Sustained release of dexamethasone from drug‐loading PLGA scaffolds with specific pore structure fabricated by supercritical CO2 foaming

Inducing differentiation of bone marrow stem cells to generate new bone tissue is highly desirable by controlling the release of some osteoinductive or osteoconductive factors from porous scaffolds. In this study, dexamethasone was selected as a representative of small molecule drugs and dexamethasone‐loading porous poly(lactide‐co‐glycolide) (PLGA) scaffolds were successfully fabricated by supercritical CO₂ foaming. Scanning electron microscopy images showed that scaffolds had rough and relatively interconnected pores facilitating cells adhesion and growth. Specially, dexamethasone which was incorporated into PLGA matrix in a molecularly dispersed state could serve as a nucleation agent to be helpful for the formation of interconnected pores. Dexamethasone‐loading porous PLGA scaffolds exhibited sustained release profile, and the delivery of dexamethasone from porous scaffolds could last for up to 2 months. The cumulative released amount of dexamethasone was relevant with drug loading capacity (1.66%–2.95%) and pore structure of scaffolds; while the release behavior was anomalous (non‐Fickian) transport by fitting with the simple exponential equation, which had a diffusional exponent n higher than 0.5. It is feasible to fabricate drug‐loading porous scaffolds by supercritical CO₂ foaming with specific pore structure and sustained release profile, which can be well applied in bone tissue engineering. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46207.     

Colon‐specific oral delivery of vitamin B2 from poly(acrylamide‐co‐maleic acid) hydrogels: An in vitro study

Hydrogels, composed of poly(acrylamide‐co‐maleic acid) were synthesized and the release of vitamin B₂ from these gels was studied as a function of the pH of the external media, the initial amount of the drug loaded, and the crosslinking ratio in the polymer matrix. The gels containing 3.8 mg of the drug per gram gel exhibit almost zero‐order release behavior in the external media of pH 7.4 over the time interval of more than their half‐life period (t_1/2). The amount of the drug loaded into the hydrogel also affected the dynamic release of the encapsulated drug. As expected, the gels showed a complete swelling‐dependent mechanism, which was further supported by the similar morphology of the swelling and release profiles of the drug‐loaded sample. The hydrophilic nature of the drug riboflavin does not contribute toward the zero‐order release dynamics of the hydrogel system. On the other hand, the swelling osmotic pressure developed between the gels and the external phase, due to loading of the drug by equilibration of the gels in the alkaline drug solution, plays an effective role in governing the swelling and release profiles. Finally, the minimum release of the drug in the swelling media of pH 2.0 and the maximum release with zero‐order kinetics in the medium of pH 7.4 suggest that the proposed drug‐delivery devices have a significant potential to be used as an oral drug‐delivery system for colon‐specific delivery along the gastrointestinal (GI) tract. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1133–1145, 2002; DOI 10.1002/app.10402     

Controlled‐release drug carriers based hierarchical silica microtubes templated from cellulose acetate nanofibers

We report a facile method to synthesize hollow silica microtubes (SMTs) from electrospun cellulose acetate fiber precursors. Specific surface areas of up to 765 m²/g (Brunauer–Emmett–Teller) were measured for the SMTs, which had a typical wall thickness of ～100 nm and submicron inner diameters. An average pore size of 4.6 nm and pore volume of 0.41 cm³/g were derived from Barrett–Joyner–Halenda fitting, whereas Horvath–Kawazoe pore size distribution analysis revealed microporous median pore size and maximum pore volume of 0.7 nm and 0.18 cm³/g, respectively. The as‐prepared SMTs featuring micro‐ and mesoporous structures in the walls where amino‐functionalized to facilitate a very high drug loading (15% by weight). Drug release profile revealed sustained release rates (79% of acetylsalicylic acid was released after 6 h). It is concluded that the high drug loading and sustained release resulted from the advantageous integration of SMTs' hollow structure and wall mesoporosity. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42562.     

