A facile approach to prepare self-cross-linkable sulfonated poly(ether ether ketone) membranes for direct methanol fuel cells

Sulfonated poly(ether ether ketone) containing hydroxyl groups (SPEEK-OH) has been prepared for use as a proton exchange membrane (PEM) by reducing the carbonyl groups on the main chain of the polymers. With the goal of reducing water uptake and methanol permeability, a facile thermal-cross-linking process is used to obtain the cross-linked membranes. The properties of the cross-linked membranes with different cross-linked density are measured and compared with the pristine membrane. Notably, SPEEK-4 with the highest cross-linked density shows a water uptake of 39% and a methanol permeability of 2.52 × 10⁻⁷ cm² s⁻¹, which are much lower than those of the pristine membrane (63.2% and 5.37 × 10⁻⁷ cm² s⁻¹, respectively). These results indicate that this simple approach is very effective to prepare cross-linked proton exchange membranes for reducing water uptake and methanol permeability.     

Fabrication and characterization of poly(vinyl alcohol)/montmorillonite/poly(styrene sulfonic acid) proton-conducting composite membranes for direct methanol fuel cells

A high performance poly(vinyl alcohol)/montmorillonite/poly(styrene sulfonic acid) (PVA/MMT/PSSA) proton-conducting composite membrane was fabricated by a solution casting method. The characteristic properties of these blend composite membranes were investigated by using thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, methanol permeability measurement, and the AC impedance method. The ionic conductivities for the composite membranes are in the order of 10⁻³ S cm⁻¹ at ambient temperature. There are two proton sources used on this novel composite membrane: the modified MMT fillers and PSSA polymer, both materials all contain the -SO₃H group. Therefore, the ionic conductivity was greatly enhanced. The methanol permeabilities of PVA/MMT/PSSA composite membranes is of the order of 10⁻⁷ cm² s⁻¹. It is due to the excellent methanol barrier properties of the PVA polymer. The peak power densities of the air-breathing direct methanol fuel cells (DMFCs) with 1M, 2M, 4M CH₃OH fuels were 14.22, 20.00, and 13.09 mW cm⁻², respectively, at ambient conditions. The direct methanol fuel cell with this composite polymer membrane exhibited good electrochemical performance. The proposed PVA/MMT/PSSA composite membrane is therefore a potential candidate for future applications in DMFC.     

Cross-linked membranes based on sulfonated poly (ether ether ketone) (SPEEK)/Nafion for direct methanol fuel cells (DMFCs)

A series of cross-linked membranes based on SPEEK/Nafion have been prepared to improve methanol resistance and dimension stability of SPEEK membrane for the usage in the direct methanol fuel cells (DMFCs). Sulfonated diamine monomer is synthesized and used as cross-linker to improve the dispersion of Nafion in the composite membranes and decrease the negative effect of cross-linking on proton conductivity of membranes. FT-IR analysis shows that the cross-linking reaction is performed successfully. The effects of different contents of Nafion on the properties of cross-linked membranes are investigated in detail. All the cross-linked membranes show lower methanol permeability and better dimensional stability compared with the pristine SPEEK membrane. SPEEK-N30 with the 30 wt % Nafion shows a methanol permeability of 0.73 × 10⁻⁶ cm² s⁻¹ and a water uptake of 24.4% at 25 °C, which are lower than those of the pristine membrane. Meanwhile, the proton conductivity of SPEEK-N30 still remains at 0.041 S cm⁻¹ at 25 °C, which is comparable to that of the pristine SPEEK membrane. All the results indicate that these cross-linked membranes based on SPEEK/Nafion show good prospect for the use as proton exchange membranes.     

