Studies on syntheses and permeabilities of special polymer membranes.: 15. Permeation characteristics of nylon-12 cellulose acetate blends

The permeation characteristics of nylon-12-cellulose acetate polymer blend membranes in the separation of polymers, poly(vinyl alcohols), from their aqueous solutions were investigated under various conditions. The permeation characteristics were influenced markedly by the ratio of nylon-12-cellulose acetate, the feed concentration, the operating pressure and temperature. It was found that the changes of polymer ratio and the concentration of blended polymer were related to the change of microporous structure of the resulting membranes. When the cellulose acetate content was higher a significant compaction of the membrane occurred under pressure. It was found that there was a concentration polarization of poly(vinyl alcohol) molecules on the membrane surface, whose thickness increased with increase in molecular weight of poly(vinyl alcohol) and in feed concentration. The bursting strength of the polymer blend membranes swollen with water increased considerably as the cellulose acetate content in the blended polymer increased.     

Separation of aqueous organic liquid solutions through polymer membranes

Characteristics of permeation and separation for aqueous dimethyl sulfoxide, acetic acid and ethanol solutions through some polymer membranes such as chitosan, poly(vinyl chloride) and poly(dimethyl siloxane) membrane were studied by evapomeation. In temperature difference controlling evapomeation (TDEV), when the temperature of the feed solution was kept constant and the temperature of the membrane surroundings was changed, permselectivity for water increased in the chitosan and poly(vinyl chloride) membranes; in the poly(dimethyl siloxane) membrane the perm-selectivity for ethanol increased while decreasing the temperature of the membrane surroundings. Permeation and separation mechanisms for aqueous organic liquid solutions through the above polymer membranes by the TDEV method are discussed.     

Cellulose acetate and sulfonated polysulfone blend ultrafiltration membranes. I. Preparation and characterization

Modification of polymeric membrane materials by incorporation of hydrophilicity results in membranes with low fouling behavior and high flux. Hence, Polysulfone was functionalized by sulfonation and ultrafiltration membranes were prepared based on sulfonated polysulfone and cellulose acetate in various blend compositions. Polyethyleneglycol 600 was employed as a nonsolvent additive in various concentrations to the casting solution to improve the ultrafiltration performance of the resulting membranes. The total polymer concentration, cellulose acetate, and sulfonated polysulfone polymer blend composition, additive concentration, and its compatibility with polymer blends were optimized. The membranes prepared were characterized in terms of compaction, pure water flux, membrane resistance, and water content. The compaction takes place within 3–4 h for all the membranes. The pure water flux is determined largely by the composition of sulfonated polysulfone and concentration of additive. Membrane resistance is inversely proportional to pure water flux, and water content is proportional to pure water flux for all the membranes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1749–1761, 2002     

Triblock copolymers of methyl methacrylate/N‐vinyl pyrrolidone and their hydrophilication effects on poly(vinylidene fluoride) porous membranes

The new amphiphilic triblock copolymers of poly(N‐vinyl pyrrolidone‐b‐methyl methacrylate‐b‐N‐vinyl pyrrolidone) (P(VP‐b‐MMA‐b‐VP)) were synthesized via a reversible addition fragmentation chain transfer polymerization route. Using these copolymers as additives in casting solutions, the porous blend membranes of poly (vinylidene fluoride) and P(VP‐b‐MMA‐b‐VP) were prepared following a typical nonsolvent induced phase separation process. The influences of P(VP‐b‐MMA‐b‐VP) on the morphologies of the blend membranes were observed by scanning electron microscopy. The chemical compositions in membrane surface layers were measured by X‐ray photoelectron measurement. Water contact angle and water flux experiments were used to evaluate the hydrophilicity and permeation properties of the blend membranes. It was found that the P(VP‐b‐MMA‐b‐VP) copolymers could be retained in membrane stably in membrane formation and application process. The copolymers could enrich in surface layer and endowed the blend membrane with efficient hydrophilicity and higher water permeation flux. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Studies on cellulose acetate‐carboxylated polysulfone blend ultrafiltration membranes. III