Liver‐targeting doxorubicin‐conjugated polymeric prodrug with pH‐triggered drug release profile

The aim of the research presented was to develop a potential liver‐targeting prolonged‐circulation polymeric prodrug of doxorubicin (Dox) with a pH‐triggered drug release profile. In particular, linear dendritic block copolymers composed of polyamidoamine dendrimer (PAMAM) and poly(ethylene glycol) (PEG; number‐average molecular weight of 2000 g mol^?1) with or without galactose (Gal) were synthesized. Dox was coupled to the copolymers via an acid‐labile hydrazone linker. These prodrugs, designated Gal‐PEG‐b‐PAMAM‐Dox_n and mPEG‐b‐PAMAM‐Dox_m, showed accelerated Dox release as the pH decreased from 8.0 to 5.6. Cytotoxicity of the prodrugs was lower than that of free Dox due to the gradual drug release nature. Compared to mPEG‐b‐PAMAM‐Dox_m, Gal‐PEG‐b‐PAMAM‐Dox_n showed rather high cytotoxicity against Bel‐7402, suggestive of its galactose receptor‐mediated enhanced tumor uptake. This galactose receptor‐mediated liver‐targeted profile was further confirmed by the prolonged retention time in hepatoma tissue monitored using magnetic resonance imaging. Gal‐PEG‐b‐PAMAM‐Dox_n showed better in vivo antitumor efficacy than free Dox, suggesting its great potential as a polymeric antitumor prodrug. Copyright © 2010 Society of Chemical Industry     

Studies on Micellar Behavior of PEO‐PBO or PEO‐PBO‐PEO Copolymers,or Surface Active Amphiphilic Ionic Liquids in Aqueous Media and Exploration of the Micellar Solutions for Solubilization of Dexamethasone and its Delayed Release

The aggregation behavior of a di‐ and tri‐block copolymers of type PEO‐PBO, PEO‐PBO‐PEO, surface‐active ionic liquid (SAIL) of type 4‐dodecyl‐4‐methylmorpholinium chloride [C₁₂mmor][Cl], and 1‐dodecyl‐1‐methylpyrrolidinium chloride [C₁₂mpyrr][Cl]) in water as well as in 10 mM of a poorly water soluble dexamethasone (dex) aqueous solution was studied by determining the critical micelle concentrations using drug solubilization, surface tension, and isothermal titration calorimetry (ITC) methods. ITC measurements were also made on solutions prepared by mixing the micellar aqueous solutions of copolymers and simple aqueous solutions of SAIL across the mole fractions at three different temperatures (298.15, 308.15, and 318.15 K). The thermodynamic parameters, namely Gibbs free energy (ΔG_m), enthalpy (ΔH_m), and entropy (ΔS_m), of micellization were calculated, and it was observed that the negative ΔG_m and positive ΔS_m for the mixture solutions increase with the increase in mole fraction of SAIL. Otherwise, the micellization is reported to be a spontaneous and highly entropy‐driven process. The dex‐solubilized micellar solutions were mixed with agar to obtain standing gels. The gel samples were dry‐cast into thin films, and the release of dex from films by simple dilution was monitored by UV measurements. The drug release data was fitted to several mechanistic models, and it was inferred that the release mechanism for dex from thin films is non‐Fickian for mixtures and Fickian in copolymer or SAIL micellar aqueous solutions. The transport of dex is diffusion‐controlled with diffusivities of 5.8–12 × 10^?11 m² s^?1 for copolymer micelles, 5–11 × 10^?11 m² s^?1 for micelles of SAIL, and 3–14 × 10^?11 m² s^?1 for the mixed micelles of copolymer and SAIL in aqueous media.     

