Tunable emission,energy transfer and thermal stability of Ce3+, Tb3+ co-doped Na2BaCa(PO4)2 phosphors

A series of single Ce³⁺ doped and Ce³⁺ and Tb³⁺ co-doped Na₂BaCa(PO₄)₂ (NBCP) phosphors was synthesized by conventional solid-stated reaction method. The crystal structure, luminescence properties, thermal stability and energy transfer were carefully investigated. Ce³⁺ is inferred to substitute the Ba²⁺ site in NBCP lattice. The color-tunable emission from blue to green is observed by adjusting Tb³⁺ concentration among NBCP:0.03Ce³⁺,yTb³⁺ phosphors. The energy transfer behavior from Ce³⁺ to Tb³⁺ ions is both illustrated by co-doped PL spectra and decay curves. The energy transfer efficiency is as high as 91.5%. The mechanism of energy transfer is resonance type of dipole-dipole transition. In this work, the optimal phosphor exhibits the excellent thermal stability which keeps at 94.9% of that initial value at room temperature when temperature reaches to 150 °C. The Ce³⁺ and Tb³⁺ co-doped NBCP phosphor is a promising candidate for the application in the general lighting and display fields.     

Synthesis and optical characterization of Eu2+,Tb3+-codoped Sr3Y(PO4)3 green phosphors

A series of Eu~(2+),Tb~(3+)-codoped Sr_3 Y(PO_4)_3(SYP) green phosphors were synthesized by hightemperature solid-state reaction. Several techniques, such as X-ray diffraction, UV-vis spectrum,and photoluminescence spectrum, were used to investigate the obtained phosphors. The present study investigates in detail photoluminescence excitation and emission properties, energy transfer between the two dopants, and effects of doping ions on optical band gap. SYP:0.05 Eu2+ phosphor shows an intense and broad excitation band ranging from 220 to 400 nm and exhibits a bright green emission band with CIE chromaticity coordinates(0.189, 0.359) under 350 nm excitation. Green emission of SYP:0.03 Tb3+ is intensified by codoping with Eu~(2+), and energy transfer mechanism between them is demonstrated to be a dipole-dipole interaction. Upon 350 nm excitation, SYP:Eu~(2+),Tb~(3+) phosphors exhibits two dominating bands peaking at 466 and 545 nm, which are assigned to 4 f~65 d~1→4 f~7 transition of Eu~(2+) ions and ~5 D_4→~7 F_5 transition of Tb~(3+) ions, respectively. Optimal doping concentrations of Eu~(2+) and Tb~(3+) in the SYP host are 5 mol% and 15 mol%, respectively. Results indicate that SYP:Eu~(2+),Tb~(3+) phosphors are potentially used as green-emitting phosphors for white light-emitting diodes.     

A single-phase full-color phosphor Sr2Ca2La(PO4)3O:Eu2+,Tb3+,Mn2+: Photoluminescence and energy transfer

A single-phase full-color emitting phosphor Sr₂Ca₂La(PO₄)₃O:Eu²⁺,Tb³⁺,Mn²⁺ was synthesized by the high temperature solid-state method. The phase formation, luminescence properties, thermal stability, and energy transfer from Eu²⁺ to Tb³⁺ and Eu²⁺ to Mn²⁺ in Sr₂Ca₂La(PO₄)₃O were investigated in details. Tunable emission color from blue to blueish green or orange can be observed under 365 nm near-ultraviolet excitation based on the energy transfer from Eu²⁺ to Tb³⁺ or Mn²⁺ ions by varying the ratio of Eu²⁺/Tb³⁺ or Eu²⁺/Mn²⁺ ions. White light was obtained with chromaticity coordinates of (0.3558, 0.3500) in the Sr₂Ca₂La(PO₄)₃O:0.04Eu²⁺,0.08Tb³⁺,0.40Mn²⁺ phosphor, suggesting their potential applications in white light emitting diodes.     

