Synthesis of EP‐POSS mixture and the properties of EP‐POSS/epoxy,SiO2/epoxy,and SiO2/EP‐POSS/epoxy nanocomposite

The hybrid material of EP‐POSS mixture was synthesized by the hydrolysis and condensation of (γ‐glycidoxypropyl) trimethoxysilane. A series of binary systems of EP‐POSS/epoxy blends, epoxy resin modified by silica nanoparticles (SiO₂/epoxy), and ternary system of SiO₂/EP‐POSS/epoxy nanocomposite were prepared. The dispersion of SiO₂ in the matrices was evidenced by transmission electron micrograph, and the mechanical properties, that is, flexural strength, flexural modulus, and impact strength were examined for EP‐POSS/epoxy blends, SiO₂/epoxy, and SiO₂/EP‐POSS/epoxy, respectively. The fractured surface of the impact samples was observed by scanning electron micrograph. Thermogravimetry analysis were applied to investigate the different thermal stabilities of the binary system and ternary system by introducing EP‐POSS and SiO₂ to epoxy resin. The results showed that the impact strength, flexural strength, and modulus of the SiO₂/EP‐POSS/epoxy system increased around by 57.9, 14.1, and 44.0% compared with the pure epoxy resin, T_i, T_max and the residues of the ternary system were 387°C, 426°C, and 25.2%, increased remarkably by 20°C, 11°C and 101.6% in contrast to the pure epoxy resin, which was also higher than the binary systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 810‐819, 2013     

Preparation and characterization of styrene/styryl–polyhedral oligomeric silsesquioxane hybrid copolymers

BACKGROUND: Organic–inorganic nanocomposites were prepared by copolymerization of various monomers and polyhedral oligomeric silsesquioxane (POSS) derivatives. Preliminary results showed that styrene/styryl–POSS copolymers could be obtained using CpTiCl₃ catalyst. In the work reported here, the copolymerization of styrene and styryl‐substituted POSS was studied in detail for a more effective catalyst, Cp*TiCl₃. RESULTS: The glass transition temperature (T_g) of the copolymers prepared increased with increasing POSS content. The degradation temperature (T_d) of the copolymers was 60 °C higher than that of syndiotactic polystyrene under nitrogen. Although the thermal properties were improved by incorporation of POSS, the catalytic activity decreased with POSS content. The racemic triad and syndiotactic index of the copolymers decreased with increasing POSS content. Gel permeation chromatograms of the copolymers exhibited multimodal distribution due to the presence of multi‐active centres, which were formed by interaction of Ti with the POSS siloxane linkage. CONCLUSION: With the incorporation of POSS, the thermal properties of polystyrene were improved. The styrene/styryl–POSS copolymers are formed through the various active sites arising from the interactions of Ti with POSS. Copyright © 2008 Society of Chemical Industry     

Epoxy/POSS organic–inorganic hybrids: Viscoelastic,mechanical properties and micromorphologies

A series of epoxy resin (EP)/octa(aminpropyl)silsesquioxane (POSS‐NH₂) organic–inorganic hybrid composites (EP/POSS‐NH₂ 100/0, 95/5, 90/10, and 80/20 wt/wt) were prepared by melt casting and then curing. Viscoelastic and mechanical properties of these composites were studied by dynamic mechanical analysis and mechanical testing, respectively. Scanning electron microscopy was used to study of the micromorphologies of the composites and to elucidate the toughening mechanisms of POSS‐NH₂. POSS units incorporated into the epoxy network showed good compatibility with the resin matrix. Phase separation was not observed even at high POSS content (20 wt%). Incorporation of POSS macromer into the epoxy network after curing increased the glass transition temperature, slightly narrowed the temperature range widths of the glass transition, and lowered the intensities of their loss moduli peaks of the resultant composites. The glass transition temperature of EP/POSS‐NH₂ composites increased significantly with increasing POSS content at lower POSS content (<10 wt%), while increased slightly at higher POSS content. Both impact and flexural strengths of the hybrids reached their optimum values when 10 wt% content of POSS was introduced. POLYM. COMPOS., 28:175–179, 2007. © 2007 Society of Plastics Engineers.     

