Conformations of primary amphipathic carrier peptides in membrane mimicking environments

Two peptides designed for drug delivery were generated by the combination of a signal peptide with a nuclear localization sequence and are shown to facilitate the cellular internalization of small molecules which are covalently linked to these peptides. In order to understand the mechanism of internalization, the conformations of the peptides were investigated through different approaches both in solution and in membrane-mimicking environments. These peptides are highly versatile and adopt different conformational states depending on their environment. While in a disordered form in water, they adopt an alpha-helical structure in TFE and in the presence of micelles of SDS or DPC. The structured domain encompasses the hydrophobic part of the peptides, whereas the charged C-termini remain unstructured. In contrast, in the presence of lipids and whatever the nature of the phosphate headgroup, the two peptides mainly adopt an antiparallel beta-sheet form and embed in the lipidic cores. This result suggests that the beta-sheet is responsible for the translocation through the cellular membranes but also questions the conformational state of signal peptides when associated to hydrophilic sequences.     

A novel, multilayer structure of a helical peptide

X-ray diffraction analysis at 1.5 A resolution has confirmed the helical conformation of a de novo designed 18-residue peptide. However, the crystal structure reveals the formation of continuous molecular layers of parallel-packed amphiphilic helices as a result of much more extensive helix-helix interactions than predicted. The crystal packing arrangement, by virtue of distinct antiparallel packing interactions, segregates the polar and apolar surfaces of the helices into discrete and well-defined interfacial regions. An extensive "ridges-into-grooves" interdigitation characterizes the hydrophobic interface, whereas an extensive network of salt bridges and hydrogen bonds dominates the corresponding hydrophilic interface.     

Solution structure of amyloid beta-peptide(1-40) in a water-micelle environment. Is the membrane-spanning domain where we think it is?

The three-dimensional solution structure of the 40 residue amyloid beta-peptide, Abeta(1-40), has been determined using NMR spectroscopy at pH 5.1, in aqueous sodium dodecyl sulfate (SDS) micelles. In this environment, which simulates to some extent a water-membrane medium, the peptide is unstructured between residues 1 and 14 which are mainly polar and likely solvated by water. However, the rest of the protein adopts an alpha-helical conformation between residues 15 and 36 with a kink or hinge at 25-27. This largely hydrophobic region is likely solvated by SDS. Based on the derived structures, evidence is provided in support of a possible new location for the transmembrane domain of Abeta within the amyloid precursor protein (APP). Studies between pH 4.2 and 7.9 reveal a pH-dependent helix-coil conformational switch. At the lower pH values, where the carboxylate residues are protonated, the helix is uncharged, intact, and lipid-soluble. As the pH increases above 6. 0, part of the helical region (15-24) becomes less structured, particularly near residues E22 and D23 where deprotonation appears to facilitate unwinding of the helix. This pH-dependent unfolding to a random coil conformation precedes any tendency of this peptide to aggregate to a beta-sheet as the pH increases. The structural biology described herein for Abeta(1-40) suggests that (i) the C-terminal two-thirds of the peptide is an alpha-helix in membrane-like environments, (ii) deprotonation of two acidic amino acids in the helix promotes a helix-coil conformational transition that precedes aggregation, (iii) a mobile hinge exists in the helical region of Abeta(1-40) and this may be relevant to its membrane-inserting properties and conformational rearrangements, and (iv) the location of the transmembrane domain of amyloid precursor proteins may be different from that accepted in the literature. These results may provide new insight to the structural properties of amyloid beta-peptides of relevance to Alzheimer's disease.     

Crystal structure of CcdB, a topoisomerase poison from E. coli

The crystal structure of CcdB, a protein that poisons Escherichia coli gyrase, was determined in three crystal forms. The protein consists of a five-stranded antiparallel beta-pleated sheet followed by a C-terminal alpha-helix. In one of the loops of the sheet, a second small three-stranded antiparallel beta-sheet is inserted that sticks out of the molecule as a wing. This wing contains the LysC proteolytic cleavage site that is protected by CcdA and, therefore, forms a likely CcdA recognition site. A dimer is formed by sheet extension and by extensive hydrophobic contacts involving three of the five methionine residues and the C terminus of the alpha-helix. The surface of the dimer on the side of the alpha-helix is overall negatively charged, while the opposite side as well as the wing sheet is dominated by positive charges. We propose that the CcdB dimer binds into the central hole of the 59 kDa N-terminal fragment of GyrA, after disruption of the head dimer interface of GyrA.     

