共查询到20条相似文献,搜索用时 31 毫秒
1.
通过梳理宝钢湛江钢铁炼钢区域金属平衡物流,理顺金属物流关系。根据质量守恒原理,建立炼钢区域金属平衡盈亏报表,实现炼钢区域金属平衡管理,并对金属盈亏情况进行分析。金属平衡盈亏报表反映金属资源在生产过程中的利用程度、金属流向及金属损失情况,对编制生产计划、改进工艺技术及操作、预算生产成本起到指导作用。通过金属平衡盈亏报表,能够及时发现生产管理中存在的薄弱点,从而进一步优化工艺,明确改进的方向和幅度,有效提高厂内金属资源回收利用率,实现公司效益最大化。 相似文献
2.
3.
露天金属矿山开采是露天矿山安全管理工作中最为主要的一部分,露天金属矿山安全管理的有效实施将会对露天金属矿山开采作出最为稳妥的安全保障,露天金属矿山开采的管理问题一直是露天金属矿山安全管理部门最为注重的问题,一些露天金属矿山安全开采情况较为复杂的区域想要零风险的进行露天金属矿山开采显然是十分困难的,但是露天金属矿山安全管理工作正是积极面对这种困难的最为直接的手段。露天金属矿山安全管理工作在于加强其安全管理人员的综合能力。面对责任重大的露天金属矿山安全管理工作,不具备露天金属矿山安全管理的基本专业能力是不行的,这也是露天金属矿山安全管理在选择任职人员时关键的一点。 相似文献
4.
采用氟化锂-氟化钇二元萃取剂熔盐萃取金属钇,既有效降低金属钇中的氧和钙含量,又减少了氟根含量,制备的金属钇纯度达99.35%(质量分数),有效地提高了金属钇的纯度,为工业化生产提纯金属钇开辟了新途径。 相似文献
5.
Liang Hao Yun Lu Hiromasa Sato Hiroshi Asanuma Jie Guo 《Metallurgical and Materials Transactions A》2013,44(6):2717-2724
Powders of Cu, Ti, Ni, Fe, and Zn metals were used to prepare coatings on the surfaces of Al2O3 balls by the mechanical coating technique. The coated Al2O3 balls were characterized with XRD and SEM. The results showed that all the metal powders except Ni formed continuous metal coatings. The evolution of metal coatings during mechanical coating was also investigated. The analysis indicates that as long as continuous metal coatings can be formed, the evolution can fall into the following stages: nucleation, formation and coalescence of discrete islands, formation and thickening of continuous coatings, and exfoliation of continuous coatings. Electronegativity of the metal was shown to have a major effect on the adhesion of the tiny metal particles on the surfaces of the Al2O3 balls during the initial stage of mechanical coating. The lower the electronegativity of the metal, the greater the coverage of the metal on the Al2O3 ball and the easier the adhesion of the tiny metal particles. Further, the better the plastic deformability of metal, the easier the cold welding among metal powder particles and the greater the thickness of the continuous metal coatings. 相似文献
6.
目的:研究塑性异化比值与金属板冲压加工性能之间的关系。方法:选取某金属板作为实验试样,分别在温度为350℃、400℃、430℃和450℃以及应变速率为10^-4/s、10^-3/s、10^-2/s的条件下,改变金属板试样的塑性异化比值,并计算试样冲压应变大小,比较塑性异化比值与冲压应变之间的关系。结果:当金属板塑性异化比值超出一定范围时,试样冲压应变为零,金属板出现断裂。结论:在对金属板生产加工过程中,应保证金属板的塑性异化比值控制在适当范围内,并采用爆炸焊接方法制备金属板,从而避免金属板断裂,保证金属板生产加工的质量。 相似文献
7.
本文主要通过金属材料技术监督的定义,引出金属材料技术监督的方法,如:金属机械性能检测、金属元素分析、金属无损检测,以及金相分析等,从中找出发电厂金属材料工作中常见的漏洞和问题,并深入探讨金属材料技术监督的实质性内容,进一步提出实际应用措施与方案,以期为发电厂工作人员提供可操作性参考,同时有效保障技术监督的效果。 相似文献
8.
9.
分形理论在金属断裂方面应用的进展 总被引:5,自引:0,他引:5
综述和分析了近年来分形理论在金属断裂方面应用的进展情况,包括金属断口的分形性及其分维测定方法,金属断裂的多种分形模型和断口分维与材料性能之间的关系及其物理意义。为分形理论在其他领域的应用提供了宝贵的经验。 相似文献
10.
11.
12.
I. Yu. Zinurov A. M. Shumakov S. G. Ovchinnikov S. N. Pigin Yu. F. Mamenko 《Steel in Translation》2009,39(7):576-578
The advantages and disadvantages of hot metal in the electrosmelting of steel are considered. It is energetically expedient
to replace some of the metal scrap with hot metal. Methods of introducing hot metal in the arc furnace are analyzed. Practical
recommendations are made regarding the use of hot metal in electrosmelting. The hot metal used in electrosmelting at six metallurgical
plants is subjected to chemical analysis. 相似文献
13.
传统金属加工设备存在持续运行连贯性较差的缺陷,以此开展了基于机械制图一体化技术的金属加工设备运行设计。引入积木式机体安装方法,设计金属加工设备运行机体,设计设备加工金属过程,控制金属加工设备电气运行方式,设计设备固焊流程。提出对比实验,验证提出设备可提升金属加工设备运行的连贯性,更具备市场经济效益。 相似文献
14.
LI Dong- sheng LIU Ying DI Zhan- xia CHUN Tie- jun LONG Hong- ming WANG Ping 《钢铁研究学报》2018,30(2):97-103
The circumferential flow of hot metal has a significant influence on the hearth erosion. Because the situation of the hearth is ??black box??, there is no direct examine method for the hot metal flow. Based on the computational fluid dynamics, the streamline and velocity were studied with different deadman conditions and different tapholes. The results show that when the hot metal tap with single or double tapholes (with the angle of 40??) and the deadman is at the sitting condition whose center is fine coke, the circulating hot metal is the most serious in the hearth. When the hot metal tap with double tapholes(with the obtuse angle), the circumferential flow of hot metal is weakened. The sitting deadman could strengthen the hot metal circulution. However, the floating deadman could weaken hot metal circulution, but it strengthens the hot metal flow of the bottom. 相似文献
15.
16.
纤维素衍生物的吸附性主要是通过对金属离子选择性吸收而体现出来的,文中针对纤维素及其衍生物能够吸附不同的金属离子的性能,综述了近十几年来纤维素及其衍生物对黑色金属离子,轻金属离子和重金属离子的吸附状况和应用情况,简单总结了纤维素衍生物金属离子吸附剂的再生利用,展望了纤维素衍生物金属离子吸附剂在其他方面应用的良好前景. 相似文献
17.
18.
通过对金属钕产品进行金相分析和硬度测试后发现,在氟盐体系电解法生产金属钕的过程中,碳含量是金属钕产品的一个重要质量指标,也是影响金属钕的组织结构和性能的主要因素。 相似文献
19.
加快再生有色金属行业的产业升级 总被引:1,自引:0,他引:1
介绍我国再生有色金属行业的发展现状,指出目前再生有色金属发展所面临的新挑战,着重分析废金属拆解工艺和有色金属再生熔炼的特点以及亟待解决的问题,提出加快再生有色金属行业产业升级的途径。 相似文献