Preparation of aerochitin‐TiO2 composite for efficient photocatalytic degradation of methylene blue

An aerochitin–titania (TiO₂) composite was successfully synthesized and characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, field emission scanning electron microscopy, and N₂ adsorption isotherms. The photocatalytic activity of the composite was investigated on the degradation of the model organic pollutant, methylene blue (MB) dye, under UV irradiation. The aerochitin–TiO₂ composite showed excellent adsorptive and photocatalytic activity with a degradation degree of 98% for MB. The first‐order rate constants for the photodegradation MB by TiO₂ nanoparticles and aerochitin–TiO₂ composite were found to be (3.49 ± 0.04) × 10^?3 and (1.82 ± 0.02) × 10^?2 min^?1. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45908.     

Photodegradation of methylene blue with a titanium dioxide/polyacrylamide photocatalyst under sunlight

Hydrogels containing TiO₂ nanoparticles (NPs) have photocatalytic properties and degrade pollutants under light. In this study, a polyacrylamide (PAAm) hydrogel was synthesized with TiO₂ P25 NPs as the initiator, acrylamide as a monomer, and N,N′‐methylene bisacrylamide as a crosslinker in aqueous media under sunlight. Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy were applied to characterize the TiO₂/PAAm hydrogel. The effects of different synthetic conditions, such as the initiator concentration, crosslinker, and dilution, on swelling were investigated. The maximum swelling of the TiO₂/PAAm hydrogel was 45 g/g in the hydrogel synthesized with optimum conditions by 0.2% TiO₂. The photocatalytic degradability of the hydrogel was investigated with methylene blue (MB) as the pollutant target. Also, the effects of the pH and MB concentration were studied. Under optimum conditions, 95.00% of the MB was degraded by the TiO₂/PAAm photocatalyst after 5 h of irradiation under sunlight. The comparison of the results with those of the TiO₂ P25 powder showed that the TiO₂ NPs had better activity than the hydrogel, but unlike the hydrogel, the activity of these NPs decreased in each recycling time because of the aggregation of NPs. Finally, the hydrogel was recycled seven times without a considerable reduction in the degradation efficiency. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43386.     

Highly effective adsorption performance of carboxymethyl cellulose microspheres crosslinked with epichlorohydrin

Different sizes of epichlorohydrin‐crosslinked carboxymethyl cellulose (E/CMC) microspheres were successfully prepared by an inverse suspension method. With further modification by monochloroacetic acid (MCA), MCA–E/CMC microspheres were successfully synthesized. The structures and morphologies of these microspheres were analyzed with polarizing microscopy, scanning electron microscopy, ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller analysis, and laser particle ζ‐potential recording. The adsorption properties of the microspheres were investigated with methylene blue (MB) as a model pollutant. The highest adsorption amount of MB (998.2 mg/g) onto MCA–E_0.7/CMC which was the samples which treated with 0.7 mL of C₄H₉OH was obtained. Meanwhile, the effect of the operating parameters, such as the contact time, initial pH of the solution, temperature, and initial dye concentration, on the adsorption amount and MB removal were systematically studied. The results show that pseudo‐second‐order kinetic model provided the best correlation with the experimental data for the adsorption of MB onto the MCA–E_0.7/CMC microspheres. Both the physical and chemical adsorption played the main role in the adsorption process. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44363.     

Characterization and photodegradation characteristics of organic dye for Pt–titania combined multi-walled carbon nanotube composite catalysts

Multi-walled carbon nanotubes (MWCNTs), titanium(IV) isopropoxide (TIP) and potassium hexachloroplatinate(IV) (K₂PtCl₆) were used for the preparation of Pt/MWCNT/TiO₂ composites. The composites were comprehensively characterized by Brauer–Emett–Teller surface area, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive X-ray and UV–vis absorption spectroscopy. The photoactivity of the prepared materials under UV irradiation was tested using the conversion of methylene blue (MB) in aqueous solution. According to the results of MB removal experiment, it can be considered that the MB removal effect of the Pt/MWCNT/TiO₂ composites is affected by two kinds of effects: adsorption effect by MWCNTs and photocatalytic effect by TiO₂. Finally, the photocatalytic effect increases due to photo-induced-electron absorption effect by MWCNTs and electron trap effect by Pt metal.     

