Electrical characteristics of an optically controlled N-channelAlGaAs/GaAs/InGaAs pseudomorphic HEMT

Electrical characteristics of an n-channel Al_0.3Ga_0.7As/GaAs/In_0.13Ga_0.87 As pseudomorphic HEMT (PHEMT) with L_g=1 μm on GaAs are characterized under optical input (P_opt). Gate leakage and drain current have been analyzed as a function of V_GS, V _DS, and P_opt. We observed monotonically increasing gate leakage current due to the energy barrier lowering by the optically induced photovoltage, which means that gate input characteristics are significantly limited by the photovoltaic effect. However, we obtained a strong nonlinear photoresponsivity of the drain current, which is limited by the photoconductive effect. We also proposed a device model with an optically induced parasitic Al_0.3Ga_0.7As MESFET parallel to the In_0.13Ga_0.87As channel PHEMT for the physical mechanism in the drain current saturation under high optical input power     

Metamorphic In0.4Al0.6As/In0.4Ga0.6As HEMTs on GaAs substrate

New In_0.4Al_0.6As/In_0.4Ga_0.6 As metamorphic (MM) high electron mobility transistors (HEMTs) have been successfully fabricated on GaAs substrate with T-shaped gate lengths varying from 0.1 to 0.25 μm. The Schottky characteristics are a forward turn-on voltage of 0.7 V and a gate breakdown voltage of -10.5 V. These new MM-HEMTs exhibit typical drain currents of 600 mA/mm and extrinsic transconductance superior to 720 mS/mm. An extrinsic current cutoff frequency f_T of 195 GHz is achieved with the 0.1-μm gate length device. These results are the first reported for In_0.4 Al_0.6As/In_0.4Ga_0.6As MM-HEMTs on GaAs substrate     

Single- and double-heterojunction pseudomorphic In0.5(Al0.3Ga0.7)0.5P/In0.2Ga0.8As high electron mobility transistors grown by gas sourcemolecular beam epitaxy

In_0.5(Al_0.3Ga_0.7)_0.5 P/In_0.2Ga_0.8As single- and double-heterojunction pseudomorphic high electron mobility transistors (SH-PHEMTs and DH-PHEMTs) on GaAs grown by gas-source molecular beam epitaxy (GSMBE) were demonstrated for the first time. SH-PHEMTs with a 1-μm gate-length showed a peak extrinsic transconductance g_m of 293 mS/mm and a full channel current density I_max of 350 mA/mm. The corresponding values of g_m and I_max were 320 mS/mm and 550 mA/mm, respectively, for the DH-PHEMTs. A short-circuit current gain (H₂₁) cutoff frequency f_T of 21 GHz and a maximum oscillation frequency f_max of 64 GHz were obtained from a 1 μm DH device. The improved device performance is attributed to the large ΔE_c provided by the In_0.5(Al_0.3Ga_0.7)_0.5P/In _0.2Ga_0.8As heterojunctions. These results demonstrated that In_0.5(Al_0.3Ga_0.7)_0.5P/In _0.2Ga_0.8As PHEMT's are promising candidates for microwave power applications     

High-breakdown AlGaAs/InGaAs/GaAs PHEMT with tellurium doping

The authors report the fabrication and characterisation of an Al _0.43Ga_0.57As/In_0.2Ga_0.8 As/GaAs pseudomorphic HEMT (PHEMT) with high channel conductivity grown by solid source MBE. The high conductivity of the channel is a direct consequence of the high sheet charge and high mobility that has recently been obtained by using tellurium as the n-type dopant in 43% AlGaAs. The device characteristics reflect the resulting reduction in the parasitic resistances of the high channel conductivity. Microwave measurements yield a short-circuit current gain cutoff frequency f_T of 11 GHz and maximum oscillation frequency f_max of 25 GHz. A high gate-drain breakdown voltage of 26 V along with a maximum drain current density of 400 mA/mm obtained in the device illustrate the applicability of this technology in microwave power field effect transistors     

RF and Logic Performance Improvement of $ hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}/hbox{InAs}/hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}$ Composite-Channel HEMT Using Gate-Sinking Technology

Eighty-nanometer-gate In_0.7Ga_0.3As/InAs/In_0.7Ga_0.3As composite-channel high-electron mobility transistors (HEMTs), which are fabricated using platinum buried gate as the Schottky contact metal, were evaluated for RF and logic application. After gate sinking at 250degC for 3 min, the device exhibited a high g_m value of 1590 mS/mm at V_d = 0.5 V, the current-gain cutoff frequency f_T was increased from 390 to 494 GHz, and the gate-delay time was decreased from 0.83 to 0.78 ps at supply voltage of 0.6 V. This is the highest f_T achieved for 80-nm-gate-length HEMT devices. These superior performances are attributed to the reduction of distance between gate and channel and the reduction of parasitic gate capacitances during the gate-sinking process. Moreover, such superior performances were achieved through a very simple and straightforward fabrication process with optimal epistructure of the device.     

