The influence of coexisted monomer on thermal,mechanical, and hydrolytic properties of poly(p‐dioxanone)

Poly(p‐dioxanone) (PPDO), a typical aliphatic poly(ether‐ester), is generally synthesized via ring‐opening polymerization of 1,4‐dioxan‐2‐one (p‐dioxanone, PDO) monomer. However, a quite amount of PDO monomer should coexist with PPDO product due to the characteristics of the equilibrium polymerization. To clarify the effects of PDO on the properties of PPDO, a series of PPDO/PDO mixtures with different PDO content were prepared by adding PDO to pure PPDO. The thermal, mechanical, and hydrolytic properties of PPDO and PPDO/PDO mixtures were investigated systematically. It reveals that the existence of PDO in the polymer can act as plasticizer to facilitate the crystallization of PPDO, but the increasing of PDO content deteriorates the mechanical properties of the polymers, especially when the PDO loading is more than 3 php. The PDO does not distinctly affect PPDO thermal decomposition, but obviously accelerates the PPDO hydrolytic degradation. This work may provide an important reference for the industrialization and application of PPDO. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43483.     

Synthesis and characterization of ABA type tri‐block copolymers derived from p‐dioxanone,L‐lactide and poly(ethylene glycol)

A series of triblock co‐polymers, consisting of a poly(ethylene glycol) (PEG) central block joined to two blocks of random p‐dioxanone‐co‐L ‐lactide copolymers were synthesized by ring‐opening polymerization of p‐dioxanone (PDO) and L ‐lactide (LLA) initiated by PEG in the presence of stannous 2‐ethylhexanoate catalyst. The resulting copolymers were characterized by various techniques including ¹H and ¹³C NMR and FTIR spectroscopies, gel permeation chromatography, inherent viscosity, wide‐angle X‐ray diffractometry (WAXD) and differential scanning calorimetry (DSC). The conversion of PDO and L ‐lactide into the polymer was studied various mole ratios and at different polymerization temperature from ¹H NMR spectra. Results of WAXD and DSC showed that the crystallinity of PEG macroinitiator was greatly influenced by the composition of PDO and L ‐lactide in the copolymer. The triblock copolymers with low molecular weight were soluble in water at below room temperature. © 2003 Society of Chemical Industry     

Poly(para‐dioxanone)/poly(D,L‐lactide) blends compatibilized with poly(D,L‐lactide‐co‐para‐dioxanone)

The effect of poly(D ,L ‐lactide‐co‐para‐dioxanone) (PLADO) as the compatibilizer on the properties of the blend of poly(para‐dioxanone) (PPDO) and poly(D ,L ‐lactide) (PDLLA) has been investigated. The 80/20 PPDO/PDLLA blends containing from 1% to 10% of random copolymer PLADO were prepared by solution coprecipitation. The PLADO component played a very important role in determining morphology, thermal, mechanical, and hydrophilic properties of the blends. Addition of PLADO into the blends could enhance the compatibility between dispersed PDLLA phase and PPDO matrix; the boundary between the two phases became unclear and even the smallest holes were not detected. On the other hand, the position of the T_g was composition dependent; when 5% PLADO was added into blend, the T_g distance between PPDO and PDLLA was shortened. The blends with various contents of compatibilizer had better mechanical properties compared with simple PPDO/PDLLA binary polymer blend, and such characteristics further improved as adding 5% random copolymers. The maximum observed tensile strength was 29.05 MPa for the compatibilized PPDO/PDLLA blend with 5% PLADO, whereas tensile strength of the uncompatibilized PPDO/PDLLA blend was 14.03 MPa, which was the lowest tensile strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Biodegradable studies of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone), poly(dioxanone), and poly(glycolide‐ε‐caprolactone) (Monocryl®) monofilaments