Preparation of new dendrimer‐like star‐shaped amphiphilic poly(ethylene glycol)–poly(ϵ‐caprolactone) copolymers for biocompatible and high‐efficiency curcumin delivery

Novel amphiphilic star‐shaped terpolymers comprised of hydrophobic poly(?‐caprolactone), pH‐sensitive polyaminoester block and hydrophilic poly(ethylene glycol) (M_n = 1100, 2000 g mol^?1) were synthesized using symmetric pentaerythritol as the core initiator for ring‐opening polymerization (ROP) reaction of ?‐caprolactone functionalized with amino ester dendrimer structure at all chain ends. Subsequently, a second ROP reaction was performed by means of four‐arm star‐shaped poly(?‐caprolactone) macromer with eight ‐OH end groups as the macro‐initiator followed by the attachment of a poly(ethylene glycol) block at the end of each chain via a macromolecular coupling reaction. The molecular structures were verified using Fourier transform infrared and ¹H NMR spectroscopies and gel permeation chromatography. The terpolymers easily formed core–shell structural nanoparticles as micelles in aqueous solution which enhanced drug solubility. The hydrodynamic diameter of these agglomerates was found to be 91–104 nm, as measured using dynamic light scattering. The hydrophobic anticancer drug curcumin was loaded effectively into the polymeric micelles. The drug‐loaded nanoparticles were characterized for drug loading content, encapsulation efficiency, drug–polymer interaction and in vitro drug release profiles. Drug release studies showed an initial burst followed by a sustained release of the entrapped drug over a period of 7days at pH = 7.4 and 5.5. The release behaviours from the obtained drug‐loaded nanoparticles indicated that the rate of drug release could be effectively controlled by pH value. Altogether, these results demonstrate that the designed nanoparticles have great potential as hydrophobic drug delivery carriers for cancer therapy. © 2015 Society of Chemical Industry     

Encapsulation of curcumin by methoxy poly(ethylene glycol‐b‐aromatic anhydride) micelles

Suitable carrier systems for sustained release of curcumin were studied by using the self‐assembled polymeric micelles. Poly(ethylene glycol) methyl ether and poly(aromatic anhydride) were used as the hydrophilic and hydrophobic blocks, respectively, in forming amphiphilic diblock copolymers. Four different types of polymers methoxy poly(ethylene glycol‐ b‐1,3‐bis(p‐carboxyphenoxy)propane) (mPEG₅₀₀₀CPP, mPEG₂₀₀₀CPP), methoxy poly(ethylene glycol‐b‐1,6‐bis(p‐carboxyphenoxy)hexane) (mPEG₅₀₀₀CPH, mPEG₂₀₀₀CPH) were synthesized via melt condensation approach. Micelles were formed at very low polymer concentration with stable hydrophobic cores. The particle sizes of micelles remained stable during degradation period. All four different polymeric micelles showed low cytotoxicity toward human fibroblasts cells and can kill cancer cells in very low concentrations. High loading efficiency and drug content were observed in curcumin‐loaded micelles. Curcumin showed mild initial burst (30% of drug loading in the first 24 h) when released from the micelles and its release was sustained for at least 18 days. These micelles, especially those of mPEG₅₀₀₀CPP, show potential to serve as the delivery vehicles for sustained release of curcumin. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Physicochemical Characterization of Chrysin‐Derivative‐Loaded Nanostructured Lipid Carriers with Special Reference to Anticancer Activity

Homologues long‐chain chrysin derivatives (LCD, C _n: 8–18) were synthesized and incorporated into nanostructured lipid carriers (NLC) with the aim to treat human neuroblastoma. Mutual miscibility and attractive interactions among the NLC components, namely tripalmitin (TP), cetyl palmitate (CP), oleic acid (OA), and the chrysin (CHR) derivatives (LCD) at the air–water interface were assessed by the Langmuir monolayer approach. Optimum combination for the NLC formulations was found to be 2:2:1 (M/M/M) for TP/CP/OA, respectively. NLC formulations, both in the absence and presence of LCD, were characterized by combined dynamic light scattering, electron microscopy, atomic force microscopy, and differential scanning calorimetry. The size and zeta potential of the NLC formulations were found in the range 200–350 nm and ?12 to ?18 mV, respectively. Encapsulation efficiency and release kinetics of CHR and LCD when loaded into NLC were also evaluated. LCD exhibited maximum incorporation, drug‐loading capacity, and sustained release because of its enhanced hydrophobicity. Superior incorporation efficiency and sustained‐release profile of LCD were able to enhance their anticancer activity against human neuroblastoma cell lines, compared to CHR, making them promising agents in combating cancer.     

