Cheddar Cheese Ripening and Flavor Characterization: A Review

Cheddar cheese is a biochemically dynamic product that undergoes significant changes during ripening. Freshly made curds of various cheese varieties have bland and largely similar flavors and aroma and, during ripening, flavoring compounds are produced that are characteristic of each variety. The biochemical changes occurring during ripening are grouped into primary events including glycolysis, lipolysis, and proteolysis followed by secondary biochemical changes such as metabolism of fatty acids and amino acids which are important for the production of secondary metabolites, including a number of compounds necessary for flavor development. A key feature of cheese manufacture is the metabolism of lactose to lactate by selected cultures of lactic acid bacteria. The rate and extent of acidification influence the initial texture of the curd by controlling the rate of demineralization. The degree of lipolysis in cheese depends on the variety of cheese and may vary from slight to extensive; however, proteolysis is the most complex of the primary events during cheese ripening, especially in Cheddar-type cheese.     

Monitoring the ripening process of Cheddar cheese based on hydrophilic component profiling using gas chromatography-mass spectrometry

We proposed an application methodology that combines metabolic profiling with multiple appropriate multivariate analyses and verified it on the industrial scale of the ripening process of Cheddar cheese to make practical use of hydrophilic low-molecular-weight compound profiling using gas chromatography-mass spectrometry to design optimal conditions and quality monitoring of the cheese ripening process. Principal components analysis provided an overview of the effect of sodium chloride content and kind of lactic acid bacteria starter on the metabolic profile in the ripening process of Cheddar cheese and orthogonal partial least squares-discriminant analysis unveiled the difference in characteristic metabolites. When the sodium chloride contents were different (1.6 and 0.2%) but the same lactic acid bacteria starter was used, the 2 cheeses were classified by orthogonal partial least squares-discriminant analysis from their metabolic profiles, but were not given perfect discrimination. Not much difference existed in the metabolic profile between the 2 cheeses. Compounds including lactose, galactose, lactic acid, 4-aminobutyric acid, and phosphate were identified as contents that differed between the 2 cheeses. On the other hand, in the case of the same salt content of 1.6%, but different kinds of lactic acid bacteria starter, an excellent distinctive discrimination model was obtained, which showed that the difference of lactic acid bacteria starter caused an obvious difference in metabolic profiles. Compounds including lactic acid, lactose, urea, 4-aminobutyric acid, galactose, phosphate, proline, isoleucine, glycine, alanine, lysine, leucine, valine, and pyroglutamic acid were identified as contents that differed between the 2 cheeses. Then, a good sensory prediction model for “rich flavor,” which was defined as “thick and rich, including umami taste and soy sauce-like flavor,” was constructed based on the metabolic profile during ripening using partial least squares regression analysis. The amino acids proline, leucine, valine, isoleucine, pyroglutamic acid, alanine, glutamic acid, glycine, lysine, tyrosine, serine, phenylalanine, methionine, aspartic acid, and ornithine were extracted as ripening process markers. The present study is not limited to Cheddar cheese and can be applied to various maturation-type natural cheeses. This study provides the technical platform for designing optimal conditions and quality monitoring of the cheese ripening process.     

A survey of lipolytic and glycolytic end-products in commercial Cheddar enzyme-modified cheese

The concentrations of L- and D-lactic acid and free fatty acids, C4:0 to C18:3, were quantified in a range of commercial enzyme-modified Cheddar cheeses. Lactic acid in Cheddar enzyme-modified cheeses varied markedly depending on the manufacturer. Differences in the ratio of L- to D-lactic acid indicate that cheeses of different age were used in their manufacture or contained varying levels of nonstarter lactic acid bacteria. The level of lipolysis in enzyme-modified cheese was higher than in natural Cheddar cheese; butyrate was the predominant free fatty acid. The addition of exogenous acetate, lactate, and butyrate was also indicated in some enzyme-modified cheeses and may be used to confer a specific flavor characteristic or reduce the pH of the product. Propionate was also found in some enzyme-modified cheese products and most likely originated from Swiss-type cheese used in their manufacture. Propionate is not normally associated with natural Cheddar cheese flavor; however, it may be important in the flavor and aroma of Cheddar enzyme-modified cheese. Levels of lipolysis and glycolysis appear to highly controlled as interbatch variability was generally low. Overall, the production of enzyme-modified Cheddar cheese involves manipulation of the end-products of glycolysis (lactate, propionate, and acetate) and lipolysis to generate products for specific applications.     