Star‐shaped POSS–methacrylate copolymers with phenyl–triazole as terminal groups,synthesis, and the pyrolysis analysis

Star‐shaped polyhedral oligomeric silsesquioxane (POSS)–methacrylate hybrid copolymers with phenyl–triazole as terminal groups had been designed and synthesized via sequential atom transfer radical polymerization (ATRP), azidation, and phenylacetylene‐terminated procedures, and the hybrid copolymers here could be denoted as POSS–(PXMA‐Pytl)₈, where X can be M, B, L, and S, represented four different methacrylate monomers, such as methacrylate (MMA), butyl methacrylate (BMA), lauryl methacrylate (LMA), and stearyl methacrylate (SMA), respectively. Thermal gravimetric analysis (TGA) and in situ Fourier transform infrared spectroscopy (FTIR) were applied for studying the thermal stability and degradation mechanism, and it was found that all of the POSS–(PXMA‐Cl)₈ and POSS–(PXMA‐Pytl)₈ copolymers exhibited excellent thermal stabilities, which had great potential in heat‐resistant material application. Different tendencies of decomposition temperatures at 5% and 10% weight loss (T₅ and T₁₀) dependent on the side‐chain length and terminal group species were investigated respectively. The longer alkyl side chains of the monomers, the lower thermal stabilities, and enhanced T₅ and T₁₀ were also shown with the introduction of phenyl–triazole groups instead of chlorine groups. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40652.     

The effect of curing cycles on curing reactions and properties of a ternary system based on benzoxazine,epoxy resin,and imidazole

A ternary blend (BEM) of benzoxazine (BA‐a), epoxy resin (E44), and imidazole (M) was prepared to study the effect of different curing cycles on curing reactions and properties of cured resins. Reactivity of two binary blends, E44 and BA‐a, with the catalyst M, was first investigated based on the curing kinetics. Results suggest that E44/M has lower reaction activation energy than BA‐a/M meaning the reaction of E44/M easily proceeds. To further figure out the sequences of the curing reactions of E44, BA‐a, and M in BEM, the curing behaviors of three BEM gels at 80, 140, and 180°C (defined as BEM‐80g, BEM‐140g, and BEM‐180g) were studied by DSC and FTIR techniques. For BEM‐80g, E44/M cured before BA‐a/M. For BEM‐180g, both curing reactions occurred simultaneously and the copolymerization of BA‐a and E44 was promoted. The crosslinked structures of cured BEM with different initial curing temperatures were strongly influenced by the reaction sequences. The T_gs, flexural properties and thermal stability of the copolymers with different curing cycles were compared. Good performance of this ternary system can be obtained by choosing suitable curing cycles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of oxirane groups on curing behavior and thermal stability of vinyl ester resins

The effects of oxirane groups in vinyl ester (VE) resin and reactive diluent on curing characteristics and thermal behavior of cured resins are described. Stoichiometric (0.5:1, sample A) as well as nonstoichiometric (0.5:0.85, sample B) ratios of the diglycidyl ether of bisphenol-A (DGEBA) and methacrylic acid (MA) were used for the synthesis of VE resins. Resin sample B had more residual epoxy groups because of the stoichiometric imbalance of the reactants. VE resins thus obtained were diluted with methyl methacrylate (MMA; 1:1, w/w), and controlled quantities of epoxy groups were introduced by partial replacement of MMA with glycidyl methacrylate (GMA), keeping the overall ratio of resin and reactive diluent constant. Increase of GMA content in resin A or B resulted in a decrease in gel time, indicating that the curing reaction is facilitated by the presence of epoxy groups. An increase in initiator content also reduced the gel time. In the differential scanning calorimetry (DSC) scans, a sharp curing exotherm was observed in the temperature range 107 ± 3–150 ± 1 °C. The onset temperature (T_onset) and peak exotherm temperature (T_exo) decreased with increase in GMA content. Heat of curing (ΔH) also increased with increase in GMA content. A broad exotherm was observed after the initial sharp exotherm that was attributed to the etherification reaction. Cured VE resins were stable up to 250–260 °C, and started losing weight above this temperature. Rapid decomposition was observed in the temperature range 400–500 °C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 416–423, 2001     