Cross-linked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride)-based semi-interpenetrating network as proton-conducting membranes for direct methanol fuel cells

A series of semi-interpenetrating network (SIPN) membranes was synthesized by using poly(vinyl alcohol) (PVA) with sulfosuccinic acid (SSA) as a cross-linking agent and poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) as a proton source for direct methanol fuel cell (DMFC) application. A bridge of SSA between PVA molecules not only reinforced the network but also provided extra proton-conducting paths. PSSA-MA chains trapped in the network were the major proton conduction path of the membrane. The SIPN membranes with 80% PSSA-MA (SIPN-80) exhibited a higher proton conductivity value of 2.59 × 10⁻² S cm⁻¹ and very low methanol permeability (4.1 × 10⁻⁷ cm² s⁻¹). More specifically, the SIPN membranes exhibited very high selectivity (proton conductivity/methanol permeability). Membrane characteristics such as water uptake, proton conductivity and methanol permeability were evaluated to determine the effect of PVA molecular weights. The SIPN membranes with higher PVA molecular weight were also evaluated using methanol and oxygen gas in a single cell fuel cell at various temperatures. Power density value of over 100 mW cm⁻² was obtained for SIPN membrane-based membrane electrode assembly at 80 °C and using commercial binary alloy anode catalysts and 2 M methanol.     

Preparation and properties of crosslinked sulphonated poly(arylene ether sulphone) blend s for direct methanol fuel cell applications

HMS-based sulphonated poly(arylene ether sulphone) (HMSSH) is synthesised using 4,4′-dihydroxy-α-methylstilbene (HMS) monomer to introduce an interesting stilbene core as crosslinkable group. Crosslinked blend membranes are obtained by blending the BPA-based sulphonated poly(arylene ether sulphone) (BPASH) with crosslinkable HMS-based sulphonated poly(arylene ether sulphone) by UV irradiation of the blend membrane. Compared to the native BPASH with crosslinked BPASH/HMSSH blend membranes, the crosslinked blend membranes greatly reduce the water uptake and methanol permeability with only a slight reduction in proton conductivity. The crosslinked blend membrane, which has a 6% HMSSH content, has a water uptake of 59%, methanol permeability of 0.75 × 10⁻⁶ cm² s⁻¹, and proton conductivity of 0.08 S cm⁻¹. A membrane-electrode assembly is used to investigate single-cell performance and durability test for DMFC applications. Both the power density and open circuit voltage are higher than those of Nafion^® 117. A maximum power density of 32 mW cm⁻² at 0.2 V is obtained at 80 °C, which is higher than that of Nafion^® 117 (25 mW cm⁻²).     

Nafion-assisted cross-linking of sulfonated poly(arylene ether ketone) bearing carboxylic acid groups and their composite membranes for fuel cells

In this study, a new type of cross-linked composite membrane is prepared and considered for its potential applications in direct methanol fuel cell. Nafion and sulfonated poly(arylene ether ketone) bearing carboxylic acid groups (SPAEK-C) are blended and subsequently cross-linked by a Friedel-Craft reaction using the carboxylic acid groups in the SPAEK-C to achieve lower methanol permeability. The perfluoroalkyl sulfonic acid groups of Nafion act as a benign solid catalyst, which assist the cross-linking of SPAEK-C. The physical and chemical characterizations of the cross-linked composite membranes are performed by varying the contents of SPAEK-C. The c-Nafion-15% membrane exhibits appropriate water uptake (10.49-25.22%), low methanol permeability (2.57 × 10⁻⁷ cm² s⁻¹), and high proton conductivity (0.179 S cm⁻¹ at 80 °C). DSC and FTIR analyze suggest the cross-linking reaction. These results show that the self-cross-linking of SPAEK-C in the Nafion membrane can effectively reduce methanol permeability while maintaining high proton conductivity.     

Novel branched sulfonated poly(ether ether ketone)s membranes for direct methanol fuel cells

In this article, novel branched sulfonated poly(ether ether ketone)s (Br-SPEEK) containing various amounts of 1,3,5-tris(4-fluorobenzoyl)benzene as the branching agent have been successfully prepared. Compared with the traditional linear polymer membranes, the membranes prepared by Br-SPEEK showed improved mechanical strength, excellent dimensional stability and superior oxidative stability with similar proton conductivity. Notably, the Br-SPEEK-10 membrane began to break after 267 min in Fenton's reagent at 80 °C, which was 4 times longer than that of the L-SPEEK. Although the proton conductivity decreased with the addition of the branching agent, satisfying methanol permeability value was observed (down to 6.3 × 10⁻⁷ cm² s⁻¹), which was much lower than Nafion 117 (15.5 × 10⁻⁷ cm² s⁻¹). All the results indicated that the novel branched sulfonated poly(ether ether ketone)s membrane was potential candidate as proton conductive membranes for application in fuel cells.     