The aim of the study was to investigate the mechanical properties and biodegradability of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) [P(TMC‐ε‐CL)‐block‐PDO] in comparison with poly(p‐dioxanone) and poly(glycolide‐ε‐caprolactone) (Monocryl®) monofilaments in vivo and in vitro. P(TMC‐ε‐CL)‐block‐PDO copolymer and poly(p‐dioxanone) were prepared by using ring‐opening polymerization reaction. The monofilament fibers were obtained using conventional melt spun methods. The physicochemical and mechanical properties, such as viscosity, molecular weight, crystallinity, and knot security, were studied. Tensile strength, breaking strength retention, and surface morphology of P(TMC‐ε‐CL)‐block‐PDO, poly(p‐dioxanone), and Monocryl monofilament fibers were studied by immersion in phosphate‐buffered distilled water (pH 7.2) at 37°C and in vivo. The implantation studies of absorbable suture strands were performed in gluteal muscle of rats. The polymers, P(TMC‐ε‐CL)‐block‐PDO, poly(p‐dioxanone), and Monocryl, were semicrystalline and showed 27, 32, and 34% crystallinity, respectively. Those mechanical properties of P(TMC‐ε‐CL)‐block‐PDO were comparatively lower than other polymers. The biodegradability of poly(dioxanone) homopolymer is much slower compared with that of two copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 737–743, 2006     

Ultrasonochemical‐assisted fabrication and evaporation‐ induced self‐assembly (EISA) of POSS‐SiO2@Ag core/ABA triblock copolymer nanocomposite film

Poly(ethylene glycol)‐octafunctionalized polyhedral oligomeric silsesquioxane (POSS) (M_n = 5576.6 g/mol) alloying agent stabilized amphiphilic silica@silver metalloid nanocomposite blended with a triblock copolymer poly(p‐dioxanone‐co‐caprolactone)‐block‐poly(ethylene oxide)‐block‐poly(p‐dioxanone‐co‐caprolactone) (POSS‐SiO₂@Ag/PPDO‐co‐PCL‐b‐PEG‐b‐PPDO‐co‐PCL) has been synthesized in both water and in organic medium utilizing ultrasonochemical reaction. The POSS stabilized pre‐made metalloid was successfully dispersed in amphiphilic PPDO‐co‐PCL‐b‐PEG‐b‐PPDO‐co‐PCL (ABA) triblock copolymer matrix of molecular weight 45.9 × 10⁴ g/mol. The mechanism of synthesis of high concentration of SiO₂@Ag nanocomposite from TEOS/AgNO₃ (in the presence of NH₄OH as catalyst/NaBH₄ as reductant) nonmetal/metal precursors and the successful EISA of POSS‐SiO₂@Ag/ABA nanocomposite into films has been discussed. The successful synthesis of metalloid nanocomposite was morphologically accessed by field emission‐scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Surface plasmon resonance was ensured from UV–visible spectral analysis. Identity and the crystallinity of as prepared nanocomposite were studied by X‐ray diffractometer. Structural and luminescence properties of the nanocomposite were examined by Fourier transform infrared spectroscopy and photoluminescence. Thermogravimetric analysis was carried out to study the thermal stability of the resulting hybrid nanocomposite. The resultant inorganic–organic nanocomposite can be easily suspended in water and would be useful in variety of applications. POLYM. COMPOS., 31:1620–1627, 2010. © 2009 Society of Plastics Engineers     

Amphiphilic triblock copolymer based on poly(p‐dioxanone) and poly(ethylene glycol): Synthesis,characterization, and aqueous dispersion

Amphiphilic triblock copolymers composed of poly(p‐dioxanone) (PPDO) and poly(ethylene glycol) (PEG) were synthesized by ring opening polymerization of PDO initiated through dihydroxyl‐terminated PEG in the presence of stannous 2‐ethylhexanoate [Sn(oct)₂] as a catalyst. Polymeric nanoparticles were prepared in an aqueous medium (triple distilled water and phosphate buffer pH 7.4) by cosolvent evaporation technique at room temperature (25°C). Stability of nanoparticles was significantly enough in triple distilled water when compared with the phosphate buffer. Core‐shell geometry of polymeric nanoparticles was characterized by ¹H‐NMR spectroscopy and further confirmed by spectrophotometric analysis using pyrene as a probe. Variation in physicochemical characteristics of polymeric nanoparticles with the fraction of PPDO was investigated through the analysis of microscopic, spectroscopic, and light scattering techniques. Critical micelle concentration of polymer in triple distilled water decreased from 2.3 × 10^?3 to 4.7 × 10^?3. Atomic force microscopic observation revealed that polymeric nanoparticles were spherical and uniform with smooth textured of around 50–68 nm diameter. Dynamic light scattering and electrophoretic light scattering measurements showed a mono‐disperse size distribution of around 113–171 nm hydrodynamic diameters and negative zeta (ζ)‐potential (?4.00 to ?5.87 mV), respectively. The investigation showed a significant effect of polymeric composition on the physicochemical characteristic of polymeric nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2695–2702, 2007     

