electrolyte for constructing nonflammable Li⁺-ion batteries.     

Electrochemical cell studies based on non-aqueous magnesium electrolyte for electric double layer capacitor applications

Performances of electric double layer capacitors (EDLCs) based on an activated carbon electrode with acetonitrile (ACN), propylene carbonate (PC), or a ternary electrolyte, i.e., PC:ethylene carbonate (EC):diethyl carbonate (DEC), at 1 mol dm⁻³ of magnesium perchlorate [Mg(ClO₄)₂] salt have been investigated. The electrochemical responses were studied by impedance spectroscopy, cyclic voltammetry, and galvanostatic charge-discharge experiments at 25 °C in a three-electrode configuration. For a comparative evaluation, lithium perchlorate (LiClO₄) salt-based systems were also evaluated. All the observed results showed typical EDLC characteristics within the potential range between 0 and 1 V vs. an Ag/Ag⁺ reference electrode. The Mg-based systems exhibited similar or rather better performances than the corresponding Li-based electrolytes; in particular, the rate capability of Mg-based ACN and PC electrolytes was much better than the corresponding Li-based electrolytes, indicating the high accessibility and utility of activated carbon pores by solvated Mg ions.     

A novel flame retardant and film-forming electrolyte additive for lithium ion batteries

Allyl tris(2,2,2-trifluoroethyl) carbonate (ATFEC) was synthesized as a bi-functional additive of flame retardant and film former in electrolytes for lithium ion batteries (LIBs). The flame retardancy of the additive was characterized with differential scanning calorimetry (DSC) and self-extinguishing time (SET). It is shown that adding 1 vol.% ATFEC in 1 M LiPF₆/propylene carbonate (PC) can effectively enhance the thermal stability of the electrolyte and suppress the co-intercalation of PC into the graphitic anode. Further evaluation indicates that the additive hardly affect the conductivity of electrolyte. These support the feasibility of using ATFEC as an additive on formulating an electrolyte with multiple functions such as film-forming enhancement, high thermal stability and high ionic conductivity.     

A high performance composite ionic conducting electrolyte for intermediate temperature fuel cell and evidence for ternary ionic conduction

The performance of a composite electrolyte composed of a samarium doped ceria (SDC) and a ternary eutectic carbonate melt phase was examined. The formation temperature of a continuous carbonate melt phase is crucial to the high conductivity of this material. The electrolyte contains 30 and 50 wt% carbonate exhibited a sharp increase of conductivity at a temperature close to the melting point of the eutectic carbonate, ca 400 °C, which is more than 100 °C lower than those electrolytes using binary carbonate. At around 650 °C, and with CO₂/O₂ used as the cathode gas, the fuel cell gave a power output 720 mW cm⁻² at a current density 1300 mA cm⁻². Water was measured in both the anode and cathode outlet gases and CO₂ was detected in the anode outlet gas. When discharged at 800 mA cm⁻², a stable discharge plateau was obtained. The CO₂ in the cathode gas enhances the power output and the stability of the single cell. Based on these experimental facts, a ternary ionic conducting scheme is proposed and discussed.     

Electrochromic devices employing methacrylate-based polymer electrolytes

Poly(ethyl methacrylate) (PEMA)- and poly(2-ethoxyethyl methacrylate) (PEOEMA)-based polymer gel electrolytes with entrapped solutions of lithium perchlorate in propylene carbonate (PC) were prepared by direct, UV-initiated polymerization. The electrolytes were studied using electrochemical methods and they exhibit good ionic conductivity (up to 0.7 mS cm⁻¹ at 20 °C) as well as electrochemical stability up to 2.5 V vs. Cd/Cd²⁺ (5.1 V vs. Li/Li⁺) on gold electrode. The electrolytes have thermal stability up to 125 °C. The electrolytes were successfully tested as ionic conductors in the electrochromic device FTO/WO₃/Li⁺-electrolyte/V₂O₅/FTO using coupled optoelectrochemical methods to discuss the relationship between the electrolyte composition and parameters such as change of transmittance, response time and stability. The transmittance change Δτ was found to be 30-45% at 634 nm.     