Color-tunable Ca10Na(PO4)7:Ce3+/Tb3+/Mn2+ phosphor via energy transfer

A series of Ca_(10)Na(PO_4)_7:Ce~(3+)/Tb~(3+)/Mn~(2+)(CNPO:Ce~(3+)/Tb~(3+)/Mn~(2+)) phosphors with high brightness were synthesized by high-temperature solid-state method. X-ray diffraction(XRD), scanning electron microscopy(SEM), diffuse reflectance spectra(DRS), photo luminescence(PL) spectra, luminescence decay curves and thermally stability were performed to characterize the as-prepared samples. For Ce~(3+)-doped samples, an intense and broad band emission is present under 265 nm excitation. When Ce~(3+) and Tb~(3+)are codoped, energy transfer(ET) process from Ce3+ to Tb3+ is demonstrated with electric dipole-dipole interaction. The internal and external quantum efficiencies(QEs) of CNPO:0.15 Ce~(3+), 0.04 Tb~(3+), 0.005 Mn~(2+)are measured to 76.79% and 54.11% under 265 nm excitation and temperature-dependent PL intensity can remain 51.78% at 150 ℃ of its initial intensity at 25 ℃. It is indicated that single-phased white lightemitting CNPO:Ce~(3+)/Tb~(3+)/Mn~(2+) phosphor can serve as a promising phosphor for illumination devices.     

Multi-site occupancies and luminescence properties of cyan-emitting Ca9-xNaGd2/3(PO4)7:Eu2+phosphors for white light-emitting diodes

Cyan-emitting Ca₉NaGd_2/3(PO₄)₇:Eu²⁺phosphors were synthesized via high temperature solid-state route.X-ray powder diffraction(XRD)and scanning electron microscopy(SEM)were used to verify the phase and morphology of the Ca₉NaGd_2/3(PO₄)₇:Eu²⁺(CNGP:Eu²⁺)phosphors.The as-obtained phosphor exhibits a broad excitation band of 250-420 nm,which is near the ultraviolet region.An intense asymmetric cyan emission at 496 nm corresponds to the 5 d-4 f transition of Eu²⁺.The multiplesite luminescent properties of Eu²⁺ions in CNGP benefit from versatile structure ofβ-Ca3(PO4)2 compounds.The effective energy transfer distance is 5.46 nm(through the spectral overlap calculation),validating that the resonant energy migration type is via dipole-dipole interaction mechanism.Compared to the initial one at room temperature,the luminescent intensity of CNGP:Eu²⁺phosphor can maintain 77%as it is heated up to 420 K.A white light-emitting diode(WLED)with excellent luminesce nt properties was successfully fabricated.Moreover,the CIE chromaticity coordinates of fabricated WLED driven by changing current just change slightly.     

Ln3+ (Ln = Eu,Dy) - doped Sr2CeO4 fine phosphor particles: Wet chemical preparation,energy transfer and tunable luminescence

The Sr₂CeO₄:Ln³⁺ (Ln = Eu, Dy) fine phosphor particles were prepared by a facile wet chemical approach, in which the consecutive hydrothermal-combustion reaction was performed. The doping of Ln³⁺ into Sr₂CeO₄ has little influence on the structure of host, and the as-prepared samples display well-crystallized spherical or elliptical shape with an average particle size at about 100–200 nm. For Eu³⁺ ions-doped Sr₂CeO₄, with the increase of Eu³⁺-doping concentration, the blue light emission band with the maximum at 468 nm originating from a Ce⁴⁺ → O²⁻ charge transfer of the host decreases obviously and the characteristic red light emission of Eu³⁺ (⁵D₀→⁷F₂ transition at 618 nm) is enhanced gradually. Simultaneously, the fluorescent lifetime of the broadband emission of Sr₂CeO₄ decreases with the doping of Eu³⁺, indicating an efficient energy transfer from the host to the doping Eu³⁺ ions. The energy transfer efficiency from the host to Eu³⁺ was investigated in detail, and the emitting color of Sr₂CeO₄:Eu³⁺ can be easily tuned from blue to red by varying the doping concentration of Eu³⁺ ions. Moreover, the luminescence of Dy³⁺-doped Sr₂CeO₄ was also studied. Similar energy transfer phenomenon can be observed, and the incorporation of Dy³⁺ into Sr₂CeO₄ host leads to the characteristic emission of ⁴F_9/2 → ⁶H_15/2 (488 nm, blue light) and ⁴F_9/2 → ⁶H_13/2 (574 nm, yellow light) of Dy³⁺. The Sr₂CeO₄:Ln³⁺ fine particles with tunable luminescence are quite beneficial for its potential applications in the optoelectronic fields.     

