交流励磁变速恒频风力发电系统控制策略研究

本文分析了风力机传动系统动态特性和机电能量转换与传递原理，介绍了交流励磁变速恒频风力发电系统低风速时的转速控制策略和高风速时的功率控制策略，建立了直接转速控制策略和扰动调节控制策略的线性化数学模型，实验结果验证了数学模型的有效性。     

Investigation of wind turbine wake superposition models using Reynolds‐averaged Navier‐Stokes simulations

It is well accepted that the wakes created by upstream turbines significantly impact on the power production and fatigue loading of downstream turbines and that this phenomenon affects wind farm performance. Improving the understanding of wake effects and overall efficiency is critical for the optimisation of layout and operation of increasingly large wind farms. In the present work, the NREL 5‐MW reference turbine was simulated using blade element embedded Reynolds‐averaged Navier‐Stokes computations in sheared onset flow at three spatial configurations of two turbines at and above rated flow speed to evaluate the effects of wakes on turbine performance and subsequent wake development. Wake recovery downstream of the rearward turbine was enhanced due to the increased turbulence intensity in the wake, although in cases where the downstream turbine was laterally offset from the upstream turbine this resulted in relatively slower recovery. Three widely used wake superposition models were evaluated and compared with the simulated flow‐field data. It was found that when the freestream hub‐height flow speed was at the rated flow speed, the best performing wake superposition model varied depending according to the turbine array layout. However, above rated flow speed where the wake recovery distance is reduced, it was found that linear superposition of single turbine velocity deficits was the best performing model for all three spatial layouts studied.     

The statistical smoothing of power delivered to utilities bymultiple wind turbines

A relationship for estimating the spectrum of the power delivered from multiple wind turbines from the spectrum of the power delivered by a single wind turbine is derived. It is assumed in the derivation that the wind power time series of each wind turbine is stationary and can be related to time series or neighboring wind turbines by a spatial coherence function. The multiple wind turbine power spectra is derived for two cases: operation at rated power and operation at below rated power. The theoretical results are compared with measurement data, showing excellent agreement     

具有失速调节的变转速风力机的动态分析与控制策略

失速调节变车风力机是非线性而且在额定风速以上不稳定的系统,风力机的跟踪控制又是分段实现的,研究其动态特性和控制策略对风力机的稳定性和可靠性尤其重要,从风力机的动力关系出发,分析了风力机在额定风速上下的运行特性,确定了相应的跟踪控制方案,并对试验风力机进行控制设计,给出了不同方案的计算机仿真结果及比较分析。     

Model predictive control of a wind turbine using short‐term wind field predictions

As wind turbines become larger and hence more flexible, the design of advanced controllers to mitigate fatigue damage and optimise power capture is becoming increasingly important. The majority of the existing literature focuses on feedback controllers that use measurements from the turbine itself and possibly an estimate or measurement of the current local wind profile. This work investigates a predictive controller that can use short‐term predictions about the approaching wind field to improve performance by compensating for measurement and actuation delays. Simulations are carried out using the FAST aeroelastic design code modelling the NREL 5 MW reference turbine, and controllers are designed for both above rated and below rated wind conditions using model predictive control. Tests are conducted in various wind conditions and with different future wind information available. It is shown that in above rated wind conditions, significant fatigue load reductions are possible compared with a controller that knows only the current wind profile. However, this is very much dependent on the speed of the pitch actuator response and the wind conditions. In below rated wind conditions, the goals of power capture and fatigue load control were considered separately. It was found that power capture could only be improved using wind predictions if the wind speed changed rapidly during the simulation and that fatigue loads were not consistently reduced when wind predictions were available, indicating that wind predictions are of limited benefit in below rated wind conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

风力发电液力机械调速装置系统动态特性研究

为实现2 MW风电机组的高效传动,通过实验方法测得导叶可调式双涡轮液力变矩器输出特性曲线,计算得到不同开度下涡轮力矩与涡轮转速的三次项系数关系式,推导风力发电液力调速系统行星轮系的数学模型,设计了模糊自整定PID控制器的控制系统,并对风电机组进行了动态仿真和实验对比研究。结果表明:数值计算功率数值均大于实验值,风速小于5 m/s时绝对误差较小,风速大于5 m/s时进入正常发电工况,最大误差为7%。     

Fault ride-through capability of DFIG wind turbines

This paper concentrates on the fault ride-through capability of doubly fed induction generator (DFIG) wind turbines. The main attention in the paper is, therefore, drawn to the control of the DFIG wind turbine and of its power converter and to the ability to protect itself without disconnection during grid faults. The paper provides also an overview on the interaction between variable-speed DFIG wind turbines and the power system subjected to disturbances, such as short circuit faults. The dynamic model of DFIG wind turbine includes models for both mechanical components as well as for all electrical components, controllers and for the protection device of DFIG necessary during grid faults. The viewpoint of the paper is to carry out different simulations to provide insight and understanding of the grid fault impact on both DFIG wind turbines and on the power system itself. The dynamic behaviour of DFIG wind turbines during grid faults is simulated and assessed by using a transmission power system generic model developed and delivered by the Danish Transmission System Operator Energinet.dk in the power system simulation toolbox PowerFactory DIgSILENT. The data for the wind turbines are not linked to a specific manufacturer, but are representative for the turbine and generator type used in variable-speed DFIG wind turbines with pitch control.     