Polymer electrolytes containing guanidinium-based polymeric ionic liquids for rechargeable lithium batteries

The electrochemical properties of solvent-free, quaternary polymer electrolytes based on a novel polymeric ionic liquid (PIL) as polymer host and incorporating 1g13TFSI ionic liquid, LiTFSI salt and nano-scale silica are reported. The PIL-LiTFSI-1g13TFSI-SiO₂ electrolyte membranes are found to be chemically stable even at 80 °C in contact with lithium anode and thermally stable up to 320 °C. Particularly, the quaternary polymer electrolytes exhibit high lithium ion conductivity at high temperature, wide electrochemical stability window, time-stable interfacial resistance values and good lithium stripping/plating performance. Batteries assembled with the quaternary polymer electrolyte at 80 °C are capable to deliver 140 mAh g⁻¹ at 0.1C rates with very good capacity retention.     

Functional interface of polymer modified graphite anode

Graphite electrodes were modified by polyacrylic acid (PAA), polymethacrylic acid (PMA), and polyvinyl alcohol (PVA). Their electrochemical properties were examined in 1 mol dm⁻³ LiClO₄ ethylene carbonate:dimethyl carbonate (EC:DMC) and propylene carbonate (PC) solutions as an anode of lithium ion batteries. Generally, lithium ions hardly intercalate into graphite in the PC electrolyte due to a decomposition of the PC electrolyte at ca. 0.8 V vs. Li/Li⁺, and it results in the exfoliation of the graphene layers. However, the modified graphite electrodes with PAA, PMA, and PVA demonstrated the stable charge–discharge performance due to the reversible lithium intercalation not only in the EC:DMC but also in the PC electrolytes since the electrolyte decomposition and co-intercalation of solvent were successfully suppressed by the polymer modification. It is thought that these improvements were attributed to the interfacial function of the polymer layer on the graphite which interacted with the solvated lithium ions at the electrode interface.     

Ion-conducting lithium bis(oxalato)borate-based polymer electrolytes

Poly(2-ethoxyethyl methacrylate) polymer gel electrolytes containing immobilised lithium bis(oxalato)borate in aprotic carbonates: propylene carbonate (PC), propylene carbonate–ethylene carbonate (PC–EC 50:50 vol.%) and diethyl carbonate–ethylene carbonate (DEC–EC 50:50 vol.%) were prepared by a direct radical polymerisation. The electrolyte composition was optimised to achieve suitable ionic conductivity 0.5 and 2.4 mS cm⁻¹ at 25 and 70 °C respectively along with good mechanical properties. The electrochemical stability up to 5.1 V vs. Li/Li⁺ was determined on gold electrode by voltammetrical measurements. The polymer electrolytes with high-boiling solvents (PC and PC/EC) showed higher thermal stability (up to 110–120 °C) compared to the liquid electrolytes. The proposed area of application is in the lithium-ion batteries with cathodes operating at elevated temperatures of 70 °C, where higher electrochemical stability of the polymer electrolytes is employed.     

Ternary polymer electrolytes containing pyrrolidinium-based polymeric ionic liquids for lithium batteries

The electrochemical properties of solvent-free, ternary polymer electrolytes based on a novel poly(diallyldimethylammonium) bis(trifluoromethanesulfonyl)imide polymeric ionic liquid (PIL) as polymer host and incorporating PYR₁₄TFSI ionic liquid and LiTFSI salt are reported. The PIL-LiTFSI-PYR₁₄TFSI electrolyte membranes were found to be chemically stable even after prolonged storage times in contact with lithium anode and thermally stable up to 300 °C. Particularly, the PIL-based electrolytes exhibited acceptable room temperature conductivity with wide electrochemical stability window, time-stable interfacial resistance values and good lithium stripping/plating performance. Preliminary battery tests have shown that Li/LiFePO₄ solid-state cells are capable to deliver above 140 mAh g⁻¹ at 40 °C with very good capacity retention up to medium rates.     

Electrical and electrochemical studies of poly(vinylidene fluoride)-clay nanocomposite gel polymer electrolytes for Li-ion batteries

A study is conducted on the electrical and electrochemical properties of nanocomposite polymer electrolytes based on intercalation of poly(vinylidene fluoride) (PVdF) polymer into the galleries of organically modified montmorillonite (MMT) clay. A solution intercalation technique is employed for nanocomposite formation with varying clay loading from 0 to 4 wt.%. X-ray diffraction results show the β phase formation of PVdF on intercalation. Transmission electron microscopy reveals the formation of partially exfoliated nanocomposites. The nanocomposites are soaked with 1 M LiClO₄ in a 1:1 (v/v) solution of propylene carbonate (PC) and diethyl carbonate (DEC) to obtain the required gel electrolytes. The structural conformation of the nanocomposite electrolytes is examined by Fourier transform infrared spectroscopy analysis. Examination with a.c. impedance spectroscopy reveals that the ionic conductivity of the nanocomposite gel polymer electrolytes increases with increase in clay loading and attains a maximum value of 2.3 × 10⁻³ S cm⁻¹ for a 4 wt.% clay loading at room temperature. The same composition exhibits enhancement in the electrochemical and interfacial properties as compared with that of a clay-free electrolyte system.     