Enhancement of the hydrophilicity in polymeric membrane materials results in membranes with higher flux and better membrane characteristics. Hence, polysulfone was carboxylated and ultrafiltration membranes were prepared from blends of cellulose acetate and carboxylated polysulfones having various degrees of carboxylation with a total polymer concentration of 20 wt % in casting solution and at different blend polymer compositions. The effects of degree of carboxylation on membrane characteristics such as compaction, pure water flux, and membrane hydraulic resistance (R_m) have been investigated. The influence of the polymer concentration in the blend solution on the performance of blend membranes at various blend polymer compositions has also been investigated and compared with that of blend membranes prepared from blends of cellulose acetate and polysulfone or carboxylated polysulfone with a total polymer concentration of 17.5 wt %. Further, the solute rejection performance of the membranes has also been investigated by subjecting the membranes to metal ion permeation studies using polyelectrolyte‐enhanced ultrafiltration. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 976–988, 2005     

Water vapor/propylene sorption and diffusion behavior in PVA-P(AA-AMPS) blend membranes by GCMC and MD simulation

Detailed atomistic structures of blend membranes (poly vinyl alcohol (PVA)/(acrylic acid-co-2-acrylamido-2-methylpropylsulfonic acid) (P(AA-AMPS)) were constructed to investigate the sorption and diffusion behavior of gas molecules (water and propylene) in the membranes. Interaction and miscibility between PVA and P(AA-AMPS) were calculated, and it was found that strong intermolecular interaction resulted in good miscibility of PVA and P(AA-AMPS) in the blend. The polymer chains mobility and free volume properties of the blend membranes were characterized. The sorption quantities and sorption sites of water and propylene in the blend membranes were calculated using Grand Canonical Monte Carlo (GCMC) method. The diffusion coefficients of water in the blend membranes were calculated by molecular dynamics (MD) simulation. The simulated results of the membrane structure (chain mobility, free volume properties), the sorption quantities and diffusion coefficients of water/propylene in the blend membranes showed the identical changing trends as the experimental results. Hopefully, this study could offer qualitative insight into the mass transport phenomena within the blend membranes.     

Separation of liquid mixtures by using polymer membranes. III. Grafted poly(vinyl alcohol) membranes in vacuum permeation and dialysis

A series of poly(vinyl alcohol) membranes were modifed by radiation-induced graft copolymerization with acrylic acid and methacrylic acid monomers. These grafted poly(vinyl alcohol) membranes were then tested for their separation and permeability characteristics in vacuum permeation and dialysis experiments. The permselectivity of the membranes toward methanol and water was studied on a vacuum permeation apparatus at 30, 40, and 50°C. The permeation process was found to be a temperature-activated process. The logarithm of the permeation rate varied linearly with the reciprocal of the absolute temperature. The permeability of the grafted membranes was found to increase with the degree of grafting, with no appreciable selectivity toward water in binary mixtures. The acrylic acid-grafted membranes generally showed greater improvement in permeability than the methacylic-grafted membranes. The permeability of the grafted membranes toward methanol, sodium chloride, urea, creatinine, and uric acid was studied in a dialyzer. In all cases, the grafted membranes showed an improved permeability toward these solutes over the commercial poly(vinyl alcohol) membranes. The dialysis results were then compared with those obtained for dialysis-grade cellophane membranes. For the case of sodium chloride, urea, and methanol, the permeability of the grafted membranes was comparable to that of cellophane. A comparison of commercial and grafted poly(vinyl alcohol) membranes in their permeability toward ionic solutes exhibited somewhat anomalous behavior in that the permeability of the commercial membranes was higher than that of the grafted membranes. This related to the ionic nature of the modified membrane. The permeability coefficients determined in the dialysis experiments were found to be directly related to the degree of hydration of the grafted membrane. This behavior was attributed to changes in the size and shape of voids within the membrane structure.     