White-light emitting single-phase phosphor La3Si6N11:Dy3+,Tb3+: Color tunable emission,thermal stability and energy transfer process

A novel white-light emitting single-phase phosphor La₃Si₆N₁₁:Dy³⁺, exhibiting two emission peaks centering at 475 and 575 nm, was prepared via conventional solid-state reactions. The structure and morphology of La₃Si₆N₁₁:Dy³⁺/Tb³⁺ were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The emission colors can be tuned from white to yellow-green through increasing the Tb³⁺ concentration in La₃Si₆N₁₁:Dy³⁺,Tb³⁺. The mechanism of energy transfer (ET) from Dy³⁺ to Tb³⁺ is confirmed according to the excitation, emission spectra and decay lifetimes curve. The temperature-dependent luminescence measurements of La_2.83Si₆N₁₁:0.1Dy³⁺,0.07Tb³⁺ were also performed, and a good thermal stability is shown, suggesting superior properties for the application as white light-emitting diodes (w-LEDs) phosphor.     

Eu2+-doped Sr5(PO4)3Br blue-emitting phosphor with high color purity for near-UV-pumped white light-emitting diodes

Eu²⁺-doped bromophosphateapatite Sr₅(PO₄)₃Br phosphors were synthesized by the conventional high-temperature solid-state reaction. The crystal structure and luminescence properties of the phosphors, as well as their thermal stability and CIE chromaticity coordinates were systematically investigated. Photoluminescence spectra of Sr₅(PO₄)₃Br:Eu²⁺ exhibit a single blue emission at 450 nm under the excitation of 345 nm, which is ascribed to the 4f–5d transition of Eu²⁺. The phosphor shows very good thermal stability. The CIE color coordinates are very close to those of BaMgAl₁₀O₁₇:Eu²⁺ (BAM). All the properties indicate that the blue-emitting Sr₅(PO₄)₃Br:Eu²⁺ phosphor has potential application in white LEDs.     

Site occupation and energy transfer in full color emitting phosphor Ba2Ca(BO3)2:Ce3+(K+),Eu2+,Mn2+

White light-emitting diodes (WLEDs) fabricated by single-phase full color emitting phosphor are an emerging solution for health lighting. The crystallographic site occupation of activators in a proper host lattice is crucial for sophisticated design of such phosphor. Here, we report a high quality white light-emitting phosphor Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ with spectral distribution covering whole visible region. Blue light emission originates from Ce³⁺ ions occupying preferentially Ba²⁺ site by controlling synthesis conditions. Green and red lights are obtained from Eu²⁺ occupying Ba²⁺ (and Ca²⁺) site and Mn²⁺ occupying Ca²⁺ site, respectively. In this triple-doped phosphor, strong red emission with a low concentration of Mn²⁺ is realized by the efficient energy transfer from Ce³⁺ and Eu²⁺ to Mn²⁺. Furthermore, high quality white light is accomplished by properly tuning the relative doping amount of Ce³⁺(K⁺)/Eu²⁺/Mn²⁺ based on efficient simultaneous energy transfer. The results indicate that Ba₂Ca(BO₃)₂:Ce³⁺(K⁺),Eu²⁺,Mn²⁺ is a promising white light-emitting phosphor in WLEDs application.     

Effect of Eu3+ doping on luminescence properties of a KAlSiO4:Sm3+ phosphor

This study presents the photoluminescence characteristic analysis of a series of red phosphors of KAlSiO₄:1.5 mol%Sm³⁺,x mol%Eu³⁺ (x = 2, 3, 4, 5, 6, 7) prepared via high-temperature solid-phase reaction. The results show that the X-ray diffraction (XRD) refinement results are reliable. The unit cell parameters and volume gradually decrease as the Eu³⁺ concentration increases, resulting in a grain size reduction of 10.22%. When x = 6, the emission peaks of Sm³⁺ at 564, 601, and 651 nm disappear completely, and the corresponding full width at half maximum becomes 0. At 610 nm, the emission peak intensity of Eu³⁺ is increased by a factor of 4.8. The resonant non-radiative energy transfer effect is greater than the co-excitation effect. A maximum energy transfer efficiency of 97.8% is achieved. The integral area at 610 nm is as high as 85%. The color purity of the phosphor is as high as 92.97%, and the internal quantum yield gradually changes from 32% to 51%. Ultimately, these results confirm that the silicate phosphor is suitable for the red component in the three primary color phosphors of white light-emitting diodes.     

