共查询到20条相似文献,搜索用时 31 毫秒
1.
Haijia Su Qiang Li Tianwei Tan 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2006,81(11):1797-1802
A new chitosan molecular imprinted adsorbent obtained by immobilization of nano‐TiO2 on the adsorbent surface (surface‐imprinted adsorbent with nano‐TiO2) was prepared. Based on photocatalytic reaction and the surface molecular imprinting technology, this new kind of surface‐imprinted adsorbent with immobilization of nano‐TiO2 can not only adsorb template metal ions but can also degrade organic pollutants. The results showed that, after the nano‐TiO2 was immobilized on the adsorbent surface, the adsorption ability for the imprinted ion (Ni2+) of this new imprinted adsorbent immobilized with nano‐TiO2 was not affected, but the degradation ability for p‐nitrophenol (PNP) of the surface‐imprinted adsorbent with nano‐TiO2 increased three‐fold compared with that of the surface‐imprinted adsorbent without nano‐TiO2, from 23.8 to 76.1% (at an initial PNP concentration of 20 mg·dm?3). The optimal TiO2 concentration in the adsorbent preparation was 0.025 g·TiO2 g?1 adsorbent. The removal capacity for PNP reached 60.25 mg·g?1 (at 400 mg·dm?3 initial PNP concentration) under UV irradiation. The surface‐imprinted adsorbent with nano‐TiO2 can be reused for at least five cycles without decreasing the removal ability for PNP and the imprinted ion (Ni2+). Copyright © 2006 Society of Chemical Industry 相似文献
2.
This study focuses on an improved synthesis of a branched poly (ethylene imine) (PEI)‐modified cellulose‐based adsorbent (Cell‐g‐PGMA‐PEI). We aim to improve the adsorbent capacity by reducing side reaction of epoxide ring opening during graft copolymerization of glycidyl methacrylate (GMA) onto cellulose which increases the content of epoxy groups, anchors to immobilize branched PEI moieties. FTIR spectra provided the evidence of successful graft copolymerization of GMA onto cellulose initiated by benzoyl peroxide (BPO) and modification with PEI. The amount of epoxy groups of Cell‐g‐PGMA was 4.35 mmol g?1 by epoxy titration. Subsequently, the adsorption behavior of Cu(II) on cell‐g‐PGMA‐PEI in aqueous solution has been investigated. The data from the adsorption kinetic experiments agreed well with pseudo‐second‐order model. The adsorption isotherms can be interpreted by the Langmuir model with the maximum adsorption capacity of 102 mg g?1 which was largely improved compared with the similar adsorbent reported. The dynamic adsorption capacity obtained from the column tests was 119 mg g?1 and the adsorbent could be regenerated by HCl of 0.1 mol L?1. Results indicate that the novel pathway for the synthesis of Cell‐g‐PGMA‐PEI exhibits significant potential to improve the performance of adsorbents in removal and recovery of Cu(II) from aqueous solution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 相似文献
3.
A magnetic nanocomposite of citric‐acid‐functionalized graphene oxide was prepared by an easy method. First, citric acid (CA) was covalently attached to acyl‐chloride‐functionalized graphene oxide (GO). Then, Fe3O4 magnetic nanoparticles (MNPs) were chemically deposited onto the resulting adsorbent. CA, as a good stabilizer for MNPs, was covalently attached to the GO; thus MNPs were adsorbed much more strongly to this framework and subsequent leaching decreased and less agglomeration occurred. The attachment of CA onto GO and the formation of the hybrid were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction spectrometry and transmission electron microscopy. The specific saturation magnetization of the magnetic CA‐grafted GO (GO‐CA‐Fe3O4) was 57.8 emu g?1 and the average size of the nanoparticles was found to be 25 nm by transmission electron microscopy. The magnetic nanocomposite was employed as an adsorbent of methylene blue from contaminated water. The adsorption tests demonstrated that it took only 30 min to attain equilibrium. The adsorption capacity in the concentration range studied was 112 mg g?1. The GO‐CA‐Fe3O4 nanocomposite was easily manipulated in an external magnetic field which eases the separation and leads to the removal of dyes. Thus the prepared nanocomposite has great potential in removing organic dyes. © 2014 Society of Chemical Industry 相似文献
4.
