Surface coated iron particles via atom transfer radical polymerization for thermal–oxidatively stable high viscosity magnetorheological fluid

A surface grafting technique for poly(2‐fluorostyrene) onto iron particles via atom transfer radical polymerization (ATRP) is described. Grafted poly(2‐fluorostyrene)–iron particles were synthesized by immobilizing 2‐4(‐chlorosulfonylphenyl)‐ethyltrichlorosilane to the iron particles through the covalent bond of a silanol group, followed by the polymerization of 2‐fluorostyrene monomer. The grafted polymer–iron particles display a higher thermal transition temperature compared to bulk polymer because the covalent bond between the polymer backbone and the surface of the iron particles restricts the molecular mobility. The molecular weight of the synthesized poly(2‐fluorostyrene) has been measured and it has a narrow molecular weight distribution (M_w/M_n < 1.1). From thermogravimetric analysis, the thermal stability of poly(2‐fluorostyrene) is superior to polystyrene. Also, the high viscosity magnetorheological fluid (HVMRF) prepared from surface coated iron particles has excellent thermo–oxidative stability, having nearly constant viscosity. These materials exhibit a large increase in shear yield stress for the off‐ and on‐state as compared to a benchmark high viscosity magnetorheological fluid (HVMRF) and ‐coated iron particle HVMRF. In addition, this type of fluid eliminates iron particle settling which is a common problem found in traditional magnetorheological fluids (MRFs). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(N-isopropylacrylamide) hydrogels with improved shrinking kinetics by RAFT polymerization

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of N-isopropylacrylamide (NIPAM) in the presence of N,N-methylenebisacylamide (BIS) as a cross-linker and 4-cyanopentanoic acid dithiobenzoate as chain transfer reagent (CTA). The swelling behaviors were investigated and the hydrogels by RAFT polymerization (RAFT gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains mainly caused by CTA, which could retard the crosslinking reaction rate greatly. Another CTA, 3-(trithiocarbonyl) propanoic acid, was adopted to further investigate the effect of CTA. It showed the similar effect except the different accelerated degree to the shrinking kinetics. Furthermore, the living character of the RAFT process was used to polymerize a new batch of monomer (NIPAM) from functional RAFT gels to introduce grafted structure. The PNIPAM-g-PNIPAM hydrogels indicted further accelerated shrinking kinetics than functional backbone hydrogels.     

Reversible addition-fragmentation chain transfer polymerization of 7-(4-(acryloyloxy)butoxy)coumarin

The light sensitive vinyl monomer with coumarin unit, 7-(4-(acryloyloxy)butoxy)coumarin (7AC), was synthesized. The reversible addition-fragmentation chain transfer (RAFT) polymerization of 7AC, initiated by 2,2′-azobisisobutyronitrile (AIBN), was carried out using 2-cyanoprop-2-yl dithiobenzoate (CPDB) as a RAFT agent in N,N-dimethylformamide (DMF) solution. The kinetics exhibited first-order relationship with respect to the monomer concentration. The molecular weight of the polymer increased linearly with the monomer conversion. The chain extension of poly(7-(4-(acryloyloxy)butoxy)coumarin) (P7AC) using styrene (St) as the second monomer demonstrated that the obtained polymers were almost “living”. The fluorescence intensity of P7AC increased with the molecular weight of P7AC and was stronger than that of the monomer. The obtained polymer had strong ultraviolet (UV) absorption at 322 nm. The molecular weights of the polymer had no effect on its ultraviolet absorption intensity. The coumarin structure existing in P7AC underwent [2 + 2] cycloaddition reaction (photodimerization) under UV irradiation in tetrahydrofuran (THF) solution, which can be further used to prepare small particles from the single polymer.     

