Software Radio——Software Radio： A Review of Design Considerations and Digital Hardware Choices

This paper reviews the requirements for Software Defined Radio （SDR） systems for high-speed wireless applications and compares how well the different technology choices available- from ASICs, FPGAs to digital signal processors （DSPs） and general purpose processors （GPPs） - meet them.     

EEFA： Energy Efficiency Frame Aggregation Scheduling Algorithm for IEEE 802.11n Wireless Network

Packet size is restricted due to the error-prone wireless channel which drops the network energy utilization. Furthermore, the frequent packet retransmissions also lead to energy waste. In order to improve the energy efficiency of wireless networks and save the energy of wireless devices, EEFA （Energy Efficiency Frame Aggregation）, a frame aggregation based energy-efficient scheduling algorithm for IEEE 802.11n wireless network, is proposed. EEFA changes the size of aggregated frame dynamically according to the frame error rate, so as to ensure the data transmission and retransmissions completed during the TXOP and reduce energy consumption of channel contention. NS2 simulation results show that EEFA algorithm achieves better performance than the original frame-aggregation algorithm.     

基于代数签名且支持数据动态更新的云数据完整性验证方案(英文)

Cloud storage is one of the main application of the cloud computing. With the data services in the cloud, users is able to outsource their data to the cloud, access and share their outsourced data from the cloud server anywhere and anytime. However, this new paradigm of data outsourcing services also introduces new security challenges, among which is how to ensure the integrity of the outsourced data. Although the cloud storage providers commit a reliable and secure environment to users, the integrity of data can still be damaged owing to the carelessness of humans and failures of hardwares/softwares or the attacks from external adversaries. Therefore, it is of great importance for users to audit the integrity of their data outsourced to the cloud. In this paper, we first design an auditing framework for cloud storage and proposed an algebraic signature based remote data possession checking protocol, which allows a third-party to auditing the integrity of the outsourced data on behalf of the users and supports unlimited number of verifications. Then we extends our auditing protocol to support data dynamic operations, including data update, data insertion and data deletion. The analysis and experiment results demonstrate that our proposed schemes are secure and efficient.     

SDN-Based Data Offioading for 5G Mobile Networks

The rapid growth of 3G/4G enabled devices such as smartphones and tablets in large numbers has created increased demand formobile data services.Wi-Fi offloading helps satisfy the requirements of data-rich applications and terminals with improved multi-media.Wi-Fi is an essential approach to alleviating mobile data traffic load on a cellular network because it provides extra capaci-ty and improves overall performance.In this paper,we propose an integrated LTE/Wi-Fi architecture with software-defined net-working(SDN)abstraction in mobile backhaul and enhanced components that facilitate the move towards next-generation 5G mo-bile networks.Our proposed architecture enables programmable offloading policies that take into account real-time network condi-tions as well as the status of devices and applications.This mechanism improves overall network performance by deriving real-time policies and steering traffic between cellular and Wi-Fi networks more efficiently.     

基于纳米多晶硅薄膜晶体管分裂漏MAGFET制作和特性

A split-drain magnetic field-effect transistor （MAGFET） based on a nano-polysilicon thin film transistor （TFT） is proposed, which contains one source, two drains and one gate. The sensor chips were fabricated on （100） high resistivity silicon substrate by CMOS technology. When drain-source voltage equals 5.0 V and length and width ratio of the TFT channel is 80 μm/160 μm, the current and voltage magnetic sensitivities of the split-drain MAGFET based on the TFT are 0.018 mA/T and 55 mV/T, respectively. Through adopting nano-polysilicon thin films and nano-polysilicon thin films/high resistivity silicon heterojunction interfaces as the magnetic sensing layers, it is possible to realize detection of the external magnetic field. The test results show that magnetic sensitivity of the split-drain MAGFET can be improved significantly.     

