Functionalized liquid natural rubber and liquid epoxidized natural rubber: A promising green toughening agent for polyester

Toughened unsaturated polyester resins (UPRs) were prepared using two different reactive rubbers, namely, liquid natural rubber (LNR) and liquid epoxidized natural rubber (LENR). The effect of varying amounts of LNR and LENR on the morphology, thermal, and mechanical properties of UPR were evaluated. Fourier Transform Infrared spectroscopy was used to investigate the probable crosslinking reaction and changes in the functional groups on crosslinking. Field emission scanning electron microscopy and infinite focus microscopy were used to study the morphology of fracture surfaces. Tensile test showed that both the rubber‐modified resins (1.5 wt %) improved tensile strength. The viscoelastic properties and thermal stability of the toughened polyesters were evaluated using dynamic mechanical thermal analysis and thermogravimetric analysis, respectively. A slight reduction in the glass transition temperature (T_g) of the polyester was reported on the addition of both the rubbers. An increment in impact strength and fracture toughness was observed at 1.5 wt % for LNR and 4.5 wt % for LENR‐modified UPR. The results showed that both the liquid rubbers improved the mechanical properties of UPR. However, LENR‐modified UPR exhibited a more significant improvement in the mechanical properties compared to LNR‐modified UPR. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41292.     

Epoxidized natural rubber/epoxy blends: Phase morphology and thermomechanical properties

Epoxidized natural rubbers (ENRs) were prepared. ENRs with different concentrations of up to 20 wt % were used as modifiers for epoxy resin. The epoxy monomer was cured with nadic methyl anhydride as a hardener in the presence of N,N‐dimethyl benzyl amine as an accelerator. The addition of ENR to an anhydride hardener/epoxy monomer mixture gave rise to the formation of a phase‐separated structure consisting of rubber domains dispersed in the epoxy‐rich phase. The particle size increased with increasing ENR content. The phase separation was investigated by scanning electron microscopy and dynamic mechanical analysis. The viscoelastic behavior of the liquid‐rubber‐modified epoxy resin was also evaluated with dynamic mechanical analysis. The storage moduli, loss moduli, and tan δ values were determined for the blends of the epoxy resin with ENR. The effect of the addition of rubber on the glass‐transition temperature of the epoxy matrix was followed. The thermal stability of the ENR‐modified epoxy resin was studied with thermogravimetric analysis. Parameters such as the onset of degradation, maximum degradation temperature, and final degradation were not affected by the addition of ENR. The mechanical properties of the liquid‐natural‐rubber‐modified epoxy resin were measured in terms of the fracture toughness and impact strength. The maximum impact strength and fracture toughness were observed with 10 wt % ENR modified epoxy blends. Various toughening mechanisms responsible for the enhancement in toughness of the diglycidyl ether of the bisphenol A/ENR blends were investigated. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39906.     

Toughening of epoxy hybrid nanocomposites modified with silica nanoparticles and epoxidized natural rubber

Silica nanoparticles (SN) and epoxidized natural rubber (ENR) were used as binary component fillers in toughening diglycidyl ether of bisphenol A (DGEBA) cured cycloaliphatic polyamine. For a single component filler system, the addition of ENR resulted in significantly improved fracture toughness (K_IC) but reduction of glass transition temperature (T_g) and modulus of epoxy resins. On the other hand, the addition of SN resulted in a modest increase in toughness and T_g but significant improvement in modulus. Combining and balancing both fillers in hybrid ENR/SN/epoxy systems exhibited improvements in the Young’s modulus and T_g, and most importantly the K_IC, which can be explained by synergistic impact from the inherent characteristics associated with each filler. The highest K_IC was achieved with addition of small amounts of SN (5 wt.%) to the epoxy containing 5–7.5 wt.% ENR, where the K_IC was distinctly higher than with the epoxy containing ENR alone at the same total filler content. Evidence through scanning electron microscopy (SEM) and transmission optical microscopy (TOM) revealed that cavitation of rubber particles with matrix shear yielding and particle debonding with subsequent void growth of silica nanoparticles were the main toughening mechanisms for the toughness improvements for epoxy. The fracture toughness enhancement for hybrid nanocomposites involved an increase in damage zone size in epoxy matrix due to the presence of ENR and SN, which led to dissipating more energy near the crack-tip region.     