Controlled synthesis of vinyl-functionalized homopolymers and block copolymers by RAFT polymerization of vinyl methacrylate

Reversible addition-fragmentation chain transfer (RAFT) polymerization of an asymmetrical divinyl monomer, vinyl methacrylate (VMA), was investigated under various conditions. RAFT polymerization of VMA using a dithioester-type chain transfer agent (CTA) under suitable conditions afforded soluble polymers with a high content of pendant vinyl ester side chains in sufficient yields (>70%). The monomer concentration, the nature of the CTA, and the CTA/initiator ratio were found to affect the polymerization reaction and the structure of the resulting polymers; this behavior is attributed to the relative propensities for intermolecular propagating/cross-linking reactions and intramolecular cyclization. A kinetic study of the RAFT polymerization of VMA with the dithioester-type CTA 1 suggested that the propagation reaction of the methacryloyl group proceeded predominantly with a certain level of intramolecular cyclization during the early stage of the polymerization and intermolecular cross-linking during the final stage of the polymerization. Block copolymers with one segment featuring pendant vinyl functionality were synthesized by RAFT polymerization of VMA using poly(methyl methacrylate) as a macro-chain transfer agent (macro-CTA).     

RAFT‐mediated graft polymerization of glycidyl methacrylate in emulsion from polyethylene/polypropylene initiated with γ‐radiation

The successful reversible addition‐fragmentation (RAFT)‐mediated graft polymerization of glycidyl methacrylate (GMA) in emulsion phase from polyethylene/polypropylene nonwoven fabric using 4‐cyano‐4‐[(phenylcarbonothioyl)thio]pentanoic acid under γ‐irradiation at ambient condition is reported. While conventional graft polymerization in emulsion phase yielded grafted materials with low of grafting (Dg) values [<7.5% at 10% (wt/wt) GMA], addition of RAFT agent to the graft polymerization system allowed the synthesis of polyethylene/polypropylene‐g‐poly(GMA) with more tunable Dg (8% ≤ Dg ≤ 94%) by controlling the grafting parameters. Relatively good control (PDI ～1.2 for selected grafting conditions) during polymerization was attained at 100:1 monomer‐to‐RAFT agent molar ratio. The number average molecular weight of free poly(glycidyl methacrylate) (PGMA) increased as a function of monomer conversion. NMR analyses of the free PGMA homopolymers indicate the presence of dithiobenzoate group from 4‐cyano‐4‐((phenylcarbonothioyl)thio) pentanoic acid on the polymer chain. The reactive pendant oxirane group of the grafted GMA can be modified for various environmental and industrial applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45270.     

Controlled grafting of poly(vinyl acetate) onto starch via RAFT polymerization

A structure‐exact starch‐based xanthate agent was prepared and used as chain transfer agent to mediate RAFT polymerization of vinyl acetate, which offered a convenient way to well control the structure and composition of starch‐g‐poly(vinyl acetate). The structures of the intermediate and the polymer were verified with FTIR and ¹H‐NMR. Gel permeation chromatography measurement results indicated that the polymerization was performed as expected. It was found that the relationship between number average molecular weight and monomer conversion was linear. The polydispersity index of grafted side‐chain ranged from 1.19 to 1.53 and most of them were around 1.2. There was one more degradation stage appeared on the thermogravimetric analysis profile of starch‐g‐poly(vinyl acetate) than that of starch. TEM observation exhibited that the product was able to self‐assemble into micelles in aqueous solution, which suggested the copolymer was amphiphilic. Both the thermal and amphiphilic properties demonstrated the starch‐g‐poly(vinyl acetate) was successfully synthesized as well. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and kinetic characterization of attapulgite grafted with poly(methyl methacrylate) via R-supported RAFT polymerization

