Mechanical and thermal properties of hierarchical composites enhanced by pristine graphene and graphene oxide nanoinclusions

Epoxy resin nanocomposites incorporated with 0.5, 1, 2, and 4 wt % pristine graphene and modified graphene oxide (GO) nanoflakes were produced and used to fabricate carbon fiber‐reinforced and glass fiber‐reinforced composite panels via vacuum‐assisted resin transfer molding process. Mechanical and thermal properties of the composite panels—called hierarchical graphene composites—were determined according to ASTM standards. It was observed that the studied properties were improved consistently by increasing the amount of nanoinclusions. Particularly, in the presence of 4 wt % GO in the resin, tensile modulus, compressive strength, and flexural modulus of carbon fiber (glass fiber) composites were improved 15% (21%), 34% (84%), and 40% (68%), respectively. Likewise, with inclusion of 4 wt % pristine graphene in the resin, tensile modulus, compressive strength, and flexural modulus of carbon fiber (glass fiber) composites were improved 11% (7%), 30% (77%), and 34% (58%), respectively. Also, thermal conductivity of the carbon fiber (glass fiber) composites with 4% GO inclusion was improved 52% (89%). Similarly, thermal conductivity of the carbon fiber (glass fiber) composites with 4% pristine graphene inclusion was improved 45% (80%). The reported results indicate that both pristine graphene and modified GO nanoflakes are excellent options to enhance the mechanical and thermal properties of fiber‐reinforced polymeric composites and to make them viable replacement materials for metallic parts in different industries, such as wind energy, aerospace, marine, and automotive. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40826.     

Influence of graphene-based compounds on the mechanical toughness and thermal stability of polypropylene

A study of the improvement of the mechanical and thermal properties of nanocomposites prepared with polypropylene (PP) and different graphene samples [graphene oxide (GO), reduced GO (RGO), and commercial graphene (G)] is presented. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy characterization were applied to the graphene samples. The nanocomposites were characterized by thermogravimetric analysis, XRD, differential scanning calorimetry, transmission electron microscopy (TEM), tensile, and impact resistance tests. PP/RGO nanocomposites showed significant improvement in mechanical and thermal properties. Sample PP/RGO-0.75 resulted in an increment in Young's modulus (51%), tensile strength (24%), and elongation at break (15%). This is attributed to a good dispersion state, a higher crystallinity percentage, and a good interfacial adhesion between PP and RGO. Sample PP/RGO-0.50 exhibited an increase of 197 °C in the temperature at which a loss in weight of 5% occurred, compared to that for pure PP. The height of stacked layers calculated by XRD measurements was similar to the value observed by TEM. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48258.     

Decoration of graphene oxide nanosheets with amino silane‐functionalized silica nanoparticles for enhancing thermal and mechanical properties of polypropylene nanocomposites

Graphene oxide nanosheets were decorated by amino‐silane modified silica nanoparticles. An electrostatic interaction between the negative charge of oxygen‐containing groups of graphene oxide and the positive charge of amino‐silane functional groups on the surface of silica nanoparticles plays a major role for the interfacial interaction of these two materials. The hybrid material was then used as a reinforcement in polypropylene (PP) composite. The increasing tensile strength at yield, tensile, and flexural modulus of the PP composite at a graphene oxide‐ amino‐silane silica loading content of 20 wt % are about 24.81, 55.52, and 30.35%, respectively, when compared with those of PP. It is believed that GO assists the dispersion of SiO₂ nanoparticles to the polymer matrix because of its unique structure having hydrophilicity due to its oxygen functional groups and hydrophobicity owing to its backbone graphitic carbon structure. This hybrid material may also be used as the reinforcement in other polyolefins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44382.     

Chitosan–graphene oxide nanocomposites: Effect of graphene oxide nanosheets and glycerol plasticizer on thermal and mechanical properties

In this study, graphite oxide (GO) is synthesized from natural graphite flakes by the modified Hummers method. Characterization by Fourier transform infrared, X‐ray photoelectron, Raman and ultraviolet‐visible spectroscopies, X‐ray diffraction, and thermogravimetric analysis is conducted on GO to confirm the oxidation of graphite. Unplasticized and glycerol plasticized chitosan/graphene oxide (CS/GO) nanosheets nanocomposites with different GO loadings are prepared by solution casting. The combined effect of GO and glycerol on structure, thermal and mechanical properties of nanocomposite films is studied. GO nanosheets are well dispersed throughout the CS matrix due to the hydrogen bonding and electrostatic interactions between CS and GO nanosheets. The incorporation of GO within the CS matrix results in a decrease of the crystallinity, an improvement of thermal stability, and a significant enhancement of the stiffness and tensile strength that is emphasized by the glycerol. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45092.     

