A versatile approach to develop porous hydrogels with a regular pore distribution and investigation of their physicomechanical properties

Porous polyacrylamide (PAAm) hydrogels with enhanced mechanical properties and regular pore distribution have been synthesized by a unique and facile methodology, which involves formation of the hydrogel pores by leaching out chemically modified silica particles. To improve the pore distribution and mechanical properties of the hydrogel network, porogen particles have been modified with PAAm chains chemically attached to the silica surface. Grafting polymerization initiated by peroxide groups immobilized on the particle surface has been used for this modification. The grafted PAAm layer on the silica surface improves the dispersibility of the porogen material in the hydrogel composition, and simultaneously forms pore “walls” reinforcing the hydrogel network, after leaching out the silica particles. The proposed synthetic way for the development of porous hydrogels includes three steps: (i) tethering of PAAm chains to silica particles due to the grafting polymerization initiated by an adsorbed polyperoxide macroinitiator (PPM), (ii) simultaneous crosslinking of grafted PAAm chains and PAAm forming hydrogel network, and (iii) pore formation by leaching out silica particles in the presence of hydrofluoric acid. The PPM has been synthesized by a free radical copolymerization of the peroxide monomer (PM) N‐(tert‐butylperoxymethyl)acrylamide with acrylamide. Both PM and PPM have been developed in our lab, and applied for the synthesis of porous polymeric hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of surface modification of carbon nanofibers on the mechanical properties of polyamide 1212 composites

In this study, the effects of carbon nanofiber (CNF) surface modification on mechanical properties of polyamide 1212 (PA1212)/CNFs composites were investigated. CNFs grafted with ethylenediamine (CNF‐g‐EDA), and CNFs grafted with polyethyleneimine (CNF‐g‐PEI) were prepared and characterized. The mechanical properties of the PA1212/CNFs composites were reinforced efficiently with addition of 0.3 wt % modified CNFs after drawing. The reinforcing effect of the drawn composites was investigated in terms of interfacial interaction, crystal orientation, crystallization properties and so on. After the surface modification of CNFs, the interfacial adhesion and dispersion of CNFs in PA1212 matrix were improved, especially for CNF‐g‐PEI. The improved interfacial adhesion and dispersion of CNFs in PA1212 matrix was beneficial to reinforcement of the composites. Compared with pure PA1212, improved degree of crystal orientation in the PA1212/CNF‐g‐PEI (CNF‐g‐EDA) composites was responsible for reinforcement of mechanical properties after drawing. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41424.     

Synthesis of thermosensitive polymers containing sugar branches

Copolymers of 6‐O‐vinyladipoyl‐D ‐glucose (VAG) and N‐isopropyl acrylamide (NIPAm) were synthesized by radical polymerization. The number‐average molecular weights of the copolymers were 3 × 10⁴ ≈ 6 × 10⁴. The observed segment composition of copolymers at the feed molar ratio (VAG 25/NIPAm 75) was VAG 10/NIPAm 90. The polymerization rate of the VAG monomer was slower than that of the NIPAm monomer. The lower critical‐solution temperature of copolymers measured with a light‐scattering photometer and a differential scanning calorimeter increased with increasing VAG segment composition. The increase in transition temperature was accompanied by a decrease in transition heat. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 384–387, 2001     

Drug diffusion in neutral and ionic hydrogels assembled from acetylated galactoglucomannan

