共查询到20条相似文献,搜索用时 765 毫秒
1.
混凝土坝浇筑计算机仿真是施工管理的重要依据之一。然而由于以往所建立的仿真模型多是基于工艺因素,缺乏对管理因素的考虑(像承包商的经济目标等),使得仿真系统很难准确地模拟真实的环境。基于多Agent系统的混凝土坝浇筑计算机仿真模型可以考虑工艺和组织管理两个方面的因素,使建立的模型更具实用性并提高描述问题的深度和广度。该文在对现有模型应用中存在问题分析基础上,提出了一种混凝土浇筑多Agent系统建模的构架,它把混凝土浇筑过程看作协商过程,使得施工管理人员可以得到更多的信息并进行交互。这一框架使得混凝土浇筑施工仿真模型更加具有智能性和价值性。 相似文献
2.
陈英 《CAD/CAM与制造业信息化》2002,(10):57-58,60
本文介绍了采用Pro/ENGINEER进行塑成形工艺设计和模具设计的实例。在CAD模型的基础上,利用MAFAP软件进行CAE分析,预测成形过程中的材料流动,应力应变分布及温度变化,为工艺设计和模具设计提供指导。 相似文献
3.
王靖 《数字社区&智能家居》2015,(1):157-158,192
随着我国加入世界贸易组织,经济水平迅速发展,规范化、系统化、科学化的施工管理过程也开始成为了施工企业关注的一个重要方面。怎样将施工过程中牵扯的诸多因素等这些信息进行统一管理,成为了施工企业施工管理的难点和重点。计算机信息技术的应用,能够迅速、准确、完整的信息进行合理的规范管理。计算机信息技术的应用,成为了当前施工管理过程的发展方向。该文论述了计算机在施工管理中的应用的优越性,对计算机在现代施工管理应用中的现状问题进行了分析,提出了关于计算机在施工管理过程中应用的几种方法。 相似文献
4.
5.
6.
马智亮 《计算机应用与软件》1998,15(1):42-48
本文应用面向对象技术分析建筑施工组织设计,建立了包括施工项目子模型和施工活动子模型的施工领域模型,并在此基础上建立了施工方案智能决策支持系统模型。同时以钢筋砼建筑的施工方案决策为例,提出了知识库中知识的面向对象表示与增长机制以及决策过程的实现方法。 相似文献
7.
对大体积混凝土浇灌过程中的温度和温度应力进行监测与控制,可以有效防止裂缝的产生。在分析了大体积混凝土温度和应力常见监测方法的特点后,提出一种基于无线传感网络和移动agent技术的分布式温度和应力监控系统。系统利用无线传感器节点采集混凝土温度和应力等信号,实现并行的分布式信息采集与处理,安装布置简便;将移动agent应用于无线传感网络以解决异构系统间协作、协调及信息融合,有效降低了冗余数据的传输及节点能耗。详细分析了系统结构组成及设计方法,并利用该系统进行了现场测试,实验结果表明,该系统能够较好实现对混凝土施工过程中的温度、应变情况进行实时在线监测。 相似文献
8.
9.
为定量分析煤岩受载过程中红外辐射温度特征参数与煤岩损伤演化规律,采集并分析了煤岩单轴压缩条件下的红外辐射温度数据,根据损伤力学理论构建了煤岩损伤模型,得到了最高红外辐射温度积累量和煤岩损伤之间的关系。结果表明:(1)煤岩受载最高红外辐射温度-时间曲线与载荷-时间曲线有很好的对应关系,最高红外辐射温度能够反映煤岩受载破坏情况;(2)基于最高红外辐射温度积累量的煤岩损伤演化模型能够很好地反映煤岩在单轴压缩条件下裂隙缺陷产生、发展和破坏的演化过程;(3)基于最高红外辐射温度积累量的计算应力和实测应力的整体相关性系数达到0.8以上,呈高度相关,且计算应力-应变曲线峰值超前于实测应力-应变曲线峰值。 相似文献
10.
大型结构工程软件包TCA是我国七五攻关项目,特别适用于大体积混凝土结构工程,在施工过程中可变计算域的温度、应力分析的仿真计算。本文简要地介绍了TCA软件应用有限单元法解决弹性徐变体计算的初应变法和软件的基本特点与结构,并给出了应用实例。 相似文献
11.