Metamorphic InAlAs/InGaAs HEMTs on GaAs substrates with a novelcomposite channels design

We report on fabrication and performance of novel 0.13 μm T-gate metamorphic InAlAs/InGaAs HEMTs on GaAs substrates with composite InGaAs channels, combining the superior transport properties of In_0.52Ga_0.48As with low-impact ionization in the In_0.32Ga_0.68As subchannel. These devices exhibit excellent DC characteristics, high drain currents of 750 mA/mm, extrinsic transconductances of 600 mS/mm, combined with still very low output conductance values of 20 mS/mm, and high channel and gate breakdown voltages. The use of a composite InGaAs channels leads to excellent cut-off frequencies: f_max of 350 GHz and an f_T 160 GHz at V_DS=1.5 V. These are the best microwave frequency results ever reported for any FET on GaAs substrate     

Low noiseIn0.32(AlGa)0.68As/In0.43Ga0.57As metamorphic HEMT on GaAs substrate with 850 mW/mm output powerdensity

A double-pulse-doped InAlGaAs/In_0.43Ga_0.57As metamorphic high electron mobility transistor (MHEMT) on a GaAs substrate is demonstrated with state-of-the-art noise and power performance, This 0.15 μm T-gate MHEMT exhibits high on- and off-state breakdown (V_ds>6 V and V_dg>13 V, respectively) which allows biasing at V_ds>5 V. The 0.6 mm device shows >27 dBm output power (850 mW/mm) at 35 GHz-the highest reported power density of any MHEMT. Additionally, a smaller gate periphery 2×50 μm (0.1 mm) 43% MHEMT exhibits a F_min=1.18 dB and 10.7 dB associated gain at 25 GHz, and also is the first noise measurement of a -40% In MHEMT. A double recess process with selective etch chemistries provides for high yields     

High-performance InP/In0.53Ga0.47As/InPdouble HBTs on GaAs substrates

InP/In_0.53Ga_0.47As/InP double heterojunction bipolar transistors (HBTs) were grown on GaAs substrates. A 140 GHz power-gain cutoff frequency f_max and a 207 GHz current-gain cutoff frequency f_τ were obtained, presently the highest reported values for metamorphic HBTs. The breakdown voltage BV_CEO was 5.5 V, while the dc current gain β was 76. High-thermal-conductivity InP metamorphic buffer layers were employed in order to minimize the device-thermal resistance     

35-nm Zigzag T-Gate $hbox{In}_{0.52}hbox{Al}_{0.48} hbox{As/In}_{0.53}hbox{Ga}_{0.47}hbox{As}$ Metamorphic GaAs HEMTs With an Ultrahigh $f_{max}$ of 520 GHz

Metamorphic GaAs high electron mobility transistors (mHEMTs) with the highest-f _max reported to date are presented here. The 35-nm zigzag T-gate In_0.52Al_0.48As/In_0.53Ga_0.47As metamorphic GaAs HEMTs show f _maxof 520 GHz, f _T of 440 GHz, and maximum transconductance (g _m) of 1100 mS/mm at a drain current of 333 mA/mm. The combinations of f _max and f _T are the highest data yet reported for mHEMTs. These devices are promising candidates for aggressively scaled sub-35-nm T-gate mHEMTs.     

Unstrained, modulation-doped, In0.3Ga0.7As/In0.29Al0.71As field-effect transistor grown on GaAssubstrate

The fabrication, structure, and properties of unstrained modulation-doped, 1-μm-long and 10-μm-wide gate, field effect transistors made of In_0.3Ga_0.7As/In_0.29As_0.71As heterojunctions grown on GaAs substrates using compositionally step-graded buffer layers are described. These devices have a transconductance of 335 mS/mm, f_max of 56 GHz, and a gate breakdown voltage of 23.5 V     

Epitaxial lift-off GaAs HEMT's

An extensive study of epitaxial lift-off (ELO) Al_0.3Ga _0.7As/GaAs modulation doped heterostructure high electron mobility field-effect transistors (HEMT's) is presented. Effects of ELO on electron transport properties of two-dimensional electron gas at AlGaAs/GaAs interface are investigated. An ELO HEMT with 1.5 μm gate length had a maximum extrinsic transconductance g_m-max=125 mS/mm, a unity current gain cut-off frequency f_t=10.5 GHz, and a maximum frequency of oscillation f_max=12 GHz. Statistical distributions of maximum intrinsic transconductance of ELO HEMT's are presented and compared with their on-wafer counterparts. Stability of the ELO HEMT's has also been evaluated by continuous operation at room temperature under dc bias     