Elaboration of performance of tea dust–polypropylene composites

In this research work, dynamic, mechanical, and thermophysical properties of untreated and 5, 7, and 10 wt % styrene treated tea dust (TD):polypropylene (PP) composites prepared by injection‐molding machine were elaborated. There were distinctive and significant improvement observed in mechanical properties (tensile strength, tensile modulus, and elongation at break), physical analysis (water swelling), dynamic mechanical properties (storage modulus, loss modulus, and tan δ), and thermal behavior and surface morphological properties of styrene treated TD:PP (40:60) composites as compared to that of untreated one. The tensile strength (from 7.00 to 9.95 MPa), tensile modulus (from 350 to 715 MPa), storage modulus (from 8500 to ～10,500 MPa), and loss modulus (from ～150 to ～200 MPa) increased on 10 wt % styrene treatment of TD over the untreated TD:PP (40:60) composites. The styrene treated TD:PP (40:60) composites behaved as more elastic than their pure counterpart. Styrene treated TD:PP (40:60) composites were more thermally more stable (85 °C difference) as compared to virgin PP. Overall, this research also indicates the use of TD waste. An improvement in dispersion of styrene treated TD particles in PP was also observed in the preparation of the PP composites due to good compatibility of styrene with PP. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44750.     

Hybridizing MWCNT with nano metal oxides and TiO2 in epoxy composites: Influence on mechanical and thermal performances

In this study, the effects of multi‐walled carbon nanotubes (MWCNT), and its hybrids with iron oxide (Fe₂O₃) and copper oxide (CuO) nanoparticles on mechanical characteristics and thermal properties of epoxy binder was evaluated. Furthermore, simultaneous effects of using MWCNT with TiO₂ as pigment and CaCO₃ as filler for epoxy composites were determined. To investigate effects of nano‐ and micro‐particles on epoxy matrix, the samples were evaluated by TGA and DTA. It was found that the hybrid of MWCNT with nano metal oxides caused considerable increment in the tensile and flexural properties of epoxy samples in comparison to the single MWCNT containing samples at the same filler contents. Significant improvement in the thermal conductivity of epoxy samples was obtained by using TiO₂ pigment along with MWCNT. The TiO₂ pigment also caused considerable improvement in mechanical properties of the epoxy matrix and the MWCNT containing nanocomposite. The best mechanical and thermal properties of epoxy nanocomposites were obtained at 1.5 wt % of MWCNT and 7 wt % of TiO₂ that it should be attributed to particle network forming of the particles which cause better nano/micro dispersion and properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43834.     

Epoxy–graphite oxide nanocomposites: Mechanical properties

Graphite oxide (GO) produced by Hummers method was added to epoxy for strengthening purpose. Generally the E‐modulus was increased due to the GO addition; however, depending on the treatment of the GO an increase or decrease was observed for the glass transition temperature. The change in glass transition was a result of changes in the curing behavior. Addition of GO initially increased the curing speed; however, the final curing degree was lower and was dependent on the type of GO added. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43591.     

Thermal,electrical, and mechanical properties of polyethylene–graphene nanocomposites obtained by in situ polymerization

In this study, we investigated the thermal, dynamic mechanical, mechanical, and electrical properties of polyethylene (PE)–graphene nanosheet (GNS) nanocomposites, with GNS amounts from 0 to 20 wt %, prepared by in situ polymerization. The thermal stability was evaluated by thermogravimetric analysis (TGA) and showed that the addition of GNSs to the polyolefin matrix increased the onset degradation temperature by 30°C. The electrical conductivity, measured by the impedance technique, presented a critical percolation threshold of 3.8 vol % (8.4 wt %) of GNS. A slight decrease in the tensile strength was found. On the other hand, dynamic mechanical analysis showed an increase in the storage modulus of the nanocomposites compared with that of neat PE. The glass‐transition temperature value increased from ?111°C (neat PE) to ?106°C (PE/6.6 wt % GNS). All of these results show that PE became stiffer and thermally more stable and could be transformed from an insulator to a semiconductor material in the presence of GNSs. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Influence of rubber content on mechanical,thermal, and morphological behavior of natural rubber toughened poly(lactic acid)–multiwalled carbon nanotube nanocomposites

