Fixed‐bed column removal of chemical oxygen demand,anions, and heavy metals from paper mill wastewater by using polyaniline and polypyrrole nanocomposites on carbon nanotubes

This research endeavored to develop a new application of polypyrrole (PPy) and polyaniline (PAn) synthesized in the presence of ferric chloride and potassium iodate as oxidants and coated on carbon nanotubes (CNT). The removal of heavy metals, anions, and chemical oxygen demand from paper mill wastewater was compared when polyaniline, polypyrrole, and their nanocomposites with carbon nanotubes were used for this purpose. It was found that PPy/CNT and PAn/CNT could be used as effective adsorbents in the wastewater treatment. Also, the synthesized products were investigated in terms of morphology, molecular structure, and thermal stability by using scanning electron microscopy, Fourier‐transform infrared spectroscopy, and thermal gravimetric analysis. J. VINYL ADDIT. TECHNOL., 19:213‐218, 2013. © 2013 Society of Plastics Engineers     

Synthesis of Fe3O4/polyaniline nanocomposite and its application for nitrate removal from aqueous solutions

The aim of this work was to investigate the sorption characteristics of Fe₃O₄ coated on polyaniline (Fe₃O₄/PAn) for the removal of NO₃^? ions from aqueous solutions. The sorption of NO₃^? ions by the batch method was carried out. The optimum conditions of sorption were found to be a Fe₃O₄/PAn dose of 0.4 g in 100 mL of NO₃^? solution, a contact time of 10 min, pH and temperature 7 and 40°C, respectively. Temperature had a negative effect on the removal efficiency. Three equations, i.e., Morris–Weber, Lagergren, and pseudo‐second‐order, were tested to track the kinetics of the removal process. The Langmuir, Freundlich, and Dubinin–Radushkevich isotherm models were subjected to sorption data in order to estimate sorption capacity, intensity, and energy. The thermodynamic parameters ΔH, ΔS, and ΔG were evaluated. They showed that the adsorption of NO₃^? onto Fe₃O₄/PAn was feasible, spontaneous, and exothermic under the studied conditions. It can be concluded that Fe₃O₄/PAn has potential to remove NO₃^? ions from aqueous solutions at different concentrations. The system Fe₃O₄/Pan was successfully tested for a high removal efficiency of NO₃^? from urban wastewater. J. VINYL ADDIT. TECHNOL., 19:147–156, 2013. © 2013 Society of Plastics Engineers     

Application of anionic acrylamide‐based hydrogels in the removal of heavy metals from waste water

Crosslinked acrylamide (AM) and 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) homopolymers and copolymers were prepared by free radical solution polymerization using N,N′‐methylenebisacrylamide as the crosslinker. The chemical structures of hydrogels were characterized by FTIR analysis and the results were consistent with the expected structures. These hydrogels were used for the separation of Cd(II), Cu(II), and Fe(III) ions from their aqueous solutions. The influence of the uptake conditions such as pH, time and initial feed concentration on the metal ion binding capacity of hydrogel was also tested. The selectivity of the hydrogel towards the different metal ions tested was Cd(II) > Cu(II) > Fe(III). It was observed that the specific interaction between metal ions and ionic comonomers in the hydrogel affected the metal binding capacity of the hydrogel. The recovery of metal ions was also investigated in acid media. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Cathodic decolourisation of textile waste water containing reactive dyes using a multi‐cathode electrolyser

The reductive decolourisation of textile dyestuffs containing an azo group was investigated by direct cathodic electron transfer CI Acid Red 27 and CI Acid Yellow 9 were used as model compounds for azo dyes. Reactive dyes, eg CI Reactive Red 4, CI Reactive Orange 4, and CI Reactive Black 5, which are in technical use for cellulose dyeing were investigated as representatives of practical importance. A basic characterisation of the reduction–decolourisation behaviour of the dyes was achieved by redox titration with Fe(II)–triethanolamine as reducing agent and parallel spectrophotometric observation of changes in the chromogenic system. From the redox titration experiments basic data describing the experimental conditions for successful cathodic electron transfer can be derived. The electrochemical dyestuff reduction experiments were performed in batch trials using a multi‐cathode electrolyser with high cathode area. According to the typical composition of such dyebaths 0.12 mol dm^?3 NaOH was used as ground electrolyte. The absorbance of the investigated dyestuff solutions could be decreased to below 20% of the initial value. For a 50% decrease in absorbance, electrical energy of about 6 kWh m^?3 is consumed. The process is of particular interest for the treatment of concentrated dyestuff solutions as they are used in continuous dyeing processes. © 2001 Society of Chemical Industry     