In this study, hydrogels based on acetylated galactoglucomannan (AcGGM)—a hemicellulose present in softwood—were synthesized and examined for their properties in drug‐release systems using two model substances of different molecular weight, size, and polarity (caffeine and vitasyn blue). Neutral hydrogels were produced from functionalized AcGGM using hydroxyethyl methacrylate (HEMA) coupled via carbonyldiimidazole (CDI) and a co‐monomer in a radical‐initiated polymerization. Through a second modification reaction between the HEMA‐modified AcGGM (M‐AcGGM‐methacrylated AcGGM) and maleic anhydride, a “double‐modified” AcGGM (CM‐AcGGM‐carboxylated M‐AcGGM) was successfully formed that could be cross‐linked to form ionic hydrogels by the very same polymerization method. The neutral hydrogels showed drug release kinetics that could be easily regulated by changing the relative amount of the methacrylated AcGGM and its corresponding degree of methacrylation. The drug release rate and the Fickian swelling decreased with an increase in these two aforementioned parameters. The ionic hydrogels showed quicker release kinetics and higher swelling capabilities than the corresponding nonionic gels did, especially at neutral conditions. Under acidic conditions, the release speed was lowered as expected because of protonation of carboxylic functionalities. Based on the findings we conclude that these novel hemicellulose‐containing hydrogels have future prospects in drug release formulations, e.g., in a later stage of development for application in oral drug administration technology. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of glucosamine modified poly(ethylene glycol) hydrogels via photopolymerization

This study presented the synthesis and characterization of glucosamine (GlcN) modified poly (ethylene glycol) (PEG) hydrogels. The chemical structure was characterized by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The morphology of hydrogels was observed by scanning electron microscopy (SEM). The results indicated that GlcN was successfully incorporated into PEG hydrogel network. Moreover, the data of the swelling ratio showed that the ratio of GlcN‐modified PEG hydrogels was lower than that of pure poly(ethylene glycol) diacrylated (PEGDA). Biocompatibility of unreacted GlcN monomer and GlcN‐modified hydrogels was also evaluated in vitro. Compared with glucosamine hydrochloride, 2 and 5 mM N‐acroloyl‐glucosamine monomer exhibited no toxicity against bone marrow stromal cells (BMSCs), while with the concentration increased to 10 mM, cell viability appeared to decrease. However, when BMSCs were encapsulated in GlcN‐modified hydrogels via photopolymerization method, cells remained vigorous viability. Metabolic activity of the encapsulated cells demonstrated GlcN‐modified hydrogels was favorable for cell proliferation. Compared with free GlcN, covalent binding GlcN showed lower cytotoxicity and higher cell proliferation properties. As a result, GlcN‐modified PEGDA hydrogels could be used as safe and injectable cell carriers for in situ tissue engineering applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Dual pH‐ and temperature‐responsive hydrogels with extraordinary swelling/deswelling behavior and enhanced mechanical performances

pH‐ and temperature‐responsive semi‐interpenetrating nanocomposite hydrogels (NC hydrogels) were prepared with surface‐functionalized graphene oxide (GO) as the crosslinker, N‐isopropylacrylamide (NIPAM) as the monomer, and chitosan (CS) as an additive. The effects of 3‐(trimethoxysilyl)propylmethacrylate‐modified GO sheets and CS content on various physical properties were investigated. Results show that PNIPAM/CS/GO hydrogels undergo a large volumetric change in response to temperature. Swelling ratios of PNIPAM/CS/GO hydrogels are much larger than those of the conventional organically crosslinked PNIPAM hydrogels. The deswelling test indicates that the deswelling rate was greatly enhanced by incorporating CS into the hydrogel network and using the surface‐functionalized GO as the crosslinker. The pH‐sensitivity of PNIPAM/CS/GO hydrogels is evident below their volume phase transition temperature. Moreover, the PNIPAM/CS/GO hydrogels have a much better mechanical property compared with traditional hydrogels even in a high water content of 90%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41530.     

Novel in situ carbon nanofiber/polydimethylsiloxane nanocomposites: Synthesis,morphology, and physico‐mechanical properties