The effects of natural rubber (NR) on the mechanical, thermal, and morphological properties of multiwalled carbon nanotube (CNT) reinforced poly(lactic acid) (PLA) nanocomposites prepared by melt blending were investigated. A PLA/NR blend and PLA/CNT nanocomposites were also produced for comparison. The tensile strength and Young's modulus of PLA/CNT nanocomposites improved significantly, whereas the impact strength decreased compared to neat PLA. The incorporation of NR into PLA/CNT significantly improved the impact strength and elongation at break of the nanocomposites, which showed approximately 200% and 850% increases at 20 wt % NR, respectively. However, the tensile strength and Young's modulus of PLA/NR/CNT nanocomposites decreased compared to PLA/CNT nanocomposites. The morphology analysis showed the homogeneous dispersion of NR particles in PLA/NR/CNT nanocomposites, while CNTs preferentially reside in the NR phase rather than the PLA matrix. In addition, the incorporation of NR into PLA/CNT lowered the thermal stability and glass‐transition temperature of the nanocomposites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44344.     

Probing the reinforcing mechanism of graphene and graphene oxide in natural rubber

Natural rubber (NR) containing graphene (GE) and graphene oxide (GO) were prepared by latex mixing. The in situ chemically reduction process in the latex was used to realize the conversion of GO to GE. A noticeable enhancement in tensile strength was achieved for both GO and GE filled NR systems, but GE has a better reinforcing effect than GO. The strain‐induced crystallization was evaluated by synchrotron wide‐angle X‐ray diffraction. Increased crystallinity and special strain amplification effects were observed with the addition of GE. The incorporation of GE produces a faster strain‐induced crystallization rate and a higher crystallinity compared to GO. The entanglement‐bound tube model was used to characterize the chain network structure of composites. It was found that the contribution of entanglement to the conformational constraint increases and the network molecular parameters changes with the addition of GE and GO, while GE has a more evident effect than GO. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(2‐hydroxyethyl acrylate) hydrogels reinforced with graphene oxide: Remarkable improvement of water diffusion and mechanical properties

A series of hybrid hydrogels of poly(2‐hydroxyethyl acrylate), PHEA, and graphene oxide, G? O, with G? O content up to 2 wt % has been prepared by in situ polymerization. Because PHEA has been used as biomaterial in various applications, has a side chain with the hydroxyl functional group and its mechanical properties are poor, it is a good candidate for reinforcement with G? O. Fourier transform (infrared) spectroscopy, atomic force microscopy, differential scanning calorimetry, the thermal, mechanical, and water sorption properties of neat PHEA and PHEA/G? O composites have been studied in order to elucidate the dispersion and interaction between both components. An increase in the water diffusion coefficient and dramatic changes in its mechanical properties are the most remarkable results. Thus, at a nanofiller load of 2 wt %, the novel materials present an increased diffusion coefficient higher than 380% and the elastic modulus is enhanced by more than 650% in dry state and by more than 100% in swollen state, both compared to neat PHEA. These results have been attributed to the excellent interaction between the matrix, PHEA, and the reinforcement, G? O, and could open the door to new applications in the field of biomaterials with higher structural requisites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46158.     

Synthesis of polypropylene‐grafted graphene and its compatibilization effect on polypropylene/polystyrene blends

Polypropylene‐graft‐reduced graphene oxide (PP‐g‐rGO) was synthesized and used as a novel compatibilizer for PP/polystyrene (PP/PS) immiscible polymer blends. SEM observation revealed an obvious reduction of the average diameter for the dispersed PS phase with the addition of PP‐g‐rGO into a PP/PS (70/30, w/w) blend. The compatibilization effect of PP‐g‐rGO will subsequently lead to the enhancement of the tensile strength and elongation at break of the PP/PS blends. The compatibilizing mechanism should be ascribed to the fact that PP‐g‐rGO can not only adsorb PS chains on their basal planes through π‐π stacking but also exhibit intermolecular interactions with PP through the grafted PP chains. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40455.     