The mechanism of copper adsorption by polyvinyl polyacrylate (PVPA) was examined using ESR and magnetic measurements. The copper adsorption by PVPA obeyed Langmuir adsorption isotherm with the maximum adsorption amounts of 4.17 mmol g?1 adsorbent, being larger than those of uranium adsorption. Though copper in the solution was completely adsorbed by the resin above pH 4, the ESR intensity was remained low level and only increased above pH 8. The ESR spectrum of Cu(II) ion in PVPA are axial type with tetragonally distorted octahedral symmetry, having parameters of g⊥ = 2.361, g? = 2.057, |A⊥| = 14.0 m cm?1 (pH 5), and g⊥ = 2.329, g? = 2.058, |A⊥| = 16.2 m cm?1, |A?| = 2.7 m cm?1 (pH 9). The absorption peaks originated from Cu(II)–Cu(II) dimer was also observed (pH 5). The paramagnetic susceptibility of PVPA adsorbed Cu(II) ion at pH 5 explained by the dimer model with |J| = 220 K. These results suggested that most of copper was adsorbed and formed dimer in PVPA, being similar to that in Cu(II)‐acetate monohydrate. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5372–5377, 2006 相似文献
5.
Functionalised SBA‐15 mesoporous silica with polyamidoamine groups (PAMAM‐SBA‐15) was successfully prepared with the structure characterised by X‐ray diffraction, nitrogen adsorption–desorption, Fourier transform infrared spectra and thermogravimetric analysis. PAMAM‐SBA‐15 was applied as adsorbent for Cu(II), Pb(II) and Cd(II) ions removal from aqueous solution. The effects of the solution pH, adsorbent dosage and metal ion concentration were studied under the batch mode. The Langmuir model was fitted favourably to the experimental data. The maximum sorptive capacities were determined to be 1.74 mmol g?1 for Cu(II), 1.16 mmol g?1 for Pb(II) and 0.97 mmol g?1 for Cd(II). The overall sorption process was fast and its kinetics was fitted well to a pseudo‐first‐order kinetic model. The mean free energy of sorption, calculated from the Dubinin–Radushkevich isotherm, indicated that the sorption of lead and copper, with E > 16 kJ mol?1, followed the sorption mechanism by particle diffusion. The adsorbent could be regenerated three times without significant varying its sorption capacity. A series of column tests were performed to determine the breakthrough curves with varying bed heights and flow rates. The breakthrough data gave a good fit to the Thomas model. Maximum sorption capacity of 1.6, 1.3 and 1.0 mmol g?1 were found for Cu(II), Pb(II) and Cd(II), respectively, at flow rate of 0.4 mL min?1 and bed height of 8 cm, which corresponds to 83%, 75% and 73% of metallic ion removal, respectively, which very close to the value determined in the batch process. Bed depth service time model could describe the breakthrough data from the column experiments properly. © 2012 Canadian Society for Chemical Engineering 相似文献
6.
Preparation and characterization of selective phenyl thiosemicarbazide modified Au(III) ion‐imprinted cellulosic cotton fibers
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
In this study, a novel selective Au(III) chelating surface ion imprinted fibers based on phenyl thiosemicarbazide modified natural cotton (Au‐C‐PTS) has been synthesized, and applied for selective removal of Au(III) from aqueous solutions. Batch adsorption experiments were performed with various parameters, such as contact time, pH, initial Au(III) concentration, and temperature. The kinetic studies revealed that the adsorption process could be described by pseudo‐second‐order kinetic model, while the adsorption data correlated well with the Langmuir and Freundlich models. The maximum adsorption capacities calculated from the Langmuir equation are 140 ± 1 mg g?1 and 72 ± 1 mg g?1 at pH 5 for both Au‐C‐PTS and NI‐C‐PTS, respectively. The estimated thermodynamic parameters (Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy change (ΔS°)) indicated the spontaneity and exothermic nature of the adsorption process. Furthermore, the selectivity study revealed that the ion imprinted fibers was highly selective to Au(III) compared with Cu(II), Cd(II), Hg(II), and Fe(III). The adsorbent was successfully regenerated with a 0.1M HNO3 solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40769. 相似文献
7.