Ga0.51In0.49P/In0.15Ga0.85As/GaAs pseudomorphic doped-channel FET with high-current densityand high-breakdown voltage

Ga_0.51In_0.49P/In_0.15Ga_0.85 As/GaAs pseudomorphic doped-channel FETs exhibiting excellent DC and microwave characteristics were successfully fabricated. A high peak transconductance of 350 mS/mm, a high gate-drain breakdown voltage of 31 V and a high maximum current density (575 mA/mm) were achieved. These results demonstrate that high transconductance and high breakdown voltage could be attained by using In_0.15Ga_0.85As and Ga_0.51In_0.49P as the channel and insulator materials, respectively. We also measured a high-current gain cut-off frequency f_t of 23.3 GHz and a high maximum oscillation frequency f_max of 50.8 GHz for a 1-μm gate length device at 300 K. RF values where higher than those of other works of InGaAs channel pseudomorphic doped-channel FETs (DCFETs), high electron mobility transistors (HEMTs), and heterostructure FETs (HFETs) with the same gate length and were mainly attributed to higher transconductance due to higher mobility, while the DC values were comparable with the other works. The above results suggested that Ga_0.51In_0.49P/In_0.15Ga_0.85 As/GaAs doped channel FET's were were very suitable for microwave high power device application     

Double-dopedIn0.35Al0.65As/In0.35Ga0.65As power heterojunction FET on GaAs substrate with 1 W outputpower

A double-doped metamorphic In_0.35Al_0.65As/In _0.35Ga_0.65As power heterojunction FET (HJFET) on GaAs substrate is demonstrated. The HJFET exhibits good dc characteristics, with gate forward turn on voltage of 1.0 V, breakdown voltage of 20 V, and maximum drain current of 490 mA/mm. Under RF operation at a frequency of 950 MHz, a power added efficiency of 63% with associated output power of 31.7 dBm is obtained at a gate width of 12.8 mm. This large gate width and state-of-the-art power performance in metamorphic HJFETS were enabled by a selective etching, sputtered WSi gate process and low surface roughness due to an Al_0.60Ga_0.40As_0.69Sb_0.31 strain relief buffer     

Carrier Transport in High-Mobility III–V Quantum-Well Transistors and Performance Impact for High-Speed Low-Power Logic Applications

DC and high-frequency device characteristics of In_0.7Ga_0.3As and InSb quantum-well field-effect transistors (QWFETs) are measured and benchmarked against state-of- the-art strained silicon (Si) nMOSFET devices, all measured on the same test bench. Saturation current (I_on) gam of 20% is observed in the In_0.7Ga_0.3As QWFET over the strained Si nMOSFET at (V_g - V_t) = 0.3 V, V_ds = 0.5 V, and matched I_off, despite higher external resistance and large gate-to-channel thickness. To understand the gain in I_on, the effective carrier velocities (v_eff) near the source-end are extracted and it is observed that at constant (V_g - V_t) = 0.3 V and V_ds = 0.5 V, the v_eff of In_0.7Ga_0.3As and InSb QWFETs are 4-5times higher than that of strained silicon (Si) nMOSFETs due to the lower effective carrier mass in the QWFETs. The product of v_eff and charge density (n_s), which is a measure of "intrinsic" device characteristics, for the QWFETs is 50%-70% higher than strained Si at low-voltage operation despite lower ns in QWFETs. Calibrated simulations of In_0.7Ga_0.3As QWFETs with reduced gate-to-channel thickness and external resistance matched to the strained Si nMOSFET suggest that the higher v_eff will result in more than 80% I_on increase over strained Si nMOSFETs at V_ds = 0.5 V, (V_g - V_t) = 0.3 V, and matched I_off, thus showing promise for future high-speed and low-power logic applications.     

Metamorphic InP/InGaAs heterojunction bipolar transistors on GaAssubstrate: DC and microwave performances

High-performance InP/In_0.53Ga_0.47As metamorphic heterojunction bipolar transistors (MHBTs) on GaAs substrate have been fabricated using In_xGa_1-xP strain relief buffer layer grown by solid-source molecular beam epitaxy (SSMBE). The MHBTs exhibited a dc current gain over 100, a unity current gain cutoff frequency (f_T) of 48 GHz and a maximum oscillation frequency (f_MAX) of 42 GHz with low junction leakage current and high breakdown voltages. It has also been shown that the MHBTs have achieved a minimum noise figure of 2 dB at 2 GHz (devices with 5×5 μm ² emitter) and a maximum output power of 18 dBm at 2.5 GHz (devices with 5×20 μm² emitter), which are comparable to the values reported on the lattice-matched HBTs (LHBTs). The dc and microwave characteristics show the great potential of the InP/InGaAs MHBTs on GaAs substrate for high-frequency and high-speed applications     