Preparation of cellulosic drug‐loaded hydrogel beads through electrostatic and host–guest interactions

Cyclodextrin‐grafted cellulosic hydrogel beads (CD⁺@HEC‐CMC‐gel) were prepared through electrostatic and host–guest interactions. β‐Cyclodextrin (CD⁺) modified with quaternary ammonium groups was used as the electropositive binding site, and carboxymethyl cellulose (CMC) in a double‐network hydrogel structure was used as the electronegative binding site. The double‐network structure was obtained by controlling the crosslinking of CMC and hydroxyethyl cellulose (HEC) in the presence of epichlorohydrin. The electrostatic interaction was used to graft CD⁺ onto the electronegative double‐network structure. Scanning electron microscopy indicated an obvious change in the cellulosic double network after grafting of CD⁺. The grafting content of CD⁺ in CD@HEC‐CMC‐gel is determined as 93.10 ± 0.74% by the photometric titration method. In order to evaluate the assembling and releasing ability, ibuprofen (IBU) was selected to be encapsulated in CD⁺@HEC‐CMC‐gel by host–guest interaction. In addition, the release of IBU by the hydrogel beads was explained by several kinetic models. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46593.     

Niobium‐Doped Titania Photocatalyst Film Prepared via a Nonaqueous Sol‐Gel Method

Niobium‐doped Titanium dioxide (Nb:TiO₂) transparent films were successfully deposited on glass substrates using a non‐aqueous sol‐gel spin coating technique. The effect of Nb concentration on the structural and photocatalytic properties of Nb:TiO₂ films was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV visible spectroscopy. The films with 12 at.% (atomic percent) Nb doped TiO₂ showed excellent photocatalytic activity through 97.3% degradation of methylene blue (MB) after 2 h of UV irradiation.     

Solar photocatalytic decolorization of dyes in solution with TiO2 film

Application of TiO₂ film to solar photocatalysis of organic dyes, including Methylene Blue (MB) (λ_max, 660 nm), RR195 (λ_max, 540 nm) and RY145 (λ_max, 420 nm), was investigated. It was found that after 6-h solar irradiation, the extent of color degradation of dyes using solar photocatalytic system without TiO₂ film was quite limited. The color removal percentage for MB, RR195, and RY145 was found to be 23.3, −9.3, and −20.7%, respectively, resulting from competitions between the photosensitizing reaction and formation of colored intermediates during solar irradiation. However, as TiO₂ film was applied, the color degradation capability of solar photocatalytic system was significantly improved, in spite of the fact that only approximately 7% of solar irradiation belongs to the UV region. The color removal percentage for MB, RR195, and RY145 was up to 93.6%, 85.3%, and 71.1%, respectively, after 6-h irradiation. We believed that in such a solar photocatalytic system immobilized with TiO₂ film, both the maximum absorbance wavelength of the dye and the adsorbability of the dye on TiO₂ film played significant roles on the rate and efficiency of color removal of the dye solutions. Moreover, the possible reaction mechanism was proposed. The solar photocatalytic process with immobilized TiO₂ film was found to follow the pseudo-first order reaction kinetics. Color removal rate of MB was almost twice of that of RY145. Accordingly, the photocatalytic degradation process using solar light as an irradiation source, and immobilized TiO₂ as a photocatalyst, showed potential application for the decolorization of wastewater.     

Construction of Z-scheme type CdS–Au–TiO2 hollow nanorod arrays with enhanced photocatalytic activity

The Z-scheme type CdS–Au–TiO₂ hollow nanorod arrays have been constructed on glass substrates by following these simple steps: firstly, highly ordered TiO₂ hollow nanorod arrays (THNAs) were synthesized by liquid phase deposition (LPD) using ZnO nanorod arrays as templates; then both Au core and CdS shell nanoparticles were achieved on the THNAs by in situ photodeposition. The prepared three-component films were characterized by field-emission scanning electron microscopy (FSEM), high-resolution transmission electron microscope (HRTEM), Raman scattering and ultraviolet–visible absorption spectrum. The results showed that Au–CdS core–shell nanoparticles were well dispersed on wall of anatase THNAs from top to bottom. The three-component nanojunction system was evaluated for their photocatalytic activity through the degradation of methylene blue (MB) in aqueous solution. It was found that the CdS–Au–TiO₂ three-component hollow nanorod arrays exhibited significantly enhanced photocatalytic activity compared with single (THNAs) and two components (Au-THNAs or CdS-THNAs) systems. Reasons for this enhanced photocatalytic activity were revealed by photoluminescence (PL) results of our samples.     