Insoluble calcium content and rheological properties of Colby cheese during ripening

Colby cheese was made using different manufacturing conditions (i.e., varying the lactose content of milk and pH values at critical steps in the cheesemaking process) to alter the extent of acid development and the insoluble and total Ca contents of cheese. Milk was concentrated by reverse osmosis (RO) to increase the lactose content. Extent of acid development was modified by using high (HPM) and low (LPM) pH values at coagulant addition, whey drainage, and curd milling. Total Ca content was determined by atomic absorption spectroscopy, and the insoluble (INSOL) Ca content of cheese was measured by the cheese juice method. The rheological and melting properties of cheese were measured by small amplitude oscillatory rheometry and UW-Melt Profiler, respectively. There was very little change in pH during ripening even in cheese made from milk with high lactose content. The initial (d 1) cheese pH was in the range of 4.9 to 5.1. The INSOL Ca content of cheese decreased during the first 4 wk of ripening. Cheeses made with the LPM had lower INSOL Ca content during ripening compared with cheese made with HPM. There was an increase in melt and maximum loss tangent values during ripening except for LPM cheeses made with RO-concentrated milk, as this cheese had pH <4.9 and exhibited limited melt. Curd washing reduced the levels of lactic acid produced during ripening and resulted in significantly higher INSOL Ca content. The use of curd washing for cheeses made from high lactose milk prevented a large pH decrease during ripening; high rennet and draining pH values also retained more buffering constituents (i.e., INSOL Ca phosphate), which helped prevent a large pH decrease.     

Biochemistry of cheese ripening

Rennet-coagulated cheeses are ripened for periods ranging from about two weeks to two or more years depending on variety. During ripening, microbiological and biochemical changes occur that result in the development of the flavour and texture characteristic of the variety. Biochemical changes in cheese during ripening may be grouped into primary (lipolysis, proteolysis and metabolism of residual lactose and of lactate and citrate) or secondary (metabolism of fatty acids and of amino acids) events. Residual lactose is metabolized rapidly to lactate during the early stages of ripening. Lactate is an important precursor for a series of reactions including racemization, oxidation or microbial metabolism. Citrate metabolism is of great importance in certain varieties. Lipolysis in cheese is catalysed by lipases from various source, particularly the milk and cheese microflora, and, in varieties where this coagulant is used, by enzymes from rennet paste. Proteolysis is the most complex biochemical event that occurs during ripening and is catalysed by enzymes from residual coagulant, the milk (particularly plasmin) and proteinases and peptidases from lactic acid bacteria and, in certain varieties, other microorganisms that are encouraged to grow in or on the cheese. Secondary reactions lead to the production of volatile flavour compounds and pathways for the production of flavour compounds from fatty acids and amino acids are also reviewed.     

Influence of calcium and phosphorus, lactose, and salt-to-moisture ratio on Cheddar cheese quality: changes in residual sugars and water-soluble organic acids during ripening