Cross-linked poly(arylene ether ketone) electrolyte membranes with enhanced proton conduction for fuel cells

A new class of covalently cross-linkable poly(arylene ether ketone)s (cPAEKs) with sulfonic acid groups on both the backbone and pedant positions were synthesized. 3-Amino-1,5-napthalene disulfonic acid salt was chosen as a strong sulfonating agent for the preparation of csPAEK membranes with high sulfonation degree (SD). The major advantage of synthesized membranes is their exceptionally high-proton conductivities but still maintaining low methanol permeability and water uptake. All csPAEK membranes exhibited higher proton conductivity than Nafion^®117 over the temperature range of 40–90 °C. For example, among these membranes, csPAEK0 with the lowest SD shows a proton conductivities of 0.071 S cm⁻¹ at 40 °C and 0.118 S cm⁻¹ at 90 °C, which are higher than those of Nafion^®117 (0.057 S cm⁻¹ at 40 °C and 0.108 S cm⁻¹ at 90 °C). More interestingly, csPAEK0 appears to have a low water uptake, with values of only 22% at 40 °C and 27% at 90 °C, indicating high dimensional stability in hot water. Moreover, in many cases, csPAEK membranes with 15% cross-linking degree (CD) exhibited low methanol permeability, good thermal stability, and showed very high strain at break. The superior proton conduction, methanol permeation, and water uptake properties of the prepared membranes are of significant interest for both PEMFCs and DMFCs applications.     

Sulfonated mesoporous benzene-silica-embedded sulfonated poly(ether ether ketone) membranes for enhanced proton conduction and anti-dehydration

In polymer electrolyte fuel cell operation, a decrease in the proton conductivity of the membrane at reduced humidity is a main cause for poor cell performance at high temperature. To alleviate the dehydration of the membrane at high temperature, sulfonated mesoporous benzene-silica (sMBS) particles are embedded in sulfonated poly(ether ether ketone) (sPEEK) membranes. As the sMBS itself is highly sulfonated on both organic and inorganic moieties, the proton conductivity of composite membranes is much higher than that of the pristine sPEEK membrane, and it reaches that of Nafion 117 at a high relative humidity (RH) of 90%. The dehydration rate of the membrane is reduced significantly by the capillary condensation effect of sMBS particles with the nanometer-scale 2-D hexagonal cylindrical pores, and the proton conductivity of the composite membranes, 0.234 × 10⁻¹ S cm⁻¹, is much higher than that of pristine sPEEK membrane, 0.59 × 10⁻³ S cm⁻¹, at a relatively low humidity of 40% RH. This maintenance of high conductivity at low humidity is attributed to the high water-holding capacity of the sMBS proton conductors. The sMBS-embedded sPEEK composite membranes show a much lower methanol permeability of 2–5 × 10⁻⁷ cm² s⁻¹ compared to that of Nafion 117, which is 1.6 × 10⁻⁶ cm² s⁻¹ at room temperature.     

Quinoxaline-based crosslinked membranes of sulfonated poly(arylene ether sulfone)s for fuel cell applications

A series of crosslinkable sulfonated poly(arylene ether sulfone)s (SPAESs) were synthesized by copolymerization of 4,4′-biphenol with 2,6-difluorobenzil and 3,3′-disulfonated-4,4′-difluorodiphenyl sulfone disodium salt. Quinoxaline-based crosslinked SPAESs were prepared via the cyclocondensation reaction of benzil moieties in polymer chain with 3,3′-diaminobenzidine to form quinoxaline groups acting as covalent and acid-base ionic crosslinking. The uncrosslinked and crosslinked SPAES membranes showed high mechanical properties and the isotropic membrane swelling, while the later became insoluble in tested polar aprotic solvents. The crosslinking significantly improved the membrane performance, i.e., the crosslinked membranes had the lower membrane dimensional change, lower methanol permeability and higher oxidative stability than the corresponding precursor membranes, with keeping the reasonably high proton conductivity. The crosslinked membrane (CS1-2) with measured ion exchange capacity of 1.53 mequiv. g⁻¹ showed a reasonably high proton conductivity of 107 mS/cm with water uptake of 48 wt.% at 80 °C, and exhibited a low methanol permeability of 2.3 × 10⁻⁷ cm² s⁻¹ for 32 wt.% methanol solution at 25 °C. The crosslinked SPAES membranes have potential for PEFC and DMFCs.     

