Synergistic effect of aluminum hydroxide and expandable graphite on the flame retardancy of polyisocyanurate–polyurethane foams

For the first time, expandable graphite (EG) and aluminum hydroxide (ATH) was combined to improve the flame retardancy of polyisocyanurate–polyurethane (PIR–PUR) foam. The limited oxygen index increased from 26.5 for the PIR–PUR matrix to an incredible value of 92.8 when 24 phr (parts per 100 of matrix) EG and 60 phr ATH were incorporated into the matrix. Based on morphology observation and thermogravimetric analysis, it was speculated that two factors contributed to the improvement of flame retardancy primarily. First, ATH could effectively induce “villi” like particles, which was useful to form a dense char. The compact char layer could effectively impede the transport of bubbles and heat. Second, ATH and EG accelerated the initial degradation and fluffy char was quickly generated on the surface of the composites. Thus, the degradation of the composite was slowed down and the diffusion of volatile combustible fragments to flame zone was delayed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39936.     

Expandable graphite encapsulated by magnesium hydroxide nanosheets as an intumescent flame retardant for rigid polyurethane foams

Encapsulation of expandable graphite (EG) particles by organic or inorganic shells has been proved to efficiently enhance the expandability of EG, and thus to improve the flame‐retardant efficiency of EG. In this study, magnesium hydroxide (MH) nanosheets were utilized to fabricate core–shell EG@MH flame‐retardant particles through a heterocoagulation method. It was observed that after the encapsulation by MH nanosheets, the edges of the char residue of the EG layer were sealed after combustion, which contributed to the enhancement of expandability. The expansion volume of EG@MH increased dramatically to 456 mL/g, in contrast to 338 mL/g for pure EG. By incorporating 11.5 wt % of flame‐retardant particles, polyurethane foam containing EG@MH (here PU‐EG@MH) displayed excellent flame retardancy. Compared with the physically mixed sample, PU‐EG+MH, the limiting oxygen index value for the PU‐EG@MH sample increased from 29.8% to 32.6%. Furthermore, the shell of MH nanosheets was beneficial for improving the interfacial adherence between EG and the rigid polyurethane foam (RPUF) matrix, due to the reaction between isocyanate functional groups and MH. The cell structure and storage modulus of PU‐EG@MH were improved. In other words, the shell of MH nanosheets successfully improved the flame‐retardant efficiency and enhanced the interface adhesion between EG and the matrix. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46749.     

Addition flame‐retardant effect of nonreactive phosphonate and expandable graphite in rigid polyurethane foams

A series of flame‐retardant rigid polyurethane foams (RPUFs) containing nonreactive phosphonate (5‐ethyl‐2‐methyl‐1,3,2‐dioxaphosphorinan‐5‐yl) methyl dimethyl phosphonate P‐oxide (EMD) and expandable graphite (EG) were prepared by water blown. The flame‐retardant properties and mechanism of EMD/EG on RPUFs were systematically investigated. The EMD/EG system effectively increased the limiting oxygen index (LOI) value and decreased the values of total heat release (THR), av‐effective heat of combustion (EHC), pk‐heat release rate (HRR), total smoke release (TSR) of RPUFs. The impact values of LOI, THR, and av‐EHC resulted by EMD/EG system are nearly equal to the sum of the impact values by EMD and EG individually in RPUFs, which implies the addition flame‐retardant effect from EMD and EG. EMD alone exerted excellent gas‐phase flame‐retardant effect by releasing PO fragments with quenching effect. The firm residue produced by EMD combined well with the loose and worm‐like expanded graphite from EG further to form compact and expanded char layer, which brought excellent barrier effect and filtration effect to matrix. That's why pk‐HRR and TSR values of RPUF reduced. Depending on the simultaneous actions of EMD/EG system in gas phase and condensed phase during combustion, the flame‐retardant effects from nonreactive phosphonate and EG on RPUFs were added together. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45960.     

Thermal and fire behavior of isophorone diisocyanate based polyurethane foams containing conventional flame retardants

This work reports on the fire behavior of isophorone diisocyanate‐based polyurethane foams containing different conventional flame retardants (FRs) such as melamine, ammonium polyphosphate, aluminum hydroxide, expandable graphite, and their combinations. The foams were obtained in a laboratory scale and characterized in terms of their morphology, density, thermal stability, and fire behavior. According to atomic force microscopy, the incorporation of FRs decreased the phase separated domain size. The cellular structure of the foams was examined qualitatively by scanning electron microscopy while the quantitative analysis of the surrounding skin was performed by optical microscopy and Image J. The FR containing foams showed more and smaller cells. The thermogravimetric analysis showed that the FRs had no influence in the initial degradation temperature of the foams. However, the obtained residue values were higher than the theoretical ones, indicating that there was some type of interaction between the FRs and the foams. The fire behavior of polyurethane foams was studied by the cone calorimeter and the data showed that the introduction of expandable graphite and combinations of ammonium polyphosphate/melamine to the reference foam gave rise to a significant reduction in the total heat release. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45944.     