Poly(barbituric acid) functionalized magnetic nanoparticles with excellent adsorption behavior were facilely synthesized through one‐step chemical oxidation polymerization method by using sodium borohydride as the reducing agent. Structure, morphology, and magnetism of the products were thoroughly investigated by means of FTIR, FESEM, EDX, X‐ray photoelectron spectra, thermogravimetric analyzer–differential scanning calorimetry, and vibrating sample magnetometer. The products were of a sphere‐shaped nanostructure with the saturation magnetization value of 7.5 emu g?1, which make them reusable for adsorption application. Removal capability for heavy metal ions were systematically evaluated using Pd (II) and Cu (II) ions as the models. The maximum sorption capacities by applying the Langmuir equation were calculated to be 166.6 mg/g for Cu (II) and 142.8 mg/g for Pb (II). A recycle test revealed that the PBA‐MNPs have above 87.1% for Cu (II) and 82.69% for Pb (II) ion desorption efficiency after the three regeneration cycle process. All the above experimental results demonstrated that barbituric acid‐based material could be used as a possible adsorbent for the efficient removal of heavy metals from aqueous solution. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40957. 相似文献
8.
Shu‐Guang Wang Yue Ma Yi‐Jing Shi Wen‐Xin Gong 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2009,84(7):1043-1050
BACKGROUND: The present study has concentrated on investigating the fluoride removal potential of nano‐scale aluminum oxide hydroxide (nano‐AlOOH). A series of batch adsorption experiments were carried out to assess parameters that influence the adsorption process. The different parameters investigated include the effect of contact time, initial fluoride concentration, adsorbent dose, pH of the solution and co‐existing anions. RESULTS: Most of the adsorption took place during the first 30 min and kinetic and equilibrium adsorption data show that the process obeys a pseudo‐second‐order kinetic equation and the Langmuir adsorption model. The fluoride removal efficiency is greater than 90% between pH 6 and 8 and decreases as pH values increase to 11. The presence of SO42? or PO43? in aqueous solution was found to reduce the fluoride uptake. Desorption studies showed that the fluoride can easily be desorbed at pH 13. CONCLUSION: Nano‐AlOOH possesses a maximum fluoride capacity of 3259 mg F? kg?1, which is comparable with that of activated alumina. Maximum adsorption occurred at around pH 7, which makes nano‐AlOOH a potential adsorbent for drinking water treatment. Copyright © 2009 Society of Chemical Industry 相似文献
9.
Ru Wang Xue‐pin Liao Shi‐lin Zhao Bi Shi 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2006,81(7):1301-1306
The adsorption behavior of collagen fiber‐immobilized bayberry tannin towards Bi(III) at acidic pH values was investigated. The adsorption capacity of the adsorbent towards Bi(III) was 0.348 mmol g?1 at 303 K, and increased with the rise in temperature. The adsorption isotherms of Bi(III) were in the shape of so‐called type II isotherms and could be described by an empirical equation, ln qe = k + (1/n)Ce, which implies that chemical adsorption is predominant at lower concentrations of Bi(III) and that physical adsorption is involved at higher concentrations. The adsorption kinetics of Bi(III) on the immobilized bayberry tannin could be well described by the pseudo‐second‐order rate model, and the adsorption capacities calculated by the model were almost the same as those determined by actual measurements. The adsorbent could be regenerated by using 0.02 mol dm?3 ethylenediaminetetraacetic acid (EDTA) solution after adsorption of Bi(III). The adsorption selectivity of the immobilized bayberry tannin towards Bi(III) in a Cu(II)–Bi(III) binary solution in acidic medium was remarkable. Therefore, it is strongly suggested that the immobilized bayberry tannin could be applied to the removal of Bi(III) from crude Cu(II) samples under proper conditions. Copyright © 2006 Society of Chemical Industry 相似文献
10.
A novel porous nanocomposite of aminated silica MCM‐41 and nylon‐6: Isotherm,kinetic, and thermodynamic studies on adsorption of Cu(II) and Cd(II)
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Porous amine‐modified MCM‐41/Nylon‐6 nanocomposite (NH2‐MCM‐41/NY6 NC) was synthesized by a facile solution casting protocol, which was used as an effective adsorbent for the removal of Cu(II) and Cd(II) from aqueous media. The physicochemical properties of NH2‐MCM‐41/NY6 NC were studied by scanning and transmission electron microscopies, thermogravimetric analysis, etc. The influence of pH, adsorbent dose, contact time and initial concentration on adsorption performance were investigated in detail. Kinetic and isotherm parameters were evaluated and the data fitted well to the pseudo‐second order and Freundlich isotherm model, respectively. The maximum adsorption capacities of Cu(II) and Cd(II) were about 35.84 and 27.5 mg·g?1, respectively. The Kd of NH2‐MCM‐41/NY6 NC for Cu(II) (> ) and Cd(II) (> ) ions uptake in aqueous solution, showed very good values. Thermodynamic parameters suggest that the adsorption is a spontaneous process with an endothermic nature. According to the results obtained, we conclude that this novel porous NH2‐MCM‐41/NY6 NC could be used for the removal of heavy metal ions from an aqueous solution. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45383. 相似文献
11.