Sulfonated titania submicrospheres-doped sulfonated poly(ether ether ketone) hybrid membranes with enhanced proton conductivity and reduced methanol permeability

Sulfonated titania submicrospheres (TiO₂-SO₃H) prepared through a facile chelation method are incorporated into sulfonated poly(ether ether ketone) (SPEEK) to fabricate organic-inorganic hybrid membranes with enhanced proton conductivity and reduced methanol permeability for potential use in direct methanol fuel cells (DMFCs). The pristine titania submicrospheres (TiO₂) with a uniform particle size are synthesized through a modified sol-gel method and sulfonated using 4,5-dihydroxy-1,3-benzenedisulfonic acid disodium salt as the sulfonation reagent. The sulfonation process is confirmed by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectra (XPS). The hybrid membranes are systematically characterized in terms of thermal property, mechanical property, ionic exchange capacity (IEC), swelling behavior, and microstructural features. The methanol barrier property and the proton conductivity of the SPEEK/TiO₂-SO₃H hybrid membranes are evaluated. The presence of the fillers reduces methanol crossover through the membrane. Compared with the unsulfonated TiO₂-doped membranes, the TiO₂-SO₃H-doped ones exhibit higher proton conductivity due to the additional sulfonic acid groups on the surface of TiO₂. The hybrid membrane doped with 15 wt.% TiO₂-SO₃H submicrospheres exhibits an acceptable proton conductivity of 0.053 S cm⁻¹ and a reduced methanol permeability of 4.19 × 10⁻⁷ cm² s⁻¹.     

Crosslinked sulfonated poly(arylene ether ketone) membranes bearing quinoxaline and acid-base complex cross-linkages for fuel cell applications

A series of crosslinkable sulfonated poly(arylene ether ketone)s (SPAEKs) were synthesized by copolymerization of 4,4′-biphenol with 2,6-difluorobenzil and 5,5′-carbonyl-bis(2-fluorobenzene-sulfonate). A facile crosslinking method was successfully developed, based on the cyclocondensation reaction of benzil moieties in polymer chain with 3,3′-diaminobenzidine to form quinoxaline groups acting as covalent and acid-base ionic crosslinking. The uncrosslinked and crosslinked SPAEK membranes showed high mechanical properties and the isotropic membrane swelling, while the later became insoluble in tested polar aprotic solvents. The crosslinking significantly improved the membrane performance, i.e., the crosslinked membranes had the lower membrane dimensional change, lower methanol permeability and higher oxidative stability than the corresponding precursor membranes, with keeping the reasonably high proton conductivity. The crosslinked membrane (C-B4) with an ion exchange capacity of 2.02 mequiv. g⁻¹ showed a reasonably high proton conductivity of 111 mS cm⁻¹ with a low water uptake of 42 wt% at 80 °C. C-B4 exhibited a low methanol permeability of 0.55 × 10⁻⁶ cm² s⁻¹ for 32 wt% methanol solution at 25 °C. The crosslinked SPAEK membranes have potential for PEFC and DMFC applications.     

Transport properties and fuel cell performance of sulfonated poly(imide) proton exchange membranes

Selective sulfonated poly(imide)s with high proton conductivity and low methanol permeability were tested for their performance as proton exchange membranes in direct methanol fuel cells (DMFC). The proton to methanol transport selectivity of the poly(imide) membranes correlated well with the self-diffusion coefficients of water in the membranes as determined by pulsed-field gradient nuclear magnetic resonance. The poly(imide) membranes showed improved fuel cell device performance, however high interfacial resistance between the membranes and electrodes decreased the membrane electrode assembly (MEA) conductivity to methanol crossover selectivity, likely due to the use of NAFION^®-based electrodes. The maximum power densities of SPI-50, SPI-75, and NR-212 based MEAs were 75, 72, and 67 mW cm⁻², respectively, with a methanol feed concentration of 2 M at a cell temperature of 60 °C.     