Mechanical properties,oil resistance,and thermal aging properties in chlorinated polyethylene/natural rubber blends

The use of natural rubber (NR) for partly substituting elastomeric chlorinated polyethylene (CPE) was determined. Mechanical and thermal aging properties as well as oil resistance of the blends were also investigated. The amount of NR in blends significantly affected the properties of the blends. The blends with NR content up to 50 wt % possessed similar tensile strength to that of pure CPE even after oil immersion or thermal aging. Modulus and hardness of the blends appeared to decrease progressively with increasing NR content. These properties also decreased in blends after thermal aging. After oil immersion, hardness decreased significantly for the blends with high NR content, whereas no change in modulus was observed. The dynamic mechanical properties were determined by dynamic mechanical thermal analysis. NR and CPE showed damping peaks at about ?40 and 4 °c, respectively; these values correlate with the glass‐transition temperatures (T_g) of NR and CPE, respectively. The shift in the T_g values was observed after blending, suggesting an interfacial interaction between the two phases probably caused by the co‐vulcanization in CPE/NR blends. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 22–28, 2002; DOI 10.1002/app.10171     

Toughening of thermoset green zein resin: A comparison between natural rubber-based additives and plasticizers

Zein-based brittle thermoset green resin was toughened using sorbitol, natural rubber fibers (NRF), and epoxidized natural rubber fibers (ENRF). NRF and ENRF were electrospun directly into zein slurry. Chemical, thermal, and mechanical properties of zein resin containing NRF (Zein/NRF) and ENRF (Zein/ENRF) were compared with those of sorbitol-plasticized zein. NRF was found to be immiscible in zein and Zein/NRF resins showed two distinct glass transition temperatures (T _g), whereas Zein/ENRF specimens showed significant increases in both T _g and degradation temperature (T _d) due to crosslinking between zein and epoxidized natural rubber. ENRF was more effective in enhancing fracture toughness of zein than NRF or sorbitol. Increased ENRF loading to 15 wt % showed significant increase in toughness with minimal decreases in strength and Young's modulus. Sorbitol and NRF were unable to improve the toughness of zein resin significantly. Environment-friendly zein/ENRF resin with higher fracture toughness developed in this study would be suitable in many applications including green composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48512.     

Thermomechanical properties and shape memory effect of epoxidized natural rubber crosslinked by 3‐amino‐1,2,4‐triazole

A thermally induced shape memory polymer based on epoxidized natural rubber (ENR) was produced by curing the ENR with 3‐amino‐1,2,4‐triazole as a crosslinker in the presence of bisphenol‐A as a catalyst. Dynamic mechanical and tensile analysis was conducted to examine the variation of glass transition temperature, stiffness, and extensibility of the vulcanizates with the amount of curatives. Shape memory properties of the ENR vulcanizates were characterized by shape retention and shape recovery. It was revealed that the glass transition temperature of the ENR vulcanizates could be tuned well above room temperature by increasing the amount of curing agents. Also, ENR vulcanizates with T_g higher than ambient temperature showed good shape memory effects under 100% elongation, and the response temperatures of the recovery were well matched with T_g of the samples. Copyright © 2006 Society of Chemical Industry     

ABS modified with hydrogenated polystyrene‐grafted‐natural rubber

Natural rubber (NR) latex was grafted by emulsion polymerization with styrene monomer, using cumene hydroperoxide/tetraethylene pentamene as redox initiator system. The polystyrene‐grafted NR (PS‐g‐NR) was hydrogenated by diimide reduction in the latex form using hydrazine and hydrogen peroxide with boric acid as a promoter. At the optimum condition for graft copolymerization, a grafting efficiency of 81.5% was obtained. In addition, the highest hydrogenation level of 47.2% was achieved using a hydrazine:hydrogen peroxide molar ratio of 1:1.1. Hydrogenation of the PS‐g‐NR (H(PS‐g‐NR)) increased the thermal stability. Transmission electron microscopy analysis of the H(PS‐g‐NR) particles revealed a nonhydrogenated rubber core and hydrogenated outer rubber layer, in accordance with the layer model. The addition of H(PS‐g‐NR) at 10 wt % as modifier in an acrylonitrile–butadiene–styrene (ABS) copolymer increased the tensile and impact strengths and the thermal resistance of the ABS blends, and to a greater extent than that provided by blending with NR or PS‐g‐NR. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of zinc oxide nanoparticles as cure activator on the properties of natural rubber and nitrile rubber