Cheddar cheese ripening involves the conversion of lactose to glucose and galactose or galactose-6-phosphate by starter and nonstarter lactic acid bacteria. Under ideal conditions (i.e., where bacteria grow under no stress of pH, water activity, and salt), these sugars are mainly converted to lactic acid. However, during ripening of cheese, survival and growth of bacteria occurs under the stressed condition of low pH, low water activity, and high salt content. This forces bacteria to use alternate biochemical pathways resulting in production of other organic acids. The objective of this study was to determine if the level and type of organic acids produced during ripening was influenced by calcium (Ca) and phosphorus (P), residual lactose, and salt-to-moisture ratio (S/M) of cheese. Eight cheeses with 2 levels of Ca and P (0.67 and 0.47% vs. 0.53 and 0.39%, respectively), lactose at pressing (2.4 vs. 0.78%), and S/M (6.4 vs. 4.8%) were manufactured. The cheeses were analyzed for organic acids (citric, orotic, pyruvic, lactic, formic, uric, acetic, propanoic, and butyric acids) and residual sugars (lactose, galactose) during 48 wk of ripening using an HPLC-based method. Different factors influenced changes in concentration of residual sugars and organic acids during ripening and are discussed in detail. Our results indicated that the largest decrease in lactose and the largest increase in lactic acid occurred between salting and d 1 of ripening. It was interesting to observe that although the lactose content in cheese was influenced by several factors (Ca and P, residual lactose, and S/M), the concentration of lactic acid was influenced only by S/M. More lactic acid was produced in low S/M treatments compared with high S/M treatments. Although surprising for Cheddar cheese, a substantial amount (0.2 to 0.4%) of galactose was observed throughout ripening in all treatments. Minor changes in the levels of citric, uric, butyric, and propanoic acids were observed during early ripening, whereas during later ripening, a substantial increase was observed. A gradual decrease in orotic acid and a gradual increase in pyruvic acid content of the cheeses were observed during 12 mo of ripening. In contrast, acetic acid did not show a particular trend, indicating its role as an intermediate in a biochemical pathway, rather than a final product.     

Effect of different curd-washing methods on the insoluble Ca content and rheological properties of Colby cheese during ripening

A curd-washing step is used in the manufacture of Colby cheese to decrease the residual lactose content and, thereby, decrease the potential formation of excessive levels of lactic acid. The objective of this study was to investigate the effect of different washing methods on the Ca equilibrium and rheological properties of Colby cheese. Four different methods of curd-washing were performed. One method was batch washing (BW), where cold water (10°C) was added to the vat, with and without stirring, where curds were in contact with cold water for 5 min. The other method used was continuous washing (CW), with or without stirring, where curds were rinsed with continuously running cold water for approximately 7 min and water was allowed to drain immediately. Both methods used a similar volume of water. The manufacturing pH values were similar in all 4 treatments. The insoluble (INSOL) Ca content of cheese was measured by juice and acid-base titration methods and the rheological properties were measured by small amplitude oscillatory rheology. The levels of lactose in cheese at 1 d were significantly higher in CW cheese (0.06-0.11%) than in BW cheeses (∼0.02%). The levels of lactic acid at 2 and 12 wk were significantly higher in CW cheese than in BW cheeses. No differences in the total Ca content of cheeses were found. Cheese pH increased during ripening from approximately 5.1 to approximately 5.4. A decrease in INSOL Ca content of all cheeses during ripening occurred, although a steady increase in pH took place. The initial INSOL Ca content as a percent of total Ca in cheese ranged from 75 to 78% in all cheeses. The INSOL Ca content of cheese was significantly affected by washing method. Stirring during manufacturing did not have a significant effect on the INSOL Ca content of cheese during ripening. Batch-washed cheeses had significantly higher INSOL Ca contents than did CW cheeses during the first 4 wk of ripening. The maximum loss tangent values (meltability index) of CW cheese at 1 d and 1 wk were significantly higher compared with those of BW cheeses. In conclusion, different curd washing methods have a significant effect on the levels of lactose, lactic acid, meltability, and INSOL Ca content of Colby cheese during ripening.     