Flame retardation and thermal stability of novel phosphoramide/expandable graphite in rigid polyurethane foam

A novel flame retardant named diethylene N,N',N''‐tri (diethoxy)phosphoramide (DTP) was synthesized using diethyl phosphate and diethylenetriamine via Atherton–Todd reaction. Then, series of flame‐retardant water‐blown rigid polyurethane foams (RPUFs) with expandable graphite (EG) and DTP were prepared through box‐foaming. The results of thermogravimetric analysis showed that DTP/EG changed thermal degradation process of RPUF and promoted enhancing char residues. The complex flame‐retardant system (EG/DTP) endowed RPUF higher limiting oxygen index (LOI) values (29.1%–30.2%) and lower heat release rate peak (PHRR) values according to LOI and microscale combustion calorimeter tests. More importantly, the synergistic flame‐retardant effect between EG and DTP in RPUF was proved by the analysis of synergistic effectivity values. Based on the analysis of cone calorimetric tests, EG/DTP revealed remarkable effects to inhibit the fire intensity and smoke release of RPUF with decreased PHRR and total smoke production due to good char‐forming action. To further investigate the char‐residues of the foams after combustion, scanning electron microscope and energy dispersive X‐ray spectroscopy analyses were conducted. The results suggested that EG/DTP flame‐retardant system promoted RPUF forming a compact, continuous and phosphorus‐rich char layer as a good fire barrier in combustion. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46434.     

Phosphorus‐containing silica gel‐coated ammonium polyphosphate: Preparation,characterization, and its effect on the flame retardancy of rigid polyurethane foam

A phosphorus‐containing silica gel was synthesized via a reaction between phenyl dichlorophosphate, poly(ether polyol), and γ‐aminopropyltriethoxysilane. Ammonium polyphosphate (APP) was modified by the synthesized phosphorus‐containing silica gel (MAPP) and then incorporated into the rigid polyurethane foam (PU). Results showed that APP had a smaller particle size, lower initial decomposition temperature, better heat resistance at high temperature, and better compatibility with PU matrix after the modification. The cone calorimeter test results showed that the incorporation of MAPP obviously reduced the values including peak of heat release rate, total heat release, average effective heat of combustion, and total smoke release, and increased the char yield of PU composite comparing with APP. The improved flame retardancy of PU/MAPP composite was attributed to the quenching effect of PO· and PO₂· free radicals released by MAPP in the early stage and the improved thermal stability of phosphorus‐ and silicon‐containing char layer formed in the later stage. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46334.     

Intrinsic flame retardancy of poly(lactic acid) bead foams

Linear economy models are no longer acceptable for the plastic industry and a change to a sustainable circular plastic economy must take place. In the field of thermoplastic foams, the biopolymer poly(lactic acid) (PLA) is a suitable alternative for fossil based foams like polystyrene. However, the production of PLA bead foams is still a challenge. In regards to circular plastic economy products, a reduction of the needed polymer additives is aspired to simplify the union of end-of-life plastic streams. Flame retardants (FR) are required in many applications and are often the largest proportion of additives. It turns out that the removal of FRs, for example the removal of the REACh registered FR hexabromocyclododecane for polystyrene foams, requires a great effort. This paper shows that PLA bead foams require no FR to achieve a class E classification for construction products. Therefore, nine PLA types are analyzed by differential scanning calorimetry, thermogravimetric analysis, gel permeation chromatography, and rheotens measurements. From five types, PLA bead foams could be produced with two different densities. In addition, PLA bead foams containing 1.5 wt% alkoxy amine FR were produced. The flammability of the PLA bead foams was investigated by LOI, DIN-4102-1-B2, and cone calorimeter tests.     