Zinc oxide (ZnO) nanoparticles were synthesized by homogeneous precipitation and calcination method and were then characterized by transmission electron microscopy and X‐ray diffraction analysis. Synthesized ZnO was found to have no impurity and had a dimension ranging from 30–70 nm with an average of 50 nm. The effect of these ZnO nanoparticles as cure activator was studied for the first time in natural rubber (NR) and nitrile rubber (NBR) and compared with conventional rubber grade ZnO with special reference to mechanical and dynamic mechanical properties. From the rheograph, the maximum torque value was found to increase for both NR and NBR compounds containing ZnO nanoparticles. ZnO nanoparticles were found to be more uniformly dispersed in the rubber matrix in comparison with the conventional rubber grade ZnO as evident from scanning electron microscopy/X‐ray dot mapping analysis. The tensile strength was observed to improve by 80% for NR when ZnO nanoparticles were used as cure activator instead of conventional rubber grade ZnO. An improvement of 70% was observed in the case of NBR. The glass transition temperature (T_g) showed a positive shift by 6°C for both NR and NBR nanocomposites, which indicated an increase in crosslinking density. The swelling ratio was found to decrease in the case of both NR and NBR, and volume fraction of rubber in swollen gel was observed to increase, which supported the improvement in mechanical and dynamic mechanical properties. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Influence of oil contents in dynamically cured natural rubber and polypropylene blends

Mechanical, dynamic, thermal, and morphological properties of dynamically cured 60/40 NR/PP TPVs with various loading levels of paraffinic oil were investigated. It was found that stiffness, hardness, tensile strength, storage shear modulus, complex viscosity, glass transition temperature (T_g) of the vulcanized rubber phase, degree of crystallinity and crystalline melting temperature (T_m) of the polypropylene (PP) phase decreased with increasing loading levels of oil. This is attributed to distribution of oil into the PP and vulcanized rubber domains causing oil‐swollen amorphous phase and vulcanized rubber domains. An increasing trend of elastic response in terms of tension set and damping factor was observed in the TPVs with loading levels of oil in a range of 0–20 phr. It is supposed that a major proportion of oil was first preferably migrated into the PP phase and caused an abrupt decreasing trend of degree of crystallinity and T_m of the PP phase. The dispersed vulcanized rubber domains remained small as particles with a low degree of swelling. Increasing loading levels of oil higher than 20 phr caused a decreasing trend of elongation at break and elastomeric properties. Saturation of oil in the PP phase was expected and the excess oil was transferred to the rubber phase which thereafter caused larger swollen vulcanized rubber domains. The remaining amount of oil was able to separate as submicron pools distributed in the PP matrix. This caused lowering of T_g, T_m, crystallinity of PP phase as well as strength, elastomeric, and dynamic properties of the TPVs. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Physical properties and cure characteristics of natural rubber/nanoclay composites with two different compatibilizers

The effects of epoxidized natural rubber (ENR) and maleic anhydride‐grafted polybutadiene (PB‐g‐MA) as compatibilizers to rubber formulations with and without organo‐modified layered silicates are investigated. The physical properties and curing characteristics of composites are studied by moving die rheometer, rubber process analyzer, tensile, tear, and hardness testing. The state of organoclay intercalation was determined by X‐ray diffraction method. The addition of compatibilizers, especially ENR 50, results in further intercalation or exfoliation of the organoclay that increased the clay dispersion in the rubber matrix. ENR 50 with organo‐modified clay improves the physical properties and changes the curing profile. The addition of PB‐g‐MA without organoclay increases the tensile strength (σ_max) by increasing the stock viscosity of the rubber compound. Interestingly, simultaneous increase in hardness and σ_max is achieved in the presence of both compatibilizers, a characteristic that is difficult to achieve and sometimes required in rubber processing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Miscibility of blends of epoxidized natural rubber and poly(ethylene-co-acrylic acid)

