共查询到20条相似文献,搜索用时 109 毫秒
1.
真空灭弧室用磁控真空计的研究 总被引:1,自引:0,他引:1
本文介绍了同轴场式脉冲磁控真空计测量的原理以及设计中的有关问题。给出了某型号的真空灭弧室的压强-离子电流曲线。测量结果表明,该磁控计的压强-离子电流曲线为幂指数函数,磁控放电的离子流与磁场强度无关,但磁场强度必须足以产生稳定的磁控放电。压强-离子电流曲线与灭弧室电极的几何构造和触头的状况有关。 相似文献
2.
3.
4.
皮氏计改修及其测量电路李银祥,邓志刚(武汉工业大学,武汉430070)日立公司H-600型电镜上用的皮喇尼真空计为WP-02型。该皮氏计由于规丝非常细,在使用中容易损坏,我们将已损坏的皮氏计改用粗丝做规丝,粗丝皮氏计经使用效果很好,现将其测量线路和规... 相似文献
5.
6.
研制了一种新的振膜真空计。量程覆盖10^-3Pa-1atm。该计采取用通电线圈的电磁力驱动振膜,振膜再带动另一个线圈,使其切割磁力线,从而感应出一个与压强有关的信号电压。振膜的振幅受气体分子的阻尼,压强越高,阻尼越强,振幅变小,感应信号也就越小。这种新型振膜规,比现今的静电力驱动振膜规工艺简单,参数一致性好,利于生产和降低成本。电磁力驱动振膜规可采用单膜,也可采有双膜结构,双膜规消除了现今振膜规在 相似文献
7.
8.
9.
光谱反射率智能化测量系统的研究 总被引:2,自引:0,他引:2
本文阐述了光谱反射率智能化测量系统的设计方法及工作原理,给出了测量系统响应特性的数学表达式,讨论了自动量程转换、自动零点调整和自动非线性校准等技术难题。 相似文献
10.
DarleneCarpenter 《电子产品世界》2004,(11B):66-69,73
人们期望一个自动测量系统既能完成准确测量,又能从待测器件(DUT)上收集到各种数据。在大多数情况下,自动测量必须在保证测量精度的前提下,在尽可能短的时间内完成整个测试,从而最大限度减少产品成本和资本投入。本文将讨论最大限度减少自动测量时间、同时保证其测量准确度的一些技术手段。 相似文献
11.
介绍了UHVCVD SiGe外延设备真空腔室及自动传输系统的具体设计,通过合理选取预备室和反应室的真空泵组,满足了设备的超高真空要求,自动传输系统则保证了反应室高洁净环境、提高外延生产效率。 相似文献
12.
13.
本文研究了以可编程序控制器为核心的真空浸渍设备自动控制系统,较为详细地分析了电力电容器真空浸渍工艺过程的综合特性,设计成功了一种与可编程序控制器配套使用的输入、输出数字信号接口电路及信号切换电路,并完成了具有特色的模块化软件设计工作。试验表明,本系统工作可靠,性能良好,操作方便,与传统的控制方法相比,具有很大的优越性。 相似文献
14.
15.
16.
17.
18.
In this paper, an automatic method was developed to characterise whisker growth quantitatively in SEM images. The key step of the automatic methods in this case is the determination of the optimal threshold value for image segmentation, i.e. separation of the objects (whiskers) from the background (substrate). A thresholding method was developed for this purpose and was compared to manual and to general purpose automatic methods as references. As it was proven in previous studies the vacuum deposited tin layers on copper substrates can produce numerous tin whiskers in various shapes and lengths in a short time. This layer deposition technology was therefore chosen for the comparison of the thresholding methods. Images of the produced whiskers were captured by a FEI Inspect S50 Scanning Electron Microscope. By executing the automatic methods in the captured images, the area density of the whiskers, and the maximum and the mean length of the whiskers were measured. Based on the results of area density, the automatic methods were compared to manual counting and the Mean Absolute Percentage Error (MAPE) was determined. Finally, the reference automatic methods were compared to the self-developed method from the maximum and mean length of whiskers point of view. 相似文献
19.
CMP系统真空供给系统设计 总被引:1,自引:1,他引:0
研制了一套化学机械抛光机(CMP)专用的真空供给系统,主要由水环式真空泵、真空泵箱体、真空储气罐和水箱(汽水分离器)组成及控制模块组成。设计了水箱供水控制模块、水箱温度自动控制模块,通过控制水箱水温进而控制真空泵工作液的温度,保证真空度要求,同时也达到节约用水、降低能耗的要求。采用有限元分析软件ANSYS Workbench对真空供给系统机架进行了模态分析,研究机架的振型、固有频率,从而在结构设计上避免共振。 相似文献