Polymerization of 1,3‐butadiene with VO(P204)2 activated by methylaluminoxane,purified methylaluminoxane,and trimethylaluminum

The effect of different aluminum‐based cocatalysts (MAO, pMAO, and TMA) on butadiene (Bd) polymerization catalyzed by VO(P204)2 was investigated. The bimodal dependence of the polymer yield on the [MAO]/[V] molar ratio was revealed, and an highest polymer yield was achieved at a rather low [MAO]/[V] molar ratio ([MAO]/[V] = 13). The microstructures of the resulting poly(Bd)s were also significantly influenced by the ratio. In the TMA or pMAO system, the polymer yields were also very sensitive to the [Al]/[V] molar ratio. However, the microstructures of the resulting poly(Bd)s were almost independent of the ratio. In relation to the microstructures of poly(Bd)s obtained by the MAO and TMA systems at various temperatures, the 1,2‐unit contents were found to be the most abundant microstructure for both systems. In the pMAO system, the trans‐1,4‐units were the most abundant. The results of the additions of Lewis bases (THF and TPP) into Bd polyerization system comfirmed the existing of the two types of the reactions of VO(P₂₀₄)₂‐MAO catalyst and had the polymerization process controlled to some extent. The different thermal behaviors of these catalytic systems also show that multiple types of active centers were formed during the reaction between VO(P₂₀₄)₂ and MAO. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Crystallization behavior of poly(p‐dioxanone)‐PU/montmorillonite nanocomposites prepared by chain‐extending reaction

Organo‐modified montmorillonites and poly(p‐dioxanone) (PPDO) diol prepolymers were used to prepare Poly(p‐dioxanone)‐PU/organic montmorillonite (PPDO‐PU/OMMT) nanocomposites by chain‐extending reaction. The crystallization behavior and spherulitic morphology of PPDO‐PU/OMMT nanocomposites were investigated by WXRD, differential scanning calorimetry, and polarized optical microscopy. The results show that the regularity of the chain structure plays a dominant role during the crystallization process rather than that of OMMT content and its dispersion status in PPDO matrix. With similar molecular weight and same OMMT content, PPDO‐PU/OMMT nanocomposite, which derived from lower molecular weight PPDO prepolymer, exhibits lower crystallization rate, melting point, and crystallinity. The influence of the clay content on the crystallization behavior highly depends on its dispersing state. The nucleating effect of OMMT can be only observed at high loading percentage. For the nanocomposites with low clay loading percentage, the retarding effect of exfoliated platelets on the chain‐ordering into crystal lamellae became the key factor. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

AlEt3-H2O-H3PO4 catalyzed polymerizations of 1, 4-dioxan-2-one

Summary A new catalytic system, AlEt₃-H₂O-H₃PO₄(C), was successfully used as a catalyst for synthesizing poly (1,4-dioxan-2-one) (PPDO) in bulk via the ring-opening polymerization (ROP) of 1,4-dioxan-2-one (PDO). The effects of the molar ratio of monomer to catalyst (M/C), the polymerization temperature (T), the reaction time (t) and the water content of monomer PDO (W) were studied systematically. AlEt₃-H₂O-H₃PO₄ has been proved to be a very effective catalyst for ROP of PDO. High molecular weights of PPDO can be obtained under following conditions: T=80 °C, M/C=1311–1573, t=8–10 hours and W<80 ppm.     

Comparative study of propylene polymerization using monosupported and bisupported titanium‐based Ziegler–Natta catalysts