Poly(methyl methacrylate) brushes grafted from attapulgite nanoparticles (ATP@PMMA) were prepared by R-Supported reversible addition-fragmentation chain transfer polymerization (RAFT). ATP was firstly activated, and allowed to react with γ-aminopropyltriethoxysilane (APTES), 4,4′-azobis(4-cyanovaleric acid) (ACVA) and bis(thiobenzoyl) disulfide stepwise to afford 4-cyanopentanoic acid dithiobenzoate functionalized ATP (ATP-CPADB). Then, RAFT polymerizations of MMA mediated by the different systems were conducted and compared systemically. The grafting process was verified by FTIR, XRD, XPS, TGA and TEM data. Kinetic behavior indicated that the anchored CPADB is more effective before diffusing into the bulk phase. The grafting ratio (G _r), while M _n of grafted and free polymer increased linearly with increasing monomer conversion in presence of free CPADB, giving the hybrid particles with more homogeneous distribution of grafted polymer layer.     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A graphene oxide-based molecularly imprinted polymer platform for detecting endocrine disrupting chemicals

A molecularly imprinted polymer-graphene oxide (MIP-GO) hybrid material was synthesized by reversible addition and fragmentation chain transfer (RAFT) polymerization using RAFT agent functionalized GO as chain transfer agent. The formation of this hybrid material was verified by Raman spectroscopy, Fourier transform infrared spectroscopy, and thermal gravimetric analysis. Atomic force microscopy showed that the average thickness of the polymer grafted on the GO surface is about 3.70 nm. The resulting GO-MIP hybrids showed outstanding affinity towards 2,4-dichlorophenol (2,4-DCP) in aqueous solution. The GO-MIP hybrids bind the original template 2,4-DCP with an appreciable selectivity over structurally related compounds. Density functional theory calculations verified the mechanism of the significant improvements on the affinity and selectivity of the MIP-functionalized graphene materials.     

Synthesis of well-defined poly( n -vinylpyrrolidone)/n-TiO 2 nanocomposites by xanthate-mediated radical polymerization

For the first time formation of well-defined poly n-vinylpyrrolidone/n-TiO2 nanocomposite by xanthate-mediated radical polymerization was accomplished. The synthesis of polymer nanocomposite materials has been intensively studied due to their extraordinary properties and wide-spread potential applications. For this purpose, first 2‐propionic acid-O-ethyl xanthate, as a RAFT agent, was synthesized by the reaction of 2-bromopropionic acid with potassium O-ethyl xanthate with acetone as the solvent. A carboxylic group in the RAFT agent was attached to the n-TiO2 surface by metalation reaction. Then, RAFT polymerization of n-vinylpyrrolidone (NVP) was subsequently conducted to graft poly(n-vinylpyrrolidone) (PNVP) onto the exterior surface of n-TiO2 nanoparticles, forming a novel core–shell nanostructure with a mesoporous core and a polymeric nanoshell. The viscosimetry data and 1H NMR spectra were used to calculate the molecular weight of the polymer. The obtained results showed a good agreement withthe methods used. A significant enhancement in the stability of the composites was obtained as demonstrated by the TGA results. The SEM and TEM results showed that the polymer was formed on the surface of the particles. The XRD pattern of the nanoparticles of n-TiO2 presented the amorphous structure of the crystal morphology of the composites. The FTIR and UV–visible spectroscopy results proved that the PNVP chains were grafted onto the n-TiO2 nanoparticles by surface RAFT polymerization.     

Controlled synthesis of sulfonated block copolymers having thermoresponsive property by RAFT polymerization of vinyl sulfonate esters

Four vinyl sulfonate ester derivatives, methyl ethenesulfonate (MES), ethyl ethenesulfonate (EES), 2,2,2-trifluoroethyl ethenesulfonate (TFES), and 2,2,2-trichloroethyl ethenesulfonate (TCLES), which are protected forms of vinyl sulfonic acids, were polymerized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Polymers having relatively narrow molecular weight distributions and pre-determined molecular weights were obtained by the polymerization of all monomers using a suitable xanthate-type chain transfer agent (CTA). The RAFT polymerizations of EES and TCLES were found to proceed in controlled fashions under suitable conditions, as confirmed by the formation of narrow polydispersity products, molecular weights controlled by the monomer/chain transfer agent ratio, and linear increases in molecular weight with conversion. Deprotection of the ethyl group of poly(EES) by LiBr in refluxing 2-butanone proceeded smoothly to give water-soluble poly(lithium vinyl sulfonate). Poly(potassium vinyl sulfonate) was also obtained by the deprotection of poly(TCLES) using potassium tert-butoxide. The syntheses of thermoresponsive block copolymers involving poly(lithium vinyl sulfonate) segments were conducted by RAFT polymerization of N-isopropylacrylamide using poly(EES) macro-CTA, followed by deprotection. The thermally-induced phase separation behavior and assembled structures of the block copolymers were also studied in aqueous solution.     