The blends of epoxidized natural rubber (50 mol %) (ENR) and poly(ethylene-co-acrylic acid) (PEA) (6 wt %) are demonstrated to be partially miscible up to 50% by weight of PEA and completely miscible beyond this proportion. The miscibility has been confirmed by a DSC study which exhibits a single second-order transition (T_g) for the 30 : 70 and 50 : 50 (ENR : PEA) blends. For the 70 : 30 (ENR : PEA) blend, the T_g's shift toward an intermediate value but do not merge to form a single T_g, making the blend partially miscible. The miscibility has been assigned to the esterification reaction between – OH groups formed in situ during melt blending of ENR and – COOH groups of PEA. The occurrence of such reactions have been confirmed by UV and IR spectroscopic studies. The existence of a single phase of the blends beyond 50 wt % of PEA has been shown by SEM studies. © 1995 John Wiley & Sons, Inc.     

Effect of phenol functionalization of carbon nanotubes on properties of natural rubber nanocomposites

This paper reports the results of studies on the effect of phenol functionalization of carbon nanotubes (CNTs) on the mechanical and dynamic mechanical properties of natural rubber (NR) composites. Fourier transform infrared spectrometry (FTIR) indicates characteristic peaks for ether and aromatic rings in the case of phenol functionalized CNT. Although differential scanning calorimetric (DSC) studies show no changes in the glass‐rubber transition temperature (T_g) of NR in the nanocomposites due to surface modification of CNT, dynamic mechanical studies show marginal shifting of T_g to higher temperature, the effect being pronounced in the case of functionalized CNT. Stress‐strain plots suggest an optimum loading of 5 phr CNT in NR formulations and the phenolic functionalization of CNT does not affect significantly the stress‐strain properties of the NR nanocomposites. The storage moduli register an increase in the presence of CNT and this increase is greater in the case of functionalized CNT. Loss tangent showed a decrease in the presence of CNT, and the effect is more pronounced in the case of phenol functionalized CNT. Transmission electron microscopy (TEM) reveals that phenol functionalization causes improvement in dispersion of CNT in NR matrix. This is corroborated by the increase in electrical resistivity in the case of phenol functionalized CNT/NR composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Rubber modification of unsaturated polyester resin with core–shell rubber particles: Effect of shell composition

Poly(butyl acrylate)/poly(vinyl acetate‐co‐methyl methacrylate) PBA/P(VAc‐co‐MMA) core–shell rubber particles with various shell compositions, i.e., VAc/MMA weight ratios, were used to toughen unsaturated polyester. The morphology and surface‐free energy of the rubber particles were determined by transmission electron microscopy (TEM) and contact angle measurements, respectively. The effect of shell structure on the dispersion state of rubber particles inside the unsaturated polyester resin was studied by scanning electron microscopy and TEM. Increasing MMA units in the shell changed the particle dispersion state from small agglomerates or globally well‐dispersed particles to large aggregates in the cured‐resin matrix. For the blends that contain 5 wt% rubber, the highest un‐notched impact toughness, stress‐intensity factor (K_IC), and fracture energy (G_IC) were observed for the blend containing PVAc shell particles. The results showed that by increasing the particle level from 5 to 10 wt%, the highest K_IC and G_IC values were obtained for the blend containing rubber particles with VAc/MMA (80/20 wt/wt) copolymer shell. The crack‐tip damage zone in the neat and rubber‐modified unsaturated polyester resins was observed by means of transmission optical microscopy. In addition, using PVAc shell particles exhibited a minimum reduction in the volume shrinkage and tensile properties of the rubber‐modified resin. POLYM. ENG. SCI., 52:1928–1937, 2012. © 2012 Society of Plastics Engineers     

Development and characterization of graphitic carbon nitride as nonblack filler in natural rubber composites

A new type of elastomeric composite containing natural rubber (NR) and graphitic carbon nitride (g-C₃N₄) has been successfully prepared with the reinforced property. The reinforcing effect of g-C₃N₄ in NR composites was examined by cure, mechanical, morphological, and swelling studies. Besides, epoxidized NR with 50-mol % epoxy level (ENR-50) was used as a compatibilizer to enhance the hydrophilic g-C₃N₄ filler capacity for hydrophobic NR composites. At the same filler load level, the mechanical properties of NR/g-C₃N₄ composites, such as tensile strength and tensile modulus, were consistently increased with increased ENR-50 content. To note, the ENR compatibilized composites have shown better-reinforced performance, which has been attributed to the hydrogen bonding interactions between the uncondensed amine groups in g-C₃N₄ and the polar groups in ENR. We believe that these newly prepared NR composites based on g-C₃N₄ as nonblack filler and ENR-50 as compatibilizer can find potential applications in modern day rubber research. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48136.     

