A new stereo pentablock copolymer consisting of poly(l ‐lactide) (PLLA: A), poly‐d ‐lactide (PDLA: B), and poly(butylene succinate) (PBS: C) is synthesized by two‐step ring‐opening polymerization of d ‐ and l ‐lactides in the presence of bis‐hydroxyl‐terminated PBS prepolymer that has been prepared by the ordinary polycondensation. The pentablock copolymers (PLLA‐PDLA‐PBS‐PDLA‐PLLA) as well as the triblock copolymers (PLLA‐PBS‐PLLA) obtained as the intermediates show different properties depending on the polymer compositions. In the pentablock copolymers, the direct connection of the PLLA and PDLA blocks allows easy formation of the stereocomplex crystals, while the introduction of the semicrystalline PBS block is effective not only for changing the crystallization kinetics but also for imparting an elastomeric property.
The effects of the molecular weight of poly(D ‐lactic acid) (PDLA), which forms stereocomplex (SC) crystallites with poly(L ‐lactic acid) (PLLA), and those of processing temperature Tp on the acceleration (or nucleation) of PLLA homocrystallization were investigated using PLLA films containing 10 wt% PDLA with number‐average molecular weight (Mn) values of 5.47 × 105, 9.67 × 104 and 3.67 × 104 g mol–1 (PDLA‐H, PDLA‐M and PDLA‐L, respectively). For the PLLA/PDLA‐H and PLLA/PDLA‐M films, the SC crystallites that were ‘non’‐melted and those that were ‘completely’ melted at Tp values just above their endset melting temperature and recrystallized during cooling were found to act as effective accelerating (or nucleation) agents for PLLA homocrystallization. In contrast, SC crystallites formed from PDLA‐L, having the lowest Mn, were effective accelerating agents without any restrictions on Tp. In this case, the accelerating effects can be attributed to the plasticizer effect of PDLA‐L with the lowest Mn. The accelerating effects of SC crystallites in the PLLA/PDLA‐H and PLLA/PDLA‐M films was dependent on crystalline thickness for Tp values below the melting peak temperature of SC crystallites, whereas for Tp values above the melting peak temperature the accelerating effects are suggested to be affected by the interaction between the SC crystalline regions and PLLA amorphous regions. 相似文献
Toughening modification of poly(l -lactide) (PLLA) with rubber particles is often realized at the cost of transparency, mechanical strength, and modulus because high rubber loadings are generally required for toughening. In this work, a promising strategy to simultaneously improve the transparency and stiffness–toughness performance of poly(butyl acrylate)-poly(methyl methacrylate) (BAMMA) core-shell rubber nanoparticles toughened PLLA blends by utilizing the stereocomplex (SC) crystallization between PLLA and poly(d -lactide) (PDLA) is devised. The results reveal that the construction of SC crystallites in PLLA matrix via melt-mixing PLLA/BAMMA blends with PDLA can prevent BAMMA nanoparticles from aggregation and promote them to form network-like structure at lower contents. As a result, not only higher toughening efficiency with less rubber contents but also superior transparency is achieved in the PLLA/PDLA/BAMMA blends as compared with the PLLA/BAMMA ones where large aggregated BAMMA clusters are formed. Moreover, the outstanding reinforcement of SC crystallites network for PLLA can impart an enhanced tensile strength and modulus to PLLA/PDLA/BAMMA blends, thus improving the stiffness–toughness performance of PLLA/PDLA/BAMMA blends to a higher degree. This work demonstrates that SC crystallization is a promising solution to solve the contradiction between transparency and mechanical properties and then obtain superior comprehensive performances in rubber toughened PLLA blends. 相似文献