Synthesis and optimization of PES‐Fe3O4 mixed matrix nanocomposite membrane: Application studies in water purification

A mixed matrix nanocomposite membrane comprising of polyethersulfone (PES) and nano Fe₃O₄ particles was synthesised with an aim to develop a membrane with superior ability to high water flux while maintaining salt rejection efficiency. The study focused on optimizing the effect of different percentages of nano Fe₃O₄ particles addition on the membrane pure water flux, and rejection of both the NaCl and MgSO₄. The results showed that the PES nanocomposite membrane with 15% Fe₃O₄ exhibited the highest pure water flux, while the highest rejection of NaCl and MgSO₄ belonged to the PES‐10% Fe₃O₄. The rejection sequence of PES‐10% Fe₃O₄ membrane was 68% and 82%, respectively. Also it was observed that nano Fe₃O₄ particles improved membrane hydrophilicity, and helped to construct a membrane with desire surface and cross‐section morphology. POLYM. COMPOS., 34:1870–1877, 2013. © 2013 Society of Plastics Engineers     

Synthesis,characterization, and corrosion inhibition study of polyaniline‐α‐Fe2O3 nanocomposite

Polyaniline (PANI)‐α‐Fe₂O₃ nanocomposites (NCs) have been synthesized by chemical oxidative in situ polymerization of aniline in presence of α‐Fe₂O₃ nanoparticles at 5°C using (NH₄)₂S₂O₈ as an oxidant in an aqueous solution of sodium dodecylbenzene sulphonic acid (SDBS), as surfactant and dopant under N₂ atmosphere. The room temperature conductivity of NCs decreases and coercive force (H_c) increases with an increase addition of α‐Fe₂O₃ in PANI matrix. The result of FTIR and TGA shows that the interaction between α‐Fe₂O₃ particles and PANI matrix could improve the thermal stability of NCs. NCs demonstrate the superparamagnetic behavior. The performance of PANI and PANI‐α‐Fe₂O₃ NCs as protective coating, against corrosion of 316LN stainless steel in 3.5% NaCl was assessed by potentiodynamic polarization technique. The study shows a good corrosion inhibition effect of both the coatings. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

In situ preparation of magnetic Fe3O4.Cu2O.Fe3O4/cryogel nanocomposite powder via a reduction–coprecipitation method as adsorbent for methylene blue water pollutant

Magnetic nanocomposites have attracted great attention as adsorbents for the removal of water pollutants, which respond to an external magnet that is used to remove both pollutants and composite nanomaterial traces from water. They are environmentally friendly and effective adsorbents for water treatment. In this respect, a simple in situ preparation method was used to prepare cryogel powder composite based on Fe₃O₄.Cu₂O.Fe₃O₄ nanomaterials. The ionic cryogel based on 2‐acrylamido‐2‐methylpropane sulfonate sodium salt and styrene sulfonate sodium salt was prepared by crosslinking polymerization at low temperature. The new magnetic nanoparticles based on Fe₃O₄.Cu₂O.Fe₃O₄ were successfully prepared inside the cryogel networks by a simple reduction–coprecipitation method based on reaction of Fe³⁺ with sodium sulfite and Cu²⁺ in the presence of hydroxylamine and ammonia solution. The thermal stability, accurate Fe₃O₄.Cu₂O.Fe₃O₄ content, magnetic properties, crystal lattice structure, particle sizes and morphology of the prepared cryogel composite were evaluated. The optimum conditions such as pH, contact time, adsorbate concentrations, adsorption equilibrium and adsorption kinetics were investigated to determine the efficiency of the prepared composite as an adsorbent to remove toxic methylene blue (MB) pollutant from aqueous solution. The data for MB adsorption confirmed the high ability of the prepared composite to remove more than 4.696 mmol L^?1 of MB from water during 6 min. The regeneration and reuse experiments showed excellent data for the synthesized new dye as an effective adsorbent for water treatment. © 2018 Society of Chemical Industry     

