壳聚糖聚乙烯醇复合载药微球的制备

以壳聚糖(CS)为基质,通过聚乙烯醇(PVA)的引入制备壳聚糖聚乙烯醇复合载体可以分别采用室温和高温酸催化反应两种方法制备出释药性能和结构形态不同的两种复合载药微球Ⅰ和Ⅱ。其中壳聚糖/聚乙烯醇复合载药微球Ⅰ的制备工艺是调节壳聚糖和聚乙烯醇质量比6/5,复合微球Ⅰ的平均粒径1～20μm,载药量13%,LVFX体外12h累积释放80%。而壳聚糖/聚乙烯醇复合载药微球Ⅱ的平均粒径1.69μm,载药量17.1%,LVFX体外6hr基本完全释放。     

大蒜素/海藻酸钠/明胶/壳聚糖复合微球的制备及性能

以大蒜素为模型药物,采用复凝聚法制备了海藻酸钠/明胶/壳聚糖复合微球,考察了不同条件对微球溶胀性、载药性能和缓释性能等指标的影响。结果表明,明胶和海藻酸钠(质量比为1∶3)为2%,大蒜素投入量与混合胶比为1∶2时,制备的载药微球(DSGCM)外形规则,粒径分布在0.8~0.9mm之间,载药量为24.3%,包封率为69.4%,复合微球具有p H敏感性,在p H=7.4介质中微球溶胀率达到450%,药物释放过程符合Higuchi方程,明胶的加入可以延缓DSGCM复合微球的药物释放性能。     

乳化法制备海藻酸钙/聚组氮酸微胶囊

采用乳化法制备海藻酸钙微球及海藻酸钙/聚组氨酸载药微胶囊,并考察不同海藻酸钠浓度、氯化钙浓度对微球表面形态、粒径分布、载药性能及微胶囊控制释放性能的影响。结果表明海藻酸钠浓度主要影响微球的粒径大小,氯化钙浓度主要影响微球的分散程度及粒径分布,微球载药量均随海藻酸钠浓度及氯化钙浓度的增加而减小,所制备的微胶囊均无明显的突释现象。     

负载丝裂霉素C的明胶多孔支架制备及释放

采用单乳化溶剂挥发法制备负载MMC的PLGA微球,通过相分离与冷冻干燥,制备含有载药微球的明胶多孔支架。支架的孔隙率达到90.2%,溶胀率为22.7%,压缩模量为52.1kPa。体外释放实验表明,载药微球中,MMC在5周的累计释放量为77.3%;支架中MMC的释放相对较缓,5周累积释放量为65.2%。这种含有载药微球的明胶复合多孔支架具有潜在的抗瘢痕应用前景。     

快速膜乳化法制备载紫杉醇聚乳酸类微球

采用快速膜乳化法、均质乳化法和超声法制备了聚乳酸(PLA)空白微球,比较了3种方法所制微球的均一性.采用均质乳化法和超声法制备的PLA微球平均粒径分别为1.022和0.987μm,多分散系数分别为0.133和0.145,而快速膜乳化法制备的PLA微球平均粒径为0.906μm,多分散系数为0.005.在此基础上,采用快速膜乳化法制备了聚乳酸、聚(乳酸-羟基乙酸)共聚物(PLGA)和聚(乳酸-聚乙二醇)二嵌段共聚物(PELA)载紫杉醇微球,平均粒径分别为0.906,0.987和1.015μm,多分散系数均为0.005,载药率分别为3.89%,4.93%和3.18%,包埋率分别为63.2%,71.6%和51.3%,在磷酸盐缓冲液中释放60d后,PLGA微球的药物释放率为83.87%,PLA微球为50.25%,PELA微球为41.27%.     

羧甲基壳聚糖-蓖麻油基聚氨酯农药缓释微球的制备及性能

以羧甲基壳聚糖（CMCS）、蓖麻油（CO）和异佛尔酮二异氰酸酯（IPDI）为原料,自乳化法制备了羧甲基壳聚糖-蓖麻油基聚氨酯微球（CO-CMCS-PU）,通过分子自组装法负载阿维菌素（AVM）得到载药微球（CO-CMCS-PU@AVM）。采用FTIR、1HNMR、SEM、TGA等对产品结构及形貌进行表征,并探究了不同药量载药微球的包封率、缓释性能、抗紫外性能、叶面接触角和黏附性能。结果表明,相比AVM分散液,紫外照射后载药微球中AVM的保留率提高到43%,说明CO-CMCS-PU载体的抗紫外性能良好;载药微球比AVM分散液在黄瓜叶面上的接触角降低了20%以上,滞留量提高了40%以上,说明其在叶面上有较好的黏附性和润湿性;载药微球包封率可达80%以上,具有良好的缓释和pH响应释放性能,释药行为符合First-order动力学模型,药物释放受Fickian扩散控制。     

5-氟尿嘧啶/明胶纳米载药微球的制备及体外性能研究

目的：以5-氟尿嘧啶(5-FU)为模型药物,明胶为载体材料,制备5-氟尿嘧啶/明胶纳米载药微球,探究药物的缓释效果和抗肿瘤性能。方法：“单凝聚相法”制备明胶纳米载药微球;透射电镜（TEM）和粒径分析仪（DLS）分析纳米微球的形貌、粒径分布情况;计算其包封率和载药量,并对其体外缓释效果和抗肿瘤性能进行研究。结果：明胶纳米微球的表面形态良好,分散均一,平均粒径65.1?2.1 nm,明胶纳米微球的包封率为23.5?1.9 %,载药量为69.7?0.5 %;明胶微球具有良好的缓释性能,Higuchi方程对微球的体外药物释放情况拟合度较高。四甲基偶氮唑蓝实验结果表明,5-FU/明胶微球对胃癌细胞(SGC7901)具有明显的抑制作用。结论：5-FU/明胶微球缓释性好,抗肿瘤活性显著,可作为抗癌药物的缓释制剂。     