Tunable luminescence,energy transfer and excellent thermal stability of SrMg_2(PO_4)_2:Ce~(3+),Tb~(3+) phosphors for LEDs

A series of novel SrMg_2(PO_4)_2:Ce~(3+),Tb~(3+)(SMP:Ce~(3+),Tb~(3+)) phosphors with tunable emission spectra were produced via high temperature solid phase method.XRD,fluorescence spectrum and fluorescence lifetime for SMP:Ce~(3+),Tb~(3+)were studied in detail.Under the excitation at 308 nm,SMP:Ce~(3+),Tb~(3+) samples can emit high efficiency tunable blue-green light by controlling the proportion of dopant concentration.Through the spectral overlap and the regular change of fluorescence lifetime,it is proved that there is a significant energy transfer between Ce~(3+) and Tb~(3+) in SMP matrix and the energy transfer mechanism is determined to be an electric dipole-dipole interaction with energy transmission efficiency of 55%.In additional,Commission International de L'Eclairage(CIE) color coordinates and thermal stability were studied.All above findings suggest that SMP:Ce~(3+),Tb~(3+)can be regarded as the potential bluish green phosphor for LED applications.     

Luminescence of halophosphate solid-solution Ca5(PO4)3(F0.8Cl0.2):Eu2+,Mn2+ for WLED

Solid-solution based luminescent materials have been widely explored due to their tunable optical properties in recent years. In this work, instead of more common cation-substitution approach, we investigated the luminescence properties of Eu~(2+) and Mn~(2+) co-doped halophosphate solid solution Ca_5(PO_4)_3(F_(0.8)Cl_(0.2)) via anion substitution synthesized by high temperature solid state reaction method.The formation of the solid solution was confirmed by X-ray diffraction(XRD) characterization, which indicates that the introduction of certain proportion of Cl~-will not make significant change on the Ca_5(PO_4)_3F lattice. We also studied the energy transfer from Eu~(2+) to Mn~(2+) in the host so as to obtain white light emission via adjusting the doping concentrations of Eu~(2+) and Mn~(2+). The white light emission was achieved through combination of Eu~(2+) blue emission and Mn~(2+) red-orange emission with appropriate proportions. The results suggest that Ca_5(PO_4)_3(F_(0.8)Cl_(0.2)):0.01Eu~(2+),0.18 Mn~(2+) could be a potential WLED phosphor working under ultraviolet excitation.     

A stimuli responsive lanthanide-based hydrogel possessing tunable luminescence by efficient energy transfer pathways

Energy transfer as an important component in light-harvesting antenna systems can mimic effectively natural photosynthesis processes, showing great potential in optoelectronic devices. Herein, we report a responsive polymeric hydrogel based on the combination of excited state intramolecular proton transfer (ESIPT) molecule (Salicylic acid, Sal) and terbium (III) (Tb³⁺), as enabled by external stimuli to construct artificial light-harvesting antenna systems. Benefiting from unique photophysical properties of Sal, the synthesized hydrogel displays a temperature-dependent reversible opaque ? transparent states transition, accompanied with an interesting photoluminescence behavior. Moreover, by further incorporating europium (III) (Eu³⁺) into the hydrogel, we demonstrate well-defined cascades of energy transfer that provides a tunable optical output from the collection of lanthanides by the excitation of a common sensitizer (Sal) upon base vapor stimulation. Efficient energy transfer efficiency from Tb³⁺ to Eu³⁺, as high as 97.8%, was also obtained as established by the time-resolved fluorescence spectroscopy analysis.     