Grafting modification of ramie fibers with poly(2,2,2-trifluoroethyl methacrylate) via reversible addition–fragmentation chain transfer (RAFT) polymerization in supercritical carbon dioxide

Reversible addition–fragmentation chain transfer (RAFT) polymerization was used to control the grafting of 2,2,2-trifluoroethyl methacrylate (TFEMA) with ramie fibers in supercritical carbon dioxide (scCO₂). The hydroxyl groups of the ramie fibers were converted to 2-dithiobenzoyl isobutyrate as the RAFT chain transfer agent (cellulose-CTA). Then, the subsequent grafting with TFEMA was mediated by RAFT polymerization in the presence of 2-(ethoxycarbonyl)prop-2-yl dithiobenzoate (ECPDB) as the free RAFT chain transfer agent (free CTA). The modified ramie fibers were highly hydrophobic with water contact angles of up to 149°. Size exclusion chromatography showed narrow polydispersity (PDI = 1.28) of the grafted poly(TFEMA) chains. This grafting polymerization process is a novel and environmentally friendly approach for the preparation of functional grafted copolymers utilizing ramie fiber biomass.     

通过RAFT聚合制备经GMA偶联的PMMA/TiO2杂化纳米复合物

利用表面修饰法合成了常用单体甲基丙烯酸缩水甘油酯(GMA)修饰的TiO2纳米粒子。以甲基丙烯酸甲酯(MMA)为单体,S-1-十二烷基-S′-(α,α′-二甲基-α″-乙酸)三硫代碳酸酯(DDACT)为RAFT试剂,在纳米TiO2表面进行可逆加成-断裂链转移(RAFT)接枝聚合,PMMA"经表面接枝到(grafting through)"改性后的纳米TiO2表面。结果表明,随聚合时间的增加,纳米TiO2表面接枝聚合物PMMA的量增加,颗粒的团聚得到明显减缓。     

可逆加成-断裂链转移聚合制备聚氯乙烯-b-聚乙二醇-b-聚氯乙烯共聚物

合成了含黄原酸酯端基的聚乙二醇（X-PEG-X）大分子链转移剂,并以其为可逆加成-断裂链转移试剂调控氯乙烯（VC）溶液和悬浮聚合,合成聚氯乙烯-b-聚乙二醇-b-聚氯乙烯（PVC-b-PEG-b-PVC）三嵌段共聚物。X-PEG-X调控VC溶液聚合得到的共聚物的分子量随聚合时间增加而增大,分子量分布指数小于1.65。X-PEG-X具有水/油两相分配和可显著降低水/油界面张力的特性,以X-PEG-X为链转移剂和分散剂,通过自稳定悬浮聚合也可合成PVC-b-PEG-b-PVC共聚物,共聚物颗粒无皮膜结构,分子量随聚合时间增加而增大;由于VC悬浮聚合具有聚合物富相和单体富相两相聚合特性,共聚物分子量分布指数略大于溶液聚合共聚物。通过乙酸乙烯酯（VAc）扩链反应进一步证实了PVC-b-PEG-b-PVC的“活性”,并合成PVAc-b-PVC-b-PEG-b-PVC-b-PVAc共聚物。水接触角测试表明PVC-b-PEG-b-PVC的亲水性优于PVC。     