High performance 0.35 μm gate-length monolithicenhancement/depletion-mode metamorphicIn0.52Al0.48As/In0.53Ga0.47As HEMTs on GaAs substrates

Monolithic integration of enhancement (E)- and depletion (D)-mode metamorphic In_0.52Al_0.48As/In_0.53Ga_0.47 As/GaAs HEMTs with 0.35 μm gate-length is presented for the first time. Epilayers are grown on 3-inch SI GaAs substrates using molecular beam epitaxy. A mobility of 9550 cm²/V-s and a sheet density of 1.12×10^{12 -2} are achieved at room temperature. Buried Pt-gate was employed for E-mode devices to achieve a positive shift in the threshold voltage. Excellent characteristics are achieved with threshold voltage, maximum drain current, and extrinsic transconductance of 100 mV, 370 mA/mm and 660 mS/mm, respectively for E-mode devices, and -550 mV, 390 mA/mm and 510 mS/mm, respectively for D-mode devices. The unity current gain cutoff frequencies of 75 GHz for E-mode and 80 GHz for D-mode are reported     

Fabrication of 0.15-μm Γ-Shaped Gate In0.52Al0.48As/In0.6Ga0.4As Metamorphic HEMTs Using DUV Lithography and Tilt Dry-Etching Technique

An In_0.52Al_0.48As/In_0.6Ga_0.4 As metamorphic high-electron mobility transistor (MHEMT) with 0.15-mum Gamma-shaped gate using deep ultraviolet lithography and tilt dry-etching technique is demonstrated. The developed submicrometer gate technology is simple and of low cost as compared to the conventional E-beam lithography or other hybrid techniques. The gate length is controllable by adjusting the tilt angle during the dry-etching process. The fabricated 0.15-mum In_0.52Al_0.48As/In_0.6Ga_0.4As MHEMT using this novel technique shows a saturated drain-source current of 680 mA/mm and a transconductance of 728 mS/mm. The f_T and f_max of the MHEMT are 130 and 180 GHz, respectively. The developed technique is a promising low-cost alternative to the conventional submicrometer E-beam gate technology used for the fabrication for GaAs MHEMTs and monolithic microwave integrated circuits     

InGaP/InGaAs HFET with high current density and high cut-offfrequencies

Doped channel pseudomorphic In_0.49Ga_0.51P/In _0.20Ga_0.80As/GaAs heterostructure field effect transistors have been fabricated on GaAs substrate with 0.25 μm T-gates and self-aligned ohmic contact enhancement. By introducing the channel doping and reducing the series resistances, a high current density of 500 mA/mm is obtained in combination with cut off frequencies of f_T=68 GHz and f_max=160 GHz. The channel doping did not affect the RF-performance of the device essentially, which is additionally reflected in noise figures below 1.0 dB with an associated gain of 14.5 dB at 12 GHz     

A 0.15-μm 60-GHz high-power composite channel GaInAs/InP HEMTwith low gate current

This letter presents recent improvements and experimental results provided by GaInAs/InP composite channel high electron mobility transistors (HEMT). The devices exhibit good dc and rf performance. The 0.15-μm gate length devices have saturation current density of 750 mA/mm at V_GS=+0 V. The Schottky characteristic is a typical reverse gate-to-drain breakdown voltage of -8 V. Gate current issued from impact ionization has been studied in these devices, in the first instance, versus drain extension. At 60 GHz, an output power of 385 mW/mm has been obtained in such a device with a 5.3 dB linear gain and 41% drain efficiency which constitutes the state-of-the-art. These results studied are the first reported for a composite channel Al_0.65In_0.35As/Ga_0.47In_0.53 As/InP HEMT on an InP substrate     

0.12 μm transferred-substrateIn0.52Al0.48As/In0.53Ga0.47As HEMTs on silicon wafer

New In_0.52Al_0.48As/In_0.53Ga_0.47 As transferred-substrate high electron mobility transistors (TS-HEMTs) have been successfully fabricated on 2-in Silicon substrate with 0.12 μm T-shaped gate length. These new TS-HEMTs exhibit typical drain currents of 450 mA/mm and extrinsic transconductance up to 770 mS/mm. An extrinsic current gain cutoff frequency f_T of 185 GHz is obtained. That result is the first reported for In_0.52Al_0.48As/In_0.53Ga_0.47 As TS-HEMTs on Silicon substrate