One‐step latex compounding method for producing composites of natural rubber/epoxidized natural rubber/aminosilane‐functionalized montmorillonite: enhancement of tensile strength and oil resistance

Montmorillonite (Mt) was intercalated with cetyltrimethylammonium bromide and functionalized with three types of aminosilane (3‐aminopropyltrimethoxysilane, n‐(2‐aminoethyl)‐3‐aminopropyltrimethoxysilane and 3‐[2‐(2‐aminoethylamino)ethylamino]propyltrimethoxysilane). The modified Mt was compounded with natural rubber (NR)/epoxidized natural rubber (ENR) via one‐step latex compounding. The effect of the modified Mt content on the oil resistance and mechanical properties of the NR/ENR/modified Mt composites was investigated. The X‐ray diffraction patterns of the composites showed partial intercalation/exfoliation of the modified Mt in the rubber matrix. Cryogenic fracture and X‐ray fluorescence results revealed highly dispersed modified Mt in the composites in the presence of 10 phr ENR. All three aminosilane groups slightly improved the oil resistance, with the long‐alkyl‐length group producing the greatest improvement. The addition of a small amount of modified Mt improved both oil resistance and tensile strength by increasing in the average diffusion path length in the NR matrix and enhancing the interaction between the modified Mt and the epoxide groups in ENR. The addition of 1.0 phr of modified Mt increased the tensile strength by 18% and decreased the elongation at break by 12% compared with a neat NR/ENR blend. © 2017 Society of Chemical Industry     

Effects of epoxidized natural rubber (ENR‐50) and processing parameters on the properties of NR/EPDM blends using response surface methodology

The effects of epoxidized natural rubber (ENR‐50) and processing parameters on the properties of natural rubber/ethylene–propylene–diene rubber (NR/EPDM; 70 : 30 phr) blends were studied. The compounds were prepared by melt compounding method. Using response surface methodology of two‐level full factorial, the effects of ENR‐50 contents (?1 : 5 phr; +1 : 10 phr), mixing temperature (?1 : 50°C; +1 : 110°C), rotor speed (?1 : 40 rpm; +1 : 80 rpm), and mixing time (?1 : 5 min; +1 : 9 min) in NR/EPDM blends were evaluated. Cure characteristics and tensile properties were selected as the responses. The significance of factors and its interaction was analyzed using ANOVA and the model's ability to represent the system was confirmed using the constant of determination, R² with values above 0.90. It was found that the presence of ENR‐50 has the predominant role on the properties of NR/EPDM blends. The addition of ENR‐50 significantly improved cure characteristics and tensile strength up to 5.12% and 6.48% compared to neat NR/EPDM blends, respectively. These findings were further supported by swell measurement, differential scanning calorimetry, and scanning electron microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40713.     

Synthesis and properties of cross‐linked polymers from epoxidized rubber seed oil and triethylenetetramine

A series of epoxidized oils were prepared from rubber seed, soybean, jatropha, palm, and coconut oils. The epoxy content varied from 0.03 to 7.4 wt %, in accordance with the degree of unsaturation of the oils (lowest for coconut, highest for rubber seed oil). Bulk polymerization/curing of the epoxidized oils with triethylenetetramine (in the absence of a catalyst) was carried out in a batch setup (1 : 1 molar ratio of epoxide to primary amine groups, 100°C, 100 rpm, 30 min) followed by casting of the mixture in a steel mold (180°C, 200 bar, 21 h) and this resulted in cross‐linked resins. The effect of relevant pressing conditions such as time, temperature, pressure, and molar ratio of the epoxide and primary amine groups was investigated and modeled using multivariable nonlinear regression. Good agreement between experimental data and model were obtained. The rubber seed oil‐derived polymer has a T_g of 11.1°C, a tensile strength of 1.72 MPa, and strain at break of 182%. These values are slightly higher than for commercial epoxidized soybean oil (T_g of 6.9°C, tensile strength of 1.11 MPa, and strain at break of 145.7%). However, the comparison highlights the potential for these novel resins to be used at industrial/commercial level. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42591.     