Synthesis of a montmorillonite‐supported titania nanocomposite with grafted cellulose as a template and its application in photocatalytic degradation

We report a study on the synthesis of anatase titania (TiO₂) particles with the sol–gel method at room temperature. We immobilized the particles on a grafted‐cellulose intercalated montmorillonite (MMT). This nanocomposite, cellulose‐g‐poly(4‐vinyl pyridine)/MMT/TiO₂, could be applied in the photocatalytic degradation of organic pollutants efficiently because of the addition of a sorbent, the grafted cellulose. The synthesized nanocomposite was characterized with Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. Methyl orange was used as a model molecule to study photocatalytic degradation. The nanocomposite exhibited a better photocatalytic activity than in the absence of the grafted cellulose. The kinetics of the photocatalytic degradation could be described by pseudo‐first‐order rate law. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42627.     

Effect of Fe<Superscript>3+</Superscript> doping on the performance of TiO<Subscript>2</Subscript> mechanocoated alumina bead photocatalysts

Ferric ion was introduced to the commercial photocatalyst P25 (Degussa) by ultrasonic wet impregnation technique. The concentration of the dopant was varied from 0.0 to 3.0% Fe/Ti ratio. The doped TiO₂ was then loaded to alumina balls using mechanical coating technique and followed by calcination in air at 400, 450, 500 and 550 °C. The fabricated photocatalyst was characterized by X-ray diffraction, N₂ adsorption-desorption isotherms, scanning electron microscopy, UV-Vis diffuse reflectance spectroscopy, X-ray adsorption near edge structure and photoluminescence spectroscopy. The photocatalytic activity was tested by following the degradation of methylene blue (MB). It was found that the Fe³⁺ doped TiO₂/Al₂O₃ has a combination of anatase and rutile phase and free of iron oxide phases. The optimum calcination temperature is 400 °C with 0.1% Fe³⁺ concentration. The catalyst addresses the entrainment in photocatalytic reactors, eliminating the need for a post filtration process.     

Effects of I and F codoped TiO2 on the photocatalytic degradation of methylene blue

Nanocrystalline I-F-codoped TiO₂ was prepared by a sol-gel-impregnation method, using tetrabutylorthotitanate in a mixed NH₄I-NH₄F aqueous solution. The as-prepared TiO₂ was characterized with UV-vis diffuse reflectance spectra, X-ray diffraction and nitrogen adsorption. The degradation of methylene blue (MB) over as-prepared TiO₂ in aqueous solution under simulated sunlight irradiation was remarkably enhanced by codoping with I and F. The effects of codoping and calcination temperature on the photocatalytic activity and microstructures were investigated. The photocatalytic activity of as-prepared I-F-codoped TiO₂ was remarkably higher than that of pure, I-doped, and F-doped TiO₂ when the molar ratios of I and F to Ti were kept in the value of 10. The influence of I-F-modification on the photocatalytic activity was discussed by considering the higher surface area, entire anatase phase, effective dopant content, and stronger absorbance of sunlight, corresponding to the higher quantum efficiency. In addition to a complete removal of color, the as-prepared TiO₂ was simultaneously able to oxidize MB and small amounts of intermediates such as formic acid and phenol were detected. After prolonged sunlight irradiation some intermediates almost vanished, and MB appeared to be eventually mineralized to NH₄⁺, NO₃⁻ and SO₄²⁻.     

The effects of growth conditions on the surface properties and photocatalytic activities of anatase TiO<Subscript>2</Subscript> films prepared via electrochemical anodizing and annealing methods

In the present work, nanostructured TiO₂ films were prepared by electrochemical anodization process of titanium in fluoride-containing electrolytes using an innovative approach. After anodization, the TiO₂ films were annealed at 480?°C for 2 h in air in order to acquire anatase phase transformation and increase its crystallinity. The effects of anodization voltage, electrolyte concentration and anodization time on the formation of TiO₂ films and the photocatalytic degradation of methylene blue (MB) were discussed in details. The phase structure and surface morphology of the samples characterized by means of X-ray diffraction and scanning electron microscope. The as-prepared nanostructured TiO₂ film anodized in 0.5% HF electrolyte at 15 V for 240 min showed excellent photocatalytic degradation of MB and is promising for environmental purification.     

