Electrolyte‐ and pH‐responsive polyampholytes with potential as viscosity‐control agents in enhanced petroleum recovery

Low‐charge‐density amphoteric copolymers and terpolymers composed of AM, the cationic comonomer (3‐acrylamidopropyl)trimethyl ammonium chloride, and amino acid derived monomers (e.g., N‐acryloyl valine, N‐acryloyl alanine, and N‐acryloyl aspartate) have been prepared via free‐radical polymerization in aqueous media. These terpolymers with random charge distributions have been compared to terpolymers of like compositions containing the anionic comonomer sodium 3‐acrylamido‐3‐methylbutanoate. Terpolymer compositions determined by ¹³C‐ and ¹H‐NMR spectroscopy, terpolymer molecular weights and polydispersity indices obtained via size exclusion chromatography/multi‐angle laser light scattering, and hydrodynamic dimensions determined via dynamic light scattering have allowed a direct comparison of the fundamental parameters affecting the behavioral characteristics. The solution properties of low‐charge‐density amphoteric copolymers and terpolymers have been studied as functions of the solution pH, ionic strength, and polymer concentration. The low‐charge‐density terpolymers display excellent solubility in deionized water with no phase separation. The charge‐balanced terpolymers exhibit antipolyelectrolyte behavior at pH values greater than or equal to 6.5 ± 0.2. As the solution pH decreases, these charge‐balanced terpolymers become increasingly cationic because of the protonation of the anionic repeat units. The aqueous solution behavior (i.e., globule‐ to‐coil transition at the isoelectric point in the presence of salt and globule elongation with increasing charge asymmetry) of the terpolymers in the dilute regime correlates well with that predicted by the polyampholyte solution theories. An examination of the comonomer charge density, hydrogen‐bonding ability, and spacer group (e.g., the moiety separating the ionic group from the polymer chain) indicates that conformational restrictions of the sodium 3‐acrylamido‐3‐methylbutanoate and N‐acryloyl valine segments result in increased chain stiffness and higher solution viscosities in deionized water and brine solutions. On the other hand, the terpolymers with N‐acryloyl alanine and N‐acryloyl aspartate segments are more responsive to changes in the salt concentration. An assessment of the effects of the terpolymer structure on the viscosity under specified conditions of the ionic strength and pH from these studies should allow for rational design of optimized systems for enhanced petroleum recovery. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007.     

Ultrafiltration of metal ions by water‐soluble chelating poly(N‐acryloyl‐N‐methylpiperazine‐co‐N‐acetyl‐α‐aminoacrylic acid)

Water‐soluble copolymers of N‐acryloyl‐N‐methylpiperazine and N‐acetyl‐α‐aminoacrylic acid were synthesized by radical polymerization. The copolymerization yield ranged between 60 and 97%. The FTIR and NMR spectra demonstrated that the copolymerization occurred. The copolymer composition was determined from ¹H‐NMR spectra by comparison of methyl groups from both moieties. The copolymers were richest in AAA units. The metal ion retention properties were investigated by the liquid‐phase polymer‐based retention (LPR) technique at different pH and filtration factors. The affinity for the metal ions depended on the copolymer composition, pH, and filtration factor. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2556–2561, 2002     

Preparation of novel amphiphilic copolymer microspheres and their drug‐release and glucose‐sensitive properties

A novel amphiphilic copolymer was prepared by the copolymerization of N‐acryloyl‐3‐aminophenylboronic acid with β‐cyclodextrin containing maleic anhydride. The copolymer was fully characterized with ¹³C‐NMR, ¹H‐NMR, IR, and scanning electron microscopy. The self‐assembling mechanism of the copolymer in H₂O–CH₃OH cosolvents was studied. Gliclazide as a model drug was loaded inside the copolymer microspheres, and the drug‐release behavior of the microspheres was studied. The results of in vitro oscillating release tests indicated that the microspheres responded to glucose rapidly in 30 min, and the microspheres exhibited self‐regulated on–off release behavior four to six times in 6 h between the solution with 3 g/L glucose and the medium without glucose; this met the clinical requirements of multidrug delivery. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of temperature‐responsive copolymers based on N‐vinylcaprolactam and their grafting on fibres