Solution structure of the glycosylated second type 2 module of fibronectin

Fibronectin is an extracellular matrix glycoprotein that plays a role in a number of physiological processes involving cell adhesion and migration. The modules of the fibronectin monomer are organized into proteolytically resistant domains that in isolation retain their affinity for various ligands. The tertiary structure of the glycosylated second type 2 module (2F2) from the gelatin-binding domain of fibronectin was determined by two-dimensional nuclear magnetic resonance spectroscopy and simulated annealing. The structure is well defined with an overall fold typical of F2 modules, showing two double-stranded antiparallel beta-sheets and a partially solvent-exposed hydrophobic cluster. An N-terminal beta-sheet, that was not present in previously determined F2 module structures, may be important for defining the relative orientation of adjacent F2 modules in fibronectin. This is the first three-dimensional structure of a glycosylated module of fibronectin, and provides insight into the possible role of the glycosylation in protein stability, protease resistance and modulation of collagen binding. Based on the structures of the isolated modules, models for the 1F22F2 pair were generated by randomly changing the orientation of the linker peptide between the modules. The models suggest that the two putative collagen binding sites in the pair form discrete binding sites, rather than combining to form a single binding site.     

A buried polar interaction can direct the relative orientation of helices in a coiled coil

Coiled coils consist of bundles of two or more alpha-helices that are aligned in a parallel or an antiparallel relative orientation. The designed peptides, Acid-p1 and Base-p1, associate in solution to form a parallel, heterodimeric two-stranded coiled coil [O'Shea, E. K., Lumb, K. J., and Kim, P. S. (1993) Curr. Biol. 3, 658]. The buried interface of this complex is formed by hydrophobic Leu residues, with the exception of an Asn residue from each strand that is positioned to engage in a buried polar interaction. Substitution of these buried Asn residues by Leu residues results in a loss of structural uniqueness, as evidenced by a lack of a particular helix orientation in the Acid-Base coiled-coil complex [Lumb, K. J., and Kim, P. S. (1995) Biochemistry 34, 8642]. Here, we alter the positions of the Asn residues in the Acid and Base peptides such that a buried polar interaction is only expected to occur when the helices are in an antiparallel orientation. The resulting peptides, Acid-a1 and Base-a1, associate to form a helical heterodimer, as shown by circular dichroism (CD) and equilibrium sedimentation centrifugation. The helix orientation preference has been measured using covalently linked, disulfide-containing heterodimers in which the constituent peptides are constrained to interact in either a parallel or an antiparallel orientation. Although both the parallel and antiparallel heterodimers form stable, helical structures, the antiparallel heterodimer is the predominant species at equilibrium when the heterodimers are allowed to undergo thiol-disulfide exchange. In addition, the antiparallel heterodimer is more stable to chemical denaturation than the parallel counterpart by approximately 2.3 kcal/mol. These results demonstrate that a single buried polar interaction in the interface between the helices of a coiled coil is sufficient to determine the relative orientation of its constituent helices.     

Molecular mechanisms of calmodulin's functional versatility

Calmodulin (CaM) is a primary Ca2+-binding protein found in all eukaryotic cells. It couples the intracellular Ca2+ signal to many essential cellular events by binding and regulating the activities of more than 40 different proteins and enzymes in a Ca2+-dependent manner. CaM contains two structurally similar domains connected by a flexible central linker. Each domain of the protein binds two Ca2+ ions with positive cooperativity. The binding of Ca2+ transforms the protein into its active form through a reorientation of the existing helices of the protein. The two helices in each helix-loop-helix Ca2+-binding motif are almost antiparallel in Ca2+-free CaM. The binding of Ca2+ induces concerted helical pair movements and changes the two helices in each Ca2+ binding motif to a nearly perpendicular orientation. These concerted helix pair movements are accompanied by dramatic changes on the molecular surface of the protein. Rather than exhibiting a flat, hydrophilic molecular surface as seen in Ca2+-free CaM, the Ca2+-saturated form of the protein contains a Met-rich, cavity-containing hydrophobic surface in each domain. These hydrophobic surfaces are largely responsible for the binding of CaM to its targets. The unique flexibility and high polarizability of the Met residues located at the entrance of each hydrophobic pocket together with other hydrophobic amino acid residues create adjustable, sticky interaction surface areas that can accommodate CaM's targets, which have various sizes and shapes. Therefore, CaM is able to bind to a large array of targets without obvious sequence homology. Upon binding to its target peptides, the unwinding of the central linker allows the two domains of the protein to engulf the hydrophobic face of target peptides of differing lengths. The binding of Ca2+ reduces the backbone flexibility of CaM. Formation of complexes with its target peptides further decreases the backbone motion of CaM.     