Metabolomics-based component profiling of hard and semi-hard natural cheeses with gas chromatography/time-of-flight-mass spectrometry, and its application to sensory predictive modeling

Gas chromatography/time-of-flight mass spectrometry (GC/TOF-MS) was used to analyze hydrophilic low molecular weight components, including amino acids, fatty acids, amines, organic acids, and saccharides, in cheese, and the sensometric application for practical metabolomic studies in the food industry is described. Derivatization of target analytes was conducted prior to the GC/TOF-MS analysis. Data on 13 cheeses, six Cheddar cheeses, six Gouda cheeses and one Parmigiano-Reggiano cheese, were analyzed by multivariate analysis. The uniqueness of the Parmigiano-Reggiano cheese metabolome was revealed. Principal component analysis (PCA) showed no grouping of the Cheddar cheeses and Gouda cheeses according to production method or country of origin. The PCA loading plot confirms that many amino acids contribute positively to PC1, suggesting that PC1 is closely related to degradation of proteins, and that lactic acid contributed positively to PC2, whereas glycerol contributed negatively to PC2, suggesting that factors regarding degradation of carbohydrates and fats were expressed in PC2. Partial least squares (PLS) regression models were constructed to predict the relationship between the metabolite profile and two sensory attributes, "Rich flavor" and "Sour flavor", which were related to maturation. The compounds that play an important role in constructing each sensory prediction model were identified as 12 amino acids and lactose for "Rich flavor", and 4-aminobutyric acid, ornithine, succinic acid, lactic acid, proline and lactose for "Sour flavor". The present study revealed that metabolomics-based component profiling, focusing on hydrophilic low molecular weight components, was able to predict the sensory characteristics related to ripening.     

乳清添加对马苏里拉奶酪成熟过程中风味物质及其品质的影响

该研究以未添加乳清的马苏里拉奶酪为对照,考察乳清对马苏里拉奶酪成熟期内（0 d、30 d、60 d、90 d）乳酸菌活菌数、油脂析出性、挥发性风味物质及氨基酸含量的影响,并对挥发性风味物质与氨基酸进行相关性分析。结果表明,在奶酪成熟期内,两种奶酪的活菌数均呈先增加后减少的趋势,油脂析出性均增加,且乳清奶酪均高于对照奶酪;两种奶酪的挥发性风味物质存在差异,从2种奶酪中共检测到61种挥发性风味物质,其中对照奶酪中共检出43种,乳清奶酪中共检出55种。乳清奶酪中的醇、酸、醛、酮、酯类物质的含量及种类均高于对照。两种奶酪成熟期间均分别检测到15种游离氨基酸,乳清奶酪成熟90 d时的氨基酸含量（848.92 mg/kg）高于对照奶酪（663.44 mg/kg）。除精氨酸、丝氨酸、酪氨酸、天冬氨酸外,其余氨基酸对20种挥发性风味物质具有积极作用。综上,乳清添加可提升马苏里拉奶酪的风味。     

驼乳干酪的工艺优化及成熟期间的理化特性

研究了驼乳干酪最佳加工工艺及成熟期间理化和微生物指标的变化。确定了驼乳干酪的最佳工艺参数:发酵剂的添加量为0.006%,CaC12的添加量为0.03 g/L,pH值为6.1,凝乳酶的添加量为0.06 g/L,凝乳温度为35℃。驼乳干酪的干物质质量分数约为45%,随成熟时间的延长,驼乳干酪的蛋白质、脂肪、乳糖、水分,质量分数下降;硬度、咀嚼性升高,但黏着性和弹性降低;pH4.6-SN的质量分数、12%TCA-SN和5%PTA-SN的质量分数都有不同程度的上升;发酵剂乳酸菌数在逐渐降低,非发酵剂活菌数却在逐渐增高。     

A model describing Debaryomyces hansenii growth and substrate consumption during a smear soft cheese deacidification and ripening

A mechanistic model for Debaryomyces hansenii growth and substrate consumption, lactose conversion into lactate by lactic acid bacteria, as well as lactose and lactate transfer from the core toward the rind was established. The model described the first step (14 d) of the ripening of a smear soft cheese and included the effects of temperature and relative humidity of the ripening chamber on the kinetic parameters. Experimental data were collected from experiments carried out in an aseptic pilot scale ripening chamber under 9 different combinations of temperature (8, 12, and 16°C) and relative humidity (85, 93, and 99%) according to a complete experimental design. The model considered the cheese as a system with 2 compartments (rind and core) and included 5 state evolution equations and 16 parameters. The model succeeded in predicting D. hansenii growth and lactose and lactate concentrations during the first step of ripening (curd deacidification) in core and rind. The nonlinear data-fitting method allowed the determination of tight confidence intervals for the model parameters. The residual standard error (RSE) between model predictions and experimental data was close to the experimental standard deviation between repeated experiments.     