Heterogeneous Ziegler–Natta systems—MgCl₂ (ethoxide type)/TiCl₄/di‐n‐butyl phthalate (DNBP)/triethylaluminum (TEA)/dimethoxymethylcyclohexylsilane (DMMCHS) and SiO₂/MgCl₂ (ethoxide type)/TiCl₄/DNBP/TEA/DMMCHS—were studied for the polymerization of propylene. The slurry polymerization of propylene was carried out with the catalyst systems in n‐heptane. Both systems performed with optimum activity at a particular [Al]/[DMMCHS]/[Ti] molar ratio. The ratio to reach the highest activity was much lower for the bisupported catalyst system. The productivity of the bisupported catalyst was higher than that of the monosupported one. Polypropylene of a high isotacticity index (II; >96%) was obtained with both systems and did not significantly change with an increasing [Al]/[DMMCHS]/[Ti] molar ratio. The addition of hydrogen as a chain‐transfer agent reduced II of the polymers obtained with both systems. The effect of the polymerization temperature (40–75°C) on the viscosity‐average molecular weight (M_v) and II showed a decrease in both cases. The bisupported catalyst system produced a polymer with higher M_v. The effect of temperature on II was similar for both the monosupported and bisupported systems. A monomer pressure of 2.02 × 10⁵ to 0.8 × 10⁶ Pa increased M_v of the obtained polymer. II of the polymer slightly decreased with increasing monomer pressure. The titanium content of the catalyst was 1.70 and 3.55% for the monosupported and bisupported systems, respectively. The surface area of the bisupported catalyst was higher than that of the monosupported catalyst. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2220–2226, 2006     

RAFT polymerization of N‐vinyl pyrrolidone using prop‐2‐ynyl morpholine‐4‐carbodithioate as a new chain transfer agent

RAFT polymerization of N‐vinyl pyrrolidone (NVP) has been investigated in the presence of chain transfer agent (CTA), i.e., prop‐2‐ynyl morpholine‐4‐carbodithioate (PMDC). The influence of reaction parameters such as monomer concentration [NVP], molar ratio of [CTA]/[AIBN, i.e., 2,2′‐azobis (2‐methylpropionitrile)] and [NVP]/[CTA], and temperature have been studied with regard to time and conversion limit. This study evidences the parameters leading to an excellent control of molecular weight and molar mass dispersity. NVP has been polymerized by maintaining molar ratio [NVP]: [PMDC]: [AIBN] = 100 : 1 : 0.2. Kinetics of the reaction was strongly influenced by both temperature and [CTA]/[AIBN] ratio and to a lesser extent by monomer concentration. The activation energy (E_a = 31.02 kJ mol^?1) and enthalpy of activation (ΔH^?= 28.29 kJ mol^?1) was in a good agreement to each other. The negative entropy of activation (ΔS^? = ?210.16 J mol^‐1K^‐1) shows that the movement of reactants are highly restricted at transition state during polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Enhanced degradation stability of poly(p‐dioxanone) under different temperature and humidity with bis‐(2,6‐diisopropylphenyl) carbodiimide

The influences on the degradation of poly(p‐dioxanone) (PPDO) under different temperature and relatively humidity is initially investigated by adding bis‐(2,6‐diisopropylphenyl) carbodiimide (commercial name: stabaxol^®‐1). The changes of intrinsic viscosity, mechanical properties, crystallinity, surface morphologies, and microstructure of PPDO and PPDO containing stabaxol^®‐1 for 6 weeks are monitored. With increasing the degradation time, the intrinsic viscosity and mechanical properties of PPDO decrease much faster than those of PPDO containing 0.6 wt % stabaxol^®‐1. During the degradation, PPDO containing 0.6 wt % stabaxol^®‐1 shows a better physical integrity than PPDO. It has been shown that stabaxol^®‐1 can retard the hydrolysis degradation of PPDO and enhance its hydrolytic stability. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 40026.     

Preparation of poly(tert‐butyl acrylate)‐poly(acrylic acid) amphiphilic copolymers via radiation‐induced reversible addition–fragmentation chain transfer mediated polymerization of tert‐butyl acrylate

Poly(tert‐butyl acrylate) (PtBA) is a versatile hydrophobic macromolecule usually preferred in the development of new materials for a host of applications. PtBA homopolymers with well‐defined structure and controlled molecular weight in a wide range were successfully synthesized via radiation‐induced reversible addition–fragmentation chain transfer (RAFT) polymerization in the presence of a trithiocarbonate type RAFT agent. The polymerization of tBA was performed under ⁶⁰Co γ‐irradiation in the presence of 2‐(dodecylthiocarbonothioylthio)‐2‐methylpropionic acid (DDMAT) as the RAFT agent in toluene at room temperature with three [tBA]/[DDMAT] ratios (400, 600 and 1000) and different irradiation times. Radiation‐induced polymerization of tBA displayed controlled free radical polymerization characteristics: a narrow molecular weight distribution (M_w/M_n ~ 1.1), pseudo first order kinetics and controlled molecular weights. The system followed the RAFT polymerization mechanism even at very low amounts of RAFT agent ([tBA]/[DDMAT] = 1000), and molecular weights up to 113 900 with narrow dispersity (Ð =1.06) were obtained. PtBA was further hydrolysed into different amphiphilic PtBA‐co‐poly(acrylic acid) (PAA) copolymers by low (27.5%) and high (77.3%) degrees of hydrolysis. The pH sensitivity of the two copolymers was investigated by dynamic light scattering at pH 2 and pH 9 (above and below the pK_a value of PAA) and their hydrodynamic diameters and zeta potential values were determined. © 2020 Society of Chemical Industry     