Hydroxyethyl cellulose hydrogel modified with tannic acid as methylene blue adsorbent

This work developed an effective way to improve the methylene blue (MB) adsorption performance of cellulose-based hydrogel by modified with tannic acid (TA). HEC-co-p(AA-AM)/TA hydrogel was synthesized by grafting of acrylic acid (AA) and acrylamide (AM) onto hydroxyethyl cellulose (HEC), followed by modified with TA. Fourier transform infrared spectroscopy manifested that AA and AM were successfully grafted onto the hydrogel, and TA was immobilized in the hydrogel. Field emission scanning electron microscope demonstrated that the hydrogel after TA modification had a homogeneous pore structure. Brunauer-Emmett-Teller (BET) surface areas, total pore volume, and average pore diameters of the hydrogel are 11.821 m² g⁻¹, 0.0641 cm³ g⁻¹, and 2.538 nm, respectively. The high swelling ratio (1179.2 g g⁻¹ in deionized water) was in favor of the MB adsorption. The results of the adsorption experiments illustrated that HEC-co-p(AA/AM) hydrogel had excellent MB adsorption performance. As the pH increases, the electrostatic attraction is enhanced, and the adsorption capacity is improved. The adsorption process was more fit with pseudo-second-order kinetics, and the maximum adsorption capacity (3438.27 mg g⁻¹) was determined by Langmuir model. Thermodynamic studies suggested that the adsorption process is spontaneous, exothermic, and entropy reduction. X-ray photoelectron spectroscopy analysis confirmed that MB molecules were reacted with the oxygen atoms in hydroxyl and carboxyl groups by ion-exchange. High reusability demonstrated that the hydrogel could be a potential candidate for removal cationic dye from industrial effluents.     

Photocatalytic degradation of azo dye using TiO2 supported on spherical activated carbon

TiO₂ supported on spherical activated carbon (TiO₂/SAC) was prepared through an ion-exchange method followed by a heat-treatment process. The adsorption characteristic of TiO₂/SAC was evaluated using azo dye methyl orange (MO) as a target substance, and the photocatalytic degradation of MO under UV irradiation was also discussed. A synergistic effect of both the adsorption capacity of activated carbon and the photoactivity of TiO₂ on the removal of MO from aqueous solution was observed. Experimental results revealed that the photocatalytic degradation of MO improved with increasing photocatalyst dosage and followed a pseudo-first order kinetic. After five-cycle runs, TiO₂/SAC still exhibited relatively high photocatalytic characteristic for the degradation of MO. Besides, the prepared TiO₂/SAC can be helpful in the easy separation of photocatalyst from solution after photocatalysis of MO. Furthermore, the use of liquid chromatography/mass spectrometry (LC/MS) technique, identified three intermediates as degradation products during the photocatalytic reaction of MO with TiO₂/SAC.     

Effect of different Bi/Ti molar ratios on visible-light photocatalytic activity of BiOI/TiO2 heterostructured nanofibers

In this study, bismuth oxyiodide/titanium dioxide (BiOI/TiO₂) heterostructures with different molar ratios of Bi and Ti were synthesized by electrospinning and hydrothermal methods. The samples thus synthesized were characterized by powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy (TEM), high-resolution TEM, X-ray photoelectron spectroscopy, and ultraviolet–visible diffuse reflectance spectroscopy. The results confirmed the presence of the BiOI/TiO₂ heterojunction with Bi/Ti molar ratios of 0.20–1 by electrospinning and hydrothermal methods. Photocatalytic activity was also evaluated by the degradation of methylene blue (MB) under visible-light irradiation. The 80% BiOI/TiO₂ heterostructure exhibited the best photocatalytic activity for the degradation of MB under visible-light irradiation.     

Photocatalytic activities of electrospun tin oxide doped titanium dioxide nanofibers

SnO₂ doped TiO₂ electropsun nanofiber photocatalysts were successfully prepared by means of electrospinning process. The surface morphology, structure and optical properties of the resultant products were characterized by field-emission electron microscopy (FE-SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), UV–vis spectroscopy, photoluminescence (PL) and cathodoluminescence (CL) techniques. The utilized physiochemical analyses indicated that the introduced SnO₂ doped TiO₂ nanofibers have a smooth surface and uniform diameters along their lengths. The photocatalytic performance of the composite nanofibers was tested for degradation of methylene blue (MB) and methyl orange (MO) dye solution under ultraviolet (UV) irradiation. Under the UV irradiation, the photocatalytic reaction rate in case of utilizing SnO₂-doped TiO₂ nanofibers was rapidly increased than that of the pristine TiO₂ nanofibers. Overall, this study demonstrates cheap, stable and effective material for photocatalytic degradation at room temperature.     