Cr(III)‐containing Fe3O4/mercaptopropanoic acid‐poly(2‐hydroxyethyl acrylate) nanocomposite: Highly active magnetic catalyst for direct hydroxylation of benzene

In this study, polymer‐grafted magnetic nanoparticles containing chromium(III) ions incorporated onto Fe₃O₄/mercaptopropanoic acid‐poly(2‐hydroxyethyl acrylate) was prepared via a simple and in situ method. The obtained magnetic nanocomposite exhibited high catalytic activity and excellent selectivity in direct hydroxylation of benzene in the presence of hydrogen peroxide under solvent‐free condition. The magnetic catalyst could be also separated by an external magnet and reused seven times without any significant loss of activity/selectivity. Due to the Lewis acidity of the Fe³⁺ groups in the structure of magnetic nanoparticles, the high efficiency of this catalyst is possibly due to the synergetic effect of Cr³⁺ and Fe³⁺ groups in the structure of magnetic nanocomposite. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40383.     

Carboxyl‐containing polyarylene ether nitrile/Fe3O4 hybrids and their effects on the PEN composites

In this study, the novel polyarylene ether nitrile containing carboxyl groups (CPEN)/Fe₃O₄ hybrids were synthesized via the solvent‐thermal route. The SEM and TEM images showed that the surface of functionalized Fe₃O₄ hybrids (CPEN‐f‐Fe₃O₄) became rough and coated with a thin polymer layer successfully. Chemical bonds were formed between the carboxyl groups and Fe₃O₄ spheres, which were characterized by FTIR and XRD. Series of PEN composite films were prepared through solution‐casting method with different contents of CPEN‐f‐Fe₃O₄ hybrids and raw Fe₃O₄ spheres. The SEM images showed that the CPEN‐f‐Fe₃O₄ hybrids became much more dispersible and compatible in PEN matrix than that of raw Fe₃O₄ spheres, which was further confirmed by rheological study. The magnetic analysis showed that the saturation magnetization of composites films increased with the increase of CPEN‐f‐Fe₃O₄ hybrids loading content. The results of thermogravimetric and mechanical study exhibited that the composite films had good thermal stability and mechanical property. POLYM. COMPOS., 36:1325–1334, 2015. © 2014 Society of Plastics Engineers     

Synthesis of magnetic Fe3O4@SiO2-(-NH2/-COOH) nanoparticles and their application for the removal of heavy metals from wastewater

In this work, Fe₃O₄@SiO₂-(-NH₂/-COOH) nanoparticles were synthesized for the removal of Cd²⁺, Pb²⁺ and Zn²⁺ ions from wastewater. The results of characterization showed that Fe₃O₄@SiO₂-(-NH₂/-COOH) was superparamagnetic with a core–shell structure. The surface of Fe3O4 was successfully coated with silica and modified with amino groups and carboxyl groups through the use of a silane coupling agent, polyacrylamide and polyacrylic acid. The dispersion of the particles was improved, and the surface area of the Fe3O4@SiO2-(-NH2/-COOH) nanoparticles was 67.8 m²/g. The capacity of Fe₃O₄@SiO₂-(-NH₂/-COOH) to adsorb the three heavy metals was in the order Pb²⁺ > Cd²⁺ > Zn²⁺, and the optimal adsorption conditions were an adsorption dose of 0.8 g/L, a temperature of 30°C and concentrations of Pb²⁺, Cd²⁺ and Zn²⁺ below 120, 80 and 20 mg/L, respectively. The maximum adsorption capacities for Pb²⁺, Cd²⁺ and Zn²⁺ were 166.67, 84.03 and 80.43 mg/g. The adsorption kinetics followed a pseudo-second-order model and Langmuir isotherm model adequately depicted the isotherm adsorption process. Thermodynamic analysis showed that the adsorption of the three metal ions was an endothermic process and that increasing the temperature was conducive to this adsorption.     