A Trusted Measurement Scheme Suitable for the Clients in the Trusted Network

The trusted network connection is a hot spot in trusted computing field and the trust measurement and access control technology are used to deal with network security threats in trusted network. But the trusted network connection lacks fine-grained states and real-time measurement support for the client and the authentication mechanism is difficult to apply in the trusted network connection, it is easy to cause the loss of identity privacy. In order to solve the above- described problems, this paper presents a trust measurement scheme suitable for clients in the trusted network, the scheme integrates the following attributes such as authentication mechanism, state measurement, and real-time state measurement and so on, and based on the authentication mechanism and the initial state measurement, the scheme uses the real- time state measurement as the core method to complete the trust measurement for the client. This scheme presented in this paper supports both static and dynamic measurements. Overall, the characteristics of this scheme such as fine granularity, dynamic, real-time state measurement make it possible to make more fine-grained security policy and therefore it overcomes inadequacies existing in the current trusted network connection.     

On the Secrecy Rate of Limited Feedback Beamforming over Multiple-Input Single-Output Wiretap Channels

The secrecy rate of limited feedback beamforming is studied for a Multiple-Input Single-Output （MISO） wiretap channel with a multi-antenna eavesdropper. We first obtain the secrecy rate of limited feedback beamforming achieved at the legitimate receiver. We then derive a lower bound for the asymptotic secrecy rate in the large system limit, From this bound, we observe a threshold for the ratio of eavesdrop antennas to transmit antennas to obtain a positive secrecy rate. We further show that the secrecy rate loss due to limited feedback decays with the number of feedback bits per transmit antenna.     

应力和电阻率可控的适用于高品质因子MEMS器件的原位掺硼LPCVD多晶硅薄膜

The simultaneous control of residual stress and resistivity of polysilicon thin films by adjusting the deposition parameters and annealing conditions is studied. In situ boron doped polysilicon thin films deposited at 520 ℃ by low pressure chemical vapor deposition （LPCVD） are amorphous with relatively large compressive residual stress and high resistivity. Annealing the amorphous films in a temperature range of 600-800 ℃ gives polysilicon films nearly zero-stress and relatively low resistivity. The low residual stress and low resistivity make the polysilicon films attractive for potential applications in micro-electro-mechanical-systems （MEMS） devices, especially in high resonance frequency （high-f） and high quality factor （high-Q） MEMS resonators. In addition, polysilicon thin films deposited at 570 ℃ and those without the post annealing process have low resistivities of 2-5 mΩ·cm. These reported approaches avoid the high temperature annealing process （〉 1000 ℃）, and the promising properties of these films make them suitable for high-Q and high-f MEMS devices.     

一种基于标准CMOS工艺的光互连方案探讨

A standard CMOS optical interconnect is proposed, including an octagonal-annular emitter, a field oxide, metal 1-PSG/BPSG-metal 2 dual waveguide, and an ultra high-sensitivity optical receiver integrated with a fingered P＋/N-well/P-sub dual photodiode detector. The optical interconnect is implemented in a Chartered 3.3-V 0.35-μm standard analog CMOS process with two schemes for the research of the substrate noise coupling effect on the optical interconnect performance： with or without a GND-guardring around the emitter. The experiment results show that the optical interconnect can work at 100 kHz, and it is feasible to implement optical interconnects in standard CMOS processes.     

用于高压ESD保护的LDMOS中触发电压退化效应的研究

The trigger voltage walkin effect has been investigated by designing two different laterally diffused metal-oxide-semiconductor （LDMOS） transistors with an embedded silicon controlled rectifier （SCR）. By inserting a P＋ implant region along the outer and the inner boundary of the N＋ region at the drain side of a conventional LDMOS transistor, we fabricate the LDMOS-SCR and the SCR-LDMOS devices with a different triggering order in a 0.5/zm bipolar-CMOS-DMOS process, respectively. First, we perform transmission line pulse （TLP） and DC-voltage degradation tests on the LDMOS-SCR. Results show that the trigger voltage walk-in effect can be attributed to the gate oxide trap generation and charge trapping. Then, we perform TLP tests on the SCR-LDMOS. Results indicate that the trigger voltage walk-in effect is remarkably reduced. In the SCR-LDMOS, the embedded SCR is triggered earlier than the LDMOS, and the ESD current is mainly discharged by the parasitic SCR structure. The electric potential between the drain and the gate decreases significantly after snapback, leading to decreased impact ionization rates and thus reduced trap generation and charge trapping. Finally, the above explanation of the different trigger voltage walk-in behavior in LDMOS-SCR and SCR-LDMOS devices is confirmed by TCAD simulation.     