(S)-2-(Ethyl propionate)-(O-ethyl xanthate) and (S)-2-(Ethyl isobutyrate)-(O-ethyl xanthate)-mediated RAFT polymerization of N-vinylpyrrolidone

(S)-2-(Ethyl propionate)-(O-ethyl xanthate) (X1) and the newly synthesized (S)-2-(ethyl isobutyrate)-(O-ethyl xanthate) (X2) were used as the reversible addition-fragmentation chain transfer (RAFT) agents for the radical polymerization of N-vinylpyrrolidone (NVP). The former showed the better chain transfer ability in the polymerization at 60 °C. Kinetics study with X1 shows the psuedo-first order kinetics upto 45% monomer conversion. Molecular weight (M _n) of the resulted polymer increases linearly with increase in the monomer conversion upto around 45%. Polydispersity of the corresponding poly(NVP)s increase gradually from 1.2 to 1.9 with increase in the monomer conversion. Chain-end analysis of the resulted polymer by ¹H NMR shows clearly that polymerization started with radical forming out of xanthate mediator. Living nature of the polymerization was confirmed from the successful homo chain extension experiment and also the hetero-chain extension experiment involving synthesis of poly(NVP)-b-polystyrene amphiphilic diblock copolymer.     

聚丙烯酸-b-聚丙烯酸丁酯的RAFT水溶液聚合及其性能

该研究首先以2-{[(十二烷基硫基)硫代甲酰基]硫烷基}琥珀酸为链转移剂(CTA)在水溶液中调控丙烯酸(AA)进行可逆加成-断裂链转移自由基聚合(RAFT),再以得到的聚丙烯酸为大分子RAFT试剂,丙烯酸正丁酯(BA)为单体,进行扩链反应,得到聚丙烯酸-b-聚丙烯酸正丁酯。用红外光谱对产物结构进行了表征。考察了合成条件n(V501)/n(CTA)、n(AA)/n(CTA)、n(V501)/n(PAA-RAFT)、n(BA)/n(PAA-RAFT)对聚合物的表面张力、乳化性、起泡性和泡沫稳定性的影响。结果表明,当n(V501)/n(CTA)=0.2、n(AA)/n(CTA)=20、n(V501)/n(PAA-RAFT)=0.1、n(BA)/n(PAA-RAFT)=20时,得到的聚丙烯酸-b-聚丙烯酸正丁酯的水溶液表面活性最大,表面张力最低为30.89 N/m,乳化性最强,乳状液稳定时间达到1 082 s,起泡性和泡沫稳定性最弱,泡沫高度为17.01 mm,稳定时间为210 s。     

Ibuprofen‐imprinted ultrathin poly[N‐(2‐hydroxypropyl) methacrylamide] films

Surface molecularly imprinted (MIP) poly[N‐(2‐hydroxypropyl) methacrylamide] [poly(HPMA)] films were prepared via interface‐mediated reversible addition‐fragmentation chain transfer (RAFT) polymerization from 4‐cyano‐4‐(propylsulfanylthiocarbonyl) sulfanyl pentanoic acid immobilized silicon substrate using N‐(2‐hydroxypropyl) methacrylamide as the functional monomer, N,N′‐methylene(bis)acrylamide as the crosslinking agent, and ibuprofen as the template molecule. The highly crosslinked MIP layer (～12 nm) was homogeneously grafted onto the silicon surface, which favors fast mass transfer and rapid binding kinetics. Binding capacities and adsorption parameters of the MIP poly(HPMA) films were calculated from the root‐mean‐square roughness data obtained by atomic force microscopy measurements using the Luzinov and Langmuir equations adopted for this study. The target binding assays demonstrate the desirable binding capacity and imprinting efficiency of the MIP poly(HPMA) films. Meanwhile, the computational optimization and energy calculations showed the formation of the self‐assembly of monomer and template molecule via noncovalent interactions that leads to a 1:4 molecular complex between ibuprofen and N‐(2‐hydroxypropyl) methacrylamide. This study provides a versatile approach to the quantitative determination of low‐molecular‐weight biomolecules on surface‐imprinted polymers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45707.     

