A Simple Copper‐Catalyzed Cascade Synthesis of 2‐Amino‐1H‐indole‐3‐carboxylate Derivatives

We have developed a simple and efficient copper‐catalyzed method for the synthesis of 2‐amino‐1H‐indole‐3‐carboxylate derivatives via cascade reactions of substituted N‐(2‐halophenyl)‐2,2,2‐trifluoroacetamide with alkyl 2‐cyanoacetate or malononitrile under mild conditions, and the method is of wide practical application.     

Palladium‐Catalyzed Intramolecular Annulation of 3‐[2‐(2‐Iodobenzylamino)aryl]‐N‐arylpropiolamides: Synthesis of 3‐[5H‐Dibenzo[b,e]azepin‐11(6H)‐ylidene]indolin‐2‐ones

A novel palladium‐catalyzed intramolecular tandem annulation method is presented for the synthesis of 3‐[5H‐dibenzo[b,e]azepin‐11(6H)‐ylidene]indolin‐2‐ones. This method allows the conversion of various 3‐[2‐(2‐iodobenzylamino)aryl]‐N‐arylpropiolamides to the corresponding 3‐[5H‐dibenzo[b,e]azepin‐11(6H)‐ylidene]indolin‐2‐ones through the diarylation of an alkyne.     

A Highly Regioselective Preparation of 4‐Chloromethyl‐5‐methyl‐2‐aryl‐1,3‐oxazoles

A facile highly regioselective process is described for the formation of 4‐chloromethyl‐1,3‐oxazoles from 1,3‐oxazole N‐oxide/HCl salts. An explanation is presented for the high regioselectivity in deoxygenation‐chlorination using POCl₃ with HCl salts compared to the corresponding free N‐oxides. The method is quite general and the products are isolated by direct precipitation in all cases studied.     

Tailoring of water‐soluble cellulose‐g‐ copolymers in homogeneous medium using single‐electron‐transfer living radical polymerization

Cellulose‐graft‐polyacrylamide and cellulose‐graft‐poly(N,N‐dimethylacrylamide) copolymers were prepared by single‐electron‐transfer living radical polymerization (SET‐LRP) in homogeneous medium. Cellulose macroinitiators for SET‐LRP, with different numbers of initiating sites along the cellulose backbone, were successfully synthesized by direct acylation of cellulose with 2‐bromoisobutyryl bromide in LiCl/dimethylacetamide. Dynamic light scattering revealed that cellulose macroinitiator molecules in dimethylsulfoxide (DMSO) exist primarily as individual chains with a certain amount of intermolecular aggregates. SET‐LRP of acrylamide and N,N‐dimethylacrylamide with the cellulose macroinitiators was carried out in DMSO solution. Formation of cellulose‐graft‐copolymers was confirmed using attenuated total reflectance Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopy, and the products were water‐soluble. High content of poly(N,N‐dimethylacrylamide) in the copolymers enhanced the thermal stability relative to that of cellulose. Scanning electron microscopy studies of cellulose‐based particles formed from the copolymers using the aerosol flow reactor method revealed spherical nanoscale structures. Copyright © 2011 Society of Chemical Industry     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

High oil‐absorptive composites based on 4‐tert‐butylstyrene‐EPDM‐divinylbenzene graft polymer

4‐tert‐Butylstyrene‐EPDM‐divinylbenzene graft polymer (PBED) was prepared by graft crosslinking polymerization in toluene using BPO as an initiator. Gel and sol of PBED were isolated by extraction with tetrahydrofuran (THF). Sol PBED can be reused as oil absorbent through cross‐linking by ultraviolet irradiation. After swelling in oil, crosslinked polymers have poor gel strength to be taken out of oil wholly at high absorbency, although they possess strong mechanical strength in their dry states. As known, composite technique is one of the useful methods for material reinforcement. Fibres, sponges and non‐woven fabrics were used as reinforcers or supporters in this work. Oil absorbency was measured by method ASTM (F726‐81) and swelling kinetics of the composite was evaluated by an experimental equation. The gel strength parameter S, the relaxation exponent n, and the fractal dimension d_f of polymer and some composites in pseudo‐critical gel state were determined from oscillatory shear measurements by a dynamic rheometer. Mechanical properties and the morphologies of some composites were measured with a tensile tester and scanning electron microscopy, respectively. © 2001 Society of Chemical Industry     

Copper(I)‐Catalyzed Stereoselective Synthesis of (1E,3E)‐2‐ Sulfonyl‐1,3‐dienes from N‐Propargylic Sulfonohydrazones

A new method for the stereoselective synthesis of highly substituted (1E,3E)‐2‐sulfonyl‐1,3‐dienes from N‐propargylic sulfonohydrazone derivatives has been developed via copper(I)‐catalyzed [3,3] rearrangement and highly regioselective migration of the sulfonyl group.     