Curing and Morphology of BPA Epoxy Resin/LC Epoxy Resin PEPEB Composites

Liquid crystalline epoxy resin (LC epoxy resin) – p-phenylene di{4-[2-(2,3-epoxypropyl)ethoxy]benzoate} (PEPEB) was synthesized. The mixture of PEPEB with bisphenol-A epoxy resin (BPAER) was cured with a curing agent 4,4-diamino-diphenylmethane (DDM). The curing process and thermal behavior of this system were investigated by differential scanning calorimeter (DSC) and torsional braid analysis (TBA). The morphological structure was measured by polarizing optical microscope (POM) and scanning electron microscope (SEM). The results show that the initial curing temperature Ticu (gel point) of this system is 68.1°C, curing peak temperature T _pcu is 102.5°C, and the disposal temperature T _fcu is 177.6°C. LC structure was fixed in the cured epoxy resin system. The curing kinetics was investigated by dynamic DSC. Results showed that the curing reaction activation energy of BEPEB/BPAER/DDM system is 22.413 kJ/mol. The impact strength is increased 2.3 times, and temperature of mechanical loss peak is increased to 23°C than the common bisphenol-A epoxy resin, when the weight ratio of BEPEB with BPAER is 6 100.     

Photoinitiated graft copolymerization of glycidyl methacrylate and 2-hydroxyethyl methacrylate onto polyacrylonitrile and application of the synthesized graft copolymers in penicillin–amidase immobilization

The photoinitiated graft copolymerization of hydroxyethyl methacrylate and/or glycidyl methacrylate onto polyacrylonitrile (PAN) and the applicability of the matrices synthesized in this way for penicillin–amidase immobilization are discussed. The copolymers are prepared by putting irradiated PAN fibers with preliminary adsorbed benzophenone on them into the polymerization feed that includes hydroxyethyl methacrylate and/or glycidyl methacrylate dissolved in a water–methyl ethyl ketone mixture. The degree of grafting varies between 11.7 and 46.0%, and its efficiency, between 27.8 and 78.9%. The concentration of epoxy groups in the synthesized copolymers is in the range between 210 and 2220 μmol/g. The reactivity ratios of the two comonomers are determined to be r_GM = 0.70 ± 0.15 and r_HEMA = 2.73 ± 0.14. The grafted copolymers containing HEMA units provide milder conditions for penicillin–amidase covalent binding. The optimum pH and temperature values of penicillin–amidase immobilized on these matrices are 7.5 and 45°C, respectively. © 1994 John Wiley & Sons, Inc.     

Incorporation of metallic POSS,POSS copolymers,and new functionalized POSS compounds into commercial dental resins

An array of polyhedral oligomeric silsesquioxane (POSS) compounds, including metal, methacrylate, and amine functional POSS, and POSS copolymers were incorporated into aromatic and aliphatic dental resins. Heptaphenyl‐propylamine POSS and methacrylate derivatives were synthesized by corner‐capping and Michael addition reactions, respectively. The POSS compounds were tested for solubility in commercial resins at concentrations of 1, 5, 10, and 15 wt %, followed by UV polymerization of all soluble combinations. The POSS compounds generally increased modulus and had an unpredictable effect on T_g. The modulus of the aliphatic resin increased 83% by incorporation of 15 wt % aluminum‐phenyl POSS, while aromatic resins saw a maximum modulus improvement of 18% at 30°C and 72% at 160°C by incorporating 1 wt % of heptaphenyl‐methacrylate POSS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2856–2862, 2006     

Ternary nanocomposites: Curing,morphology, and mechanical properties of epoxy/thermoplastic/organoclay systems