Influence of complexing treatment and epoxy resin coating on the properties of aramid fiber reinforced natural rubber

In this work, natural rubber/aramid fiber (NR/AF) composites were prepared with master batch method. AF was modified by using epoxy resin (EP) and accelerator 2‐ethyl‐4‐methylimidazole (2E4MZ) through surface coating on the basis of the complexing treatment with CaCl₂ solution. Hydroxyl‐terminated liquid isoprene rubber (LIR) was regarded as a compatibilizer between EP and NR. It is found that the crystallinity on AF surface is decreased by complexing reaction with CaCl₂ solution. Swelling and mechanical properties of the vulcanized composites, such as swelling degree, tensile and tear strength, tensile modulus at 300% elongation, are measured, and the tensile fracture morphology and dynamic mechanical analysis of the composites are investigated. The results show that the mechanical properties of composites with modified fibers are improved obviously and interfacial adhesion between matrix and the fiber is enhanced, especially for the AF coated with EP and imidazole. The best comprehensive mechanical properties of the composites are obtained with using CaCl₂‐EP/2E4MZ system when the ratio of m(EP)/m(AF) is 3%. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42122.     

Toughening of vinylester–urethane hybrid resins through functionalized polymers

Liquid nitrile rubber, hyperbranched polyester, and core/shell rubber particles of various functionality, namely, vinyl, carboxyl, and epoxy, were added up to 20 wt % to a bisphenol‐A‐based vinylester–urethane hybrid (VEUH) resin to improve its toughness. The toughness was characterized by the fracture toughness (K_c) and energy (G_c) determined on compact tensile (CT) specimens at ambient temperature. Toughness improvement in VEUH was mostly achieved when the modifiers reacted with the secondary hydroxyl groups of the bismethacryloxy vinyl ester resin and with the isocyanate of the polyisocyanate compound, instead of participating in the free‐radical crosslinking via styrene copolymerization. Thus, incorporation of carboxyl‐terminated liquid nitrile rubber (CTBN) yielded the highest toughness upgrade with at least a 20 wt % modifier content. It was, however, accompanied by a reduction in both the stiffness and glass transition temperature (T_g) of the VEUH resin. Albeit functionalized (epoxy and vinyl, respectively) hyperbranched polymers were less efficient toughness modifiers than was CTBN, they showed no adverse effect on the stiffness and T_g. Use of core/shell modifiers did not result in toughness improvement. The above changes in the toughness response were traced to the morphology assessed by dynamic mechanical thermal analysis (DMTA) and fractographic inspection of the fracture surface of broken CT specimens. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 672–680, 2002; DOI 10.1002/app.10392     

Effect of carbon black loading on curing characteristics and mechanical properties of waste tyre dust/carbon black hybrid filler filled natural rubber compounds

Curing characteristics, tensile properties, fatigue life, swelling behavior, and morphology of waste tire dust (WTD)/carbon black (CB) hybrid filler filled natural rubber (NR) compounds were studied. The WTD/CB hybrid filler filled NR compounds were compounded at 30 phr hybrid filler loading with increasing partial replacement of CB at 0, 10, 15, 20, and 30 phr. The curing characteristics such as scorch time, t₂ and cure time, t₉₀ decreased and increased with increment of CB loading in hybrid filler (30 phr content), respectively. Whereas maximum torque (M_HR) and minimum torque (M_L) increased with increasing CB loading. The tensile properties such as tensile strength, elongation at break, and tensile modulus of WTD/CB hybrid filler filled NR compounds showed steady increment as CB loading increased. The fatigue test showed that fatigue life increased with increment of CB loading. Rubber–filler interaction, Q_f/Q_g indicated that the NR compounds with the highest CB loading exhibited the highest rubber–filler interactions. Scanning electron microscopy (SEM) micrographs of tensile and fatigue fractured surfaces and rubber–filler interaction study supported the observed result on tensile properties and fatigue life. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011