BACKGROUND: Responsive materials are able to respond reversibly to an environmental stimulus. When the stimulus is temperature in the physiological range, the responsive material is particularly interesting for textile applications. We describe here the synthesis and characterization of reactive temperature‐responsive copolymers and their subsequent grafting on cotton fabrics. RESULTS: Copolymers of N‐vinylcaprolactam and various reactive monomers were synthesized via free radical polymerization in solution. The copolymers were characterized in terms of chemical structure, molecular weight and temperature‐responsive properties. The copolymer of N‐vinylcaprolactam and methacrylic acid (11 or 22 wt%) and the hydrolysed copolymer of N‐vinylcaprolactam and acryloyl chloride were found to be temperature responsive. They were subsequently grafted on cotton fabrics. The grafting was studied using X‐ray photoelectron spectroscopy and scanning electron microscopy measurements and was found to be effective. Finally, the modified cotton fabrics were found to exhibit temperature‐responsive water regain and water vapour transmission rates. CONCLUSION: Temperature‐responsive copolymers were synthesized, characterized and successfully grafted on cotton fabrics, yielding responsive fabrics. Such fabrics can hence be used to modulate the skin microclimate under textiles. Copyright © 2009 Society of Chemical Industry     

Phospha‐Michael Addition as a New Click Reaction for Protein Functionalization

A new type of click reaction between an alkyl phosphine and acrylamide was developed and applied for site‐specific protein labeling in vitro and in live cells. Acrylamide is a small electrophilic olefin that readily undergoes phospha‐Michael addition with an alkyl phosphine. Our kinetic study indicated a second‐order rate constant of 0.07 m ^?1 s^?1 for the reaction between tris(2‐carboxyethyl)phosphine and acrylamide at pH 7.4. To demonstrate its application in protein functionalization, we used a dansyl–phosphine conjugate to successfully label proteins that were site‐specifically installed with N^?‐acryloyl‐l ‐lysine and employed a biotin–phosphine conjugate to selectively probe human proteins that were metabolically labeled with N‐acryloyl‐galactosamine.     

Synthesis and characterization of N‐ and O‐alkylated poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline]

Poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline] was synthesized in an aqueous hydrochloric acid medium with a determined feed ratio by chemical oxidative polymerization. This polymer was used as a functional conducting polymer intermediate because of its side‐group reactivity. To synthesize the alkyl‐substituted copolymer, the initial copolymer was reacted with NaH to obtain the N‐ and O‐anionic copolymer after the reaction with octadecyl bromide to prepare the octadecyl‐substituted polymer. The microstructure of the obtained polymers was characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, and X‐ray diffraction. The thermal behavior of the polymers was investigated by thermogravimetric analysis and differential scanning calorimetry. The morphology of obtained copolymers was studied by scanning electron microscopy. The cyclic voltammetry investigation showed the electroactivity of poly [aniline‐co‐N‐(2‐hydroxyethyl) aniline] and N and O‐alkylated poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline]. The conductivities of the polymers were 5 × 10^?5 S/cm for poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline] and 5 ×10^?7 S/cm for the octadecyl‐substituted copolymer. The conductivity measurements were performed with a four‐point probe method. The solubility of the initial copolymer in common organic solvents such as N‐methyl‐2‐pyrrolidone and dimethylformamide was greater than polyaniline. The alkylated copolymer was mainly soluble in nonpolar solvents such as n‐hexane and cyclohexane. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of a glycosaminoglycan polymer mimetic using an N‐alkyl‐N,N‐linked urea oligomer containing glucose pendant groups