Adsorption removal of Cu2+ and Ni2+ from waste water using nano‐cellulose hybrids containing reactive polyhedral oligomeric silsesquioxanes

Cellulose is an important biomass in natural material fields. Reactive polyhedral oligomeric silsesquioxane (R‐POSS) bearing multi‐N‐methylol groups is novel high reactive POSS monomer. The nano‐cellulose hybrids containing R‐POSS were synthesized by crosslinking reaction. It was interesting to investigate properties and applications of hybrids containing R‐POSS. In this work, nano‐cellulose hybrids as novel biosorbent were used for adsorpting copper and nickel ions in aqueous solution. Adsorption kinetics and equilibrium isotherm of Cu²⁺ and Ni²⁺ on the nano‐cellulose hybrids were investigated. The results showed that R‐POSS had been grafted to cellulose macromolecule. The nano‐cellulose hybrids could form new adsorptive position for heavy metal ions. The adsorption capacities of hybrid materials were obviously higher than that of control cellulose. The adsorption of heavy metal ions on nano‐cellulose hybrids followed the second‐order model. The equilibrium isotherms for adsorpting copper and nickel ions on the hybrids followed Langmuir isotherm model. Nano‐cellulose materials containing POSS as biosorbents or ultrafiltration membranes would be used in separation of toxic heavy metal ions. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Investigation of the effect of magnetic field on mass transfer parameters of CO2 absorption using Fe3O4‐water nanofluid

In this study, the enhancement of physical absorption of carbon dioxide by Fe₃O₄‐water nanofluid under the influence of AC and DC magnetic fields was investigated. Furthermore, a gas‐liquid mass transfer model for single bubble systems was applied to predict mass transfer parameters. The coated Fe₃O₄ nanoparticles were prepared using co‐percipitation method. The results from characterization indicated that the nanoparticles surfaces were covered with hydroxyl groups and nanoparticles diameter were 10–13 nm. The findings showed that the mass transfer rate and solubility of carbon dioxide in magnetic nanofluid increased with an increase in the magnetic field strength. Results indicated that the enhancement of carbon dioxide solubility and average molar flux gas into liquid phase, particularly in the case of AC magnetic field. Moreover, results demonstrated that mass diffusivity of CO₂ in nanofluid and renewal surface factor increased when the intensity of the field increased and consequently diffusion layer thickness decreased. © 2016 American Institute of Chemical Engineers AIChE J, 63: 2176–2186, 2017     

Synthesis and characterization of Fe3O4/poly(lactide‐co‐glycolide) composite and its coating effects on magnesium alloy

The Fe₃O₄/poly(lactide‐co‐glycolide) (PLGA) composites were prepared via a surface grafting technique. Initially, the poly(lactic acid) oligomer was synthesized and surface‐grafted to Fe₃O₄ nanoparticles. Then, the grafted Fe₃O₄ particles were compounded with PLGA matrix by a simple solution blending method. The grafted Fe₃O₄ particles presented enhanced compatibility with PLGA matrix and the composites indicated enhanced dynamic mechanical performance. Electrochemical tests showed that the Fe₃O₄/PLGA composite coating can help improve the impedance of magnesium samples by 100–300%, and the impedance of the metal may be tunable by altering the components ratio of LA/GA within PLGA matrix. The composites may have potential application for magnesium alloy used in degradable medical implants. POLYM. COMPOS., 37:1369–1374, 2016. © 2014 Society of Plastics Engineers     

Synthesis and characterization of magnetite (Fe3O4)—Polyvinyl alcohol‐based nanocomposites and study of superparamagnetism

The aim of this investigation was to design iron oxide containing nanocomposites which could display superparamagnetic behavior and thus find application in biomedical and allied fields. To achieve the proposed objectives methyl methacrylate was polymerized by a redox system comprising of metabisulphite and persulphate in the immediate presence of a crosslinker, N,N′‐methylene bis acrylamide and a preformed polymer, i.e., polyvinyl alcohol. Into the prepared polymer matrix nanosized magnetite (Fe₃O₄) particles were evenly dispersed by in situ precipitation of Fe²⁺/Fe³⁺ ions. The nanocomposite materials were characterized by techniques like FTIR, SEM, TEM, XRD, and DSC. The magnetic behavior of nanocomposites and bulk magnetite particles was studied under varying applied magnetic fields and their superparamagnetic property was examined. The iron‐oxide polymer nanocomposites were also studied for microhardness. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Microwave‐Assisted Hydrothermal Synthesis of Fe2O3‐Sensitized SrTiO3 and its Luminescent Photocatalytic deNOx Activity with CaAl2O4:(Eu,Nd) Assistance