Increasing the compatibility of poly(l‐lactide)/poly(para‐dioxanone) blends through the addition of poly(para‐dioxanone‐co‐l‐lactide)

To modify the mechanical properties of a poly(l ‐lactide) (PLLA)/poly(para‐dioxanone) (PPDO) 85/15 blend, poly(para‐dioxanone‐co‐l ‐lactide) (PDOLLA) was used as a compatibilizer. The 85/15 PLLA/PPDO blends containing 1–5 wt % of the random copolymer PDOLLA were prepared by solution coprecipitation. Then, the thermal, morphological, and mechanical properties of the blends with different contents of PDOLLA were studied via differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and tensile testing, respectively. The DSC result revealed that the addition of PDOLLA into the blends only slightly changed the thermal properties by inhibiting the crystallization degree of the poly(l ‐lactide) in the polymer blends. The SEM photos indicated that the addition of 3 wt % PDOLLA into the blend was ideal for making the interface between the PLLA and PPDO phases unclear. The tensile testing result demonstrated that the mechanical properties of the blends containing 3 wt % PDOLLA were much improved with a tensile strength of 48 MPa and a breaking elongation of 214%. Therefore, we concluded that the morphological and mechanical properties of the PLLA/PPDO 85/15 blends could be tailored by the addition of the PDOLLA as a compatibilizer and that the blend containing a proper content of PDOLLA had the potential to be used as a medical implant material. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41323.     

Thermal properties and non‐isothermal crystallization behavior of biodegradable poly(p‐dioxanone)/poly(vinyl alcohol) blends

Blends of two biodegradable semicrystalline polymers, poly(p‐dioxanone) (PPDO) and poly(vinyl alcohol) (PVA) were prepared with different compositions. The thermal stability, phase morphology and thermal behavior of the blends were studied by using thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). From the TGA data, it can be seen that the addition of PVA improves the thermal stability of PPDO. DSC analysis showed that the glass transition temperature (T_g) and the melting temperature (T_m) of PPDO in the blends were nearly constant and equal to the values for neat PPDO, thus suggesting that PPDO and PVA are immiscible. It was found from the SEM images that the blends were phase‐separated, which was consistent with the DSC results. Additionally, non‐isothermal crystallization under controlled cooling rates was explored, and the Ozawa theory was employed to describe the non‐isothermal crystallization kinetics. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of low‐molecular‐weight polyacrolein

Acrolein was polymerized in a polar solvent in the presence of terc‐ and sec‐butyl lithium as initiators. Using a low monomer to initiator molar ratio and 1‐h reaction time, cyclic structures were shown to be formed in the main chain of the resulting oligomers. The influence of different monomer to initiator molar ratios on molecular weight and on molecular weight distribution was investigated. Chain‐transfer reactions toward the monomer resulted in lower molecular weights and narrower polydispersions as [M]/[I] increased. The influence of initiator type on the polymer molecular weight was also evaluated. FTIR analysis of the degradation products at different heating temperatures indicated that the oligomers structure is composed of aldehyde, ether, and vinyl functional groups. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of ultra‐high‐molecular‐weight polyethylene and its morphological study with a heterogeneous Ziegler–Natta catalyst