Preparation and characterization of magnetic star‐shaped amphiphilic copolymer nanoparticles of S‐Fe3O4‐PLA‐b‐MPEG

Magnetic star‐shaped amphiphilic copolymers (S‐Fe₃O₄‐PLA‐b‐MPEG) consisting of Fe₃O₄ as the core, poly(L ,D ‐lactide) (PLA) as the inner layer, and monomethyl polyethylene glycol (MPEG) as the out shell were synthesized. The syntheses included ring‐opening polymerization of L ,D ‐lactide initiated by hydroxyl modified Fe₃O₄ (Fe₃O₄‐(OH) _n), followed by the esterification of the PLA with MPEG. The structure of the star block copolymers were characterized by Fourier Transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, transmission electron microscopy, nanoparticle size analyzer, and vibrating sample magnetometer. The nanoparticles in aqueous solution were made from the amphiphilic star copolymer. The average size of the nanoparticles was adjustable and increased with the increase of the PLA segments in the copolymer. The cytotoxicity grade of the nanoparticles was zero determined by the analysis of cytotoxicity. The nanoparticles could potentially be used as the drug vehicles for magnetic‐response controlled release. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Cocrystallization behavior of poly(n‐docosyl acrylate) with n‐docosanoic acid by X‐ray and differential scanning calorimetry studies

Cocrystallization behavior of comb‐like poly(n‐docosyl acrylate) (PDA) with n‐docosanoic acid (C₂₂) has been studied by means of differential scanning calorimetry (DSC) and X‐ray diffraction (XRD) methods. The DSC curves of blended samples of neat PDA with C₂₂ show the characteristic melting endotherms that correspond to the melting of the crystallites. DSC measurements of PDA/C₂₂ blends also suggest the existence of another crystalline form induced by the addition of the C₂₂. From the XRD measurements, the existence of hexagonally‐packed crystalline lattice and the phase behavior of PDA/C₂₂ blends at different mole percent are confirmed. Thermal degradation behavior of PDA and its corresponding blends with C₂₂ is studied by thermogravimetric analysis. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2140–2146, 2005     

Hydrogels based on copolymers of 2‐hydroxyethylmethacrylate and 2‐hydroxyethylacrylate as a delivery system for proteins: Interactions with lysozyme

Hydrogels have attracted considerable attention due to numerous applications, in particular as contact lenses and carriers for sustained drug delivery. The aim of the present work is to characterize the interactions of copolymer hydrogels consisted of 2‐hydroxyethylmethacrylate (HEMA) and 2‐hydroxyethylacrylate (HEA) with a small protein (lysozyme) and to assess the potential applications of these hydrogels as a drug delivery system for sustained release of protein‐based therapeutics. Physicochemical properties of protein‐loaded hydrogels, as well as lysozyme in vitro loading and release and the conformation of the protein released from hydrogels were studied. The effect of copolymer composition on the protein deposition on hydrogels and protein aggregation in the presence of hydrogels was also assessed. The results show that introduction of HEA into the copolymeric hydrogels enhances their suitability as a delivery system for proteins. Copolymerisation of HEMA and HEA allows controlling the physicochemical properties of hydrogels and the protein release rate. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44768.     

Novel thermosensitive hydrogel composites based on poly(d,l‐lactide‐co‐glycolide) nanoparticles embedded in poly(n‐isopropyl acrylamide) with sustained drug‐release behavior