Proteolysis, lipolysis, volatile compounds, texture, and flavor of Hispánico cheese made using frozen ewe milk curds pressed for different times

Hispánico cheese is manufactured in Spain from a mixture of cow and ewe milk. Production of ewe milk varies throughout the year, with a peak in spring and a valley in summer and autumn. To overcome this seasonal shortage, curd from spring ewe milk may be frozen and used for cheese manufacture some months later. In the present work, ewe milk curds pressed for 15, 60, or 120 min were held at −24°C for 4 mo, thawed, cut to 1-mm pieces, and mixed with fresh cow milk curd for the manufacture of experimental Hispánico cheeses. Control cheese was made from a mixture of pasteurized cow and ewe milk in the same (80:20) proportion. Cheeses, made in duplicate experiments, were analyzed throughout a 60-d ripening period. No significant differences between cheeses were found for lactic acid bacteria counts, dry matter content, hydrophilic peptides, 47 out of 68 vol.tile compounds, texture, and flavor characteristics. On the other hand, differences of minor practical significance between experimental and control cheeses, unrelated to the use of frozen ewe milk curd or the pressing time of ewe milk curd, were found for pH value, aminopeptidase activity, proteolysis, hydrophobic peptides, free amino acids, free fatty acids, and the remaining 21 vol.tile compounds. It may be concluded that the use of frozen ewe milk curd in the manufacture of Hispánico cheese does not alter its main characteristics.     

Probiotic cheese production using Lactobacillus casei cells immobilized on fruit pieces

Lactobacillus casei cells were immobilized on fruit (apple and pear) pieces and the immobilized biocatalysts were used separately as adjuncts in probiotic cheese making. In parallel, cheese with free L. casei cells and cheese only from renneted milk were prepared. The produced cheeses were ripened at 4 to 6°C and the effect of salting and ripening time on lactose, lactic acid, ethanol concentration, pH, and lactic acid bacteria viable counts were investigated. Fat, protein, and moisture contents were in the range of usual levels of commercial cheeses. Reactivation in whey of L. casei cells immobilized on fruit pieces after 7 mo of ripening showed a higher rate of pH decrease and lower final pH value compared with reactivation of samples withdrawn from the remaining mass of the cheese without fruit pieces, from cheese with free L. casei, and rennet cheese. Preliminary sensory evaluation revealed the fruity taste of the cheeses containing immobilized L. casei cells on fruit pieces. Commercial Feta cheese was characterized by a more sour taste, whereas no significant differences concerning cheese flavor were reported by the panel between cheese containing free L. casei and rennet cheese. Salted cheeses scored similar values to commercial Feta cheese, whereas unsalted cheese scores were significantly lower, but still acceptable to the sensory panelists.     

The role of autolysis of lactic acid bacteria in the ripening of cheese

The importance of autolysis of lactic acid bacteria in cheese ripening is evident from the literature. However, the mechanisms and the consequences still require investigation. The consequences of autolysis of mesophilic starters in Cheddar cheese are discussed and highlights from current physiological and genetic studies on starter autolysis are presented. The relative merits of measuring starter autolysis in cheese by viable starter cell densities, electron microscopic observations and assay of cell-free cytoplasmic enzymes are discussed for cheese studies using different starter strains and added phage to achieve different levels of autolysis. The balance of both the intact and autolysed starter cells in young curd appear to be important in cheese ripening. The intact cells are necessary for physiological reactions such as lactose fermentation and oxygen removal and possibly for a number of flavour reactions. In contrast, the main consequence of autolysed cells in cheese is to accelerate the peptidolytic reactions. The possible influences of autolysis of adventitious lactic acid bacteria during cheese ripening are discussed.     