The synthesis of a glycosaminoglycan polymer mimetic is reported. An isopropylidene protected glucose methacrylate monomer was copolymerized under reversible addition fragmentation chain transfer polymerization control with an azido‐containing comonomer to a molecular weight of 29 000 g mol^?1 with polydispersity of 1.21. The comonomer ratio was determined to be 15:1 based on ¹H NMR spectroscopy. This copolymer was coupled to sugar‐functionalized N‐alkyl‐N,N‐linked urea oligomers using a copper catalyzed alkyne/azide cycloaddition reaction. The reaction efficiency was 100% as monitored by ¹H NMR spectroscopy. The isopropylidene protecting groups on the polymer and N‐alkyl‐N,N‐linked urea oligomers were removed using acid hydrolysis to give the final polysaccharide mimetic. It is expected that these polymers will have applications in a variety of future therapeutic applications. © 2013 Society of Chemical Industry     

Synthesis of new poly(amide–imide)s derived from trimellitylimido‐L‐phenylalanine

N‐Trimellitylimido‐L ‐phenylalanine was prepared from the reaction of 1,2,4‐benzenetricarboxylic anhydride with L ‐phenylalanine in N,N‐dimethylformamide solution at refluxing temperature. The direct polycondensation reaction of the monomer imide‐diacid with 4,4′‐diaminodiphenylsulfone, 4,4′‐diaminodiphenylmethane, 1,4‐phenylenediamine, 1,3‐phenylenediamine, 2,4‐diaminotoluene, 4,4′‐diaminodiphenylether and benzidine was carried out in a medium consisting of triphenyl phosphite, N‐methyl‐2‐pyrrolidone, pyridine and calcium chloride. The resulting poly(amide–imide)s, PAIs, having inherent viscosities of 0.21–0.45 dlg^?1 were obtained in high yield. All of the above compounds were fully characterized by IR spectroscopy and elemental analyses. The optical rotation of all PAIs has also been measured. Some structural characterization and physical properties of these new optically active PAIs are reported. © 2001 Society of Chemical Industry     

N,N‐diethyl dithiocarbamato group induced photografting of methyl methacrylate onto polyurethane

The N,N‐diethyl dithiocarbamato group present in a variety of compounds acts as an initiator in the photopolymerization processes. The photolability of this group is due to the cleavage of the C S bond by UV irradiation. N,N‐Diethyl dithiocarbamato‐(1,2)‐propane diol with a pendent N,N‐diethyl dithiocarbamato group was prepared from 3‐chloro‐(1,2)‐propane diol and sodium diethyl dithiocarbamate. A polyurethane macrophotoinitiator was then synthesized by a two‐step process, where N,N‐diethyl dithiocarbamato‐(1,2)‐propane diol was used as the chain extender. Other components used included 4,4′‐diphenylmethane diisocyanate and poly(propylene glycol) (molecular weight = 1000). The polyurethane thus synthesized had pendent N,N‐diethyl dithiocarbamato groups. This polyurethane macrophotoinitiator was then used to polymerize methyl methacrylate in a photochemical reactor (Compact‐LP‐MP 88) at 254 nm. The resulting graft copolymer, polyurethane‐g‐poly(methyl methacrylate), was freed from the homopolymer by a standard procedure. The graft copolymer was characterized by Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, thermogravimetric analysis, differential scanning calorimetry, solution viscometry, and scanning electron microscopy. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Amphiphilic copolymer with pendant pyrenebutyryl hydrazide group: Synthesis,characterization, and recognition for carbonate anion

Novel hydrophobic monomer N‐(1‐pyrenebutyryl)–N′‐methacryloyl hydrazide (PyMAHy) was synthesized and copolymerized with N‐vinylpyrrolidone (NVP) to get a series of amphiphilic copolymers. FTIR, ¹H NMR, TEM, gel permeation chromatography–multi‐angle laser light scattering, UV–vis spectroscopy, and fluorescence spectroscopy were used to characterize these polymers. Results of fluorescence measurements show that these copolymers have good recognition ability to CO₃^2? anion and the fluorescence emission intensity was quenched linearly upon the addition of CO₃^2? anion. The recognition for CO₃^2? anion was also proved by the results of TEM for the significantly difference in the morphology of copolymer before and after adding CO₃^2? anion into copolymer Tris–HCl buffer solution. Results suggest the potential of these amphiphilic copolymers as fluorogenic chemosensor materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2371–2376, 2006     