Novel cross-linked sulfonated poly (arylene ether ketone) membranes for direct methanol fuel cell

To prepare a cross-linked proton exchange membrane with low methanol permeability and high proton conductivity, poly (vinyl alcohol) is first blended with sulfonated poly (arylene ether ketone) bearing carboxylic acid groups (SPAEK-C) and then heated to induce a cross-linking reaction between the carboxyl groups in SPAEK-C and the hydroxyl groups in PVA. Fourier transform infrared spectroscopy is used to characterize and confirm the structure of SPAEK-C and the cross-linked membranes. The proton conductivity of the cross-linked membrane with 15% PVA in weight reaches up to 0.18 S cm⁻¹ at 80 °C (100% relative humidity), which is higher than that of Nafion membrane, while the methanol permeability is nearly five times lower than Nafion. The ion-exchange capacity, water uptake and thermal stability are investigated to confirm their applicability in fuel cells.     

Organic-inorganic crosslinked and hybrid membranes derived from sulfonated poly(arylene ether sulfone)/silica via sol-gel process

A series of covalently crosslinkable organic-inorganic hybrid membranes have been prepared from sulfonated poly(arylene ether sulfone) (SPAES) with pendant propenyl moiety and various amounts of vinyl substituted silica via sol-gel process which are then thermally crosslinked in the presence of benzoyl peroxide (BPO) initiator. The obtained membranes are characterized in terms of oxidative stability, thermal property, ion exchange capacity (IEC), water uptake, swelling ratio in methanol aqueous solution, proton conductivity, and methanol permeability coefficient. The results indicate that the oxidative stability and thermal stability of the hybrid membranes are improved. Moreover, introduction of silica reduces the water uptake and methanol swelling of membranes. The swelling ratio of membranes in 2 mol L⁻¹ methanol aqueous solution at 80 °C slowly decreases from 26 to 19% with the increase of SiO₂ content from 0 to 12 wt.%. Furthermore, with the increase in silica content, the methanol permeability coefficient of the hybrid membranes decreases at first and then increases. When the silica content reaches 8 wt.%, the methanol permeability coefficient is at the minimum of 6.02 × 10⁻⁷ cm² s⁻¹, a 2.64-fold decrease compared with that of the pristine SPAES membrane. Moreover, the proton conductivity is found to be at about 95% of that of pristine polymer at that silica content.     

Nafion/Pd–SiO2 nanofiber composite membranes for direct methanol fuel cell applications

One of the major challenges for direct methanol fuel cells is the problem of methanol crossover. With the aim of solving this problem without adverse effects on the membrane conductivity, Nafion/Palladium–silica nanofiber (N/Pd–SiO₂) composite membranes with various fiber loadings were prepared by a solution casting method. The silica-supported palladium nanofibers had diameters ranging from 100 nm to 200 nm and were synthesized by a facile electro-spinning method. The thermal properties, ionic exchange capacities, water uptake, proton conductivities, methanol permeabilities, chemical structures, and micro-structural morphologies were determined for the prepared membranes. It was found that the transport properties of the membranes were affected by the fiber loading. All of the composite membranes showed higher water uptake and ion exchange capacities compared to commercial Nafion 117 and proved to be thermally stable for use as proton exchange membranes. The composite membranes with optimum fiber content (3 wt%) showed an improved proton conductivity of 0.1292 S cm⁻¹ and a reduced methanol permeability of 8.36 × 10⁻⁷ cm² s⁻¹. In single cell tests, it was observed that, the maximum power density measured with composite membrane is higher than those of commercial Nafion 117.     