Similarities and differences between human cyclophilin A and other beta-barrel structures. Structural refinement at 1.63 A resolution

The structure of the unligated recombinant human cyclophilin A (CyP A) has been refined to an R-factor of 0.18 at 1.63 A resolution. The root-mean-squared deviations of the refined structure are 0.013 A and 2.50 degrees from ideal geometries of bond length and bond angle, respectively. Eight antiparallel beta-strands of CyP A form a right-handed beta-barrel. The structure of CyP A is compared with other members in the antiparallel eight-stranded beta-barrel family and with the parallel eight-stranded alpha/beta barrels. Although all known eight-stranded barrels are right-handed, the tilted angle of the strands against the barrel axis varies from 45 degrees for retinol binding protein and 49 degrees for CyP A to 70 degrees for superoxide dismutase. As a result, the beta-barrel of CyP A is not completely superimposable with other members of beta-barrels. The structure of CyP A has a unique topology, distinct from other members in the beta-barrel family. In addition, CyP A is a closed beta-barrel so that neither the immunosuppressive drug cyclosporin A (CsA) nor the proline-containing substrate can bind to the hydrophobic core of the CyP A barrel, while the hydrophobic core of most other barrels is open for ligation. These observations probably indicate that CyP A is neither functionally nor evolutionally related to other beta-barrel structures. Details of interactions between solvent molecules and the active site residues of CyP A are illustrated. A water-co-operated mechanism, where the cis<-->trans isomerization might possibly consist of (1) transition of the prolyl bond and (2) release of N or C-terminal residues of substrate from CyP, is addressed. The refined structure reveals no disulfide bridges in CyP A. Cys115 is near the CsA site, but unlikely to be directly involved in CsA binding because of steric hindrance from Thr119 and Leu122. This geometry probably rules out any mechanisms involving a tetrahedral intermediate formed between cysteine and substrate during cis<-->trans isomerization.     

Contribution of the hydrophobicity gradient of an amphipathic peptide to its mode of association with lipids

A class of peptides that associate with lipids, known as oblique-orientated peptides, was recently described [Brasseur R., Pillot, T., Lins, L., Vandekerckhove, J. & Rosseneu, M. (1997) Trends Biochem. Sci. 22, 167-171]. Due to an asymmetric distribution of hydrophobic residues along the axis of the alpha-helix, such peptides adopt an oblique orientation which can destabilise membranes or lipid cores. Variants of these oblique peptides, designed to have an homogeneous distribution of hydrophobic and hydrophilic residues along the helical axis, are classified as regular amphipathic peptides. These peptides are expected to lie parallel to the polar/apolar interface with their hydrophobic residues directed towards the apolar and their hydrophilic residues towards the polar phase. An hydrophobic, oblique-orientated peptide was identified at residues 56-68 in the sequence of the lecithin-cholesterol acyltransferase (LCAT), enzyme. This peptide is predicted to penetrate a lipid bilayer at an angle of 40 degrees through its more hydrophobic C-terminal end and thereby induce the destabilisation of a membrane or a lipid core. The LCAT-(56-68) wild-type peptide was synthesised together with the LCAT-(56-68, 0 degrees) variant, in which the hydrophobicity gradient was abolished through residue permutations. In two other variants, designed to keep their oblique orientation, the W61 residue was shifted either towards the more hydrophilic N-terminal at residue 57, or to position 68 at the hydrophobic C-terminal end of the peptide. Peptide-induced vesicle fusion was demonstrated by fluorescence measurements using pyrene-labeled vesicles and by monitoring of vesicle size by gel filtration. The interaction between peptides and lipids was monitored by measurement of the intrinsic tryptophan fluorescence emission of the peptides. Fluorescence polarisation measurements, using diphenyl hexatriene, were carried out to follow changes in the lipid fluidity. The LCAT-(56-68) wild-type peptide and the two oblique variants, induced fusion of unilamellar dimyristoylglycerophosphocholine vesicles. Tryptophan fluorescence emission measurements showed a 12-14 nm blue shift upon addition of the wild-type peptide and of the W61-->68 variant to lipids, whereas the fluorescence of the W61-->57 variant did not change significantly. This observation supports the insertion of the more hydrophobic C-terminal residues into the lipid phase, as predicted by the theoretical calculations. In contrast, the 0 degrees variant peptide had no fusogenic activity, and it associated with lipids to form small discoidal lipid/peptide complexes. The phospholipid transition temperature was decreased after addition of the wild-type, the W61-->68 and W61-->57 fusogenic peptides, whereas the opposite effect was observed with the 0 degrees variant. The behaviour of the wild-type and variant LCAT-(56-68) peptides stresses the contribution of the hydrophobicity gradient along the axis of an amphipathic peptide to the mode of association of this peptide with lipids. This parameter consequently influences the structural modifications occurring to lipids upon association with amphipathic peptides.     

