Implications of elbow arthrodesis for individuals with paraplegia

A 38-year-old woman who had a recent injury resulting in T-3 Frankel Class C paraplegia and a comminuted fracture of the right elbow is described in this case report. The elbow required an arthrodesis, but the position in which the elbow should be fused was not initially known. To illustrate to the rehabilitation team and the patient the advantages and disadvantages of each of two elbow positions under consideration for the arthrodesis, the author recruited an individual with paraplegia to demonstrate some activities of daily living with two elbow splints that stimulated the two positions of fusion being considered. The patient and the rehabilitation team concluded that the 30-degree flexion fusion offered more functional mobility than the 90-degree flexion fusion. At the completion of her initial rehabilitation, the patient was a full-time manual wheelchair user. She was independent in all self-care and transfers, including uneven transfers to heights of 22.9 cm (9 in) over and 45.7 (18 in) lower than the wheelchair seat. She drives a four-wheel-drive vehicle and is independent in stowing her wheelchair.     

Lunotriquetral arthrodesis

Lunotriquetral arthrodesis has been recommended for the treatment of disabling pain at the lunotriquetral joint after more conservative measures have failed. We retrospectively analyzed a series of 22 patients treated with a lunotriquetral arthrodesis for presence of fusion, method of fixation, duration of immobilization, carpal alignment, pain relief, and ability to return to work. Fixation with a Herbert screw supplemented with a Kirschner wire (K-wire) was superior to fixation with K-wires alone. Immobilization longer than 6 weeks was superior to immobilization less than 6 weeks. Combined use of a Herbert screw supplemented with a K-wire and immobilization longer than 6 weeks resulted in union in all patients, even when performed for nonunion after a prior attempted arthrodesis. Pain was improved in all patients; all patients who previously were working returned to work. Routine posteroanterior and lateral x-ray films often failed to adequately profile the arthrodesis site. We recommend using a Herbert screw supplemented with a K-wire for lunotriquetral arthrodesis and keeping the patient in a cast until fusion is documented, usually at least 8 weeks. Fluoroscopic spot views or tomograms are recommended to demonstrate bone fusion.     

Technique and clinical evaluation of arthroscopic ankle arthrodesis

Arthroscopic ankle arthrodesis has recently been shown to be an effective procedure with significant advantages when properly indicated. We report on the results of arthroscopic ankle fusion in 16 patients with idiopathic or posttraumatic osteoarthritis and rheumatoid disease. We used standard ankle arthroscopic technique and simple noninvasive distraction with hanging weights. All 16 patients had a successful fusion at an average of 9.5 weeks postoperatively. Complications included 1 lateral cutaneous neuroma, and 1 patient who required removal of screws because of superficial pain. Postoperative evaluation showed complete resolution of pain in 14 of 16 patients and significant improvement in gait. Fourteen of 16 patients were completely satisfied with the result and cosmesis, and only 1 patient required shoe modification. These results substantiate previous reports that arthroscopic ankle arthrodesis is successful, and where indicated, has significant advantages over the open technique.     

Video-assisted lateral intertransverse process arthrodesis. Validation of a new minimally invasive lumbar spinal fusion technique in the rabbit and nonhuman primate (rhesus) models