To reach sustained drug release, a new composite drug‐delivery system consisting of poly(d,l ‐lactide‐co‐glycolide) (PLGA) nanoparticles (NPs) embedded in thermosensitive poly(N‐isopropyl acrylamide) (PNIPAAm) hydrogels was developed. The PNIPAAm hydrogels were synthesized by free‐radical polymerization and were crosslinked with poly(ethylene glycol) diacrylate, and the PLGA NPs were prepared by a water‐in‐oil‐in‐water double‐emulsion solvent‐evaporation method. The release behavior of the composite hydrogels loaded with albumin–fluorescein isothiocyanate conjugate was studied and compared with that of the drug‐loaded neat hydrogel and PLGA NPs. The results indicate that we could best control the release rate of the drug by loading it to the PLGA NPs and then embedding the whole system in the PNIPAAm hydrogels. The developed composite hydrogel systems showed near zero‐order drug‐release kinetics along with a reduction or omission of initial burst release. The differential scanning calorimetry results reveal that the lower critical solution temperature of the developed composite systems remained almost unchanged (<1°C increase only). Such a characteristic indicated that the thermosensitivity of the PNIPAAm hydrogel was not distinctively affected by the addition of PLGA NPs. In conclusion, an approach was demonstrated for the successful preparation of a new hybrid hydrogel system having improved drug‐release behavior with retained thermosensitivity. The developed systems have enormous potential for many biotechnological applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40625.     

Effect of Polyoxyethylene Chain Length on the Physicochemical Properties of N,N‐Dimethyl‐N‐dodecyl Polyoxyethylene Amine Oxide Hybrid Surfactants (C12EOnAO,with n = 1–4)

In order to determine the structure‐performance relationship of nonionic‐zwitterionic hybrid surfactants, N,N‐dimethyl‐N‐dodecyl polyoxyethylene (n) amine oxides (C₁₂EO_nAO) with different polyoxyethylene lengths (EO_n, n = 1–4) were synthesized. For homologous C₁₂EO_nAO, it was observed that the critical micelle concentration (CMC), the maximum surface excess (Γ_m), CMC/C₂₀, and the critical micelle aggregation number (N_m,c) decreased on going from 1 to 4 in EO_n. However, there were concomitant increases in surface tension at the CMC (γ_CMC), minimum molecular cross‐sectional area (A_min), adsorption efficiency (pC₂₀), and the polarity ([I₁/I₃]_m) based on the locus of solubilization for pyrene. The values of log CMC and N_m,c decreased linearly with EO_n lengthening from 1 to 4, although the impact of each EO unit on the CMC of C₁₂EO_nAO (n = 1–4) was much smaller than that typically seen for methylene units in the hydrophobic main chains of traditional surfactants. Compared to the structurally related conventional surfactant N,N‐dimethyl‐N‐dodecyl amine oxide (C₁₂AO), C₁₂EO_nAO (n = 1–4) have smaller CMC, A_min, and CMC/C₂₀, but larger pC₂₀, Γ_m, and N_m,c with a higher [I₁/I₃]_m. This may be attributed to the moderately amphiphilic EO_n (n = 1–4) between the hydrophobic C₁₂ tail and the hydrophilic AO head group.     

PLA–PEG‐grafted hollow magnetic silica microspheres as the carrier of iodinated contrast media

In this work, hollow magnetic silica microspheres (HMS) were synthesized by the template method, polyethylene glycol (PEG) and poly(lactic acid) (PLA)‐grafted hollow magnetic microspheres HMS@PLA–PEG were successfully prepared through ring‐opening polymerization method. Ioversol was loaded into HMS@PLA–PEG by physical coating, and the drug loading content was up to 39.4%. It also exhibited a slower and steady release than HMS and the cumulative release was up to 55.1% at physiological pH, which implied the PLA–PEG could prolong the circulation time. Meanwhile, to improve the efficiency of contrast, we have developed composite microspheres encapsulating superparamagnetic iron oxide (Fe₃O₄) as magnetic target for increasing the local concentration of the contrast media and expecting to put magnetic resonance imaging (MRI) and computed tomography (CT) technology together to apply in medical applications. Furthermore, the cytotoxicity assay in vitro was also investigated. The results revealed the ioversol‐loaded HMS@PLA–PEG exhibited low toxicity at a higher concentration, even it is up to 400 μg/mL. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44914.     