Ultra‐high‐molecular‐weight polyethylene (PE) with viscosity‐average molecular weight (M_v) of 3.1 × 10⁶ to 5.2 × 10⁶ was prepared with a heterogeneous Ziegler–Natta MgCl₂ (ethoxide type)/TiCl₄/triethylaluminum catalyst system under controlled conditions. The optimum activity of the catalyst was obtained at a [Al]/[Ti] molar ratio of 61 : 1 and a polymerization temperature of 60°C, whereas the activity of the catalyst increased with monomer pressure and decreased with hydrogen concentration. The titanium content of the catalyst was 2.4 wt %. The rate/time profile of the catalyst was a decay type with a short acceleration period. M_v of the PE obtained decreased with increasing hydrogen concentration and polymerization temperature. The effect of stirrer speeds from 100 to 400 rpm did not so much affect the catalyst activity; however, dramatic effects were observed on the morphology of the polymer particles obtained. A stirrer speed of 200 rpm produced PE with a uniform globulelike morphological growth on the polymer particles. The particle size distributions of the polymer samples were determined and were between 14 and 67 μm. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Polymerization of propylene using the high‐activity Ziegler–Natta catalyst system SiO2/MgCl2 (ethoxide type)/TiCl4/Di‐n‐butyl phthalate/triethylaluminum/dimethoxy methyl cyclohexyl silane

The bisupported Ziegler–Natta catalyst system SiO₂/MgCl₂ (ethoxide type)/TiCl₄/di‐n‐butyl phthalate/triethylaluminum (TEA)/dimethoxy methyl cyclohexyl silane (DMMCHS) was prepared. TEA and di‐n‐butyl phthalate were used as a cocatalyst and an internal donor, respectively. DMMCHS was used as an external donor. The slurry polymerization of propylene was studied with the catalyst system in n‐heptane from 45 to 70°C. The effects of the TEA and H₂ concentrations, temperature, and monomer pressure on the polymerization were investigated. The optimum productivity was obtained at [Al]/[DMMCHS]/[Ti] = 61.7:6.2:1 (mol/mol/mol). The highest activity of the catalyst was obtained at 60°C. Increasing the H₂ concentration to 100 mL/L increased the productivity of the catalyst, but a further increase in H₂ reduced the activity of the catalyst. Increasing the propylene pressure from 1 to 7 bar significantly increased the polymer yield. The isotacticity index (II) decreased with increasing TEA, but the H₂ concentration, temperature, and monomer pressure did not have a significant effect on the II value. The viscosity‐average molecular weight decreased with increasing temperature and with the addition of H₂. Three catalysts with different Mg/Si molar ratios were studied under the optimum conditions. The catalyst with a Mg/Si molar ratio of approximately 0.93 showed the highest activity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1177–1181, 2003     

Effect of particle size and surface modification on mechanical properties of poly(para‐dioxanone)/inorganic particles

Poly(para‐dioxanone) (PPDO)‐based composites have been prepared by blending PPDO with three different types of CaCO₃ particles, CC1 (nano‐CaCO₃), CC2 (CaCO₃ whisker), and CC3 (silane‐coated CaCO₃ whisker). The effects of particles size, interface adhesion, and crystallinity of composites on mechanical properties were discovered through analysis of the morphology of fracture surfaces, thermal characteristics, and crystalline structure. DSC revealed that the CaCO₃ particles acted as a nucleating agent and promoted crystallinity of PPDO. The effect of CaCO₃ particles on crystallization of PPDO was clearly revealed by using the nucleating efficiency. Smaller size particles exhibit greater nucleating efficiency. Adhesion between PPDO and the CaCO₃ particles plays major roles on the mechanical properties of composites. The tensile strength of PPDO was improved over 54%. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Regulating the physical and biological performances of poly(p‐dioxanone) by copolymerization with L‐phenylalanine

The high crystallinity, low solubility in normal solvents, and low hydrophilicity of poly(p‐dioxanone) (PPDO) are unsuitable for the expansion of its biomedical applications. In order to circumvent these problems and induce biological properties, a series of poly(ester amide)s based on p‐(dioxanone) and l ‐phenylalanine were synthesized by copolymerization of p‐dioxanone with l ‐phenylalanine N‐carboxyanhydride monomers. The structures of the copolymers were confirmed by ¹H NMR. The crystallinity of the copolymers was investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). Increasing contents of phenylalanine resulted in decreased crystallinity owing to the rigid phenyl groups of phenylalanine, which disrupted the regularities of the chains, thus confining their movement. The synthesized copolymers were more soluble in chloroform than PPDO. Moreover, the copolymers were more hydrophilic and hydrolyzed more slowly than PPDO, as indicated by water angle contact measurements and in vitro hydrolysis studies. Especially, the copolymers showed inhibition on cell proliferation of L929 mouse fibroblasts by MTT assay, suggesting that the polymers might be useful in the areas where cell proliferation need to be inhabited such as adhesion prevention. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2311–2319, 2013