STUDY DESIGN: Cadaveric anatomic and in vivo survival animal studies were performed to develop a new arthrodesis technique for the lumbar spine. OBJECTIVES: To examine the feasibility, efficacy, and safety of a minimally invasive lumbar intertransverse process arthrodesis technique using an osteoinductive growth factor (rhBMP-2) delivered in a collagen sponge carrier. The technique was first developed using a rabbit model and modified for the nonhuman primate (rhesus monkey), a larger animal with the most similar bone biology to humans. SUMMARY OF BACKGROUND DATA: The morbidity of conventional posterolateral lumbar intertransverse process arthrodesis includes graft donor site morbidity; paraspinal muscle devascularization, denervation, and scarring and nonunion in up to 36% of patients. Minimally invasive anterior lumbar interbody arthrodesis techniques have been developed, but these often require a metal implant and carry risks to major vessels and development of retrograde ejaculation. A minimally invasive technique for posterolateral intertransverse process arthrodesis has not been described previously. METHODS: In Part 1, we examined seven New Zealand white rabbits and five rhesus monkeys at necropsy and during nonsurvival surgeries to determine the best access routes and to develop special instruments for video-assisted lateral intertransverse process arthrodesis. In Part 2, 38 New Zealand white rabbits underwent L4-L5 intertransverse process arthrodesis: the "OPEN" group (n = 16) underwent a standard open muscle-splitting approach using rhBMP-2 (bone morphogenetic protein) and collagen as a bone graft substitute; the "video-assisted control" group (n = 6) underwent video-assisted lateral intertransverse process arthrodesis with the collagen implant only (no growth factor); and the "video-assisted-BMP" group (n = 16) underwent video-assisted lateral intertransverse process arthrodesis with rhBMP-2 and collagen as the graft material. In Part 3, rhesus monkeys (n = 4) underwent video-assisted lateral intertransverse process arthrodesis using rhBMP-2 and collagen after laminectomy of L4-L5. RESULTS: In Part 1, we identified expedient, minimally invasive routes to the intertransverse process interval appropriate for each species: an intermuscular approach for the rabbit and a lateral, extramuscular approach for the rhesus monkey. In Part 2, all rabbits in the OPEN and video-assisted-BMP groups achieved solid intertransverse process lumbar fusions when assessed at 10 weeks. There were no neurologic impairments nor any difference between the two groups in the frequency of postoperative infection or other complications. None of the animals in the video-assisted control group showed evidence of fusion. In Part 3, exposure, decortication and grafting with rh-BMP-2 and collagen was accomplished successfully in all four monkeys through the video-assisted minimally invasive approach without complications. CONCLUSION: Video-assisted lateral intertransverse process arthrodesis is a feasible, effective, and safe method of lumbar spinal fusion in the rabbit and rhesus monkey. Use of this arthrodesis procedure will minimize the morbidity of paraspinal muscle denervation and devascularization seen with open intertransverse process fusion techniques, and the use of an osteoinductive growth factor will eliminate the problem of graft donor site morbidity and possibly increase the chances for successful fusion.     

Deformity correction and arthrodesis of the midfoot with a medial plate

Nine feet in eight patients undergoing tarsometatarsal (Lisfranc) or other midfoot arthrodeses for posttraumatic or degenerative arthritis were reviewed retrospectively. All patients were treated using a medial one-third tubular plate spanning the midfoot joints to be fused. Three feet underwent fusion in situ while six feet underwent correction of residual planus, planovalgus, or cavovarus deformity at the time of fusion. All patients achieved fusion within 12 weeks. A good or excellent result was achieved in seven of nine feet. There was no radiographic or clinical evidence of pseudarthrosis or medial hardware failure in any patient. No patient to date has required hardware removal for a painful or prominent implant. The talus first metatarsal angle was improved an average of 15.5 degrees in the lateral plane and 10 degrees in the AP plane in patients undergoing deformity correction. The technique of using a medial plate for midfoot arthrodesis allows for reliable fusion in patients who require salvage for midfoot arthritis. This technique also allows for correction of deformity in patients with residual midfoot deformity.     

Arthrodesis of finger joints by dynamic external compression using dorsoventral Kirschner wires and rubber bands

A new method is presented for arthrodesis of small joints in the hand. In this method Kirschner wires are inserted dorsoventrally through the phalanges on either side of the joint, and the external ends bent into hooks. Longitudinal compression is achieved by connecting these hooks with rubber bands. This technique gives a solid and painless immobilization in a proper position, and the latter can be corrected easily when necessary. We arthrodesed 46 joints in 39 patients by this method in 1975 and 1976. The fusion time was 4 to 6 weeks, and the method produced a good bony arthrodesis in 42 of the 46 fingers.     

Stress fracture of the tibia after arthrodesis of the ankle or the hindfoot

We studied twelve patients who had a stress fracture of the tibia and one patient who had a stress fracture of the fibula after arthrodesis of the ankle or the foot. A second stress fracture subsequently developed in two patients. All but two patients were managed non-operatively, and the fractures healed uneventfully. One patient who was managed operatively had a below-the-knee amputation to treat a painful non-union of a tibial fracture, and the other had interlocking intramedullary nailing for a displaced fracture. All but one of the arthrodesis sites had fused before the stress fracture occurred. All of the stress fractures that occurred after arthrodesis of the ankle were in the middle and distal aspects or the distal aspect of the tibia, while those that occurred after triple arthrodesis were in the distal aspect of the fibula or the medial malleolus. Although six of the thirteen patients still had uncorrected alignment and deformity after the arthrodesis, optimum alignment after the arthrodesis did not preclude the occurrence of a stress fracture. We conclude that stress fracture must be considered in the differential diagnosis of pain months or even years after solid fusion at the site of an ankle or triple arthrodesis.     