The influence of two organically modified montmorillonites on the curing, morphology and mechanical properties of epoxy/poly(vinyl acetate)/organoclay ternary nanocomposites was studied. The organoclays and poly(vinyl acetate) (PVAc) provoked contrary effects on the epoxy curing reaction. Ternary nanocomposites developed different morphologies depending on the PVAc content, that were similar to those observed in the epoxy/PVAc binary blends. The organoclays were only located in the epoxy phase independently of the morphology. All nanocomposites showed intercalated structures with similar clay interlayer distances. Both PVAc and organoclays lowered the T_g of the epoxy phase, the presence of clays did not influence the T_g of the PVAc phase. The addition of the organoclays to the epoxy improved stiffness but lowered ductility while the adition of PVAc improved toughness although reduced stiffness of epoxy thermoset. Ternary nanocomposites exhibited optimal properties that combine the favourable effects of the clay and the thermoplastic. POLYM. COMPOS., 37:2184–2195, 2016. © 2015 Society of Plastics Engineers     

Synthesis of a novel difunctional NLO azo‐dye chromophore and characterizations of crosslinkable copolymers with stable electrooptic properties

The synthesis and the nonlinear optical (NLO) properties of crosslinkable copolymers based on a novel NLO azo‐dye chromophore bearing two functions: one used the free‐radical copolymerization, that is, the methacrylate group, and the other one used for the crosslinking process, that is, the carboxylic acid function, are described. Copolymerization of this new monomer with glycidyl methacrylate leads to novel soluble crosslinkable NLO copolymers bearing free epoxy and carboxylic groups. The poling process, before crosslinking, is achieved at a temperature (T_p) close to the glass transition temperature, T_g (<70°C), of the copolymers. At this temperature, no reaction takes place between epoxy and carboxylic acid functions. In fact, crosslinking begins to start at a higher temperature, T_c (T_c ≫ T_p ≈ T_g). After the optimization of the poling and crosslinking processes, the NLO crosslinked polymer with 30 mol % of the chromophore exhibits a T_g of 157°C and a high quadratic susceptibility (d₃₃) of 30 pm/V at 1320 nm. This coefficient is stable at 85°C for several weeks. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 974–982, 1999     

Transmission electron microscopy study of room temperature cured PMMA grafted natural rubber toughened epoxy/layered silicate nanocomposite

Abstract

A morphological study was conducted on ternary systems containing epoxy, poly(methyl methacrylate) grafted natural rubber and organic chemically modified montmorillonite (Cloisite 30B), using TEM. The following four materials were prepared at room temperature: cured unmodified epoxy, cured toughened epoxy, cured unmodified epoxy/Cloisite 30B nanocomposites and cured toughened epoxy/Cloisite 30B nanocomposites. Mixing process was performed by mechanical stirring. Poly(etheramine) was used as the curing agent. The detailed TEM images revealed cocontinuous and dispersed spherical rubber in the epoxy–rubber blend, suggesting a new proposed mechanism of phase separation. High magnification TEM analysis showed good interactions between rubber and Cloisite 30B in the ternary system. In addition, it was found that rubber particles could enhance the separation of silicate layers.     

Epoxy nanocomposites with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane

The POSS-containing nanocomposites of epoxy resin were prepared via the co-curing reaction between octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane (OpePOSS) and the precursors of epoxy resin. The curing reactions were started from the initially homogeneous ternary solution of diglycidyl ether of bisphenol A (DGEBA), 4,4′-Diaminodiphenylmethane (DDM) and OpePOSS. The nanocomposites containing up to 40 wt% of POSS were obtained. The homogeneous dispersion of POSS cages in the epoxy matrices was evidenced by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM) and atomic force microscopy (AFM). Differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) showed that at the lower POSS concentrations (<30 wt%) the glass transition temperatures (T_gs) of the nanocomposites almost remained invariant whereas the nanocomposites containing POSS more than 40 wt% displayed the lower T_gs than the control epoxy. The DMA results show that the moduli of the nanocomposites in glass and rubbery states are significantly higher than those of the control epoxy, indicating the nanoreinforcement effect of POSS cages. Thermogravimetric analysis (TGA) indicates that the thermal stability of the polymer matrix was not sacrificed by introducing a small amount of POSS, whereas the properties of oxidation resistance of the materials were significantly enhanced. The improved thermal stability could be ascribed to the nanoscaled dispersion of POSS cages and the formation of tether structure of POSS cages with epoxy matrix.     