Determination of the transmembrane topology of yeast Sec61p, an essential component of the endoplasmic reticulum translocation complex

Sec61p is a highly conserved integral membrane protein that plays a role in the formation of a protein-conducting channel required for the translocation of polypeptides into, and across, the membrane of the endoplasmic reticulum. As a major step toward elucidating the structure of the endoplasmic reticulum translocation apparatus, we have determined the transmembrane topology of Sec61p using a combination of C-terminal reporter-domain fusions and the in situ digestion of specifically inserted factor Xa protease cleavage sites. Our data indicate the presence of 10 transmembrane domains, including several with surprisingly limited hydrophobicity. Furthermore, we provide evidence for complex intramolecular interactions in which these weakly hydrophobic domains require C-terminal sequences for their correct topogenesis. The incorporation of sequences with limited hydrophobicity into the bilayer may play a vital role in the formation of an aqueous membrane channel required for the translocation of hydrophilic polypeptide chains.     

Effect of thymine tract length on the structure and stability of model telomeric sequences

DNA from the telomeres at the ends of eukaryotic chromosomes contains a stretch of simple tandemly repeated sequences in which clusters of G residues alternate with clusters of T/A sequences along one DNA strand. Model telomeric G-clusters form four-stranded structures in Na+ or K+, stabilized by Hoogsteen pairing between G bases. DNA containing a single copy of the G-cluster can self-associate to form tetramers, with a parallel-stranded, right-handed helical structure. Two copies of the 3'-terminal G strand form a folded-back hairpin that dimerizes to create an antiparallel quadruplex structure. We show here that the tetrameric structure is strongly influenced by the T residue flanking either side of the G-cluster. The parallel tetraplex formed by single copies of the sequences dTnG4 is most stable for n = 1 and least stable for n = 8, the longest tract we have studied. At least two thymine residues are required to allow formation of antiparallel folded-back hairpin dimers from two-copy oligomers of sequence d(TnG4)2 in Na+; additional T's destabilize this structure. In K+, the predominant structure formed is the four-stranded parallel tetramer in all cases. Kinetic analysis indicates that the quadruplex structure formed by Oxytricha telomeric DNA overhangs in the presence of Na+ arises by dimerization of two Hoogsteen base-paired hairpins, with a relatively low energy barrier.     

Three-dimensional solution structure of the 44 kDa ectodomain of SIV gp41

The solution structure of the ectodomain of simian immunodeficiency virus (SIV) gp41 (e-gp41), consisting of residues 27-149, has been determined by multidimensional heteronuclear NMR spectroscopy. SIV e-gp41 is a symmetric 44 kDa trimer with each subunit consisting of antiparallel N-terminal (residues 30-80) and C-terminal (residues 107-147) helices connected by a 26 residue loop (residues 81-106). The N-terminal helices of each subunit form a parallel coiled-coil structure in the interior of the complex which is surrounded by the C-terminal helices located on the exterior of the complex. The loop region is ordered and displays numerous intermolecular and non-sequential intramolecular contacts. The helical core of SIV e-gp41 is similar to recent X-ray structures of truncated constructs of the helical core of HIV-1 e-gp41. The present structure establishes unambiguously the connectivity of the N- and C-terminal helices in the trimer, and characterizes the conformation of the intervening loop, which has been implicated by mutagenesis and antibody epitope mapping to play a key role in gp120 association. In conjunction with previous studies, the solution structure of the SIV e-gp41 ectodomain provides insight into the binding site of gp120 and the mechanism of cell fusion. The present structure of SIV e-gp41 represents one of the largest protein structures determined by NMR to date.     