Effect of yeast and bacterial adjuncts on the CLA content and flavour of a washed-curd,dry-salted cheese

Three strains of Propionibacterium freudenreichii ssp. shermanii that converted free linoleic acid to conjugated linoleic acid (CLA) in laboratory media were used as adjunct strains, together with strains of Geotrichum candidum and Yarrowia lipolytica, to make a dry-salted, washed-curd cheese. Lactobacillus fermentum was included to produce ethanol (from lactose), a potential substrate for ethyl ester synthesis, while Lactobacillus rhamnosus was used to control the adventitious non-starter lactic acid bacteria population. The total (esterified plus free) level of CLA was similar in the control and experimental cheeses and remained unchanged over 4 months of ripening. Addition of linoleic acid-rich safflower oil to the cheese curd increased the concentration of free linoleic acid generated in the cheese but the CLA content did not change. Free linoleic acid was released by the yeast lipase(s) but there was no conversion to CLA. High concentrations of ethyl esters were produced in the cheeses made with added yeast, giving a fruity flavour.     

Influence of lamb rennet paste containing probiotic on proteolysis and rheological properties of pecorino cheese

Pecorino cheeses made from heat-treated ewes’ milk using traditional lamb rennet paste (RP), lamb rennet paste containing Lactobacillus acidophilus (LA-5; RPL), and lamb rennet paste containing a mix of Bifidobacterium lactis (BB-12) and Bifidobacterium longum (BB-46; RPB) were characterized for proteolytic and rheological features during ripening. Consumer acceptance of cheeses at 60 d of ripening was evaluated. Lactobacillus acidophilus and Bifidobacterium mix displayed counts of 8 log₁₀ cfu/g and 9 log₁₀ cfu/g, respectively, in cheese during ripening. The RPB cheese displayed a greater degradation of casein (CN) matrix carried out by the enzymes associated to both Bifidobacterium mix and endogenous lactic acid microflora, resulting in the highest values of non-CN N and water-soluble N and the highest amount of α_s-CN degradation products in cheese at 60 d of ripening. The RPL cheese displayed intermediate levels of lactic acid bacteria and of N fractions. The percentage of γ-CN in RP and RPL cheeses at 60 d was 2-fold higher than in the cheese curd of the same groups, whereas the mentioned parameter was 3-fold higher in RPB cheese than in the corresponding fresh curd according to its highest plasmin content. The lower hardness in RPB at the end of ripening could be ascribed to the greater proteolysis observed in cheese harboring the Bifidobacterium mix. Although differences in proteolytic patterns were found among treatments, there were no differences in smell and taste scores.     

Microbial dynamics during the ripening of a mixed cow and goat milk cheese manufactured using frozen goat milk curd

To overcome the seasonal shortage of goat milk in mixed milk cheese manufacture, pasteurized goat milk curd and high-pressure-treated raw goat milk curd manufactured in the spring were held at −24°C for 4 mo, thawed, and mixed with fresh cow milk curd for the manufacture of experimental cheeses. Control cheeses were made from a mixture of pasteurized cow and goat milk. The microbiota of experimental and control cheeses was studied using culture-dependent and culture-independent techniques. Bacterial enumeration by classical methods showed lactic acid bacteria to be the dominant population in both control and experimental cheeses. In total, 681 isolates were grouped by partial amplified rDNA restriction analysis (ARDRA) into 4 groups and identified by 16S rRNA gene sequencing as Lactococcus lactis ssp. lactis (563 isolates), Leuconostoc pseudomesenteroides (72 isolates), Lactobacillus spp. (34 isolates), and Lc. lactis ssp. cremoris (12 isolates). Temporal temperature gradient gel electrophoresis (TTGE) analysis of cheese showed (1) the predominance of Lc. lactis in all cheeses; (2) the presence of Leu. pseudomesenteroides population in all cheeses from d 15 onward; (3) the presence of a Lactobacillus plantarum population in control cheese until d 15 and in experimental cheeses throughout the ripening period. Due to the most diverse and complete set of peptidases present in the genus Lactobacillus, the prevalence of this population in experimental cheeses could give rise to differences in cheese flavor between experimental and control cheeses.