One-pot synthesis of poly(methacrylic acid)-b-poly(2,2,2-trifluoroethyl methacrylate) diblock copolymers via RAFT polymerization

In this work, the reversible addition-fragmentation chain transfer (RAFT) polymerization was utilized to synthesize the amphiphilic diblock copolymers of poly(methacrylic acid)-b-poly(2,2,2-trifluoroethyl methacrylate) (PMAA-b-PTFEMA) via one-pot two-step reaction protocol. The controlled radical polymerization of MAA monomer was first carried out in pure water by using 4-cyanopentanoic acid dithiobenzoate (CADB) as chain transfer agent. Subsequently, the as-synthesized PMAA homopolymers with dithiobenzoate end-groups were employed as macro-CTA and chain-extended in situ with the hydrophobic TFEMA monomer. The reactions were carried out in 1,4-dioxane/water medium. Both the polymerization of PMAA and PTFEMA blocks showed the well controllability on the molecular weighs and distributions. It was found that the amphiphilic diblock copolymers formed the stable spherical particles via the polymerization-induced self-assembly. Meanwhile, the effect of various parameters, such as the concentration ratio of TFEMA monomer over PMAA macro-CTA, the solvent condition (different ratio of 1,4-dixane/water), and the pH, on the RAFT polymerization of TFEMA monomer were investigated in detail. Their kinetic results suggested that the propagation of TFEMA monomer on the macro-CTA was performed at the particle/water interfaces. The concentration of chain transfer agents at the interfaces determined the polymerization rate. Finally, the stability of the fluorinated polymer dispersions was also evaluated in this work.     

Surface-initiated atom transfer radical polymerization of polyhedral oligomeric silsesquioxane (POSS) methacrylate from flat silicon wafer

A polyhedral oligomeric silsesquioxane (POSS) methacrylate monomer, i.e. 3-(3,5,7,9,11,13,15-heptacyclopentyl-pentacyclo [9.5.1.1.^3,91.^5,151^7,13]-octasiloxane-1-yl) propyl methacrylate (POSS-MA), was directly grafted from flat silicon wafers using surface-initiated atom transfer radical polymerization (ATRP). Two methods were used to improve the system livingness and control of polymer molecular weights. By ‘adding free initiator’ method, a linear relationship between the grafted poly(POSS-MA) layer thickness and monomer conversion was observed. By ‘adding deactivator’ method, the poly(POSS-MA) thickness increased linearly with reaction time. Poly(POSS-MA) layers up to 40 nm were obtained. The chemical compositions measured by X-ray photoelectron spectroscopy (XPS) agreed well with their theoretical values. Water contact angle measurements revealed that the grafted poly(POSS-MA) was extremely hydrophobic. The surface morphologies of the grafted polymer layers were studied by an atom force microscopy (AFM).     

The direct polymerization of 2-methacryloxyethyl glucoside via aqueous reversible addition-fragmentation chain transfer (RAFT) polymerization

A preliminary study on the direct controlled radical polymerization of a glycomonomer, namely 2-methacryloxyethyl glucoside (MAGlu), under reversible addition-fragmentation chain transfer (RAFT) polymerization conditions in aqueous media has been conducted. This represents the first example detailing the direct polymerization of a sugar monomer via RAFT and, significantly, has been conducted without protecting group chemistry. 4-Cyano-4-methyl-4-thiobenzoylsulfanyl butyric acid (CTP) was employed as the RAFT chain transfer agent (CTA) due to its inherent water-solubility and its applicability for methacrylic monomers. The homopolymerization displays all the characteristics of a controlled/‘living’ polymerization—linear increase in M_n with conversion, pseudo-first order kinetics, the final polymers have narrow molecular distributions and novel block copolymers can be prepared.