This work focused on the synthesis of high‐activity strontium titanate (SrTiO₃) photocatalysts through an environmentally friendly process. A high energy‐efficient microwave‐assisted hydrothermal method was employed to prepare Fe‐loaded SrTiO₃ that consisted of small particles around 50 nm in diameter. To achieve the effective assistance of long‐lasting fluorescence, the obtained Fe‐loaded SrTiO₃ samples were coupled with CaAl₂O₄:(Eu, Nd). The photocatalytic activities were evaluated by the photo‐decomposition of NO. Fe loaded SrTiO₃ showed high photocatalytic activities not only under visible light irradiation but also in the dark with fluorescence assistance.     

Synthesis of glycidyl methacrylate containing diethanol amine and its binary copolymers with ethyl methacrylate and butyl methacrylate as nano‐size chelating resins for removal of heavy metal ions

One of the most important applications of chelating and functional polymers is their capability to recover metal ions from their solutions. This study concerns the synthesis of a hydrophilic glycidyl methacrylate (GMA) monomer‐bearing diethanol amine (DEA) chelating group from the reaction of GMA and DEA. The formed adduct (A) was characterized via FTIR and mass spectra and subjected to homopolymerization and binary copolymerization with ethyl methacrylate and butyl methacrylate. The copolymerization process was carried out via a semi‐batch emulsion polymerization technique by using potassium persulphate/sodium bisulphite as a redox pair initiation system and sodium dodecyl benzene sulphonate as an emulsifier at 65°C. The obtained polymers were characterized via FTIR, thermal gravimetric analysis, and UV–VIS. Volume‐average diameters (D_v) in nanoscale range for the prepared polymers were confirmed by transmission electron microscope investigation. It was shown that the obtained nano‐size chelating polymers have a powerful adsorption character toward transition metal ions (Cu⁺², Cr⁺³, Ni⁺², and Co⁺²) and efficient selectivity for Cu⁺² and Ni⁺² ions at normal pH. The effects of pH, time, and different comonomer feed compositions on the uptake of metal ions were studied. The reaction between the obtained chelating resins and different metal ions was confirmed to be a second‐order reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of carbon nanotube (CNT)‐BiFeO3 and (CNT)‐Bi2Fe4O9 nanocomposites and its enhanced photocatalytic properties

Pure and carbon nanotube (CNT) attached BiFeO₃ and Bi₂Fe₄O₉ were prepared via hydrothermal route at fixed temperature, with time and mineralizer as variants. Phase purity of products was determined through X‐ray diffraction (XRD) studies. FESEM analyses revealed that synthesized materials exhibited various morphologies, depending on the mineralizer being employed in the synthesis. Optical band gap measurements have been carried out using UV‐Vis spectroscopy analyses. The attachment of CNT reduces the bandgap, and consequently enhances photocatalytic activity due to the electron transfer from BiFeO₃ to CNT. The pseudo‐first order model of reaction kinetics has been used successfully to study the associated mechanism.     

Molecular dynamics study of TiO2/poly(acrylic acid‐co‐methyl methacrylate) and Fe3O4/polystyrene composite latex particles prepared by heterocoagulation

All‐atom molecular dynamics simulations were used to study the morphology of polymer/inorganic composite particles prepared by heterocoagulation. The results were also compared to those of our previous study of the preparation of TiO₂/poly(acrylic acid‐co‐methyl methacrylate) and Fe₃O₄/polystyrene composite particles. In the simulation system, polymer or inorganic particles were simulated by surface‐charge‐modified C₆₀ or Na atoms. Through a combination of analysis of the radial distribution functions of charged atoms and snapshots of the equilibrated structure, three kinds of particle distributions were observed under different conditions. When the polymer and inorganic particles had opposite surface charges and their sizes were very different, the composite morphology showed a core–shell structure with small particles adsorbed onto the surfaces of large particles. Furthermore, when the polymer and inorganic particles had opposite surface charges but comparable sizes, the polymer and inorganic particles aggregated domain by domain. Finally, when the polymer and inorganic particles were endowed with the same surface charge, the distribution of these two types of particles was homogeneous, regardless of their size difference. The simulation results were in agreement with the experimental results. The electrostatic interaction and the size of the particles dominated the final morphology of the composite particles when the heterocoagulation method was used. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010