Congenital scoliosis with posterior spinal arthrodesis T2-L3 at age 3 years with 41-year follow-up. A case report

STUDY DESIGN: A case report. OBJECTIVES: To document the long-term effects of early fusion for progressive congenital scoliosis. SUMMARY OF BACKGROUND DATA: There is concern about fusion at an early age causing torso shortening and possible crankshaft phenomenon. METHODS: A review of medical and radiologic records. RESULTS: A 3-year old girl with progressive congenital scoliosis had posterior spinal arthrodesis in 1955. A pseudarthrosis was repaired at age 4, and at age 8 she had an osteotomy of the fusion mass because of bending of the fusion mass. In a follow-up 41 years after fusion, she has no back pain and no history of pulmonary problems. Despite the long fusion at a young age, her torso-to-leg ratio was remarkably good. The thoracic lordosis had improved to a normal thoracic kyphosis. CONCLUSION: Early arthrodesis was life saving and caused no long-term problems. Because significant spinal growth has occurred by age 3, no adverse effects on torso-leg ratio with an early long arthrodesis, and in addition the crankshaft phenomenon is rare in congenital scoliosis.     

Wrist fusion

Wrist arthrodesis is a reliable procedure for the treatment of a variety of disorders of the wrist. It provides predictable pain relief, enhanced hand function, and a high degree of patient satisfaction. The AO/ASIF wrist fusion plate allows rigid internal fixation and optimizes wrist position for maximum hand function. In comparison to other wrist arthrodesis techniques, the wrist fusion plate produces a high rate of fusion utilizing local bone graft from the distal radius.     

Long-term followup of rheumatoid forefoot surgery

Rheumatoid forefoot deformities were treated originally at the Rheumatism Foundation Hospital by metatarsal head resection (II-V) and resection of the base of the proximal phalanx of the great toe. Recurrent great toe deformity with pain in numerous cases led to a comparative series of arthrodesis of the first metatarsophalangeal joint with resection of lesser metatarsal heads. At an average followup period of 3 years, the clinical evaluation and patient assessments were slightly in favor of arthrodesis. However, the patients' evaluation at 14 years was slightly in favor of resection. Measured in the plane of the first metatarsophalangeal joint, the recommended fusion position is 15 degrees valgus and 30 degrees dorsiflexion (females) and 25 degrees dorsiflexion (males). The position of the fusion is critical for a successful surgical outcome. Although both surgical methods give good pain relief and patient satisfaction, there is a risk of reoperation in the long term.     

Wrist arthrodesis for failed wrist implant arthroplasty

Thirteen wrist arthrodeses were performed for failed wrist implant arthroplasties between 1984 and 1992. Twelve patients were available for review, with an average follow-up period of 28 months. The original arthroplasties consisted of 8 silicone implants and 4 metal-plastic total wrist implants. The surgical method involved a tricortical iliac bone graft and an intramedullary Steinmann pin. There were 7 excellent results, 4 good results, and 1 poor result. All but 1 patient had markedly improved function with no or mild pain. Seven patients had solid fusions and 5 patients had pseudarthroses. Four pseudarthroses occurred at the graft-metacarpal junction and 1 occurred at the graft-radius junction. Each patient with a solid fusion had an excellent result. All graft-metacarpal pseudarthroses were painless and did not limit the patients' activities. There were 17 complications in 9 patients. Wrist arthrodesis can be a successful salvage procedure for failed wrist implant arthroplasty in patients with rheumatoid arthritis. However, the complication rate can be high. Owing to the high incidence of distal graft-metacarpal pseudarthrosis, we recommend using more rigid fixation techniques in patients with failed wrist arthroplasties.     