Temperature‐responsive alginate‐g‐poly(N,N‐diethylacrylamide) copolymer: Synthesis,characterization, and swelling behavior

Temperature‐responsive polymers have recently gained importance due to their applications in drug delivery. Herein, temperature‐responsive graft copolymer (Alg‐g‐PDEAAm) of alginate and N,N‐diethylacrylamide was synthesized by microwave‐assisted copolymerization using potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine initiator system. The reaction conditions for the best grafting (331%) have been optimized by changing microwave irradiation time, temperature, N,N‐diethylacrylamide, and alginate concentrations. The spectroscopic characteristic, thermal properties, and surface morphology of the copolymers were investigated by FTIR, ¹H‐NMR, DSC/TGA, XRD, gel permeation chromatography, and SEM. Furthermore, low critical solution temperatures of Alg‐g‐PDEAAm copolymers were detected by UV spectroscopy. Swelling ratio of graft microspheres was carried out at 25, 32, and 37 °C, and microspheres were found exhibiting temperature‐responsive property. Cytotoxicity test indicated the Alg‐g‐PDEAAm copolymer and its microsphere were biocompatible. Therefore, based on the results the synthesized temperature‐responsive copolymer could be considered as a promising biomaterial. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46688.     

Stereoselective partitioning of organic substrates by thermoresponsive polymers in aqueous phases

Partitioning of organic substrates by thermoresponsive polymer having N‐acryloylaminoalcohol moieties in aqueous phase has been studied. Thermoresponsive polymers, such as poly(N‐isopropylacrylamide) (PNIPAAm) and poly(NIPAAm‐co‐N‐acryloyl‐(±)‐alaninol) (poly(NIPAAm‐co‐HIPAAm)), were found to concentrate several organic substrates into the hydrophobic field generated during their phase transition. The amount of the substrates recoverd from the polymer phase mainly depended on the hydrophobicity of the substrates. Aqueous solutions of PNIPAAm (lower critical solution temperature, LCST = 33°C) and poly(NIPAAm‐co‐HIPAAm) (LSCT = 41°C) containing 1‐phenylethanol showed LCSTs at 22°C and 33°C, respectively. The changes of LCSTs indicate that specific interactions such as hydrogen bonding between the side chain functionalities of the polymers and the substrates influence the phase transition behavior. Moreover, new optically active polymers having chiral aminoalcohol moieties have been synthesized by copolymerizations of NIPAAm with N‐acryloylaminoalcohols such as N‐acryloyl‐(S)‐alaninol and N‐acryloyl‐(S)‐prolinol. The (R)/(S) ratio of 1‐phenylethanol recovered from poly(NIPAAm‐co‐N‐acryloyl‐(S)‐alaninol) and poly(NIPAAm‐co‐N‐acryloyl‐(S)‐prolinol) were determined to be 75/25 and 68/32, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3458–3464, 2013     

UV‐Triggered Optical Response and Oxygen Scavenging Ability of a Water‐Soluble Poly(N,N‐dimethylacrylamide‐co‐2‐vinylbenzylanthraquinone) Copolymer

A vinyl‐modified anthraquinone (AQ) derivative (Vinyl‐AQ) is synthesized through a palladium‐mediated Suzuki coupling reaction between vinylphenylboronic acid and 2‐chloromethylanthraquinone and, subsequently, copolymerized with N,N‐dimethylacrylamide (DMAM) through free radical copolymerization in organic solvent. The chemical structure of the resulting water‐soluble copolymer, P(DMAM‐co‐AQ), is verified using techniques such as proton nuclear magnetic resonance, attenuated total reflection‐infrared spectroscopy, thermogravimetric analysis, and UV–vis spectroscopy. The evolution of the oxygen scavenging abilities of aqueous P(DMAM‐co‐AQ) solutions after UV irradiation is monitored as a function of UV irradiation time, concentration of AQ moieties, and pH. The copolymer is proved an effective UV‐triggered oxygen scavenger, leading to dissolved oxygen contents below 1 ppm for the optimized experimental conditions. This behavior is related with the appearance of novel chemical species with interesting optical properties, as suggested by the respective evolution of the UV–vis absorption and photoluminescence spectra after UV irradiation.     