Thayyath Sreenivasan Anirudhan Lekshmi Divya Jayasree Parvathy 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2013,88(5):878-886
BACKGROUND: The main aim of this study is to determine the sorptive potential of a novel anion exchanger, Fe(III)‐coordinated amino‐functionalized poly(glycidylmethacrylate)‐grafted TiO2‐densified cellulose (AM‐Fe‐PGDC) for arsenic(V) removal from aqueous solutions by batch technique. RESULTS: The adsorbent was characterized using infrared spectroscopy, powder X‐ray diffraction, scanning electron microscopy, thermogravimetry and potentiometric titrations. The effective pH for removal was 6.0. The adsorption rate was influenced by initial metal ion concentration and contact time. The equilibrium was achieved within 1.5 h and follows a pseudo‐second‐order kinetic model. The adsorption capacity for As(V) calculated using the Langmuir isotherm equation was 105.47 mg g?1. The AM‐Fe‐PGDC developed was used to remove As(V) from simulated groundwater. Regeneration experiments were attempted for four cycles using 0.1 mol L?1 NaCl solution. CONCLUSION: It was found that AM‐Fe‐PGDC is very efficient for the removal of As(V) from aqueous solutions. © 2012 Society of Chemical Industry 相似文献
12.
Radmila V. Hercigonja Danijela D. Maksin Aleksandra B. Nastasović Snežana S. Trifunović Pavle B. Glodić Antonije E. Onjia 《应用聚合物科学杂志》2012,123(2):1273-1282
The possibility of sorption of technetium‐99 in the form of pertechnetate anion (TcO4?) and the sorption kinetics for removing TcO4? from aqueous solution by chelating polymers based on glycidyl methacrylate (GMA) were investigated. Two samples of macroporous crosslinked poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) (PGME), with different amount of the crosslinker (ethylene glycol dimethacrylate, EGDMA), were synthesized by suspension copolymerization and functionalized with diethylene triamine (deta). We propose that nonspecific sorption of pertechnetate anion via electrostatic interactions takes place at the protonated amino groups of macroporous crosslinked copolymer. The results of batch experiments performed at pH 1–14 showed fast sorption kinetics for removing TcO4? by amino‐functionalized PGME‐deta in a wide range of pH, that is, from 1.0 to 9.0. Almost complete removal of TcO4? (91–98%) was reached within 180 min in the stated pH range (1.0–9.0), with the sorption half‐times of under 25 min. The partitioning coefficients of linear adsorption isotherms, with 180‐min equilibrium time, reach the high values of 2130 mL g?1 and 1698 mL g?1 for the two samples of synthesized PGME‐deta. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
13.
E.I. Unuabonah K.O. Adebowale 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2009,84(11):1726-1735
BACKGROUND: Most adsorption studies consider only the adsorption of pollutants onto low cost adsorbents without considering how equilibrium and kinetic data can be optimized for the proper design of adsorption systems. This study considers the optimization of kinetic data obtained for the removal of Pb(II) from aqueous solution by a tripolyphosphate modified kaolinite clay adsorbent. RESULTS: Modification of kaolinite clay with pentasodium tripolyphosphate increases its cation adsorption capacity (CEC) and specific surface area (SSA) from 7.81 to 78.9 meq (100 g)?1 and 10.56 to 13.2 m2 g?1 respectively. X‐ray diffraction patterns for both unmodified and tripolyphosphate‐modified kaolinite clay suggest the modification is effective on the surface of the clay mineral. Kinetic data from the batch adsorption of Pb(II) onto the tripolyphosphate‐modified kaolinite clay adsorbent were optimized to a two‐stage batch adsorption of Pb(II) using the pseudo‐second‐order kinetic model. Mathematical model equations were developed to predict the minimum operating time for the adsorption of Pb(II). Results obtained suggest that increasing temperature and decreasing percentage Pb(II) removal by the adsorbent enhanced operating time of the adsorption process. The use of two‐stage batch adsorption reduces contact time to 6.7 min from 300 min in the single‐stage batch adsorption process for the adsorption of 2.5 m3 of 500 mg L?1 Pb(II) under the same operating conditions. CONCLUSION: Results show the potential of a tripolyphosphate‐modified kaolinite clay for the adsorption of Pb(II) from aqueous solution and the improved efficiency of a two‐stage batch adsorption process for the adsorption of Pb(II) even at increased temperature. Copyright © 2009 Society of Chemical Industry 相似文献
14.