丝素-羟丙基壳聚糖微球的结构和释药性能

以胰岛素为目标药物,以丝素(SF)和羟丙基壳聚糖(HPCS)为包药材料,复凝聚法制备SF-HPCS载药微球。采用红外光谱(FTIR)、扫描电镜(SEM)、X射线衍射(XRD)、热重分析(TGA)等对载药微球的结构、外部形貌及热性能等进行了表征。结果表明,所制备的载药微球表面密实,平均粒径22.4μm,呈正态分布;载药微球对胰岛素的包埋率达73.6%,大于HPCS载药微球(64.3%)及壳聚糖(CS)载药微球(57.1%);SF-HPCS载药微球在人工胃液中4h内累计释药率为21.3%,在人工肠液中24h内累计释药率达81.2%,48h累计释药率为92.2%,释放过程平稳、缓慢。     

凹凸棒黏土对壳聚糖/海藻酸钠微球释放性能的影响

将凹凸棒黏土(ATP)与海藻酸钠(SA)进行复合以改善SA的缓释性能。以ATP/SA复合物为球芯材料,壳聚糖(CS)为包覆材料,采用复凝聚法制备凹土/海藻酸钠/壳聚糖复合微球(ASCM),并以双氯芬酸钠(DS)为模型药物,考察了凹土添加量对复合微球溶胀性能、载药性能和缓释性能的影响。结果表明,凹土的加入改善了微球的溶胀性能和缓释性能,而对微球载药性能影响不大。与海藻酸钠/壳聚糖微球(SCM)相比,当复合微球中ATP/SA(w/w)为20%时,其在pH6.8的磷酸缓冲溶液中2 h的累积释放率由58.8%减小到38.7%。复合微球体外释放动力学数据表明,其释药行为可以很好地用一级动力学方程拟合。凹土的加入有效改善了SA的缓释性能,ASCM可作为缓释药物的载体材料。     

小檗碱壳聚糖微球制备及其抗真菌活性测定

采用乳化-化学交联法制备了负载小檗碱的壳聚糖微球. 以正交实验对微球形态、粒径、药物包封率和载药率等指标进行了制备工艺条件优化. 显微镜和电镜观察显示微球球形良好,表面光滑,平均粒径约15 mm,包封率为78.98%,载药率为4.78%. 持续30 d的药物释放实验表明,小檗碱可从微球中缓慢释放. 利用生长速率法测定了微球对3种重要植物病原真菌的抑制作用,5 mg/mL微球对番茄早疫病菌(Alternaria solani)的抑菌率达65%.     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料，介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比，介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序，对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

Inorganic/organic nanocomposite coatings: The next step in coating performance

Inorganic/organic hybrid materials have considerable promise and are beginning to become a major area of research for many coating usages, including abrasion and corrosion resistance. Our primary approach is to prepare the inorganic phase in situ within the film formation process of the organic phase. The inorganic phase is introduced via sol-gel chemistry into a thermosetting organic phase. By this method, the size, periodicity, spatial positioning, and density of the inorganic phase can be controlled. An important aspect of the inorganic/organic hybrid materials is the coupling agent. The initial task of the coupling agent is to provide uniform mixing of the oligomeric organic phase with the sol-gel precursors, which are otherwise immiscible. UV-curable inorganic/organic hybrid systems have the advantages of a rapid cure and the ability to be used on heat sensitive substrates such as molded plastics. Also, it is possible to have better control of the growth of the inorganic phase using UV curing. It is our ultimate goal to completely separate the curing of inorganic and organic phases to gain complete control over the morphology, and hence optimization of “all” the coating properties. Thus far, it has been found that concomitant UV curing of the inorganic and organic phases using titanium sol-gel precursors afforded nanocomposite coatings which completely block the substrate from UV light while maintaining a transparent to visible light. Also, it has been found that the morphology of the inorganic phase is highly dependent on the concentration and reactivity of the coupling agent. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Some Large Wood-Boring Beetles in Southeastern USA

Ethanol and α-pinene were tested as attractants for large wood-boring pine beetles in Alabama, Florida, Georgia, North Carolina, and South Carolina in 2002–2004. Multiple-funnel traps baited with (−)-α-pinene (released at about 2 g/d at 25–28°C) were attractive to the following Cerambycidae: Acanthocinus nodosus, A. obsoletus, Arhopalus rusticus nubilus, Asemum striatum, Monochamus titillator, Prionus pocularis, Xylotrechus integer, and X. sagittatus sagittatus. Buprestis lineata (Buprestidae), Alaus myops (Elateridae), and Hylobius pales and Pachylobius picivorus (Curculionidae) were also attracted to traps baited with (−)-α-pinene. In many locations, ethanol synergized attraction of the cerambycids Acanthocinus nodosus, A. obsoletus, Arhopalus r. nubilus, Monochamus titillator, and Xylotrechus s. sagittatus (but not Asemum striatum, Prionus pocularis, or Xylotrechus integer) to traps baited with (−)-α-pinene. Similarly, attraction of Alaus myops, Hylobius pales, and Pachylobius picivorus (but not Buprestis lineata) to traps baited with (−)-α-pinene was synergized by ethanol. These results provide support for the use of traps baited with ethanol and (−)-α-pinene to detect and monitor common large wood-boring beetles from the southeastern region of the USA at ports-of-entry in other countries, as well as forested areas in the USA.