1997 Volvo Award winner in clinical studies. Degenerative lumbar spondylolisthesis with spinal stenosis: a prospective, randomized study comparing decompressive laminectomy and arthrodesis with and without spinal instrumentation

STUDY DESIGN: This prospective study analyzed the influence of transpedicular instrumented on the operative treatment of patients with degenerative spondylolisthesis and spinal stenosis. OBJECTIVES: To determine whether the addition of transpedicular instrumented improves the clinical outcome and fusion rate of patients undergoing posterolateral fusion after decompression for spinal stenosis with concomitant degenerative spondylolisthesis. SUMMARY OF BACKGROUND DATA: Decompression is often necessary in the treatment of symptomatic patients who have degenerative spondylolisthesis and spinal stenosis. Results of recent studies demonstrated that outcomes are significantly improved if posterolateral arthrodesis is performed at the listhesed level. A meta-analysis of the literature concluded that adjunctive spinal instrumentation for this procedure can enhance the fusion rate, although the effect on clinical outcome remains uncertain. METHODS: Seventy-six patients who had symptomatic spinal stenosis associated with degenerative lumbar spondylolisthesis were prospectively studied. All patients underwent posterior decompression with concomitant posterolateral intertransverse process arthrodesis. The patients were randomized to a segmental transpedicular instrumented or noninstrumented group. RESULTS: Sixty-seven patients were available for a 2-year follow-up. Clinical outcome was excellent or good in 76% of the patients in whom instrumentation was placed and in 85% of those in whom no instrumentation was placed (P = 0.45). Successful arthrodesis occurred in 82% of the instrumented cases versus 45% of the noninstrumented cases (P = 0.0015). Overall, successful fusion did not influence patient outcome (P = 0.435). CONCLUSIONS: In patients undergoing single-level posterolateral fusion for degenerative spondylolisthesis with spinal stenosis, the use of pedicle screws may lead to a higher fusion rate, but clinical outcome shows no improvement in pain in the back and lower limbs.     

Optic disc morphology in pigmentary glaucoma

To establish the ability of a salvage procedure to restore an independent lifestyle, the SF-36 functional outcome instrument and the pain, mobility, and physical activity subscales of the Arthritis Impact Measurement Scale (AIMS) was used to assess patient function. Nine patients (10 knees) who had undergone arthrodesis for failed total knee arthroplasty were compared with a control group of successful primary total knee arthroplasty patients. Average clinical follow-up was 42 months (minimum: 24 months). For six of the eight SF-36 categories, the average scores for the arthrodesis and arthroplasty groups were similar. The average global scores for the two groups were nearly identical. The arthroplasty patients scored better on the AIMS physical activity and mobility subscales than the arthrodesis group, although the latter group fared better on the pain subscale. Overall, global scores favored the arthroplasty patients. The only subscales to show a statistically significant difference between the arthrodesis and arthroplasty groups were the SF-36 physical functioning and the AIMS physical activity subscales. This pilot study demonstrated the ability of a salvage procedure to allow for an independent lifestyle with minimal complications. Furthermore, despite its popularity, the SF-36 does not appear as sensitive as the AIMS to differences in functional status or health outcomes between total knee arthroplasty and arthrodesis patients.     

Failed total wrist arthroplasty. Analysis of failures and results of operative management

Nine metal on polyethylene total wrist arthroplasties were revised for failure, including eight trispherical devices and one Volz implant. Causes of failure include sepsis in one patient, progressive wrist flexion contracture in two patients, and mechanical failure in six patients. The most common mode of mechanical failure was metacarpal loosening with dorsal perforation of the stem. This was associated with an intact articulation between the third metacarpal and the capitate, with a proximal position of the metacarpal component in the shaft, and with poor cement fill of the metacarpal shaft. The one infected wrist was managed with resection arthroplasty. Five patients had conversion to a wrist arthrodesis and three patients underwent revision total wrist arthroplasty with custom trispherical components. Followup averaged 3.3 years. All patients undergoing arthrodesis attained a solid painless fusion after a single operation at an average of 4.8 months. The three patients treated with revision arthroplasty had wrists that were pain free, functional, and had no evidence of loosening at latest followup. Failed total wrist arthroplasties can be salvaged successfully to either a fusion or a revision arthroplasty in most patients.     

Proximal interphalangeal joint arthrodesis using powered staple fixation. Observations on autopsy specimens

A new method for internal fixation using power-driven staples was recently developed. In theory, this new technique should be ideal in performing small joint arthrodesis. In autopsy specimens, the biomechanical properties were observed in simulated proximal interphalangeal joint arthrodesis (PIP). The tension-band technique, acting as a control, was significantly superior. The two techniques had similar biomechanical properties. The three 7- x 7-mm staples is recommended. The tension-band technique remains the technique of choice in small joint arthrodesis.     