Basic characterization of polypropene‐block‐poly(methylene‐1,3‐cyclopentane‐co‐propene) synthesized from propene and 1,5‐hexadiene with modified stopped‐flow method

Block copolymerization of propene and 1,5‐hexadiene was carried out by a modified stopped‐flow polymerization method with an MgCl₂‐supported Ziegler catalyst. The resulting polymer, polypropene‐block‐poly(methylene‐1,3‐cyclopentane‐co‐propene) (PP‐b‐(PMCP‐co‐PP)), in which the crystallizable PP part was linked with the non‐crystallizable PMCP‐co‐PP part, was characterized by optical microscopy, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and tensile testing. The block copolymer having a chemical linkage between PP and PMCP‐co‐PP showed properties different from those of homopolymer, random copolymer and blend polymer. © 2001 Society of Chemical Industry     

Enantioselective Synthesis of cis‐4‐Formyl‐β‐lactams via Chiral N‐Heterocyclic Carbene‐Catalyzed Kinetic Resolution

An efficient synthesis of optically pure cis‐4‐formyl‐β‐lactams (up to 99% ee) by a chiral NHC‐catalyzed ring expansion reaction has been realized, featuring the ready availability of both the substrate and the catalyst, and the mild reaction conditions. The current method is also suitable for the synthesis of enantioenriched 4‐formyl‐β‐lactams and succinimides containing quaternary carbon centers.     

Liquid/solid two‐phase carbonization of low‐molecular‐weight chloro‐/bromo‐hydrocarbons

A novel liquid/solid two‐phase reaction has been discovered that enables destruction of a series of low‐molecular‐weight chloro‐/bromo‐hydrocarbons to carbon‐based materials. The solid phase is anhydrous potassium hydroxide and the liquid phase is a benzene or tetrahydrofuran solution of halide and contains a certain amount of tetrabutyl ammonium bromide (TBAB) as phase transfer catalyst. The structure of the carbon‐based materials have been characterized by elemental analysis, Fourier transform infrared (FT‐IR), FT‐Raman, and X‐ray photoelectron spectroscopies, and their morphologies have been examined by wide‐angle X‐ray diffraction and transmission electron microscopy. The results indicate that the products are amorphous nanoparticles and contain mainly elemental carbon. They consist of sp, sp², and sp³ carbon atoms simultaneously and can be regarded as carbyne analogues. This work provides a convenient method for synthesizing new carbon‐based materials in relatively high yields. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1510–1515, 2000     

Gas‐sensor fabrication by a layer‐by‐layer technique using polydiacetylene

In order to increase the sensitivity of a polydiacetylene (PDA) sensor, PDA, and poly(sodium 4‐styrene‐sulfonate) (PSS) were alternately stacked to form a layer‐by‐layer (LBL) film on the quartz. In this study, N‐(2‐aminoethyl)pentacosa‐10,12‐diynamide (AEPCDA) was used as a constituent of the PDA and n‐butylamine was used as a target compound. The formed‐film sensor showed higher sensitivity than the vesicle solution. There was a large difference in sensitivity depending on the method used to form the LBL film. Unlike the vesicle solution state, the formed‐film sensor exhibited excellent reversibility in the color change caused by heat. The LBL film formed worked very well as a sensor that detects the actual gas, n‐butyl amine, showing its potential for practical applications. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44997.     

Intramolecular Photochemical Cross‐Coupling Reactions of 3‐Acyl‐2‐haloindoles and 2‐Chloropyrrole‐3‐carbaldehydes with Substituted Benzenes

Highly efficient syntheses of indolo[2,1‐a]isoquinolines, indolo[2,1‐a][2]benzazepines, pyrrolo[2,1‐a]isoquinolines and pyrrolo[1,2‐a]benzazepines in excellent yields have been achieved by the intramolecular photochemical cross‐coupling reactions of 3‐acyl‐2‐halo‐N‐(ω‐arylalkyl)indoles and 2‐chloro‐N‐(ω‐arylalkyl)pyrrole‐3‐carbaldehydes in acetone. A new heterocyclic ring system – pyrrolo[1,2‐d][1,4]benzoxazepine – has also been constructed for the first time in this work by the photocyclization of 2‐chloro‐N‐(2‐phenoxyethyl)pyrrole‐3‐carbaldehyde.     