Star-shaped 4-armed stereo diblock poly(lactide)s with the core/shell types of poly(d-lactide) (PDLA)/poly(l-lactide) (PLLA) and PLLA/PDLA (abbreviated as 4-DL and 4-LD, respectively) and the number-average molecular weights of about 1 × 104 g mol−1 were synthesized and the crystallization behavior of neat 4-DL, 4-LD, and their 50/50 blend (abbreviated as 4-DL/4-LD blend) was investigated. Solely stereocomplex (SC) crystallites as crystalline species were formed in the neat 4-DL, 4-LD, and 4-DL/4-LD blend, irrespective of crystallization temperature (100–160 °C). The overall SC crystallization of 4-DL/4-LD blend was highly accelerated compared with that of neat 4-DL and 4-LD, due to the largely elevated spherulite nuclei number per unit mass in the blend. Such high density of nuclei formation in 4-DL/4-LD blend is attributable to the facile intermolecular interaction and subsequent SC nucleation between the PLLA shell of 4-DL and the PDLA shell of 4-LD. The blending method reported in the present study is applicable for various core/shell types of star-shaped stereo diblock stereocomplexationable polymers to accelerate overall SC crystallization and can counterbalance the lowered crystallization rate caused by the star-shaped architecture. Despite the highly accelerated overall SC crystallization of 4-DL/4-LD blend by blending 4-DL and 4-LD, the spherulite growth rate, induction period for spherulite growth, final crystallinity, crystalline species, growth morphology, and crystallization mechanism were not altered by blending 4-DL and 4-LD. 相似文献
Branched poly(lactide)(PLA)s with various lengths of graft chain were synthesized by ring-opening polymerization of l- or d-lactide (l- or d-LA) in bulk using polyglycidol as a macroinitiator. The properties of polymer films of branched PLLA or PDLA obtained and their stereocomplex were investigated through thermal analysis and tensile testing. The branched PLLA or PDLA film exhibited a lower glass transition temperature (Tg), melting temperature (Tm), crystallinity, Young's modulus and a higher strain at break than the corresponding linear PLLA or PDLA film. The branched PLLA/branched PDLA stereocomplex film showed a high maximum stress and a high Young's modulus keeping its high strain at break. Moreover, the usefulness of branched PLLA or PDLA as a plasticizer of linear PLLA was investigated with 1:9 blend or stereocomplex film prepared from the branched PLLA or branched PDLA and linear PLLA. The blend or linear PLLA/branched PDLA stereocomplex film showed a higher strain at break compared with linear PLLA film. The mechanical properties of the blend or linear PLLA/branched PDLA stereocomplex film could easily be controlled by changing the molecular weight of branched PLA. 相似文献
Stereo diblock polylactides (SDB‐PLAs) composed of relatively short poly(d ‐lactide) (PDLA) segments and relatively long poly(l ‐lactide) (PLLA) segments were synthesized to have a wide number‐average molecular weight (Mn) range of 2.5 × 104–2.0 × 105 g mol?1 and d ‐lactyl unit content of 0.9–38.6%. The effects of incorporated short PDLA segments (Mn = 2.0 × 103–7.7 × 103 g mol?1) on crystallization behavior of the SDB‐PLAs were first investigated during heating after complete melting and quenching or during slow cooling after complete melting. Stereocomplex (SC) crystallites can be formed at d ‐lactyl unit content as low as 4.3 and 5.8% for heating and slow cooling, respectively, and for Mn of PDLA segments as low as 2.0 × 103 and 3.5 × 103 g mol?1, respectively. With decreasing Mn and increasing d ‐lactyl unit content, the cold crystallization temperature during heating decreased and the crystallization temperature during slow cooling increased. With increasing d ‐lactyl unit content, the melting enthalpy (ΔHm) of SC crystallites during heating and the crystallinity (Xc) of SC crystallites after slow cooling increased, whereas ΔHm of PLLA homo‐crystallites during heating and Xc of PLLA homo‐crystallites after slow cooling decreased. The total ΔHm of SC crystallites and PLLA homo‐crystallites during heating and the total Xc after slow cooling became a minimum at d ‐lactyl unit content of 10–15% and gave a maximum at d ‐lactyl unit content of 0%. Despite the accelerated crystallization of some of SDB‐PLAs, the low values of total ΔHm and Xc at d ‐lactyl unit content of 10–15% are attributable to the formation of two crystalline species of SC crystallites and PLLA homo‐crystallites. 相似文献