Solvothermally reduced graphene oxide/polyimide composites: Structures and thermal and mechanical properties

Solvothermally reduced graphene oxide (SRGO)/polyimide (PI) composites were prepared by in situ polymerization. The structures and components were carefully investigated by X-ray diffraction. Thermal properties were measured by thermogravimetry and dynamic thermomechanical analysis. Mechanical properties were carefully evaluated by tensile testing and scanning electron microscopy. The SRGO/PI composites exhibit extremely high tensile strength and elastic modulus, which is 30% higher than that of pure PI film. Meanwhile, the thermal stability of SRGO/PI composites also displays an obvious enhancement. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47164.     

Mechanical and thermal transmission properties of carbon nanofiber‐dispersed carbon/phenolic multiscale composites

The present article reports the development and characterization of carbon nanofiber (CNF)‐incorporated carbon/phenolic multiscale composites. Vapor‐grown CNFs were dispersed homogeneously in to phenolic resin using an effective dispersion route, and carbon fabrics were subsequently impregnated with the CNF‐dispersed resin to develop carbon fiber/CNF/phenolic resin multiscale composites. Mechanical and thermal transmission properties of multiscale composites were characterized. Elastic modulus and thermal conductivity of neat carbon/phenolic and multiscale composites were predicted and compared with the experimental results. It was observed that incorporation of only 1.5 wt % CNF resulted in 10% improvement in Young's modulus, 12% increase in tensile strength, and 36% increase in thermal conductivity of carbon/phenolic composites. Fracture surface of composite samples revealed the formation of stronger fiber/matrix interface in case of multiscale composites than neat carbon/phenolic composites. Enhancement of above properties through CNF addition has been explained, and the difference between the predicted values and experimental results has been discussed. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effects of substitution for carbon black with graphene oxide or graphene on the morphology and performance of natural rubber/carbon black composites

In this study, nanosheets including graphene oxide (GO) and reduced graphene oxide (rGO), were incorporated into natural rubber (NR), to study the effects of substituting GO or rGO for carbon black (CB) on the structure and performance of NR/CB composites. The morphological observations revealed the dispersion of CB was improved by partially substituting nanosheets for CB. The improvements in static and dynamic mechanical properties were achieved at small substitution content of GO or rGO nanosheets. With substitution of rGO nanosheets, significant improvement in flex cracking resistance was achieved. NR/CB/rGO (NRG) composites has a much lower heat build‐up value compared with NR/CB/GO (NG) composites at a high load of nanosheets. However, both GO and rGO tended to aggregate at a high concentration, which led to the poor efficiency on enhancing the dynamic properties, or even deteriorate the performance of rubber composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41832.     

Reinforcement of the mechanical properties in nitrile rubber by adding graphene oxide/silicon dioxide hybrid nanoparticles

Graphene oxide (GO) and silicon dioxide (SiO₂) nanoparticles have been hybridized for improving the mechanical and dynamic mechanical properties of nitrile rubber (NBR). SiO₂ nanoparticles were homogeneously dispersed on the surface and between layers of GO, and the new hybrid nanoparticles formed (GO/SiO₂₎ had better thermal stability than GO. To evaluate the mechanical properties, GO/SiO₂/NBR nanocomposites were prepared by solution blending and mechanical solution methods. It was observed that tensile strength increased in a larger grade in GO/SiO₂/NBR nanocomposites than that in GO/NBR and SiO₂/NBR nanocomposites, while the elongation at break only changes smoothly. Moreover, dynamics measurements also indicated that the elasticity increased after adding GO/SiO₂ hybrid nanoparticles in NBR. From morphology's analysis of GO/SiO₂/NBR and GO/NBR nanocomposites, it is was conclude that the hybridization of the GO/SiO₂ was the determining factor for the reinforcement of the mechanical properties and elasticity of the NBR. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46091.     

Thermal and electrical conductivity of melt mixed polycarbonate hybrid composites co‐filled with multi‐walled carbon nanotubes and graphene nanoplatelets

In this work, we present thermoplastic nanocomposites of polycarbonate (PC) matrix with hybrid nanofillers system formed by a melt‐mixing approach. Various concentrations of multi‐walled carbon nanotubes (MWCNT) and graphene nanoplatelets (GnP) were mixed in to PC and the melt was homogenized. The nanocomposites were compression molded and characterized by different techniques. Torque dependence on the nanofiller composition increased with the presence of carbon nanotubes. The synergy of carbon nanotubes and GnP showed exponential increase of thermal conductivity, which was compared to logarithmic increase for nanocomposite with no MWCNT. Decrease of Shore A hardness at elevated loads present for all investigated nanocomposites was correlated with the expected low homogeneity caused by a low shear during melt‐mixing. Mathematical model was used to calculate elastic modulus from Shore A tests results. Vicat softening temperature (VST) showed opposite pattern for hybrid nanocomposites and for PC‐MWCNT increasing in the latter case. Electrical conductivity boost was explained by the collective effect of high nanofiller loads and synergy of MWCNT and GnP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42536.     