Preparation,characterization, and properties of crosslinked hydroxylated poly(styrene‐b‐butadiene‐b‐styrene) triblock copolymer

Acrylic acid was crosslinked with N,N′‐methylenebisacrylamide and converted to bioactive hydrogels by neutralization with different amino containing compounds. Several amino containing compounds were used such as 2‐aminopyridine, triethanol amine, hexamethylenetetramine (HMTA), pyridine, and imidazole. The best crosslinker ratio was determined in addition to the maximum absorbed water in different mediums. The antibacterial activity of the prepared gels were examined against examples of Gram‐positive (Staphylococcus aureus) and Gram‐negative bacteria (Escherichia coli) using agar plate method. The study was extended by evaluating one of prepared gels in columns as models for water filters. All prepared gels showed antibacterial action in agar plate method against both bacterium and the column method using one of the prepared gels showed excellent filtration and biocidal action. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface‐active amphiphilic poly[(2‐acrylamido‐2‐methylpropanesulfonic acid)‐co‐(N‐isopropylacrylamide)] nanoparticles as stabilizer in aqueous emulsion polymerization

This work reports the effect of nanogel solid particles on the surface and interfacial tension of water/air and water/styrene interfaces. Moreover, the work aimed to use nanogels as a stabilizer for miniemulsion aqueous polymerization. A series of amphiphilic crosslinked N‐isopropylacrylamide (NIPAm) and 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) copolymer nanogels were synthesized based on an aqueous copolymerization batch method. Divinylbenzene and N,N‐methylene bisacrylamide were used as crosslinkers. The morphologies of the prepared nanogels were investigated using transmission and scanning electron microscopies. The lower critical transition temperatures were determined using differential scanning calorimetry. The surface tension of colloidal NIPAm/AMPS dispersions was measured as functions of surface age, temperature and the morphology of the NIPAm/AMPS nanogels. The NIPAm/AMPS nanogels reduced the surface tension of water to about 30.1 mN m^?1 at 298 K with a small increase at 313 K. Surface activities of these nanogels in water were determined by surface tension measurements. The NIPAm/AMPS dispersions had high surface activity and were used as a stabilizer to prepare a crosslinked poly(styrene‐co‐AMPS) microgel based on emulsion crosslinking polymerization. © 2013 Society of Chemical Industry     

Electric‐field‐induced layer‐by‐layer fabrication of stable second‐order nonlinear optical films

BACKGROUND: Second‐order nonlinear optical (NLO) films have been made using electric field poling polymer and Langmuir–Blodgett techniques with non‐centrosymmetric structures that exhibit relatively high values of nonlinear susceptibility (χ²), but the shortcomings of insufficient temporal or mechanical stability have restricted their potential applications. In this study, electric‐field‐induced layer‐by‐layer assembly was investigated as an effective technique to prepare low molecular weight chromophoric (LMWC) molecules of high degree of self‐ordering and density in NLO films. RESULTS: A new and stable LMWC molecule, 2‐({4‐[4‐(2‐carboxy‐2‐cyanovinyl)‐Z‐phenylazo]‐phenyl}‐methylamino)‐ethyl acid (DRCB), was first designed and synthesized successfully. The chromophore possesses two negative groups, one at each end, and still retains molecular polarity after ionization. DRCB was successfully assembled with polycationic diazoresin using the electric‐field‐induced layer‐by‐layer assembly method to construct stable organic second‐order NLO multilayer films. Upon UV irradiation, the interaction between multilayers was converted from an electrostatic interaction to covalent bonds. CONCLUSION: Due to the DC electric field effect in the assembly process, in addition to introducing the stable chromophore molecule and the covalent crosslinking structure in the films, the second‐order NLO films fabricated using the method described have large second harmonic generation response, good thermal stability and excellent chemical stability, which offer potential advantages for device applications. Copyright © 2009 Society of Chemical Industry     

Synthesis of 4‐Aryl‐2(5H)‐furanones by Gold(I)‐Catalyzed Intramolecular Annulation

A novel method that involves intramolecular annulation and a new type of rearrangement has been developed for the synthesis of 4‐aryl‐2(5H)‐furanones. A variety of prop‐2‐ynyl 3‐oxo‐3‐phenylpropanoates undergo annulation cyclization in the presence of chloro(triphenylphosphine)gold and trifluoromethanesulfonic to afford the desired products in moderate to high yields.     