A low power 3-5 GHz CMOS UWB receiver front-end

A novel low power RF receiver front-end for 3-5 GHz UWB is presented. Designed in the 0.13μm CMOS process, the direct conversion receiver features a wideband balun-coupled noise cancelling transconductance input stage, followed by quadrature passive mixers and transimpedance loading amplifiers. Measurement results show that the receiver achieves an input return loss below -8.5 dB across the 3.1-4.7 GHz frequency range, maximum voltage conversion gain of 27 dB, minimum noise figure of 4 dB, IIP3 of -11.5 dBm, and IIP2 of 33 dBm. Working under 1.2 V supply voltage, the receiver consumes total current of 18 mA including 10 mA by on-chip quadrature LO signal generation and buffer circuits. The chip area with pads is 1.1 × 1.5 mm^2.     

适用于双金属栅集成的TaN湿法腐蚀

Wet-etch etchants and the TaN film method for dual-metal-gate integration are investigated. Both HF/HN O3/H2O and NH4OH/H2O2 solutions can etch TaN effectively, but poor selectivity to the gate dielectric for the HF/HNO3/H2O solution due to HF being included in HF/HNO3/H2O, and the fact that TaN is difficult to etch in the NH4OH/H2O2 solution at the first stage due to the thin TaOxNy layer on the TaN surface, mean that they are difficult to individually apply to dual-metal-gate integration. A two-step wet etching strategy using the HF/HNO3/H2O solution first and the NH4OH/H2O2 solution later can fully remove thin TaN film with a photo-resist mask and has high selectivity to the HfSiON dielectric film underneath. High-k dielectric film surfaces are smooth after wet etching of the TaN metal gate and MOSCAPs show well-behaved C-V and Jg-Vg characteristics, which all prove that the wet etching of TaN has little impact on electrical performance and can be applied to dual-metal-gate integration technology for removing the first TaN metal gate in the PMOS region.     

基于非线性DAC的高速直接数字频率合成器

This paper presents a high speed ROM-less direct digital frequency synthesizer （DDFS） which has a phase resolution of 32 bits and a magnitude resolution of 10 bits. A 10-bit nonlinear segmented DAC is used in place of the ROM look-up table for phase-to-sine amplitude conversion and the linear DAC in a conventional DDFS. The design procedure for implementing the nonlinear DAC is presented. To ensure high speed, current mode logic （CML） is used. The chip is implemented in Chartered 0.35μm COMS technology with active area of 2.0 × 2.5 mm^2 and total power consumption of 400 mW at a single 3.3 V supply voltage. The maximum operating frequency is 850 MHz at room temperature and 1.0 GHz at 0℃.     

一种应用于频率综合器的全差分电荷泵的设计与噪声分析

A fully-differential charge pump（FDCP）with perfect current matching and low output current noise is realized for phase-locked loops（PLLs）.An easily stable common-mode feedback（CMFB）circuit which can handle high input voltage swing is proposed.Current mismatch and current noise contribution from the CMFB circuit is minimized.In order to optimize PLL phase noise,the output current noise of the FDCP is analyzed in detail and calculated with the sampling principle.The calculation result agrees well with the simulation.Based on the noise analysis,many methods to lower output current noise of the FDCP are discussed.The fully-differential charge pump is integrated into a 1–2 GHz frequency synthesizer and fabricated in an SMIC CMOS 0.18μm process.The measured output reference spur is–64 dBc to–69 dBc.The in-band and out-band phase noise is–95 dBc/Hz at 3 kHz frequency offset and–123 dBc/Hz at 1 MHz frequency offset respectively.     

Software-Defined Cellular Mobile Network Solutions

The emergency relating to software-defined networking(SDN),especially in terms of the prototype associated with OpenFlow,pro-vides new possibilities for innovating on network design.Researchers have started to extend SDN to cellular networks.Such newprogrammable architecture is beneficial to the evolution of mobile networks and allows operators to provide better services.Thetypical cellular network comprises radio access network(RAN)and core network(CN);hence,the technique roadmap diverges intwo ways.In this paper,we investigate SoftRAN,the latest SDN solution for RAN,and SoftCell and MobileFlow,the latest solu-tions for CN.We also define a series of control functions for CROWD.Unlike in the other literature,we emphasize only software-defined cellular network solutions and specifications in order to provide possible research directions.     