Magnetically aligning multilayer graphene to enhance thermal conductivity of silicone rubber composites

The increasing demand for packaging materials calls for new technologies to achieve excellent thermal conductivity of polymer composites with low content of thermal conductive filler. This article prepared a kind of magnetically functionalized multilayer graphene (Fe₃O₄@MG) via electrostatic interactions, which efficiently enhanced the thermal conductivity of silicone rubber (SR) composites by the alignment of Fe₃O₄@MG in an external magnetic field. The morphology and structure of the Fe₃O₄@MG together with the thermal conductivity of corresponding Fe₃O₄@MG/SR composites were systematically investigated by SEM, TEM, XRD, elemental mapping, and thermal conductivity tester. The obtained results showed that Fe₃O₄@MG was induced to form chain-like bundles in silicone rubber matrix under the applied magnetic field, which enhanced the MG–MG interaction, and formed effective thermal pathways in the alignment direction. Furthermore, as coating mass ratio of Fe₃O₄@MG increased, the thermal conductivity of randomly oriented Fe₃O₄@MG/silicone rubber composites (R-Fe₃O₄@MG/SR) decreased gradually, whereas the through-plane thermal conductivity of vertically aligned Fe₃O₄@MG/silicone rubber composites (V-Fe₃O₄@MG/SR) increased even filled with same contents of thermal conductive filler. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47951.     

Improving thermal conductivity and shear strength of carbon nanotubes/epoxy composites via thiol‐ene click reaction

This study investigates the effect of the thiol‐ene click reaction on thermal conductivity and shear strength of the epoxy composites reinforced by various silane‐functionalized hybrids of sulfhydryl‐grafted multi‐walled carbon nanotubes (SH‐MWCNTs) and vinyl‐grafted MWCNTs (CC‐MWCNTs). The results of Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, thermal gravimetric analysis (TGA), and transmission electron microscopy (TEM) show that the sulfhydryl groups and vinyl groups are successfully grafted onto the surface of MWCNTs, after treatment of MWCNT with triethoxyvinylsilane and 3‐mercaptopropyltrimethoxysilane, respectively. Scanning electron microscopy (SEM), HotDisk thermal constant analyzer (HotDisk), optical microscope, and differential scanning calorimetry (DSC) are used to characterize the resultant composites. It is demonstrated that the hybrid of 75 wt % SH‐MWCNTs and 25 wt % CC‐MWCNTs has better dispersion and stability in epoxy matrix, and shows a stronger synergistic effect in improving the thermal conductivity of epoxy composite via the thiol‐ene click reaction with 2,2′‐azobis(2‐methylpropionitrile) as thermal initiator. Furthermore, the tensile shear strength results of MWCNT/epoxy composites and the optical microscopy photographs of shear failure section indicate that the composite with the hybrid MWCNTs has higher shear strength than that with raw MWCNTs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44579.     

Effect of flake size on thermal properties of graphene oxide/poly(methyl methacrylate) composites prepared via in situ polymerization

The effect of graphene oxide (GO) flake size on thermal properties of GO/poly(methyl methacrylate) (GO/PMMA) composites prepared via in situ polymerization was investigated. Two styles of GO sheets were synthesized from different sizes of graphite powders by modified Hummers' method and GO/PMMA composites with GO of different sizes were prepared via in situ polymerization. Transmission electron microscopy verified that GO sheets produced from large graphite powders was obviously larger than that from small graphite powders. The similar number of layers and disorder degree of two types of GO sheets were proved by X‐ray diffraction and Raman, respectively. X‐ray diffraction and scanning electron microscopy results of GO/composites proved the homogenous dispersion of both two types of GO sheets in polymer matrix. Dynamic mechanical analysis and thermogravimetric analysis results showed that large GO sheets exhibit better improvement than small GO sheets in thermal properties of the composites. Compared with neat PMMA, the glass transition temperature and decomposition temperature of the composites with large GO sheets (0.20 wt %) were increased by 15.9 and 25.9 °C, respectively. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46290.