Thermal degradation analysis of the isocyanate polyhedral oligomeric silsequioxanes (POSS)/sulfone epoxy nanocomposite

The sulfone epoxy (SEP)/polyhedral oligomeric silsesquioxane (POSS) nanocomposite contains bulky POSS side chains was studied in this research. Its glass transition temperature (T_g) decreases with the bulky POSS content, indicating that the bulky POSS side chains could not only generate the oligomers but also interrupt the network architectures of SEP. Homogeneous and uniform dispersion of POSS in SEP matrix can be obtained through the carbamate/oxazolidon covalent linkage, which is evidenced by scanning electron microscopy. The increasing concentration of POSS into SEP exhibits an increase of char yield in the nanocomposites, indicating that the POSS segments provide the antithermal‐oxidation effect for SEP/POSS, thereby inhibiting thermal degradation under open air at high temperatures. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Nonisothermal cocuring behavior and kinetics of epoxy resin/3‐glycidyloxypropyl‐POSS with MeTHPA

3‐Glycidyloxypropyl‐polyhedral oligomeric silsesquioxanes (G‐POSS) was prepared from 3‐glycidyloxypropyl‐trimethoxysilane (GTMS) by hydrolytic condensation. The cocuring behavior and kinetics of G‐POSS with bisphenol‐A epoxy resin (BPAER) using 3‐methyl‐tetrahydrophthalic anhydride (MeTHPA) as curing agent were investigated by nonisothermal differential scanning calorimetry (DSC) and torsional braid analysis (TBA). The face distribution of silicon in the cured products was characterized by energy dispersive X‐ray spectrometry (EDS). The results show that the compatibility of G‐POSS with BPAER is very well and can cocure. The curing mechanism was proposed. The relationship of E_a and conversion α can be obtained by the isoconversional method of Kissinger. These curing reactions can be described by the Šesták–Berggren (S–B) equation and can be depicted by the following equation: . TBA analysis indicated that T_g was decreased when the contents of G‐POSS is over to 30 wt%. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Curing reactions and properties of organic–inorganic composites from hydrogenated carboxylated nitrile rubber and epoxycyclohexyl polyhedral oligomeric silsesquioxanes

Novel organic–inorganic composites were prepared by curing hydrogenated carboxylated nitrile rubber (HXNBR) with epoxycyclohexyl polyhedral oligomeric silsesquioxanes (POSS) through chemical bonding of carboxyl groups of HXNBR and epoxy groups of POSS. The process of the curing reaction was investigated using in situ Fourier transform infrared spectroscopy. The reaction order, the activation energy and the frequency factor were obtained through a kinetic analysis using differential scanning calorimetry. Through dynamic mechanical analysis, the glass transition temperature, crosslink density and degree of heterogeneity of the composites were estimated, and they showed an increasing tendency with increasing POSS content. The results of dielectric property measurements showed that the dielectric constant of the composites decreased with increasing POSS content in the studied frequency range. Copyright © 2010 Society of Chemical Industry     

Intercalation and exfoliation behavior of epoxy resin/curing agent/montmorillonite nanocomposite

The epoxy resin/curing agent/montmorillonite nanocomposite was prepared by a casting and curing process. The intercalation and exfoliation behaviors of epoxy resin in the presence of organophilic montmorillonite were investigated by X‐ray diffraction (XRD) and dynamic mechanical thermal analysis (DMTA). For the diethylenetriamine curing agent, the intercalated nanocomposite was obtained; and the exfoliated nanocomposite would be formed for tung oil anhydride curing agent. The curing condition does not affect the resulting kind of composite, both intercalation or exfoliation. For intercalated nanocomposite, the glass transition temperature T_g, measured by DMTA and affected by the curing temperature of matrix epoxy resin is corresponded to that of epoxy resin without a gallery. The α′ peak of the loss tangent will disappear if adding montmorillonite into the composite. It was also found that the T_g of the exfoliated nanocomposite decreases with increasing montmorillonite loading. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 842–849, 2002; DOI 10.1002/app.10354     

