共查询到20条相似文献,搜索用时 140 毫秒
1.
电量变送器检定装置的测量不确定度评定 总被引:1,自引:0,他引:1
通过对CL30 1电量变送器检定装置建标中存在的不确定度分析、计算等问题 ,用功率变送器测量的实例 ,介绍了电测量变送器装置检定功率变送器的测量不确定度分析和计算方法 ,并对其测量的可信性作出评价。 相似文献
2.
3.
4.
5.
6.
差压变送器被大量应用在水口山各冶炼单位的各个测量点,为了能对差压变送器进行合理配置和检定,本文介绍了利用便携式数字压力计对差压变送器进行检定的方法,并对检定结果进行不确定度分析论证。 相似文献
7.
8.
介绍了一种通过信号放大电路、A/D和单片机相结合的智能温度变送器的设计方法,给出了硬件设计原理图和部分程序.用这种方法设计的温度变送器精度高、稳定性好,并可进行上位通讯,实现计算机网络控制. 相似文献
9.
介绍了正流行的单晶硅谐振式变送器EJA系列智能变送器的工作原理、主要性能及与电厂控制系统DCS的通讯;电厂采用EJA系列智能变送器检测锅炉给水流量、加热器水位、抽汽压力、凝汽器真空等;并预测了其应用方向. 相似文献
10.
三相有功功率变送器已广泛应用在电力、交通、化工、冶金等部门,为更好的合理使用变送器,下面对变送器的调试与维修作简单的介绍。一、三相有功功率变送器的调试三相有功功率变送器是采用比较法进行调试的,将被试的三相功率变送器与0.5级的三相功率表进行比较,图1为三相有功功率变送器调试接线图。 相似文献
11.
变电站基础工程承担所有上部结构的载荷,施工质量的好坏直接影响到工程的安全性和使用功能。介绍了变电站工程基础形式(包括刚性基础、扩展基础、杯形基础、筏板基础)及其构造要求,阐述了钢筋混凝土工程(包括模板工程、钢筋工程、混凝土工程)施工质量控制要点,最后简述了混凝土结构工程质量评定要求。 相似文献
12.
阐述了基于小波包最优基的图像压缩算法,分析了代价函数的选择和最优基的构建并与小波树压缩算法进行了比较,对小波包分解尺度及不同小波基选取对压缩性能的影响进行了探讨.仿真实验表明,基于小波包最优基的压缩算法在保持图像细节信息方面优于小波树压缩算法.但是,如何合理的选取分解尺度及小波基仍有待于进一步研究. 相似文献
13.
M. V. Il’in N. N. Bespalov S. S. Kapitonov I. V. Gulyaev 《Russian Electrical Engineering》2017,88(6):336-341
The method of selecting power semiconductor devices for group parallel connection on the basis of models developed on the basis of the measured electrical and thermal parameters and characteristics of certain devices are considered. Experimental data are obtained using the ADIP-6 test equipment. The electrical part of the model is constructed on the basis of the electrical parameters of the volt–ampere characteristic in a high-conductivity condition, and the thermal part is developed on the basis of the electrothermalanalogy method. The parameters of the thermal model are determined on the basis of the measured value of the thermal junction-to-case resistance in the steady-state thermal mode. The electrical and thermal parts of the model are connected through the temperature dependences of the volt–ampere characteristic parameters. A sample of ten power diodes is considered as an example, parallel connections consisting of two diodes are constructed of them, and the electrical and thermal processes are analyzed in this group using the simulation method for all possible combination of the diodes. The potentially reliable and unreliable diode combinations were specified on the basis of the simulation results. The temperature of the semiconductor structure is used as a criterion for determining reliability. A connection in which the temperature of the semiconductor structures of the devices included in the connection did not exceed the admissible limit value was considered as potentially reliable. Two connections, referred to as “potentially reliable” and “potentially unreliable” connections, are considered as an example. 相似文献
14.
15.
Wang Shichang 《电气》2012,23(3):30-33
Calculations and analyses are made for the ultimate composition of 158 Chinese power coals.The resuits reveal that the carbon content on as received basis,Car,increases linearly with the increase of th... 相似文献
16.
17.
氢冷发电机组在线干燥技术 总被引:1,自引:1,他引:0
介绍压缩式与吸附式2种氢冷发电机组在线干燥技术,对其优缺点进行综述。在此基础上,提出压缩制冷与吸附干燥联合式新型氢气去湿技术,并对其研究与开发的具体内容进行分析,为氢冷发电机组在线干燥技术的改造与开发提供理论基础。 相似文献
18.
19.
提出基于相量测量装置的电力系统在线等效算法.该方法考虑系统等效参数及负荷变化对电压的影响,克服了传统两点潮流法假设小扰动前后系统等效参数不变的缺点及等效参数的漂移问题.在此基础上,利用等效参数判断与电压临界点的距离,提出节点的负荷裕度指标,包括电压稳定裕度和警戒裕度,该指标直观、快速反映当前运行点的负荷水平,为电压在线控制提供依据.将系统中所有负荷节点指标相比较,可找出薄弱节点.在IEEE14节点系统上进行数值仿真,验证了该方法的正确性及有效性. 相似文献