A series of carbon nanofiber (CNF)/polydimethylsiloxane (PDMS)‐based nanocomposites was prepared by anionic ring opening polymerization of octamethylcyclotetrasiloxane (D₄) in presence of pristine CNF and amine‐modified CNF. A detailed study of morphology–property relationship of the nanocomposites was carried out in order to understand the effect of chemical modification and loading of filler on property enhancement of the nanocomposites. An elaborate comparison of structure and properties was carried out for the nanocomposites prepared by in situ and conventional ex situ methods. Pronounced improvement in degree of dispersion of the fillers in the matrix on amine modification of CNFs was reflected in mechanical properties of the modified nanocomposites. Maximum upliftment in mechanical properties was observed for in situ prepared amine modified CNF/hydroxyl PDMS nanocomposites. For 8 phr filler loading, tensile strength increased by 370%, while tensile modulus showed an increase of 515% compared with the virgin elastomer. Furthermore, in situ prepared unmodified CNF/hydroxyl PDMS nanocomposites showed an increase of 141°C in temperature of maximum degradation (T_max) for 8 phr CNF loading. These results were correlated with the morphological analysis through transmission electron microscopic studies. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Surface organic modification of titanium dioxide fine particles through photo polymerization

C?C unsaturated groups were chemically inserted onto TiO₂ particles surfaces through chemical reaction of hydroxyl group on the TiO₂ fine particle surface with 2,4‐diidocyanatotoluene (TDI) first, and then with 2‐hydroxyethyl acrylate (HEA). Finally, TiO₂ fine particles with surface organic modification were made through the free radical copolymerization reaction with n‐butyl acrylate (BA) monomer under UV irradiation. The structure and properties of unmodified and modified TiO₂ were studied by FT‐IR, XPS, TGA, TEM, lipophilic rates, and adhesion properties tests. The results show that the surface of TiO₂ has been successfully introduced with the organic chains through chemical bonding linkage; the surface lipophilic rates of TiO₂ particles are increased. The dispersion and compatibility of the modified TiO₂ particles in a commercial ink 508C resin greatly improve as compared with that of unmodified TiO₂, and agglomeration of particles obviously reduces. The adhesion strength between the white printing ink made from the modified TiO₂ particles and BOPP is much better than that from the unmodified TiO₂. When the organic rate reached 24.93%, the adhesion strength reaches Grade I. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

One‐shot radical polymerization of vinyl monomers with different reactivity accompanying spontaneous delay of polymerization for the synthesis of double‐network hydrogels

Double‐network hydrogels were conveniently synthesized by the one‐shot radical polymerization of an ionic monomer for the first network and a non‐ionic monomer for the second network in the presence of crosslinkers by simultaneous addition of the monomers, that is, one‐shot and spontaneous two‐step polymerization accompanying the delay of polymerization of a second network monomer. We analyzed the polymerization process based on the conversion of each monomer during the reaction in the absence of crosslinkers. Then we fabricated the double‐network hydrogels using several polymerization systems consisting of a conjugated monomer and a non‐conjugated monomer in the presence of the dual crosslinkers. We analyzed the swelling, mechanical and viscoelastic properties of hydrogels synthesized by one‐shot radical polymerization to confirm the production mechanism and the network structure of the hydrogels. © 2020 Society of Chemical Industry     

Preparation of antibacterial temperature‐sensitive silver‐nanocomposite hydrogels from N‐isopropylacrylamide with green tea

This article reports the temperature‐sensitive, green tea (GT)‐based silver‐nanocomposite hydrogels for bacterial growth inactivation. The temperature‐sensitive hydrogels were prepared via free‐radical polymerization using temperature‐sensitive N‐isopropylacrylamide (NIPAM) monomer with GT as the hydrogel matrix. The nanocomposite hydrogels were encapsulated with silver ions via swelling method, which was later reduced to silver nanoparticles using Azadirachta indica leaf extract. The temperature‐sensitive silver nanocomposite hydrogels were analyzed by using Fourier transforms infrared, UV–visible spectroscopy, differential scanning calorimetry–thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The prepared hydrogels exhibited higher phase volume transition temperature than the NIPAM. The inhibition zone study of the inactivation of bacteria on the developed hydrogels was carried out against Gram negative (Escherichia coli) and Gram positive (Staphylococcus aureus), which revealed that the prepared hydrogels are helpful for the inactivation of these bacteria due to the high stabilization of antibacterial properties of the silver nanoparticles. The developed hydrogels are promising for biomedical applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45739.     