Enhanced fire behavior of rigid polyurethane foam by intumescent flame retardants

Using expandable graphite (EG) and ammonium polyphosphate (APP) as flame retardants, we prepared two series of polyisocyanurate–polyurethane (PIR–PUR) foams (i.e., EG foams filled with different amounts of EG alone and APEG foams containing different amounts of expanded EG and APP) and evaluated the effect of the additives on the physical–mechanical property, fire behavior and thermal stability of the foams based on compressive strength test, limiting oxygen index (LOI), cone calorimeter test, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The addition of EG alone or both EG and APP into the foam greatly influences the physical–mechanical property. The compressive strength of APEG foams is closely related to the apparent density. The LOI value showed good improvement in both EG and APEG foams. The addition of APP in APEG foams gave better fire behavior than the EG foams with an obvious decrease in PHRR and increase in residue. In addition, the TGA curves illustrated that APP might be an effective charring agent to promote char formation. The SEM results showed that the incorporation of APP and EG allowed the formation of a cohesive and dense char layer, which inhibited the transfer of heat and combustible gas and increased the thermal stability of PIR‐PUR. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of surface‐modified ammonium polyphosphate and its effect on the flame retardancy of rigid polyurethane foam

A functional surface‐modification agent was synthesized via a reaction between hexachlorocyclotriphosphazene and γ‐aminopropyl triethoxysilane. Ammonium polyphosphate (APP) was modified with this agent and then incorporated into a rigid polyurethane foam (RPUF). Fourier transform infrared spectroscopy, ¹H‐NMR, and X‐ray photoelectron spectroscopy were used to characterize the modified ammonium polyphosphate (M‐APP). The results show that the dispersibility was improved and the particle size decreased after the modification. The limiting oxygen index and cone calorimetry test results show that M‐APP enhanced the flame‐retardant properties of RPUF. The peak heat‐release rate of polyurethane (PU)/20% M‐APP decreased by 51.18% compared with that of PU–APP. The scanning electron microscopy results illustrate that M‐APP facilitated the formation of intumescent and compact char. The excellent flame‐retardant performance of M‐APP resulted from the flame‐inhibition and barrier effects, which were attributed to the phosphazene group and the intumescent char, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45369.     

Synergistic effect of expandable graphite and α‐type zirconium phosphate on flame retardancy of polyurethane elastomer

Organically modified zirconium phosphate (OZrP) was prepared by cation exchange of natural counterions with hexadecyltri‐n‐butylphosphonium bromide. Subsequently, OZrP and expandable graphite (EG) were incorporated into polyurethane elastomer (PUE), and the thermal stability and flame retardancy of PUE composites were investigated. The thermogravimetric analysis indicated that partial substitution of EG with OZrP could improve both the thermal stability and char yield of PUE composites. The cone calorimetry and limiting oxygen index test showed that partial substitution of EG with OZrP could further enhance the flame retardancy of PUE composites and presented an excellent synergistic effect. Moreover, the char residue of PUE composites was analyzed by X‐ray photoelectron spectroscopy and laser Raman spectroscopy. Their results indicated that the synergistic effect of the physical barrier to prevent transmission of heat and mass between condensed and gas phases. Therefore, the further combustion of the nether material could be inhibited, which created better flame retardancy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45188.     

Synergistic effects of hydroxides and dimethyl methylphosphonate on rigid halogen‐free and flame‐retarding polyurethane foams

Rigid halogen‐free and flame‐retarding polyurethane foams are prepared with aluminum hydroxide, brucite, and DMMP. The effects of the hydroxides and DMMP on the foaming process and flame retarding properties of the foams are investigated by thermo gravimetric analysis, limiting oxygen index, and X‐ray powder diffraction. The thermal stability of the rigid polyurethane foams is close to that of the hydroxide fillers, with aluminum hydroxide providing better flammability performance than brucite. The hydroxide fillers and DMMP play a synergistic role in the rigid polyurethane foams and the limiting oxygen indices are up to 28.4% and 32.4%, respectively. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of gas-condensed phase synergistic system of 9,10-dihydro-9-oxo-10-phosphaphenanthrene-10-oxide and polydopamine on flame retardancy of epoxy resin

Polydopamine (PDA) was prepared by using dopamine which has good charring ability. The PDA was used as an environmentally friendly flame retardant and combined with 9,10-dihydro-9-oxo-10-phosphaphenanthrene-10-oxide (DOPO) to improve the flame retardancy of epoxy (EP) resin. The flame retardancy and thermal stability of EP composites were researched by UL-94 vertical burning, limiting oxygen index (LOI), cone calorimetry tests, and thermal gravimetric analyzer. Adding DOPO alone requires 6% to make EP obtain the UL-94 V0. If DOPO and PDA are combined, only 4% is needed to make EP obtain the UL-94 V0, which suggests that there is good synergistic effect between them. Moreover, the peak of heat release rate of EP/DOPO/PDA composites is less than that of EP/DOPO composites. The reactions among EP, DOPO, and PDA reduce the release of combustible gases at the early stage of degradation; at the same time, DOPO volatilize to the gas phase, quench the free radicals, and the combustion can be stopped. In addition, due to the decrease of the amount of PDA/DOPO, the EP composite can get a higher glass transition temperature, but due to the aggregation of PDA in EP, the tensile property of EP composite decreases.     