Preparation of high‐flux ultrafiltration membranes by blending strongly charged polymer

Three kinds of high‐flux ultrafiltration membranes were fabricated by blending strongly charged polymer [sulfonated poly(phenylene oxide) (SPPO)] with neutral polymer [cellulose acetate (CA), polyethersulfone (PES), or polyvinylidene fluoride (PVDF)]. After blending with SPPO, the pure water flux of CA‐SPPO, PES‐SPPO, and PVDF‐SPPO membrane increase by 3, 76, and 30 times at a transmembrane pressure of 100 kPa. Compared with the unblended membranes, the pore radius of CA‐SPPO, PES‐SPPO, and PVDF‐SPPO membrane increased from 31.9 to 33.2 nm, 26.1 to 28.6 nm, and 19.8 to 25.7 nm, respectively. The addition of strongly charged polymer decreased the thermodynamic stability of casting solutions, promoting the phase inversion process and resulting in highly porous structure. The charged groups and hydrophilicity of the polymer facilitate the formation of an additive concentration gradient (more additive in the active layer), endowing the blend membrane with better hydrophilicity and greater wettability gradient. The high porosity, good hydrophilicity, and larger wettability gradient enable the high permeation of blend membranes. This work shows how the strongly charged polymer affects the formation and performance of blend membrane, which will be useful for designing high‐performance membrane. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44570.     

Properties and pervaporation characteristics of chitosan–poly(N‐vinyl‐2‐pyrrolidone) blend membranes for MeOH–MTBE

Clear blends of chitosan with poly(N‐vinyl‐2‐pyrrolidone) (PVP) made from aqueous solutions appear to be miscible from visual appearance. Infrared (IR) spectra used to investigate the carbonyl—hydroxyl hydrogen bonding in the blends indicated compatibility of two polymers on a molecular level. The IR spectra were also used to determine the interaction change accessing with increasing temperature and indicated that a significant conformational change occurred. On the other hand, the blend membranes were evaluated for separation of methanol from methyl tert‐butyl ether. The influences of the membrane and the feed compositions were investigated. Methanol preferentially permeates through all the tested membranes, and the partial flux of methanol significantly increase with the poly(N‐vinyl‐2‐pyrrolidone) content increasing. The temperature dependence of pervaporation performance indicated that a significant conformational change occurred with increasing temperature. Combined with the IR results, the pervaporation properties are in agreement with characteristics of interaction between chain–chain within the blend membranes. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1452–1458, 1999     

Preparation,structure, and transport properties of ultrafiltration membranes of poly(vinyl chloride) and poly(vinyl pyrrolidone) blends

Ultrafiltration (UF) membranes based on poly(vinyl chloride) and poly(vinyl pyrrolidone) blends were prepared by the phase inversion method, and the factors governing membrane properties were investigated. The membranes were characterized by scanning electron microscopy and atomic force microscopy. The fouling characteristics of the membranes were determined by UF of aqueous solutions of bovine serum albumin (BSA) over a pH range of 2–9 and varying salt concentrations. The maximum adsorption of the protein on the membrane surface occurred near the isoelectric point (pI 4.8) of BSA, and the presence of the salts increased the fouling of the membrane. The results can be explained in terms of the nature of the membrane polymer and the effect of different ionic environments on the permeability of the deposited protein layer. The net charge on the BSA molecules appears to be a dominant factor in determining the flux of water through the blend membranes. The UF flux is correlated by a model based on the membrane resistance, adsorbed protein resistance, and time dependent resistance of the concentration polarization layer near the membrane surface. The ζ potentials of the membranes were also determined before and after UF to characterize the surface potential of the membrane. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2606–2620, 2000     

Studies on syntheses and permeabilities of special polymer membranes. VI. Permeation characteristics of cellulose nitrate membranes and cellulose membranes

The permeation characteristics of cellulose nitrate membranes and cellulose membranes were investigated using aqueous solutions of poly(ethylene glycol) as feed. To gain cellulose membranes the nitro groups in cellulose nitrate were converted to hydroxyl groups. It was found that cellulose nitrate membranes separate poly(ethylene glycol) 6000 but not any cellulose membrane did separate poly(ethylene glycol) 20 000.     