Surgery of the upper cervical spine in rheumatoid arthritis. Indications and results apropos of 28 cases

PURPOSE OF THE STUDY: The goal of this study was to precise indications and surgical techniques for stabilisation with or without decompression of the upper cervical spine instability in rheumatoid arthritis. MATERIAL AND METHODS: 28 patients presenting upper cervical spine disease have been reviewed (mean age 57 years). These patients had been suffering from severe diffuse arthritis during an average of 14.5 years. The anterior atlanto-axial dislocation was most frequent (25 times), 1 posterior dislocation and 2 vertical dislocations. Odontoid lysis was noted 19 times. A subluxation of the lower cervical spine was present in 12 patients. SURGICAL TECHNIQUE: C1-C2 arthrodesis was performed 12 times (9 times with a loop wire and 3 isthmo-pedicular screws C2-C1), occipito-cervical arthrodesis with plates 16 times. Operative traction was necessary 5 times. The associated surgical gestures included 3 times a laminectomy, 2 times an enlargement of the occipital foramen, 1 section of the Arnold nerve. In 2 patients was associated a fixation of the lower cervical spine. RESULTS: With an average of 27 months follow-up, functional results (classified according to Ranawat's criteria) were satisfactory in 14 patients, improved in 7 patients, unchanged in 4 and bad in 3. The reduction of the anterior displacement in 25 patients was complete 11 times, partial 17 times and null 3 times. The reduction of the vertical displacement was complete once, partial 3 times. Arthrodesis fusion was obtained in 19 cases, 5 times it was a fibrous union and 4 pseudarthrosis occurred, all with C1-C2 loop wire. The rate of complications was high: 2 infections on bone site grafting requiring reoperation, 2 infections with secondary septicemia after lack of reduction. DISCUSSION AND CONCLUSION: Occipito-cervical arthrodesis is necessary as soon as the patient presents neurological signs. When there is an anterior dislocation associated with vertical dislocation, if there is posterior dislocation in case of osteoporosis of the posterior C1-C2 arc, or destabilisation of the lower cervical spine. C1-C2 arthrodesis is suggested when there is no important neurological signs, when displacement is limited to a pure anterior dislocation and in young patient with good bone quality.     

Long-term followup of patients with autogenous resection arthrodesis of the knee

Arthrodesis of the knee may be indicated for the reconstruction after resection of tumor around the knee. Since the introduction of this technique, resection arthrodesis using segmental autogenous grafts has been the principal method of reconstruction. From August 1967 to February 1985, 73 patients underwent resection arthrodesis using autogenous grafts. All procedures were performed for malignant or potentially malignant lesions. Ten-year followup was available on 40 patients. The reconstructive procedure was performed using an intramedullary rod and hemicortical femoral or tibial grafts with a single autogenous nonvascularized fibula or with dual nonvascularized fibulae. Despite a high surgical complication rate, the majority of patients achieved successful limb salvage. Independent ambulation was achieved by 86% of the patients. A Musculoskeletal Tumor Society functional evaluation in 32 available patients at a mean of 17 years showed the majority of patients functioning satisfactorily. Long-term followup of these patients shows continued durability of the reconstruction and a persistent high level of function and patient satisfaction. Resection arthrodesis using massive autogenous grafts should continue to be in the armamentarium of the orthopaedic oncologist.     

Complications of the use of the Harrison-Nicolle Intramedullary Peg in digital arthrodesis

The Harrison-Nicolle Intramedullary Peg is used for the arthrodesis of digital joints. We report our experience of complications found using this peg in a series of 16 arthrodeses. At review after an average of 2.9 years, three cases had been revised. Only five of the remaining 13 cases showed a bony fusion and in only two of these five was the fusion in an acceptable position. In nine cases the joint became straight or extended; the preset angle of the peg did not determine the final angle of the arthrodesis. In five cases the tips of the peg appeared to be eroding through bone.     

Reconstruction of chronic rupture of the extensor mechanism after patellectomy

Chronic extensor mechanism ruptures are uncommon but challenging clinical problems. Previously published procedures for treating chronic extensor mechanism ruptures assume an intact patella is available to anchor the repair. A case is presented of a patient who had a previous patellectomy, followed by rupture of the extensor mechanism. After two failed attempts at repair, an Achilles tendon allograft was used successfully to restore function of the extensor mechanism. The described technique offers an alternative for reconstruction of the extensor mechanism after patellectomy.