Preparation and characterisation of silver‐ or copper‐doped TiO2 catalysts and their catalytic activity in dye degradation

In this study, silver‐ or copper‐doped TiO₂–Ce‐, TiO₂–La‐, and commercial TiO₂ (P25)‐supported catalysts were prepared. The catalysts and supports were characterised by powder X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and nitrogen adsorption studies. UV‐light‐assisted heterogeneous Fenton‐like oxidation of two different‐structure dyes (anionic azo dye Orange II, CI Acid Orange 7 and cationic triphenylmethane dye Crystal Violet, CI Basic Violet 3) was investigated over the catalysts. Higher catalytic activity was observed in the oxidation of Orange II than in the oxidation of Crystal Violet. For both dyes, the TiO₂–Ce and TiO₂–La‐supported catalysts, which were in the form of anatase only, gave higher photocatalytic activity than the P25‐supported catalysts, which were in the form of anatase and rutile. Complete colour removal was observed during oxidation of Orange II over Cu/TiO₂–Ce and Cu/TiO₂–La catalysts, whereas the highest degree of decolorisation, 89.3%, was achieved by oxidation of Crystal Violet over Ag/TiO₂–Ce. The pH of the solution affected the surface state of the TiO₂, thus affecting the photocatalytic degradation of the dyes. The surface area of the catalysts is also a key parameter that influences their photocatalytic activity. It was observed that catalysts having higher surface areas brought about greater dye degradation.     

Simultaneously efficient adsorption and photocatalytic degradation of sodium dodecyl sulfate surfactant by one-pot synthesized TiO2/layered double hydroxide materials

The large amount of surfactants discharge into wastewater are harmful for both terrestrial and aquatic life; in fact the removal of surfactants from wastewater becomes necessary. The present study is focused on to the removal of sodium dodecyl sulphate surfactant (SDS) by adsorption and photocatalytic degradation using Zn(2)Al-LDH and TiO₂/Zn(2)Al-LDH materials synthesized by co-precipitation. The experimental adsorption data obtained were evaluated using Langmuir Freundlich and Temkin isotherms models. The photocatalytic degradation activities of SDS at different concentration in the range of (10?100 mg/L) over Zn(2)Al-LDH and TiO₂/Zn(2)Al-LDH follows the pseudo first-order kinetics in accordance with the Langmuir Hinshelwood model. The results indicated that TiO₂(3.6)/Zn(2)Al-LDH show the highest photocatalytic activity compared to Zn(2)Al-LDH sample.     

Cellulose reinforced-TiO<Subscript>2</Subscript> photocatalyst coating on acrylic plastic for degradation of reactive dyes

In this study, cellulose reinforced-TiO₂ (C-T) film was coated on acrylic plastic sheet and used for UV photocatalytic degradation of four reactive dyes viz., Reactive Black 5, Reactive Red 11, Reactive Orange 16, and Reactive Red 2 in a falling film reactor (FFR). Slurry comprising cellulose and TiO₂ in suitable weight proportions (5, 10, 15, and 25 wt% cellulose) was prepared and a C-T film was obtained by brush coating on acrylic plastic sheet. The composition yielding adherent film and efficient for the dye degradation was identified. The effect of hydraulic flow rate and solution pH on the stability of the C-T films was also investigated. The photocatalytic coating containing 15 wt% cellulose was found to be adherent and efficient for dye degradation. The photodegradation of the reactive dyes, monitored in terms of decolorization (>80%), and reduction in total organic carbon (TOC) during 5 h followed pseudo first-order kinetics. The mineralization efficiency at 5 h treatment using 15 wt% C-T coating was in the range 75.4–83.3% for all the dyes. On the basis of optical microscopy images, the stability of the C-T films obtained from 15 wt% cellulose was attributed to the interlacing of the cellulose fibers that reinforced the TiO₂ coating.