Improved electrolytes for Li-ion batteries: Mixtures of ionic liquid and organic electrolyte with enhanced safety and electrochemical performance

Physical and electrochemical characteristics of Li-ion battery systems based on LiFePO₄ cathodes and graphite anodes with mixture electrolytes were investigated. The mixed electrolytes are based on an ionic liquid (IL), and organic solvents used in commercial batteries. We investigated a range of compositions to determine an optimum conductivity and non-flammability of the mixed electrolyte. This led us to examine mixtures of ILs with the organic electrolyte usually employed in commercial Li-ion batteries, i.e., ethylene carbonate (EC) and diethylene carbonate (DEC). The IL electrolyte consisted of (trifluoromethyl sulfonylimide) (TFSI) as anion and 1-ethyl-3-methyleimidazolium (EMI) as the cation. The physical and electrochemical properties of some of these mixtures showed an improvement characteristics compared to the constituents alone. The safety was improved with electrolyte mixtures; when IL content in the mixture is ≥40%, no flammability is observed. A stable SEI layer was obtained on the MCMB graphite anode in these mixed electrolytes, which is not obtained with IL containing the TFSI-anion. The high-rate capability of LiFePO₄ is similar in the organic electrolyte and the mixture with a composition of 1:1. The interface resistance of the LiFePO₄ cathode is stabilized when the IL is added to the electrolyte. A reversible capacity of 155 mAh g⁻¹ at C/12 is obtained with cells having at least some organic electrolyte compared to only 124 mAh g⁻¹ with pure IL. With increasing discharge rate, the capacity is maintained close to that in the organic solvent up to 2 C rate. At higher rates, the results with mixture electrolytes start to deviate from the pure organic electrolyte cell. The evaluation of the Li-ion cells; LiFePO₄//Li₄Ti₅O₁₂ with organic and, 40% mixture electrolytes showed good 1st CE at 98.7 and 93.0%, respectively. The power performance of both cell configurations is comparable up to 2 C rate. This study indicates that safety and electrochemical performance of the Li-ion battery can be improved by using mixed IL and organic solvents.     

Lithium oxalyldifluoroborate/carbonate electrolytes for LiFePO4/artificial graphite lithium-ion cells

The electrolytes based on lithium oxalyldifluoroborate (LiODFB) and carbonates have been systematically investigated for LiFePO₄/artificial graphite (AG) cells, by ionic conductivity test and various electrochemical tests, such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and charge-discharge test. The conductivity of nine electrolytes as a function of solvent composition and LiODFB salt concentration has been studied. The coulombic efficiency of LiFePO₄/Li and AG/Li half cells with these electrolytes have also been compared. The results show that 1 M LiODFB EC/PC/DMC (1:1:3, v/v) electrolyte has a relatively higher conductivity (8.25 mS cm⁻¹) at 25 °C, with high coulombic efficiency, good kinetics characteristics and low interface resistance. With 1 M LiODFB EC/PC/DMC (1:1:3, v/v) electrolyte, LiFePO₄/AG cells exhibit excellent capacity retention ∼92% and ∼88% after 100 cycles at 25 °C and at elevated temperatures up to 65 °C, respectively; The LiFePO₄/AG cells also have good rate capability, the discharge capacity is 324.8 mAh at 4 C, which is about 89% of the discharge capacity at 0.5 C. However, at −10 °C, the capacity is relatively lower. Compared with 1 M LiPF₆ EC/PC/DMC (1:1:3, v/v), LiFePO₄/AG cells with 1 M LiODFB EC/PC/DMC (1:1:3, v/v) exhibited better capacity utilization at both room temperature and 65 °C. The capacity retention of the cells with LiODFB-based electrolyte was much higher than that of LiPF₆-based electrolyte at 65 °C, while the capacity retention and the rate capacity of the cells is closed to that of LiPF₆-based electrolyte at 25 °C. In summary, 1 M LiODFB EC/PC/DMC (1:1:3, v/v) is a promising electrolyte for LiFePO₄/AG cells.     