A novel adsorbent for Hg(II), mercapto‐functionalized alkali lignin (AL‐SH) was synthesized by Friedel–Crafts alkylation reaction and nucleophilic substitution reactions. The adsorbent was characterized by the techniques of Fourier transform‐infrared spectroscopy (FT‐IR), elementary analysis and thermogravimetric analysis, and N2 adsorption techniques. The effect of various parameters on Hg(II) adsorption process such as initial pH, contact time, ionic strength, initial Hg(II) concentration, temperature, and adsorbent dosage were investigated in detail through batch static experiments. The results indicated that the adsorption process of Hg(II) on AL‐SH was mainly dependent on the pH and the optimal pH value was at pH ranging from 4.0 to 6.0. The adsorption process was found to follow pseudosecond‐order kinetics and the main process was chemical adsorption, which equilibrated at 8 h. The adsorption isotherm was better described by Langmuir and Temkin isotherm equations compared to Freundlich isotherm equation and the maximum adsorption capacity obtained was 101.2 mg g?1 (pH = 4.0, 20°C, initial Hg(II) concentration was 200 mg L?1). The thermodynamic parameters of and were positive while was negative, revealed that the adsorption of Hg(II) onto AL‐SH was a spontaneous and endothermic process with increased entropy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40749. 相似文献
15.
Synthesis and application of cotton‐based chelate fibers grafted with poly(1‐vinyl‐1,2,4‐triazole) side chains
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Cotton‐based chelate fibers grafted with poly(1‐vinyl‐1,2,4‐triazole) (PVTAZ) side chains were synthesized facilely by ozone‐induced graft polymerization of 1‐vinyl‐1,2,4‐triazole (VTAZ) monomer onto cotton fibers. The synthesis conditions were optimized to improve the yield and mechanical strength of the products. The obtained cotton‐g‐PVTAZ fibers were characterized and evaluated for batch adsorption of heavy metal ions from aqueous solutions. The maximum adsorption capacity of Ag(I), Pb(II), and Cu(II) on the fibers at pH 6.8 was 522, 330, and 184 mg/g, respectively. At 30% graft yield, the Young's modulus of cotton fiber increased about 26.5%, and its adsorption capacities of Ag(I), Pb(II), and Cu(II) increased about 2.6, 1.9, and 1.4 times, respectively. After washed with 0.1 mol/L HNO3 solutions, the adsorbed metal ions were eluted, and the regenerated cotton‐g‐PVTAZ fibers could be used repeatedly for water treatment. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41617. 相似文献
16.
Rongcheng Wu Jiuhui Qu 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2005,80(1):20-27
Magnetic ferrite material, MnFe2O4, as a novel adsorbent was prepared and characterized. Adsorption tests indicated that it is an excellent adsorbent for the removal of the azo dye Acid Red B (ARB) from water. After adsorbing ARB and recovery by the magnetic separation method, it can be regenerated by Fenton's reagent. The pseudo‐first‐order and second‐order kinetic models were used to describe the kinetic data and the rate constants were evaluated. The adsorption capacity was highly affected by the pH of the solution, and pH 3.8 was optimal. After regeneration, the adsorption capacity of MnFe2O4 increased significantly, which was the result of a decrease in average pore diameter, an increase in surface area of the adsorbent and the adsorption of ferric hydroxide produced in the regeneration reaction. The adsorption can be described with the Langmuir model and the maximum adsorption capacity for ARB was 53.8 mg g?1 adsorbent. FTIR study for ARB on MnFe2O4 indicated that the adsorption of ARB occurred via the azo group and the sulfonic group of the dye through the formation of a complex with the adsorbent surface. Copyright © 2004 Society of Chemical Industry 相似文献
17.