Fabrication of Photothermally Responsive Nanocomposite Hydrogel through 3D Printing

The responsive hydrogels have received great attention in many fields. However, the molding method and response mode of such hydrogels are criticized when it comes to real applications. In this work, a novel class of poly(N‐isopropyl acrylamide)/graphene oxide (PNIPAm/GO) nanocomposite hydrogel through self‐assembly three‐dimensional (3D) printing via ultraviolet light polymerization. The precursor is ordinarily constituted by NIPAm monomer, crosslinker, and water mixed with a photoinitiator, besides the introduction of nanoclay adjusts the shear thinning properties to an optimal level, which is important for the 3D printing precision. Then, the graphite oxide as infrared light absorber endows the hydrogel fast photothermal excited responsivity instead of conventional temperature response. The shrinkage and swelling of the composite hydrogel can be controlled by turning the near‐infrared light on or off. Meanwhile, the reversible behavior of as‐prepared hydrogel is easily regulated by altering the content of GO and illumination time of near‐infrared light. Additionally, a round tube is obtained based on the as‐prepared hydrogel, which can be driven to get a pencil, indicating their potential applications in actuator and other functional program.     

In situ preparation of magnetite/cuprous oxide/poly(AMPS/NIPAm) for removal of methylene blue from waste water

In situ techniques have attracted great attention for the formation of nanomaterials with controlled sizes, shapes and dispersion within supramolecular hydrogels. In the present work, the doping of copper oxides onto magnetite nanoparticles into hydrogels based on sodium 2‐acylamido‐2‐methylpropanesulfonate (AMPS) and N‐isopropylacrylamide NIPAm copolymers was investigated. The contents, morphology and thermal stability of magnetite, cupreous oxide and doped copper oxides onto the magnetite nanoparticles were evaluated. The optimum conditions for removal the cationic dye methylene blue (MB), such as solution pH, concentration of adsorbents, contact time and stirring time, were determined to investigate the effect of MB concentrations on the removal efficiencies of the prepared adsorbents. The recyclability of the prepared AMPS/NIPAm composites for the removal of MB was examined for up to six cycles without changes in removal effectiveness. © 2018 Society of Chemical Industry     

Synthesis of hydrogels by polymerization of itaconic acid–choline chloride deep eutectic solvent

Itaconic acid (IA)–choline chloride (CC) deep eutectic solvents (DES) were prepared and characterized by NMR, TGA, and DSC. Poly(itaconic acid–co–bisacrylamide) hydrogels were synthesized by in situ polymerization‐crosslinking of the DES. For comparison, the hydrogels were also prepared in water under the same process conditions, that is, temperature, time, initial concentration of the monomer, the initiator, and N,N′‐methylenebisacrylamide (BAA) as the cross‐linking agent. Chemical structure of the polymers was proved by elemental analysis and FTIR. The values of insoluble gel fraction and water swelling of obtained hydrogels suggest that polymers prepared in DES have higher cross‐link density. Preliminary comparative studies of polymerization of IA in water and in DES medium indicated higher polymerization rate resulting from the presence of the choline salt, what might explain properties of the hydrogels prepared in DES. This study shows that DES can be used both as a solvent and catalyst in free‐radical polymerization processes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40608.     

Surface‐active amphiphilic poly[(2‐acrylamido‐2‐methylpropanesulfonic acid)‐co‐(N‐isopropylacrylamide)] nanoparticles as stabilizer in aqueous emulsion polymerization

This work reports the effect of nanogel solid particles on the surface and interfacial tension of water/air and water/styrene interfaces. Moreover, the work aimed to use nanogels as a stabilizer for miniemulsion aqueous polymerization. A series of amphiphilic crosslinked N‐isopropylacrylamide (NIPAm) and 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) copolymer nanogels were synthesized based on an aqueous copolymerization batch method. Divinylbenzene and N,N‐methylene bisacrylamide were used as crosslinkers. The morphologies of the prepared nanogels were investigated using transmission and scanning electron microscopies. The lower critical transition temperatures were determined using differential scanning calorimetry. The surface tension of colloidal NIPAm/AMPS dispersions was measured as functions of surface age, temperature and the morphology of the NIPAm/AMPS nanogels. The NIPAm/AMPS nanogels reduced the surface tension of water to about 30.1 mN m^?1 at 298 K with a small increase at 313 K. Surface activities of these nanogels in water were determined by surface tension measurements. The NIPAm/AMPS dispersions had high surface activity and were used as a stabilizer to prepare a crosslinked poly(styrene‐co‐AMPS) microgel based on emulsion crosslinking polymerization. © 2013 Society of Chemical Industry     