Phase-separated structures of random methacrylate copolymers with pendant POSS moieties

The phase separation of random methacrylate copolymers with the pendant polyhedral oligomeric silsesquioxanes (POSS) moieties was studied. For the random copolymers of the phenyl-substituted POSS methacrylate (PhPOSSMA) and butyl methacrylate (BMA), the layer-like phase-separated structures were obtained from the copolymers with over circa 20 wt % of PhPOSSMA after thermal annealing in the bulk. The copolymers with larger PhPOSSMA content over 40 wt % showed periodic phase-separated structure with the periodic length ranging from 9.0 to 5.1 nm depending on the composition. The phase separation did not occur by solvent annealing in the bulk. On the other hand, no phase-separated structure was formed from the random copolymer with circa 50 wt % of isobutyl-substituted POSSMA (i-BuPOSSMA) and BMA after thermal annealing. In addition, the phase separation did not occur for both of the random copolymers of PhPOSSMA and i-BuPOSSMA with methyl methacrylate. The resulting phase-separated structures were well characterized by using wide-angle X-ray scattering, small-angle X-ray scattering, and transmission electron microscopy image. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47246.     

Reactivity, viscoelastic behaviour and mechanical performances of hybrid systems based on epoxy resins and reactive polyhedral oligosilsesquioxanes

An epoxy formulation was modified by adding various amounts of an epoxy functionalized polyhedral oligomeric silsesquioxane (POSS). The obtained networks were characterized in terms of reactivity, viscoelastic behaviour and mechanical properties. Spectroscopy measurements by FT-NIR demonstrated that the epoxy groups of POSS were almost as reactive as those of the DGEBA in the curing stage, while in the post-curing a lower reactivity of the latter was found, possibly due to steric hindrance effects. The dynamic-mechanical analysis showed an increase in the storage modulus in both glassy and rubbery regions. On the other hand, T_g and T_β decreased with POSS content. The viscoelastic analysis showed that the addition of POSS enhanced the free volume and the tendency of the network to undergo thermal expansion. In particular, the β transition was made increasingly localized by increasing the POSS content. With respect to mechanical performances, the yield process was facilitated by incorporation of the POSS nanocages within the network, possibly due to an enhancement of the chain mobility. Fracture measurements showed an improvement of the parameters K_c and G_c up to 5 wt% of POSS, after which a decrease of toughness was observed. These results were supported by a fractographic analysis.     

Studies on the curing behavior,thermal, and mechanical properties of epoxy resin-co-amine-functionalized lead phthalocyanine

A high performance copolymer was prepared by using epoxy (EP) resin as matrix and 3,10,17,24-tetra-aminoethoxy lead phthalocyanine (APbPc) as additive with dicyandiamide as curing agent. Fourier-transform infrared spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetric analysis (DSC), and thermogravimetric analysis (TGA) were used to study the curing behavior, curing kinetics, dynamic mechanical properties, impact and tensile strength, and thermal stability of EP/APbPc blends. The experimental results show that APbPc, as a synergistic curing agent, can effectively reduce the curing temperature of epoxy resin. The curing kinetics of the copolymer was investigated by non-isothermal DSC to determine kinetic data and measurement of the activation energy. DMA, impact, and tensile strength tests proved that phthalocyanine can significantly improve the toughness and stiffness of epoxy resin. Highest values were seen on the 20 wt% loading of APbPc in the copolymers, energy storage modulus, and impact strength increased respectively 388.46 MPa and 3.6 kJ/m², T_g decreased 19.46°C. TGA curves indicated that the cured copolymers also exhibit excellent thermal properties.