Fuchun Wang Junmei Zhao Huacong Zhou Wensong Li Na Sui Huizhou Liu 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2013,88(2):317-325
BACKGROUND: The recovery of neodymium from dilute solutions has become important because of its wide application in industry. This work reports the preparation of novel carboxymethyl chitosan adsorbents entrapped by silica (SiO2/CMCH) and their application for adsorption of neodymium(III) ions from aqueous solution. RESULTS: The effect of the CMCH content, equilibrium pH (pHe), contact time, initial concentrations of Nd(III) and temperature on the adsorption was investigated. The amount of Nd(III) adsorption increases with increasing pHe, which can be explained by the pH‐titration curve of CMCH. Temperature has a positive effect on Nd(III) adsorption, and the amount adsorbed is 53.04 mg g?1 dry adsorbent or 434.75 mg g?1 CMCH at 328 K. Adsorption kinetics and isotherm can be described by the pseudo‐second‐order model and Langmuir equation. Both complexation and ion exchange mechanisms are believed to play an important role in Nd(III) adsorption, and possible coordination between CMCH and Nd(III) is speculated. Complete desorption can be reached when the concentration of HCl is more than 0.1 mol L?1. CONCLUSION: A novel method was developed to prepare SiO2/CMCH adsorbents through a one‐step sol‐gel strategy. The prepared adsorbents were biocompatible and non‐toxic with a good adsorption ability for Nd(III), and could be used for adsorptive recovery of Nd(III) from aqueous solutions. © 2012 Society of Chemical Industry 相似文献
18.
《Ceramics International》2016,42(3):4228-4237
L-cysteine functionalized Fe3O4 magnetic nanoparticles (Cys–Fe3O4 MNPs) were continuously fabricated by a simple high-gravity reactive precipitation method combined with surface modification through a novel impinging stream-rotating packed bed with the assistance of sonication. The obtained Cys–Fe3O4 MNPs was characterized by XRD, TEM, FTIR, TGA and VSM, and further used for the removal of heavy metal ions from aqueous solution. The influence of pH values, contact time and initial metal concentration on the adsorption efficiency were investigated. The results revealed that the adsorption of Pb(II) and Cd(II) were pH dependent process, and the pH 6.0 was found to be optimum condition. Moreover, the adsorption kinetic for Cys–Fe3O4 MNPs followed the mechanism of the pseudo-second order kinetic model, and their equilibrium data were fitted with the Langmuir isothermal model well. The maximum adsorption capacities calculated from Langmuir equation were 183.5 and 64.35 mg g−1 for Pb(II) and Cd(II) at pH 6.0, respectively. Furthermore, the adsorption and regeneration experiment showed there was about 10% loss in the adsorption capacity of the as-prepared Cys–Fe3O4 MNPs for heavy metal ions after 5 times reuse. All the above results provided a potential method for continuously preparing recyclable adsorbent applied in removing toxic metal ions from wastewater through the technology of process intensification. 相似文献
19.
Haijia Su Zhixing Wang Tianwei Tan 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》2005,80(4):439-444
A new chitosan molecular‐imprinted adsorbent was prepared from the mycelium of waste biomass. The results showed that an adsorbent using Penicillium chrysogenum mycelium as the core material was better than one derived from peanut coat. The adsorption capacity of the surface‐imprinted adsorbent for Ni2+ was enhanced by increasing the chitosan concentration in the imprinting process. Epichlorohydrin was better than glutaraldehyde as a cross‐linking agent; the optimal imprinted Ni2+ concentration for preparing the surface‐imprinted adsorbent was 2 mg (Ni2+) g?1 of mycelium. The adsorption capacity of the surface‐imprinted adsorbent was 42 mg g?1 (at 200 mg dm?3 initial metal ions concentration) and twice that of the mycelium adsorbent. The surface‐imprinted adsorbent can be reused for up to 15 cycles without loss of adsorption capacity. Copyright © 2005 Society of Chemical Industry 相似文献
20.
Poly(benzoxazine‐co‐sulfur): An efficient sorbent for mercury removal from aqueous solution
下载免费PDF全文
![点击此处可从《应用聚合物科学杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Sema Akay Berkant Kayan Dimitrios Kalderis Mustafa Arslan Yusuf Yagci Baris Kiskan 《应用聚合物科学杂志》2017,134(38)
A novel sulfur‐rich adsorbent, poly(BA‐ala‐co ‐sulfur), was synthesized by reacting allyl functional benzoxazine (BA‐ala) and elemental sulfur. Simultaneous inverse vulcanization and ring‐opening reactions of benzoxazine generated copolymers in several feed ratios. The adsorption behavior of these copolymers was investigated in aqueous solutions containing Hg2+. A three level Box–Behnken design with four factors was applied in order to examine the interactive effect of Hg2+ concentration (ppm), S % in adsorbent, temperature, and pH. The optimum adsorption conditions were determined as: 10.33 ppm Hg2+, 68% S content, 329 K, and pH 6.3. Common isotherm and kinetic models were applied to the experimental data, where the Langmuir isotherm provided the better fit (q max = 79.36 mg g?1) and the pseudo‐second order fit indicated chemisorption as the process‐controlling step. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45306. 相似文献