Surface microphase separation in PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films

Well‐defined poly(dimethylsiloxane)‐block‐poly(methyl methacrylate)‐block‐poly(2,2,3,3,4,4,4‐heptafluorobutyl methacrylate) (PDMS‐b‐PMMA‐b‐PHFBMA) triblock copolymers were synthesized via atom transfer radical polymerization (ATRP). Surface microphase separation in the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films was investigated. The microstructure of the block copolymers was investigated by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Surface composition was studied by X‐ray photoelectron spectroscopy (XPS). The chemical composition at the surface was determined by the surface microphase separation in the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films. The increase of the PHFBMA content could strengthen the microphase separation behavior in the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymer films and reduce their surface tension. Comparison between the PDMS‐b‐PMMA‐b‐PHFBMA triblock copolymers and the PDMS‐b‐PHFBMA diblock copolymers showed that the introduction of the PMMA segments promote the fluorine segregation onto the surface and decrease the fluorine content in the copolymers with low surface energy. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Improvement of the production of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) terpolyester by manipulating the culture condition

BACKGROUND: The aim of this work is to enhance the production of terpolyester poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐3HV‐co‐4HB)) produced by a locally isolated bacterium, Cupriavidus sp. USMAA2‐4. The monomer composition was varied by supplementing different carbon precursors and by manipulating the culture condition through one‐stage cultivation. The effect of C/N ratio and different concentrations of carbon source and precursors were investigated in order to produce higher content of this terpolyester. Although research on this biodegradable polyester is abundant, studies on terpolyester P(3HB‐co‐3HV‐co‐4HB) are still limited. RESULTS: Supplementation of oleic acid in accumulation medium increased the bacterial growth and polyhydroxyalkanoate (PHA) accumulation. It was also shown that medium consisting of assorted carbon precursors at C/N 20 gave relatively high dry cell weight and P(3HB‐co‐3HV‐co‐4HB) content. Various compositions of terpolyester were obtained when the concentration of oleic acid and 4HB precursors were manipulated. The combination of oleic acid with γ‐butyrolactone and 1‐pentanol was found to be the best combination to produce high PHA content (81 wt%). The composition of monomer in P(3HB‐co‐3HV‐co‐4HB) was produced in the range 8–13 mol% for 3HV and 9–24 mol% for 4HB, respectively. CONCLUSIONS: The production of P(3HB‐co‐3HV‐co‐4HB) in shake‐flasks successfully produced 81 wt% of PHA content. This manipulated culture condition can be used at larger scale to provide modeling for the production of terpolyester in a bioreactor. Copyright © 2012 Society of Chemical Industry     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

High tensile strength fiber of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] processed by two‐step drawing with intermediate annealing

High tensile strength fibers of poly[(R)‐3‐hydroxybutyrate‐co‐(R)‐3‐hydroxyhexanoate] [P(3HB‐co‐3HH)], a type of microbial polyesters, were processed by one‐step and two‐step cold‐drawn method with intermediate annealing. Thermal degradation behaviors were characterized by differential scanning calorimeter and gel permeation chromatography measurements. Thermal analyses were revealed that molecular weights decreased drastically within melting time at a few minute. One‐step cold‐drawn fiber with drawing ratio of 10 showed tensile strength of 281 MPa, while tensile strength of as‐spun fiber was 78 MPa. When two‐step drawing was applied for P(3HB‐co‐3HH) fibers, the tensile strength was led to 420 MPa. Furthermore, the optimization of intermediate annealing condition leads to enhance the tensile strength at 552 MPa of P(3HB‐co‐3HH) fiber. Wide‐angel X‐ray diffraction measurements of these fibers suggest that the fibers with high tensile strength include much amount of the planer‐zigzag conformation (β‐form) as molecular conformation together with 2₁ helix conformation (α‐form). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41258.