Structure and luminescence properties of color-tunable phosphor Sr2La3(SiO4)3F:Tb3+,Sm3+

A series of single-phase and color-tunable phosphors Sr₂La₃(SiO₄)₃F:0.15Tb³⁺,xSm³⁺(SLSOF:0.15Tb³⁺,xSm³⁺) was prepared using solid-state route.The X-ray diffraction(XRD) was used to characterize the phase of the as-prepared samples.The synthesized phosphors have apatite-type structure without other impurities.Sm³⁺ and Tb³⁺ ions substitute La³⁺ into the lattice and form a single...     

Synthesis and photoluminescence properties of Er3+ and Dy3+ doped Na2NbAlO5 phosphors

A series of Ln³⁺ (Ln³⁺ = Er³⁺/Dy³⁺) ions doped Na₂NbAlO₅ (NNAO) phosphors were synthesized by solid-state method. The Er³⁺ and Dy³⁺ ions doped phosphors were characterized by XRD, photoluminescence (PL) and decay profiles. The Ln³⁺-doped samples are consistent with the pure NNAO phase which is analyzed by the X-ray diffraction result. The PL graphs show that the intensity of luminescence increases with the increasing doping concentrations up to their critical certain values and then decreases at higher concentrations due to the concentration quenching effect of Er³⁺/Dy³⁺ ions. The energy level diagrams containing the positions of 4f and 5d energy levels of Er³⁺ and Dy³⁺ ions have been established and studied. In addition, under the ultraviolet light, the prepared NNAO:xLn³⁺ (Ln³⁺ = Er³⁺/Dy³⁺) phosphors show the characteristic green (Er³⁺), cyan (Dy³⁺) emission, respectively. Under the excitation of 365 nm, the quantum efficiencies of NNAO:0.01Er³⁺ and NNAO:0.03Dy³⁺ phosphors are measured to be 61.7% and 72.2%, respectively. The obtained results indicate that the new NNAO:xLn³⁺ (Ln³⁺ = Er³⁺/Dy³⁺) phosphors are promising applications in white-light emitting diodes field.     

Tunable luminescence and energy transfer in Y_2BaAl_4SiO_(12):Tb~(3+),Eu~(3+)phosphors for solid-state lighting

Single-phase Y₂BaAl₄SiO₁₂:Tb³⁺,Eu³⁺phosphors with adjustable luminescence were successfully prepared by high-temperature solid-state reaction method.The structural,luminescent properties and ene rgy transfer(ET) process of Y₂BaAl₄SiO₁₂:Tb^(³⁺),Eu³⁺phosphors were syste matically analyzed with the help of X-ray diffraction(XRD),scanning electron microscopy(SEM),excitation spectra,emission spectra and photoluminescence decay curves.Tunable luminescence ranging from green through yellow and definitively to red can be achieved by elevating amounts of Eu³⁺ions in Tb³⁺,Eu³⁺co-doped samples.Besides,the ET mechanism and efficiency were also analyzed and the maximum ET efficiency is 67%.All the results show that Y₂BaAl₄SiO₁₂:Tb³⁺,Eu³⁺phosphors can be used in solid-state lighting.     

Preparation,structure, luminescence properties of europium doped zinc spinel structure green-emitting phosphor ZnAl2O4:Eu2+

The Zn_(1-x)Al_2 O_4:xEu~(2+) phosphor powders were synthesized by the solid-state reaction method.The synthesis temperature for ZnAl_2 O_4 was optimized,whereas the phase structure,TEM images,photoluminescence(PL) properties,the concentration quenching mechanism,the fluorescence decay curves,as well as the CIE chromaticity coordinates of the samples were investigated in details.Under the excitation at 379 nm,the phosphor exhibits an asymmetric broad-band green emission with a peak at 532 nm,which is ascribed to the 5 d-4 f transition of Eu2+.When the doping concentration of Eu2+ ions is 0.01,the luminescence intensity of the sample reaches the maximum value.It is further proved that the exchange interaction results in the concentration quenching of Eu2+ in the Zn_(1-x)Al_2 O_4:xEu~(2+) phosphor powders.The thermal quenching property of ZnAl_2 O_4:Eu~(2+)phosphor was investigated and the quantum efficiency(QE) values of the selected Zn_(0.99)Al_2 O_4:0.01 Eu~(2+) phosphor was measured and determined as 54.85%.The lifetime of the optimized sample Zn_(0.99)Al_2 O_4:0.01 Eu~(2+) is 3.0852 μs and the CIE coordinate of the sample was calculated as(0.3323,0.5538) with high-color-purity green emission.All properties indicate that the green-emitting ZnAl_2 O_4:Eu~(2+) phosphor powder has potential application in white LEDs.     