Effect of the sodium dodecyl sulfate/monomer ratio on the network structure of hydrophobic association hydrogels with adjustable mechanical properties

The study of gel‐network structure is not as extensive as the study of the application of hydrogels. However, the distribution of the inner structure is crucial for designing hydrogels with tunable mechanical properties to meet certain kinds of demands. In this study, a series of hydrophobic association hydrogels (HA‐gels) were synthesized by free‐radical micellar copolymerization in a sodium dodecyl sulfate (SDS) surfactant solution. The hydrophobic monomer was palmityl alcohol poly(oxyethylene acrylate) (AEO–AC), which is an ecofriendly alternative to the traditional octyl phenol poly(oxyethylene acrylate). Interestingly, we found that the molar ratio [or ratio point (R)] of SDS to AEO–AC played a key role in tuning the mechanical properties. All series HA‐gels denominated a similar down–up–down tendency with increasing R, and the best R is 3. This result was consistent with the microscopic network structure number of the hydrophobic monomer (N_H = 21–24), and this indicated that each hydrophobic monomer associated three SDS monomers in its internal networks. The resulting AEO–AC–acrylamide gels exhibited the best mechanical strength (yield maximum broken stress = 218 kPa) and the maximum effective crosslink density. Moreover, the relationship between the network structure and the mechanical properties of the HA‐gels was investigated with various Rs. Two different interaction effects of distribution between SDS and AEO–AC are discussed in detail. The HA‐gels exhibited self‐healing properties and maintained their shape in water over 160 days. The results indicate that changing R is an effective method for tuning the mechanical properties of HA‐gels as a type of prospective biomedical material. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45196.     

Radiation synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone/acrylic acid) and poly(N‐vinyl‐2‐pyrrolidone/acrylamide) hydrogels for some metal‐ion separation

Two different hydrogels, prepared from N‐vinyl‐2‐pyrrolidone/acrylic acid (NVP/AAc) and N‐vinyl‐2‐pyrrolidone/acrylamide (NVP/AAm), were studied for the separation and extraction of some heavy‐metal ions from wastewater. The hydrogels were prepared by the γ‐radiation‐induced copolymerization of the aforementioned binary monomer mixtures. Further modification was carried out for the NVP/AAc copolymer through an alkaline treatment to improve the swelling behavior by the conversion of the carboxylic acid groups into its sodium salts. The thermal stability and swelling properties were also investigated as functions of the N‐vinyl‐2‐pyrrolidone content. The characterization and some selected properties of the prepared hydrogels were studied, and the possibility of their practical use in wastewater treatment for heavy metals such as Cu, Ni, Co, and Cr was investigated. The maximum uptake for a given metal was higher for a treated NVP/AAc hydrogel than for an untreated NVP/AAc hydrogel and was higher for an untreated NVP/AAc hydrogel than for an NVP/AAm hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2642–2652, 2004     

Synthesis and characterization of cholic acid‐containing biodegradable hydrogels by photoinduced copolymerization