Investigations on nylon 4 membranes: Synthesis and transport properties. II. Transport properties of nylon 4 polymer membranes

The reverse osmosis, ultrafiltration, and dialysis properties of nylon 4 membranes to separations of sodium chloride, urea, a series of ethylene glycols and other compounds in the aqueous phase were investigated. The nylon 4 membranes were prepared from a formic acid solution with and without organic or inorganic additives. The effects of polymer concentration, amount of additives, casting time, and temperature on the membrane performance in terms of salt separation and product rate were investigated. The tensile properties of the nylon 4 membranes in both the dry and wet states were determined. It was found that the highest salt separation of a 0.1% sodium chloride solution did not exceed 53.3%. However, these membranes showed some intersting dialysis properties which were comparable to those of commercial cellophane and cellulose acetate membranes.     

Studies on syntheses and permeabilities of special polymer membranes. IV. Permeation characteristics of improved cellulose nitrate membranes

For the purpose of the application of cellulose nitrate membranes for artificial kidneys, the permeation characteristics and the bursting strength of three types of membranes, which were prepared from a system of cellulose nitrate/methyl alcohol/1,4-dioxane/barium perchlorate (CN-1), from a system of cellulose nitrate/methyl alcohol/formamide (CN-2), and a poly(ethylene terephthalate) cloth coated with the casting solution of CN-2 (CN-3), were investigated under various conditions. It was found that permeabilities of these membranes were influenced significantly by the preparation methods of the membranes and the permeation conditions, and they depended upon the structure of the resulting membranes and the interaction between the polymer in the membrane and the feed. In blood filtrations, the permeation rates of our three types of membranes had about four-fold values than a cuprophane membrane, and moreover no protein was found in the blood filtrate. The bursting strength of the membranes swollen with water was in the order CN-3 > cuprophane > CN-2 > CN-1, and this ratio was calculated to be about 5.9:1.0:0.5:0.3     

Proton exchange membranes based on poly(vinylidene fluoride) and sulfonated poly(ether ether ketone)

Blend membranes were obtained by solution casting from poly(vinylidene fluoride) (PVDF) and sulfonated poly(ether ether ketone) (SPEEK) in N,N-dimethylacetamide (DMAc). DSC and XRD were used to characterize the structure of the blend membranes. The effect of PVDF content on the membrane properties was investigated. The methanol permeability, water uptake and the swelling ratio of blend membranes decreased with the increase of PVDF content. Though the proton conductivity decreased upon the addition of PVDF, they were still comparable to that of Nafion^® 117 membrane. Higher selectivities were also found for most blend membranes in comparison with Nafion^® 117 membrane. The effect of methanol concentration on solution uptake, swelling ratio and methanol permeability of the blend membranes was also studied.     

Studies on syntheses and permeabilities of special polymer membranes. XVI. Permeation and separation characteristics of aqueous polymer solutions for acrylonitrile-styrene copolymer membranes

The permeation and separation characteristics of aqueous polymer solutions using acrylonitrile-styrene copolymer membranes were investigated under various conditions. The membranes obtained from dimethyl sulfoxide solution of acrylonitrile-styrene copolymer have not a sufficient reproducibility and stability of permeation. These lacks were improved by adding ethylene glycol or glycerol to the casting solution and treating the membranes with pressure. The permeation and separation characteristics were influenced significantly by the additional amount of above additives, the heat treatment temperature, and the operating pressure. It was found that the concentration polarization of poly(vinyl alcohol) molecules onto the surface of the acrylonitrile-styrene copolymer membranes is smaller than that onto hydrophilic polymer membranes such as membranes of cellulose acetate, cellulose nitrate, and nylon 12, etc. Moreover, the acrylonitrile-styrene copolymer membranes show better performance for separation and concentrating of aqueous polymer solutions than hydrophilic membranes.     

Structures and gas permeabilities of poly(vinyl chloride)/oligo(dimethylsiloxane) blend membranes

A series of polymer blend membranes with several weight ratios of poly(vinyl chloride) (PVC) and oligo(dimethylsiloxane) (ODMS) were prepared and the permeation behaviors of O₂ and N₂ were studied. These components are only partially miscible to each other, leading to a phase separation. In order to improve the compatibility of these polymer blends, the use of a graft copolymer PVC-g-ODMS was explored. The gas permeation studies, the thermal analyses, and the microscopic observations were made on PVC-g-ODMS/ODMS blend membranes, and the results indicate that these blend membranes have rather high gas permeabilities together with good mechanical properties.     