Novel sulfonated poly(ether ether ketone)s containing nitrile groups and their composite membranes for fuel cells

A series of novel sulfonated poly(ether ether ketone)s containing a cyanophenyl group (SPEEKCNxx) are prepared based on (4-cyano)phenylhydroquinone via nucleophilic substitution polycondensation reactions. To further improve their properties, novel composite membranes composed of sulfonated poly(ether ether ketone)s containing cyanophenyl group as an acidic component and aminated poly(aryl ether ketone) as a basic component are successfully prepared. Most of the membranes exhibit excellent thermal, oxidative and dimensional stability, low-swelling ratio, high proton conductivity, low methanol permeability and high selectivity. The proton conductivities of the membranes are close to Nafion 117 at room temperature. And especially, the values of SPEEKCN40 and its composite membranes are higher than Nafion 117 at 80 °C (0.17 S cm⁻¹ of Nafion, 0.26 S cm⁻¹ of SPEEKCN40, 0.20 S cm⁻¹ of SPEEKCN40-1, and 0.18 S cm⁻¹ of SPEEKCN40-2). Moreover, the methanol permeability is one order magnitude lower than that of Nafion 117. All the data prove that both copolymers and their composite membranes may be potential proton exchange membrane for fuel cells applications.     

Synthesis and characterization of cross-linked quaternized poly(vinyl alcohol)/chitosan composite anion exchange membranes for fuel cells

Novel cross-linked composite membranes were synthesized to investigate their applicability in anion exchange membrane fuel cells. These membranes consist of quaternized poly(vinyl alcohol) (QAPVA) and quaternized chitosan (2-hydroxypropyltrimethyl ammonium chloride chitosan, HACC) with glutaraldehyde as the cross-linking reagent. The membranes were characterized in term of their water content, ion exchange capacity (IEC), ion conductivity and methanol permeability. FTIR, X-ray diffraction and scanning electron microscopy (SEM) were also used to investigate the relation between the structure and performance of the composite membranes. The composite membranes have a high conductivity (10⁻³ to 10⁻² S cm⁻¹), and a low methanol permeability (from 5.68 × 10⁻⁷ to 4.42 × 10⁻⁶ cm² s⁻¹) at 30 °C. After reviewing all pertinent characteristics of the membranes, we find that the membrane structure is the principal factor affecting the conductivity and methanol permeability of these membranes.     

Preparation of nitrated sulfonated poly(ether ether ketone) membranes for reducing methanol permeability in direct methanol fuel cell applications

Sulfonated poly(ether ether ketone)s (SPEEKs) were further substituted on the polymer main chain by nitration. All sulfonation and nitration were achieved with an inexpensive and simple post substitute reaction. The nitrated SPEEKs have a high glass transition temperature and thermal decomposition temperature, and a lower water uptake than SPEEK, which provides sufficient mechanical strength without swelling in the direct methanol fuel cell (DMFC) application. The methanol permeability of nitrated SPEEKS is reduced to 1.76 × 10⁻⁷ cm² s⁻¹ for S53N22 and 1.86 × 10⁻⁷ cm² s⁻¹ for S63N17 with no loss of conductivity in the DMFC application, and a proton conductivity that reached 0.026 S cm⁻¹. The nitrated SPEEK membranes satisfy the requirements of proton-exchange membranes for the DMFC.     

Interpenetrating network-forming sulfonated poly(vinyl alcohol) proton exchange membranes for direct methanol fuel cell applications

Poly (vinyl alcohol) was sulfonated and subsequently cross-linked by a thermal curing reaction with dual cross-linkers to prepare membranes for direct methanol fuel cells. Sulfonated poly (vinyl) alcohol (SPVA) with a high degree of sulfonation was synthesized from 4-Formylbenzene-1,3-disulfonic acid disodium salt hydrate via an acetalization reaction with PVA. Various masses of the cross-linking agents 1,3-bis(3-glycidyloxypropyl) tetramethyldisiloxane and 4,4′-oxydiphthalic anhydride were polymerized with SPVA to facilitate manipulation of the properties of the membranes. Notably, the SPVA3 showed excellent proton conductivity (cf. σ  = 0.218 S cm⁻¹ at 70 °C and Nafion 117 = 0.127 S cm⁻¹), and low methanol permeability (around one half of that Nafion 117). These results suggest that the cross-linked SPVA membranes hold promise as potential proton exchange membranes and given their high proton conductivity and low methanol permeability they may offer advantages when used in direct methanol fuel cells (DMFCs) applications.