Structure of the carboxy-terminal LIM domain from the cysteine rich protein CRP

The three dimensional solution structure of the carboxy terminal LIM domain of the avian Cysteine Rich Protein (CRP) has been determined by nuclear magnetic resonance spectroscopy. The domain contains two zinc atoms bound independently in CCHC (C = Cys, H = His) and CCCC modules. Both modules contain two orthogonally-arranged antiparallel beta-sheets, and the CCCC module contains an alpha-helix at its C terminus. The modules pack due to hydrophobic interactions forming a novel global fold. The structure of the C-terminal CCCC module is essentially identical to that observed for the DNA-interactive CCCC modules of the GATA-1 and steroid hormone receptor DNA binding domains, raising the possibility that the LIM motif may have a DNA binding function.     

Three-dimensional molecular modeling of bovine caseins: a refined, energy-minimized kappa-casein structure

A refined three-dimensional molecular model of kappa-casein has been produced using energy minimization techniques and a Kollman force field on a previously reported predicted three-dimensional structure. This initial model was constructed via molecular modeling techniques from sequence-based secondary structural prediction algorithms. Both the initial and refined structures agreed with global secondary structure analysis from vibration spectroscopy. The refined structure contained many of the features of the initial model, including two sets of antiparallel beta-sheet structures containing predominantly hydrophobic side chains, which could form interaction sites with alpha s1-casein. Two types of energy-minimized dimer and tetramer models are presented: 1) using Cys as potential intermolecular disulfide binding sites and 2) using the two sheets as possible hydrophobic self-association sites, without Cys interactions. All structures yielded good stabilization energies and are in agreement with chemical, biochemical, and physical chemical results obtained for kappa-casein.     

Improved contractility and coronary flow in isolated hearts after 1-day hypothermic preservation with isoflurane is not dependent on K(ATP) channel activation

S8 is one of the core ribosomal proteins. It binds to 16 S RNA with high affinity and independently of other ribosomal proteins. It also acts as a translational repressor in Escherichia coli by binding to its own mRNA. The structure of Thermus thermophilus S8 has been determined by the method of multiple isomorphous replacement at 2.9 A resolution and refined to a crystallographic R-factor of 16.2% (Rfree 27.5%). The two domains of the structure have an alpha/beta fold and are connected by a long protruding loop. The two molecules in the asymmetric unit of the crystal interact through an extensive hydrophobic core and form a tightly associated dimer, while symmetry-related molecules form a joint beta-sheet of mixed type. This type of protein-protein interaction could be realized within the ribosomal assembly. A comparison of the structures of T. thermophilus and Bacillus stearothermophilus S8 shows that the interdomain loop is eight residues longer in the former and reveals high structural conservation of an extensive region, located in the C-terminal domain. From mutational studies this region was proposed earlier to be involved in specific interaction with RNA. On the basis of these data and on the comparison of the two structures of S8, it is proposed that the three-dimensional structure of specific RNA binding sites in ribosomal proteins is highly conserved among different species.     

Complement activation by cross-linked truncated and chimeric full-length beta-amyloid

The activation of complement by beta-amyloid (A beta) has been implicated in the local inflammatory response in Alzheimer's disease. To assess the structural parameters required for this activation, beta-sheet-containing fibrils of A beta1-28 were induced by low pH and then chemically cross-linked to constrain the beta-sheet conformation. Chimeric A beta peptides with a substituted C-terminal sequence derived from two different transmembrane proteins were also assessed for the ability to form fibrils rich in beta-sheet structure and to activate complement. Both the cross-linked A beta1-28 and the chimeric A beta peptides were strong activators of the classical complement pathway. These results suggest that the C-terminal residues (29-42) of A beta facilitate fibril assembly required for complement activation but do not contain the interaction sites required for complement activation, further supporting the hypothesis that C1q binds to the N-terminal hydrophilic domain of A beta, and that a fibrillar beta-sheet-rich conformation is required for effective binding and activation of C1.