Conjugates of poly(N‐isopropyl acrylamide‐co‐acrylic acid) with alanine monopeptide,dipeptide, and tripeptide

A random copolymer of N‐isopropyl acrylamide (NIPAAm) and acrylic acid (AAc) with an AAc content of 3.1 ± 0.19 mmol of carboxylic acid groups per gram of the copolymer and with a number‐average molecular weight of 1400 was synthesized by free‐radical polymerization with 2,2′‐azoisobutyronitrile in dimethylformamide. Then, monopeptide, dipeptide, and tripeptide (i.e., alanine) conjugates of this copolymer were prepared with their carboxyl‐end‐protected (with methyl ester hydrochloride) form of alanine, with a water‐soluble carbodiimide. Of the carboxylic acids, 93, 69, and 57% were conjugated (loaded) with alanine at the monopeptide, dipeptide, and tripeptide conjugation steps, respectively. The chemical structures of the copolymer and conjugates were analyzed by Fourier transform infrared and ¹H‐NMR, which revealed the conjugate formation. Amino acid conjugation caused significant decreases in the lower critical solution temperatures (LCST) of the copolymer, especially at pH 7.4. The LCST values of the dipeptide and tripeptide conjugates of poly(NIPAAm‐co‐AAc) at both pH 4.0 and 7.4 shifted to significantly higher temperatures. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2012–2019, 2003     

Functionalization of chitosan via single electron transfer living radical polymerization in an ionic liquid and its antimicrobial activity

In this work, single electron transfer living radical polymerization (SET‐LRP) was used to functionalize chitosan in a well‐controlled manner. The chitosan‐based macroinitiator was first synthesized and then initiated the SET‐LRP of methacryloyloxyethyl trimethylammonium chloride (DMC) in ionic liquid system, using Cu⁰/N,N,N′,N′,N′′‐pentamethyldiethylenetriamine as a catalyst. The grafting of PDMC brushes on chitosan was confirmed and analyzed by Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance. Transmission electron microscopy reveals that the chitosan copolymer showed self‐assembled behavior in acetone. Surface properties of the copolymer have been investigated by environment scanning electron microscopy analysis. The linear relationship between the ln([M]₀/[M]_t) and time, the linear increase of number‐average molecular mass with conversion as well as the low polydispersity index of the polymer confirmed the “living/controlled” features of the polymerization of DMC through SET‐LRP. Finally, the chitosan copolymer demonstrates its potential antibacterial application, showing excellent inhibitive capability against Escherichia coli. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42754.     

Synthesis and characterization of N‐acryloylcarbazole/methyl methacrylate copolymers

Copolymers of N‐acryloylcarbazole (A) and methyl methacrylate (M) were synthesized in different in‐feed ratios. The composition of the copolymer was determined by the help of ¹H NMR spectrum. The comonomer reactivity ratios determined by Kelen‐Tudos (KT) and nonlinear error‐in‐variables methods were r_A = 1.12 ± 0.16, r_M = 0.94 ± 0.14, and r_A = 1.05, r_M = 0.90, respectively. Complete spectral assignments of the ¹H and ¹³C ¹H NMR spectra of the copolymers were done by the help of distortionless enhancement by polarization transfer (DEPT) and two‐dimensional NMR techniques, such as heteronuclear single quantum coherence (HSQC), total correlation spectroscopy (TOCSY), and heteronuclear multiple bond correlation (HMBC). The methine, α‐methyl, and carbonyl carbon resonances were found to be sequence sensitive. The signals obtained were broad because of the restricted rotation of bulky carbazole group and the quadrupolar effect of nitrogen present in carbazole moiety. Glass transition temperatures (T_g) were determined by differential scanning calorimetry and were found to be characteristic of copolymer composition. As the N‐acryloylcarbazole content increases, the T_g increases from 378.3 K for poly(methyl methacrylate) to 430.4 K for poly(N‐acryloylcarbazole). Variation in T_g with the copolymer composition were found to be in good agreement with theoretical values obtained from Johnston and Barton equations. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2667–2676, 2006     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Copolymerization of styrene with an α‐olefin via atom transfer radical polymerization