Flame retardancy of ceramic-based rigid polyurethane foam composites

In this work, ceramic fillers zirconia and alumina powder were incorporated in the rigid polyurethane foams derived from modified castor oil and their impact on the mechanical, thermal, and fire performances of composite foams have been analyzed. It was observed that the addition of ceramic filler showed improved mechanical and thermal properties and best properties were shown by 6% zirconia with compressive strength of 6.61 MPa and flexural strength of 5.72 MPa. Zirconia also demonstrated an increase in T_5% up to 260 °C. Cone calorimetry shows a decrease in peak of heat release from 118 to 84 kW m⁻² and 94 kW m⁻² by the incorporation of alumina and zirconia powder, respectively. Furthermore, total heat release (THR), smoke production rate (SPR), and total smoke release (TSR) were also found to decrease remarkably on the incorporation of ceramic fillers. So, these fillers have a great potential as an additive to incorporate good mechanical, thermal, and fire properties in bio-based rigid PU foams. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48250.     

Effects of expandable graphite and dimethyl methylphosphonate on mechanical,thermal, and flame‐retardant properties of flexible polyurethane foams

Expandable graphite (EG) and dimethyl methylphosphonate (DMMP) were added to polyurethane to form flame‐retardant high‐resilience flexible polyurethane foam (FPUF) in one‐step. The effects of EG and DMMP on cell morphology, mechanical properties, dynamic mechanical properties, thermal degradation, and flame‐retardant properties of FPUF were studied. The results indicated that adding proper amount EG or/and DMMP would not seriously damage cell morphology and mechanical properties. Dynamic mechanical analysis (DMA) demonstrated that there were two tan δ peaks attributed to soft and hard segment seperately and 15 pbw EG or/and 15 pbw DMMP could enhance damping property of FPUF. Thermogravimetric analysis–Fourier transform infrared spectroscopy (TGA–FTIR) results indicated that 15 pbw EG or 15 pbw DMMP could improve the thermal stability of the second degradation step but there were no synergistic effect between the two. DMMP made FPUF composites produce more toxic gases such as CO, however, EG displayed an opposite effect. Both EG and DMMP could effectively improve the flame retardant properties of FPUF, and there was synergistic effect between the two. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 916‐926, 2013     

Thermal degradation kinetics of rigid polyurethane foams blown with water

The thermal decomposition behavior of rigid polyurethane foams blown with water was studied by dynamic thermogravimetric analysis (TGA) in both nitrogen and air atmosphere at several heating rates ranging from room temperature to 800°C. The kinetic parameters, such as activation energy (E), degradation order (n), and pre‐exponential factor (A) were calculated by three single heating rate techniques of Friedman, Chang, and Coats–Redfern, respectively. Compared with the decomposition process in nitrogen, the decomposition of foams in air exhibits two distinct weight loss stages. The decomposition in nitrogen has the same mechanism as the first stage weight loss in air, but the second decomposition stage in air appears to be dominated by the thermo‐oxidative degradation. The heating rates have insignificant effect on the kinetic parameters except that the kinetic parameters at 5°C/min have higher values in nitrogen and lower values in air, indicating different degradation kinetics in nitrogen and air. The kinetic parameters of foam samples blown with different water level in formulation decline firstly and then increase when water level increases from 3.0 to 7.0 pph. According to the prediction for lifetime and half‐life time of foams, water‐blown rigid foams have excellent thermostability, when used as insulation materials below 100°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4149–4156, 2006     

Reactive flame retardant with core‐shell structure and its flame retardancy in rigid polyurethane foam

With a shell of poly (methyl methacrylate‐co‐hydroxyl ethyl acrylate) (PMMA‐HA), microencapsulated ammonium polyphosphate (MHAPP) is prepared by in situ polymerization. The core‐shell structure of the reactive flame retardant (FR) is characterized by Fourier transform infrared (FTIR) and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS). The results of water leaching rate and water contact angle measurements show that ammonium polyphosphate (APP) is well coated by a hydrophobic shell. Due to the presence of active groups (–OH) and hydrophobic groups (–CH₃) in shell, MHAPP exhibits better compatibility, flame retardancy, and water resistance compared with neat ammonium polyphosphate (APP) in rigid polyurethane foam (PU). Compression strength of PU/MHAPP with suitable loading is higher than that of PU/APP and PU, the reason is that the active groups in shell can improve the compatibility of MHAPP in PU composite. From thermal stability and residue analysis, it can be seen that the presence of reactive flame retardant shows positive effect on thermal stability of PU composite at high temperature, results also indicate that MHAPP can promote the carbonization formation efficiency of PU composite during combustion process compared with APP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42800.     