Upconversion multicolor tuning of NaY(WO4)2:Tb3+ with Eu3+ doping

A series of Tb~(3+) and Eu~(3+) co-doped NaY(WO_4)_2 phosphors were synthesized by hydrothermal reactions.The crystal structure,morphology,upconversion luminescent properties,the energy transfer from Tb~(3+) to Eu~(3+)ions and the ~5 D_4→ ~7 F_5 transition of the Tb~(3+) ion in NaY(WO_4)_2:Tb~(3+),Eu~(3+) phosphors were investigated in details.The results indicate that all the synthesized samples are of pure tetragonal phase NaY(WO_4)2.Furthermore,the micrometer-sized needle spheres and excellent dispersion of the particles are obtained by adding polyethylene glycol(PEG-2000) as the surfactant.Phosphors of NaY(WO_4)_2:Tb~(3+),Eu~(3+) exhibit the492 nm blue emission peak,546 nm green emission peak,595 nm orange emission peak and 616 nm red emission peak under 790 nm excitation.The energy transfer from Tb~(3+) to Eu~(3+) is a resonant transfer,in which electric dipole-dipole interaction plays a leading role.By adjusting the doping concentration of Eu~(3+) in NaY(WO_4)_2: 1.0 mol%Tb~(3+),xmol%Eu~(3+) phosphors,the emitting color of UC phosphors can be tuned from green to red.     

Luminescent and thermometric properties of dual emitting Eu~(2+)/Sm~(3+) co-doped Sr_4La(PO_4)_3O phosphor based on energy transfer

Eu²⁺/Sm³⁺co-doped dual-emitting Sr₄La(PO₄)₃O phosphors were synthesized through a convenient high temperature solid state reaction in reductive atmosphere.The structure,luminescence,energy transfer and temperature-dependent luminescence properties of Eu²⁺/Sm³⁺co-doped Sr₄La(PO₄)₃O phosphors were researched and analyzed in detail.The blue emission of Eu²⁺and the red emission of Sm³⁺can work together as FIR signals.Based on the different response characteristics of these two ion emissions to temperature,Sr₄La(PO₄)₃O:Eu²⁺/Sm^(³⁺)phosphor achieves the relative sensitivity of0.48384%/K and a wide range of temperature measurements from room temperature to 573 K.The results reveal that the Sr₄La(PO₄)₃O:Eu²⁺/Sm³⁺phosphor has application prospect in the field of high temperature optical thermometry.The energy transfer mechanism is proved to be the dipole-dipole interaction between Eu²⁺and Sm³⁺ions.     

A NIR to NIR rechargeable long persistent luminescence phosphor Ca2Ga2GeO7:Yb3+,Tb3+

Near infrared to near infrared (NIR–NIR) photo-stimulated persistent luminescence (PSPL) has shown excellent potential in high-resolution bioimaging for deep tissues. However, the PSPL in NIR-Ⅱ region (900–1700 nm) is still lacking. In this work, Ca₂Ga₂GeO₇:Yb³⁺,Tb³⁺ (CGGYT) phosphor with unique low-dimensional crystal structure was synthesized by high-temperature solid–state reaction. Thanks to the carriers transferring from deep traps to shallow ones induced by low energy light, the 978 nm PSPL originating from ²F_5/2 to ²F_7/2 transition of Yb³⁺ induced by multimode stimulating (980 nm or WLED) is successfully realized after pre-excited by UV lamp. The NIR PSPL of the specimen can be repeatedly stimulated after placed in dark for 12 h. Moreover, the results indicate that codoping with Tb³⁺ can significantly enhance the NIR-II PSPL owing to the quantum cutting persistent energy transfer (QC PET) from Tb³⁺ to Yb³⁺. Our study points to a new direction for the future development of multimode PSPL materials for bioimaging or multimode optical storage applications.