Poly(vinyl alcohol)/poly(vinyl pyrrolidone) interpenetrating polymer network: Synthesis and pervaporation properties

Novel interpenetrating polymer network membranes were made from poly(vinyl alcohol)/poly(vinyl pyrrolidone) blends of different compositions. The two polymer components were independently crosslinked chemically with glutaraldehyde and photochemically with 4,4′‐diazostilbene‐2,2′‐disulfonic acid disodium salt. The membrane performances were studied in pervaporation of tetrahydrofuran (THF)/water and THF/methanol mixtures. It was found that the membranes were excellent in THF dehydration, but much less efficient for the separation of THF/methanol mixtures. The pervaporation results were consistent with the membrane swelling data. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2808–2814, 2003     

Asymmetric membranes fabricated from poly(acrylonitrile‐co‐N‐vinyl‐2‐pyrrolidone)s with excellent biocompatibility

Poly(acrylonitrile‐co‐N ‐vinyl‐2‐pyrrolidone)s (PANCNVPs) show excellent biocompatibility. In this work, PANCNVPs with different contents of N‐vinyl‐2‐pyrrolidone (NVP) were fabricated into asymmetric membranes by the phase inversion method. The surface chemical composition of the resultant membranes was determined by Fourier transform infrared spectroscopy–attenuated total reflection. Field emission scanning electron microscopy was used to examine the surface and cross section morphologies of the membranes. It was found that the morphologies hardly change with the increase of NVP content in PANCNVP, while the deionized water flux increases remarkably and the bovine serum albumin (BSA) retention decreases slightly. Experiment of dynamic BSA solution filtration was carried out to evaluate the antifouling properties of the studied membranes. The relative flux reduction of PANCNVP membrane containing 30.9 wt % of NVP is 25.9%, which is far smaller than that of the polyacrylonitrile membrane (68.8%). Results deduce that this improvement comes from the excellent biocompatibility of NVP moieties instead of the hydrophilicity change, because the water contact angles of these membranes fluctuate between 60 and 70°. Results from the membranes using poly(N‐vinyl‐2‐pyrrolidone) (PVP) as an additive confirm that, to a certain extent, the PANCNVP membranes show the advantages of antifouling compared with the polyacrylonitrile/PVP blending membrane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4577–4583, 2006     

Development and characterization of cellulose acetate benzoate flat osmotic membranes

Different parameters of casting solutions and casting conditions were studied for the development of cellulose acetate benzoate flat osmotic membranes. Casting solutions were prepared with different concentrations of the polymer, the additive, and the solvent; viscosity of the casting solution; and the thickness of the membrane developed. The membranes were given different evaporation periods and annealing temperatures under different RH. Different annealing baths were also used. Based on these, conditions were optimized for the development of cellulose acetate benzoate flat osmotic membranes. These membranes were characterized with respect to bound water content, specific water content, transport properties by direct osmosis, salt intake by direct immersion, water permeability coefficient of the dense membrane, diffusion coefficient, salt permeability, and salt distribution by electrical conductivity. Also, cellulose acetate benzoate membranes were compared with conventionally used cellulose acetate membranes. © 1994 John Wiley & Sons, Inc.     

Miscible chitosan/tertiary amide polymer blends

The miscibility of five chitosan/tertiary amide polymer blend systems was studied. Based on the optical transparency of the blend and the existence of a single glass transition temperature, chitosan was found to be miscible with poly(N‐vinyl‐2‐pyrrolidone), poly(N‐methyl‐N‐vinylacetamide), poly(N,N‐dimethylacrylamide), poly(2‐methyl‐2‐oxazoline), and poly(2‐ethyl‐2‐oxazoline). Fourier transform infrared spectroscopy showed the existence of hydrogen‐bonding interactions between chitosan and the tertiary amide polymers. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1785–1790, 2000