This investigation reports the preparation of styrene–α‐olefinic random copolymers, using 1‐octene as an α‐olefin, via atom transfer radical polymerization. Atom transfer radical copolymerization of styrene with 1‐octene was successfully carried out using phenylethyl bromide as initiator and CuBr as catalyst in combination with N, N, N′, N″, N″‐pentamethyldiethylenetriamine as ligand. The copolymers had controlled molecular weight, narrow dispersity and well‐defined end groups with significant 1‐octene incorporation in the polymer. Incorporation of 1‐octene in the copolymers was confirmed using ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy. An increase in 1‐octene content in the monomer feed led to an increase in the level of incorporation of the α‐olefin in the copolymer. An increase in the concentration of 1‐octene led to a decrease in the rate of polymerization and an increase in dispersity. The glass transition temperature of the copolymer gradually decreased as the incorporation of 1‐octene increased. Copyright © 2011 Society of Chemical Industry     

Synthesis of novel optically active poly(ester‐imide)s with benzophenone linkages by microwave‐assisted polycondensation

A new simple and rapid polycondensation reaction of 4,4′‐carbonyl‐bis(phthaloyl‐L ‐alanine)diacid chloride [N,N ′‐(4,4′‐carbonyldiphthaloyl)]bisalanine diacid chloride with several diphenols, such as bisphenol‐A, phenolphthalein, 1,8‐dihydroxyanthraquinone, 4,4′‐dihydroxybiphenyl, 1,5‐dihydroxynaphthalene and hydroquinone, in the presence of a small amount of a polar organic medium such as o‐cresol was performed using a domestic microwave oven. The polycondensation reaction proceeded rapidly and was almost complete within 12 min to give a series of poly(ester‐imide)s with inherent viscosities of about 0.35–0.58 dl g⁻¹. The resulting poly(ester‐imide)s were obtained in high yield and are optically active and thermally stable. All the above compounds have been fully characterized by IR spectroscopy, elemental analysis, inherent viscosity (η_inh), solubility test and specific rotation. Thermal properties of the poly(ester‐imide)s have been investigated using thermal gravimetric analysis (TGA). © 2000 Society of Chemical Industry     

Synthesis and characterization of heat‐resistant N‐phenylmaleimide–styrene–maleic anhydride copolymers and application in acrylonitrile–butadiene–styrene resin

The heat‐resistant copolymer of N‐phenylmaleimide (NPMI)–styrene (St)–maleic anhydride (MAH) was synthesized in xylene at 125°C with di‐tert‐butyl diperoxyterephthalate as an initiator. The characteristics of the copolymer were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR), gel permeation chromatography, and elemental analysis. The ¹³C‐NMR results show that the copolymer possessed random sequence distribution; this was also supported by the differential scanning calorimetry experiment, in which a single glass‐transition temperature (T_g) of 202.3°C was observed. The thermal stability and degradation mechanism of the copolymer were investigated by thermogravimetric analysis. Using the Kissinger equation and Ozawa equation, we proved a nucleation controlling mechanism with an apparent activation energy of 144 kJ/mol. Blends of acrylonitrile–butadiene–styrene with the NPMI–St–MAH copolymer with various contents were prepared with a twin‐screw extruder processes. The mechanical and thermal properties of the materials, such as the tensile and flexural strength, T_g's, and Vicat softening temperatures, were all enhanced with the addition of the modifier, whereas the melt flow index decreased. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012