《Advances in Engineering Software》2001,32(9):677-682
The 3-D finite element relocating mesh method is developed for simulation analysis of temperature and thermal stress distribution in a roller compacted concrete dam during the construction period. According to the relation between specific properties and age of concrete, some meshes are merged into a larger mesh or a few larger meshes when the age of the concrete is appropriate. Using this method, the total number of elements and nodes were remarkably reduced when the dam height was increased. When the change in elastic modulus, creeps and hydration heat is within the limits permitted by design criteria, the relocating of mesh will start. Using this method, a 3 D simulation analysis of thermal stress in a roller compacted concrete (RCC) high dam can be realized by microcomputer and appeared at the construction site. On the basis of real factors during the construction period, an engineer can predict the distribution of temperature and thermal stress in the RCC dam. Therefore, engineers can take appropriate measures to control the concrete temperature to reduce the thermal stress and avoid crack development within the dam. 相似文献
12.
为探究火灾下超高性能混凝土(ultra high performance concrete,UHPC)梁斜截面承载性能的退化与损伤演化规律,采用Abaqus建立16个UHPC梁的热-力耦合分析模型,选择剪跨比、载荷水平、配箍率、箍筋配置方式、纵筋配筋率等作为考察参数,通过与试验结果对比验证模型的正确性.火灾下UHPC梁斜截面承载性能削减严重,其破坏延性优于普通混凝土梁.载荷水平和箍筋配置方式是影响UHPC梁耐火极限的主要因素:随着载荷水平增大,耐火极限降低;配置箍筋可以提高试验梁在火灾下的延性,但降低其耐火极限. 相似文献
13.
14.
介绍了红外热成像技术的发展、组成及工作原理,分析了红外热成像技术的优缺点,以怀柔水库热成像仪的应用为例论述了热成像仪建设的必要性、系统结构、系统功能、系统特点及应用效果。随着各行各业对安保工作要求的日益提高,民用领域对红外热成像仪的应用需求将日渐增强。未来,红外热像仪将逐渐向小型化、低成本、智能化方向发展,其在各个领域智能视频监控中将具有很高的发展潜力。 相似文献
15.
16.
基于Abaqus的催化器总成热循环应力分析 总被引:1,自引:0,他引:1
基于Abaqus的稳态热分析和热力耦合分析功能,在给定热边界条件下计算某催化器总成稳态热分布;利用Abaqus的顺序耦合功能计算催化器总成在循环温度下的热应力,得到关键部件处的热应力和塑性应变.根据结果初步评价该催化器总成在热循环冲击载荷下的强度特性,为热冲击试验和结构优化提供参考. 相似文献
17.
针对石油稠油热采的蒸汽发生器的蒸汽干度被控对象具有大延迟、严重非线性以及干扰因素多等特点,设计了微机监控系统。硬件采用模块化结构,组态灵活,可靠性高,操作方便。针对不同的工艺阶段和控制环节提出了相应的控制策略。应用结果表明,系统在多种工况下满足生产要求,具有推广价值。 相似文献
18.
Finite element stress analysis of a reinforced high-strength concrete column in severe fires 总被引:2,自引:0,他引:2
The objective of this study is to quantify the development of thermal stress states that account for the occurrence of moisture-induced explosive spalling of reinforced high-strength concrete structures under rapid heating conditions. Obtained from finite difference models of simulating coupled heat and mass transport phenomena in heated reinforced concrete elements, transient temperature profiles are used as prescribed boundary conditions for subsequent finite element thermo-elastic stress analysis. A computational methodology using the theory of mixtures (volume averaging) is presented to compute thermally induced effective stresses that are potentially associated with thermal spalling of high-strength concrete. 相似文献
19.
Development of finite element computer code for thermal analysis of roller compacted concrete dams 总被引:1,自引:0,他引:1
M.S. Jaafar K.H. Bayagoob J. Noorzaei Waleed A.M. Thanoon 《Advances in Engineering Software》2007,38(11-12):886
Thermal analysis of roller compacted concrete (RCC) dams plays an important role in their design and construction. This paper deals with the development of a finite element based computer code for the determination of temperatures within the dam body. The finite element code is then applied to the real full-scale problem to determine the impact of the placement schedule on the thermal response of roller compacted concrete dam. Based on the results obtained, it could be concluded that for a given roller compacted concrete dam, changing the placing schedule can optimize the locations of maximum temperature zones. 相似文献
20.
高权 《自动化与仪器仪表》2012,(4):185-185,189
分析了火电机组热控专业在设计、基建和调试过程可能出现的各种实际问题,包括D C S系统、控制逻辑、电源系统和就地设备等方面,并提出了解决问题的方法。 相似文献