Preparation of surface‐modified,micrometer‐sized carboxymethyl chitosan drug‐loaded microspheres

Drug‐loaded microspheres have attracted much attention in embolization therapy for liver cancer in recent years. Carboxymethyl chitosan has obvious advantages for biomedical applications because of its exceptional biocompatibility and biodegradability. In this study, surface‐modified carboxymethyl chitosan microspheres were prepared by the crosslinking reactions of carboxymethyl chitosan in a reverse suspension system with poly(ethylene glycol diglycidyl ether) (PEGDE) as the crosslinking agent; this was followed by the grafting polymerization of 2‐acrylamido‐2‐methyl propane sulfonic acid on the surface of the microspheres. The microspheres showed regular spherical shapes with size distributions ranging from 300 to 600 μm. Ion‐exchange groups (? COOH, ? SO₃H) were introduced into the microspheres; these groups could load doxorubicin with a loading rate as high as 34.6% in 24 h. This was an increase of 49.8% compared to that of the pure carboxymethyl chitosan microspheres. Additionally, the microspheres possessed large network structures because macromolecular PEGDE was used as the crosslinking agent. The drug‐release profile showed that the surface‐modified microspheres displayed a sustained‐release manner compared with the nonmodified microspheres in phosphate‐buffered saline. These microspheres have promising applications as drug‐loaded arterial embolization agents for the interventional treatment of tumors. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45731.     

Synthesis and characterization of a novel stimuli‐responsive magnetite nanohydrogel based on poly(ethylene glycol) and poly(N‐isopropylacrylamide) as drug carrier

A novel stimuli‐responsive magnetite nanohydrogel (MNHG), namely [poly(ethylene glycol)‐block‐poly(N‐isopropylacrylamide‐co‐maleic anhydride)₂]‐graft‐poly(ethylene glycol)/Fe₃O₄ [PEG‐b‐(PNIPAAm‐co‐PMA)₂]‐g‐PEG/Fe₃O₄, was successfully developed. For this purpose, NIPAAm and MA monomers were block copolymerized onto PEG‐based macroinitiator through atom transfer radical polymerization technique to produce PEG‐b‐(PNIPAAm‐co‐PMA)₂. The synthesized Y‐shaped terpolymer was crosslinked through the esterification of maleic anhydride units using PEG chains to afford a hydrogel. Afterward, magnetite nanoparticles were incorporated into the synthesized hydrogel through the physical interactions. The chemical structures of all synthesized samples were characterized using Fourier transform infrared and proton nuclear magnetic resonance spectroscopies. Morphology, thermal stability, size, and magnetic properties of the synthesized MNHG were investigated. In addition, the doxorubicin hydrochloride loading and encapsulation efficiencies as well as stimuli‐responsive drug release ability of the synthesized MNHG were also evaluated. The drug‐loaded MNHG at physiological condition exhibited negligible drug release values. In contrast, at acidic (pH 5.3) condition and a little bit higher temperature (41 °C) the developed MNHG showed higher drug release values, which qualified it for cancer chemotherapy due to especial physiology of cancerous tissue in comparison with the surrounding normal tissue. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46657.     

Thermoreversible hydrogels. XIX. Synthesis and swelling behavior and drug release behavior for the N‐isopropylacrylamide/poly(ethylene glycol) methylether acrylate copolymeric hydrogels

A series of thermosensitive copolymeric hydrogels were prepared from various molar ratios of N‐isopropylacrylamide (NIPAAm) and poly(ethylene glycol) methylether acrylate (PEGMEA_n), which was synthesized from acryloyl chloride and poly(ethylene glycol) mono methylether with three oxyethylene chain lengths. Investigation of the effect of the chain length of oxyethylene in PEGMEA_n, and the amount of the PEGMEA_n in the NIPAAm/PEGMEA_n copolymeric gels, on swelling behavior in deionized water was the main purpose of this study. Results showed that the swelling ratio for the present copolymeric gels increased with increasing chain length of oxyethylene in PEGMEA_n and also increased with increase in the amount of PEGMEA_n in the copolymeric gels. However, the gel strength and effective crosslinking density of these gels decreased with increase in swelling ratio. Some kinetic parameters were also evaluated in this study. Finally, the drug release and drug delivery behavior for these gels were also assessed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1683–1691, 2003     

Synthesis and liquid‐crystal‐aligning properties of novel aromatic poly(amide imide)s bearing n‐alkyloxy side chains