Flame retardancy of hollow glass microsphere/rigid polyurethane foams in the presence of expandable graphite

Rigid polyurethane foams (RPUF) filled with various loadings of expandable graphite (EG) or/and hollow glass microspheres (HGM) were prepared by cast molding. The flame retardant properties of these composites were investigated by limiting oxygen index (LOI), horizontal and vertical burning tests. The composite with 10 wt % HGM and 20 wt % EG had the best flame retardant properties, and its LOI value reached 30 vol %. The addition of an appropriate loading of HGM improved the compressive strength and modulus of RPUF and EG/RPUF. When the HGM content arrived at 10 wt %, the compressive strength and modulus of the composites reached the maximum value. The dynamical mechanical analysis (DMA) showed that the addition of EG and HGM made the glass transition temperature shift to a higher temperature, and 10 wt % EG and 10 wt % HGM filled RPUF had the highest storage modulus. The scanning electronic microscope (SEM) observation indicates that the additives led to the decrease in the cell size. In addition, the flame retardant mechanism, the thermal properties, the burned surfaces and the interface surfaces were elucidated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synergistic effects of magnesium oxysulte whisker and multiwalled carbon nanotube on flame retardancy,smoke suppression,and thermal properties of polypropylene

In this work, multiwalled carbon nanotube (MWCNT)-modified magnesium oxysulfate whisker (MOSw) (MOSw-MWCNT) is successfully synthesized via a facial hydrothermal method. MWCNT is bonded on the surface of MOSw via a bidentate bridging mode of the carboxylate ligation without changing their crystal structures. Then MOSw-MWCNT is incorporated into polypropylene (PP) matrix to prepare series of PP/MOSw-MWCNT composites via melt blending. Cone calorimetry test, horizontal and vertical test, and limit oxygen index (LOI) results all show a significant synergistic effect of MOSw and MWCNT on flame-retardant PP. PP/7MOSw-3MWCNT composite exhibits the lowest peak heat release rate, total heat release, peak smoke production rate, total smoke production, and burning speed of 332.3 kW/m², 87.4 MJ/m², 0.0212 m²/s, 47.7 m² and 23.2 mm/min, respectively. The LOI value of PP/7MOSw-3MWCNT composite is increased to 23.1% from 18.0% of neat PP. The scanning electron microscopy and Raman spectra of residue char indicate that the degree of graphitization and compactness of the residue char are increased with the amount of MWCNT. The introduction of MOSw and MWCNT both improves the thermal stability of PP matrix, but the excess MWCNT leads to the decomposition of the unstable residue char since its excellent thermal conductivity.     

Intrinsically flame retarded foams based on melamine − formaldehyde condensates: thermal and mechanical properties

Two kinds of foam based on melamine ? formaldehyde (MF ) condensates (PVA /MF (PVA , polyvinyl alcohol), PVA /APTES /MF (APTES , 3‐triethoxysilylpropylamine)) were prepared by chemical modification. Pure MF foam has the serious disadvantage that it is very hard and brittle, breaks easily and crumbles when handled. After modification, PVA /MF and PVA /APTES /MF display excellent resilience. The structures of the foams were characterized by Fourier transform infrared (FTIR ), SEM and XRD . XRD data indicate that modifiers hinder the crystallization of MF , which might contribute to the improvement of resilience. Flame retardancy of the foams was characterized by limiting oxygen index testing, and the thermal degradation behavior was studied using TGA . The mode of flame retardant action is suggested by gaseous and solid phase analysis. TGA‐FTIR results demonstrate that the sublimation of the melamine of MF and foams based on MF occurs during thermal decomposition, which contributes to the high flame retardancy. © 2016 Society of Chemical Industry     

Intumescent foams—A novel flame retardant system for flexible polyurethane foams

A combination of intumescent components was evaluated as a novel flame retardant system in a flexible polyurethane foam, and the incorporation of these components gave rise to a significant enhancement of the flame retardant properties of the foam. The heat release rate was lowered at an early stage as well as throughout the fire, the total heat production was decreased and the time to ignition was prolonged. Mechanical measurements of the foam revealed enhanced properties in terms of stiffness accompanied by a large decrease in elongation at break as compared with a reference foam. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008