Novel polymer electrolytes based on thermoplastic polyurethane and ionic liquid/lithium bis(trifluoromethanesulfonyl)imide/propylene carbonate salt system

Polymer electrolytes were prepared from thermoplastic polyurethane with addition of mixture of ionic liquid N-ethyl(methylether)-N-methylpyrrolidinium trifluoromethanesulfonimmide (PYRA_12O1TFSI), lithium bis(trifluoromethanesulfoneimide) salt and propylene carbonate. The electrolytes characterization was performed by thermogravimetric analysis, differential scanning calorimetry and scanning electron microscopy. The electrical properties were investigated in detail by impedance spectroscopy with the aid of equivalent circuit fitting of the impedance spectra. A model describing temperature evolution of ionic conductivity and the properties of electrolyte/blocking electrode interface was developed. The electrochemical stability of the electrolytes was studied by linear voltammetry. Our results indicate that the studied electrolytes have good self-standing characteristics, and also a sufficient level of thermal stability and a fairly good electrochemical window. The ionic conductivity increases with increasing amount of mixture, and the character of temperature dependence of conductivity indicates decoupling of ion transport from polymer matrix. For studied system, the highest value of ionic conductivity measured at room temperature was 10⁻⁴ S cm⁻¹.     

A new lithium salt with 3-fluoro-1,2-benzenediolato and lithium tetrafluoroborate for lithium battery electrolytes

A new unsymmetrical lithium salt containing F⁻, C₆H₃O₂F²⁻ [dianion of 3-fluoro-1,2-benzenediol], lithium difluoro(3-fluoro-1,2-benzene-diolato(2-)-o,o′)borate (FLDFBDB) is synthesized and characterized. The thermal characteristics of it, and its derivatives, lithium bis[3-fluoro-1, 2-benzenediolato(2-)-o,o]borate (FLBBB), and lithium fluoroborate (LiBF₄) are examined by thermogravimetric analysis (TG). The thermal decomposition in air begins at 256 °C, 185 °C, and 162 °C for FLBBB, FLDFBDB and LiBF₄, respectively. The order of the stability toward the oxidation of these organoborates is LiBF₄ > FLDFBDB > FLBBB. The cyclic voltammetry study shows that the FLDFBDB solution in propylene carbonate (PC) is stable up to 3.9 V vs. Li⁺/Li. It is soluble in common organic solvents. Ionic dissociation properties of FLDFBDB and its derivatives are examined by conductivity measurements in PC, PC + ethyl methyl carbonate (EMC), PC + dimethyl ether (DME), PC + ethylene carbonate (EC) + DME, PC + EC + EMC solutions. The conductivity values of the 0.10 mol dm⁻³ FLDFBDB electrolyte in these solutions are higher than those of FLBBB, but lower than those of LiBF₄ electrolytes.     

A novel high-performance gel polymer electrolyte membrane basing on electrospinning technique for lithium rechargeable batteries

Nonwoven films of composites of thermoplastic polyurethane (TPU) with different proportion of poly(vinylidene fluoride) (PVdF) (80, 50 and 20%, w/w) are prepared by electrospinning 9 wt% polymer solution at room temperature. Then the gel polymer electrolytes (GPEs) are prepared by soaking the electrospun TPU-PVdF blending membranes in 1 M LiClO₄/ethylene carbonate (EC)/propylene carbonate (PC) for 1 h. The gel polymer electrolyte (GPE) shows a maximum ionic conductivity of 3.2 × 10⁻³ S cm⁻¹ at room temperature and electrochemical stability up to 5.0 V versus Li⁺/Li for the 50:50 blend ratio of TPU:PVdF system. At the first cycle, it shows a first charge-discharge capacity of 168.9 mAh g⁻¹ when the gel polymer electrolyte (GPE) is evaluated in a Li/PE/lithium iron phosphate (LiFePO₄) cell at 0.1 C-rate at 25 °C. TPU-PVdF (50:50, w/w) based gel polymer electrolyte is observed much more suitable than the composite films with other ratios for high-performance lithium rechargeable batteries.