Novel aromatic poly(amide imide)s (m‐PAIs, m = 8, 12, 16) containing preformed isophthalamide unit and pendent n‐alkyloxy (‐O‐n‐C_mH_2m+1, m = 8, 12, 16) side chains were prepared in thin films by polymerization of pyromellitic dianhydride (PMDA) with N,N′‐bis(4‐aminophenyl)‐5‐(n‐alkyloxy)isophthalamides (m‐DAs) obtained from N,N′‐bis(4‐nitrophenyl)‐5‐(n‐alkyloxy)isophthalamides (m‐DNs). The m‐PAI films were tough, flexible and transparent with inherent viscosities in the 1.25–1.67 dL/g range in DMAc and soluble in DMAc and NMP on heating. In TGA m‐PAIs began to degrade around 440°C and in DSC no phase transitions were detected. In X‐ray diffractometry the m‐PAIs appeared amorphous with loosely developed layered crystalline structure. In liquid crystal (LC)‐aligning performance measured using 4‐n‐pentyl‐4′‐cyanobiphenyl (5CB) on thin film surfaces rubbed with standard velvet fibers, the m‐PAIs showed homogeneous LC alignment parallel to the rubbing direction with 2.5–17.5° pretilt angles, depending on the rubbing density and n‐alkyloxy side chain length. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Improving the flame‐retardant efficiency of aluminum hydroxide with fullerene for high‐density polyethylene

The influence of fullerene (C₆₀) on the flame retardancy and thermal stability of high‐density polyethylene (HDPE)/aluminum hydroxide (ATH) composites was studied. After the addition of three portions of C₆₀ to an HDPE–ATH (mass ratio = 100:120) composite, a V‐0 rating in the UL‐94 vertical combustion test was achieved, and the limiting oxygen index increased by about 2%. The results of cone testing also showed that the addition of C₆₀ effectively extended the time to ignition and the time to maximum heat‐release rate while cutting down the peak heat‐release rate. Thus, fewer flame retardants were needed to achieve a satisfactory flame retardance. Consequently, the adverse effects on the mechanical properties because of the high level of flame‐retardant loading was reduced, as evidenced by the obvious enhancements in the tensile strength, elongation at break, and flexural strength. Electron spin resonance spectroscopy proved that C₆₀ was an efficient free‐radical scavenger toward HO· radicals. Thermogravimetric analysis coupled to Fourier transform infrared spectroscopy demonstrated that in both N₂ and air atmospheres, C₆₀ increased the onset temperature of the matrix by about 10 °C because of its enormous capacity to absorb free radicals evolved from the degradation of the matrix to form crosslinked network, which was covered by aluminum oxide. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44551.     

Thermally and magnetically dual‐responsive mesoporous silica nanospheres: preparation,characterization, and properties for the controlled release of sophoridine

Novel thermally and magnetically dual‐responsive mesoporous silica nanoparticles [magnetic mesoporous silica nanospheres (M‐MSNs)–poly(N‐isopropyl acrylamide) (PNIPAAm)] were developed with magnetic iron oxide (Fe₃O₄) nanoparticles as the core, mesoporous silica nanoparticles as the sandwiched layer, and thermally responsive polymers (PNIPAAm) as the outer shell. M‐MSN–PNIPAAm was initially used to control the release of sophoridine. The characteristics of M‐MSN–PNIPAAm were investigated by transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetry, N₂ adsorption–desorption isotherms, and vibrating specimen magnetometry analyses. The results indicate that the Fe₃O₄ nanoparticles were incorporated into the M‐MSNs, and PNIPAAm was grafted onto the surface of the M‐MSNs via precipitation polymerization. The obtained M‐MSN–PNIPAAm possessed superparamagnetic characteristics with a high surface area (292.44 m²/g), large pore volume (0.246 mL/g), and large mesoporous pore size (2.18 nm). Sophoridine was used as a drug model to investigate the loading and release properties at different temperatures. The results demonstrate that the PNIPAAm layers on the surface of M‐MSN–PNIPAAm effectively regulated the uptake and release of sophoridine. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40477.