A cholic acid (CA)‐containing biodegradable hydrogel (PLA‐PEG‐PLA‐co‐MACAH) was synthesized from the photoinduced copolymerization of a CA‐modified methacrylate monomer (MACAH), bearing a spacer of hexane‐1,6‐diol spacer between the methacryloyl and the cholanoate moieties, and a macromonomer (PLA‐PEG‐PLA‐DA), bearing two acryloyl end groups derived from a poly(lactic acid)‐b‐poly(ethylene glycol)‐b‐poly(lactic acid) triblock copolymer. The structure of MACAH was confirmed by FTIR, ¹H‐NMR, and MS. The hydrogel PLA‐PEG‐PLA‐co‐MACAH was characterized by scanning electron microscopy and X‐ray diffraction. The experiment results showed that the swelling ratios of the hydrogels decreased with the increase of the CA fraction. The investigation on the in vitro degradation of the hydrogel showed that the CA‐containing hydrogels degraded much slower than the hydrogels without CA component. The bioactivity of the synthesized hydrogels was assessed by the simulated body fluid method. The observed formation of hydroxyapatite on the scaffold of the hydrogels indicated that the hydrogels possess good bioactivity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Carbon nanotubes/chitin nanowhiskers aerogel achieved by quaternization‐induced gelation

Organic aerogels from polysaccharides such as cellulose and chitin are of particular importance because they utilize renewable feedstocks. In this article, the aerogels were prepared through the self‐assembly of chitin nanowhiskers previously modified. The surface of chitin nanowhiskers was rendered cationic through two reactions. A first reaction between hydroxyl groups of chitin and 2‐chloroethyl isocyanate and a second reaction between the chloride groups of isocyanate anchored to the surface and 1‐methylimidazole. This modification led to stable aqueous suspensions of the chitin nanowhiskers with gelation and rheological properties. Additionally, chitin nanowhiskers aerogels containing modified carbon nanotubes were obtained. The addition of modified carbon nanotubes provoked a change in the morphology of the hydrogels and as a consequence, the rheological properties of the hydrogel are modified as well. In contrast from previous procedures, this method has not required any kind of solvent exchange or high pressure in order to obtain the final materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42547.     

Radiation-Induced Acrylamide/4-Vinyl Pyridine Biocidal Hydrogels: Synthesis,Characterization, and Antimicrobial Activities

Acrylamide/4-vinyl pyridine hydrogels were synthesized by radiation polymerization technique using a γ-irradiator. The prepared radiation-synthesized acrylamide/4-vinyl pyridine hydrogels were then treated using a modifying agent with aromatic functional group. The modifying agent used in the modification of acrylamide/4-vinyl pyridine hydrogels was the N-aromatic alkyl quaternizing agent of chloromethyl benzene. The functional group on the modified acrylamide/4-vinyl pyridine hydrogels was confirmed with Fourier transform infrared (FTIR) spectrometry. Thermal analysis, surface morphology investigation, and swelling of the modified and unmodified hydrogels were completed. The antibacterial and antifungal activities of the modified and unmodified hydrogels were also tested against gram-positive Staphylococcus aureus (ATCC 25923); two gram-negative Escherichia coli (ATCC 25922), and Pseudomonas aeruginosa (ATCC 27853) human pathogenic bacteria and a fungal strain—Candida albicans (ATCC 10231) for their MBC values. It was found that acrylamide/4-vinyl pyridine hydrogels do not possess biocidal properties, whereas the modified form of acrylamide/4-vinyl pyridine?chloromethyl benzene showed highly bactericidal characteristics.     

Microwave‐assisted preparation of temperature sensitive poly(N‐isopropylacrylamide) hydrogels in poly(ethylene oxide)‐600

In this article, a series of poly(N‐isopropylacrylamide) (PNIPAM)‐based hydrogels were prepared under microwave irradiation using poly(ethylene oxide)‐600 (PEO‐600) as reaction medium and microwave‐absorbing agent as well as pore‐forming agent. All of the temperature measurements, gel fractions, and FTIR analyses proved that the PNIPAM hydrogels were successfully synthesized. Within 1 min, the PNIPAM hydrogel with a 98% yield was obtained under microwave irradiation. The PNIPAM hydrogels thus prepared exhibited controllable properties such as pore size, equilibrium swelling ratios, and swelling/deswelling rates when changing the feed weight ratios of monomer (N‐isopropylacrylamide, NIPAM) to PEO‐600. These properties are well adapted to the different requirements for their potential application in many fields such as biomedicine. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4177–4184, 2006