掉电后SRAM防数据残留物理攻击的安全策略

This paper presents a security strategy for resisting a physical attack utilizing data remanence in powered- off static random access memory （SRAM）. Based on the mechanism of physical attack to data remanence, the strategy intends to erase data remanence in memory cells once the power supply is removed, which disturbs attackers trying to steal the right information. Novel on-chip secure circuits including secure power supply and erase transistor are integrated into conventional SRAM to realize erase operation. Implemented in 0.25μm Huahong-NEC CMOS technology, an SRAM exploiting the proposed security strategy shows the erase operation is accomplished within 0.2 μs and data remanence is successfully eliminated. Compared with conventional SRAM, the retentive time of data remanence is reduced by 82% while the operation power consumption only increases by 7%.     

Distributed Power Control for Energy Conservation in Hybrid Cellular Network with Device-to-Device Communication

Device-to-Device （D2D） com- munication has been proposed as a promising implementation of green communication to benefit the existed cellular network. In order to limit cross-tier interference while explore the gain of short-range communication, we devise a series of distributed power control （DPC） schemes for energy conservation （EC） and enhancement of radio resource utilization in the hybrid system. Firstly, a constrained opportunistic power control model is built up to take advantage of the interference avoidance methodology in the presence of service requirement and power constraint. Then, biasing scheme and admission control are added to evade ineffective power consumption and maintain the feasibility of the system. Upon feasibility, a non-cooperative game is further formulated to exploit the profit in EC with minor influence on spectral efficiency （SE）. The convergence of the DPC schemes is validated and their performance is confirmed via simulation results.     

纳米硅/单晶硅异质结MAGFET制作及特性

A MAGFET using an nc-Si/c-Si heterojunction as source and drain was fabricated by CMOS technology, using two ohm-contact electrodes as Hall outputs on double sides of the channel situated 0.7L from the source. The experimental results show that when VDS = -7.0 V, the magnetic sensitivity of the single nc-Si/c-Si heterojunction magnetic metal oxide semiconductor field effect transistor （MAGFET） with an L ： W ratio of 2 ： 1 is 21.26 mV/T, and that with an L ： W ratio of 4 ： 1 is 13.88 mV/T. When the outputs of double nc-Si/c-Si heterojunction MAGFETs with an L ： W ratio of 4 ： 1 are in series, their magnetic sensitivity is 22.74 mV/T, which is an improvement of about 64% compared with that of a single nc-Si/c-Si heterojunction MAGFET.     

集成片上天线的低成本低功耗超高频射频识别标签

This paper presents an EPC Class 1 Generation 2 compatible tag with on-chip antenna implemented in the SMIC 0.18 μm standard CMOS process.The UHF tag chip includes an RF/analog front-end, a digital baseband, and a 640-bit EEPROM memory.The on-chip antenna is optimized based on a novel parasitic-aware model.The rectifier is optimized to achieve a power conversion efficiency up to 40% by applying a self-bias feedback and threshold compensation techniques.A good match between the tag circuits and the on-chip antenna is realized by adjusting the rectifier input impedance.Measurements show that the presented tag can achieve a communication range of 1 cm with 1 W reader output power using a 1 × 1 cm2 single-turn loop reader antenna.     

Survivable Virtual Network Mapping Using Optimal Backup Topology in Virtualized SDN

Software-Defined Network architecture offers network virtualization through a hypervisor plane to share the same physical substrate among multiple virtual networks. However, for this hypervisor plane, how to map a virtual network to the physical substrate while guaranteeing the survivability in the event of failures, is extremely important. In this paper, we present an efficient virtual network mapping approach using optimal backup topology to survive a single link failure with less resource consumption. Firstly, according to whether the path splitting is supported by virtual networks, we propose the OBT-I and OBT-II algorithms respectively to generate an optimal backup topology which minimizes the total amount of bandwidth constraints. Secondly, we propose a Virtual Network Mapping algorithm with coordinated Primary and Backup Topology （VNM-PBT） to make the best of the substrate network resource. The simulation experiments show that our proposed approach can reduce the average resource consumption and execution time cost, while improving the request acceptance ratio of VNs.