Dynamic models of wind farms with fixed speed wind turbines

The increasing wind power penetration on power systems requires the development of adequate wind farms models for representing the dynamic behaviour of wind farms on power systems. The behaviour of a wind farm can be represented by a detailed model including the modelling of all wind turbines and the wind farm electrical network. But this detailed model presents a high order model if a wind farm with high number of wind turbines is modelled and therefore the simulation time is long. The development of equivalent wind farm models enables the model order and the computation time to be reduced when the impact of wind farms on power systems is studied. In this paper, equivalent models of wind farms with fixed speed wind turbines are proposed by aggregating wind turbines into an equivalent wind turbine that operates on an equivalent wind farm electrical network. Two equivalent wind turbines have been developed: one for aggregated wind turbines with similar winds, and another for aggregated wind turbines under any incoming wind, even with different incoming winds.The proposed equivalent models provide high accuracy for representing the dynamic response of wind farm on power system simulations with an important reduction of model order and simulation time compare to that of the complete wind farm modelled by the detailed model.     

Flicker study on variable speed wind turbines with doubly fed induction generators

Grid connected wind turbines may produce flicker during continuous operation. This paper presents a simulation model of a MW-level variable speed wind turbine with a doubly fed induction generator developed in the simulation tool of PSCAD/EMTDC. Flicker emission of variable speed wind turbines with doubly fed induction generators is investigated during continuous operation, and the dependence of flicker emission on mean wind speed, wind turbulence intensity, short circuit capacity of grid and grid impedance angle are analyzed. A comparison is done with the fixed speed wind turbine, which leads to a conclusion that the factors mentioned above have different influences on flicker emission compared with that in the case of the fixed speed wind turbine. Flicker mitigation is realized by output reactive power control of the variable speed wind turbine with doubly fed induction generator. Simulation results show the wind turbine output reactive power control provides an effective means for flicker mitigation regardless of mean wind speed, turbulence intensity and short circuit capacity ratio.     

Development of a comprehensive MPPT for grid‐connected wind turbine driven PMSG

This paper proposes a comprehensive MPPT method by which extraction of maximum power from wind turbine and its subsequent transfer through various power stages and final delivery to the connected grid are realized. In the proposed system, the operation of the wind turbine at its maximum efficiency point is maintained by control of grid‐tied inverter such that the shaft speed of the generator is set to result the desired optimum tip speed ratio of the turbine. The proposed comprehensive MPPT estimates the required DC link voltage for each wind speed using a unified system model, uses a loss factor to account for the system losses, and then controls the inverter to push the WT extracted maximum power into the grid. The comprehensive MPPT is developed and is validated in MATLAB/Simulink platform in a wide range of operating wind speed. The results ascertain that the wind turbine is made to operate at its maximum efficiency point for all wind speeds below the rated one.     

Large‐eddy simulations with extremum‐seeking control for individual wind turbine power optimization

Large‐eddy simulations of the flow past an array of three aligned turbines have been performed. The study is focused on below rated (Region 2) wind speeds. The turbines are controlled through the generator torque gain, as usually done in Region 2. Two operating strategies are considered: (i) preset individual optimum torque gain based on a model for the power coefficient (baseline case) and (ii) real‐time optimization of torque gain for maximizing each individual turbine power capture during operation. The real‐time optimization is carried out through a model‐free approach, namely, extremum‐seeking control. It is shown that ESC is capable of increasing the power production of the array by 6.5% relative to the baseline case. The extremum‐seeking control reduces the torque gain of the downstream turbines, thus increasing the angular speed of the blades. This results in improved aerodynamics near the tip of the blade that is the portion contributing mostly to the torque and power. In addition, an increase in angular speed leads to a larger entrainment in the wake, which also contributes to provide additional available power downstream. It is also shown that the tip speed ratio may not be a reliable performance indicator when the turbines are in waked conditions. This may be a concern when using optimal parameter settings, determined from isolated turbine models, in applications with waked turbines. Copyright © 2017 John Wiley & Sons, Ltd.     

Dynamic wind turbine output power reduction under varying wind speed conditions due to inertia

The inertia of wind turbines causes a reduction in their output power due to their inability to operate at the turbine maximum co‐efficient of performance point under dynamic wind conditions. In this paper, this dynamic power reduction is studied analytically and using simulations, assuming that a steady‐state optimal torque control strategy is used. The concepts of the natural and actual turbine time‐constant are introduced, and typical values for these parameters are examined. It is shown that for the typical turbine co‐efficient of performance curve used, the average turbine speed can be assumed to be determined by the average wind speed. With this assumption, analytical expressions for the power reduction with infinite and then finite turbine inertia are determined for sine‐wave wind speed variations. The results are then generalized for arbitrary wind speed profiles. A numerical wind turbine system simulation model is used to validate the analytical results for step and sine‐wave wind speed variations. Finally, it is used with real wind speed data to compare with the analytical predictions. Copyright © 2012 John Wiley & Sons, Ltd.     

The Design of closed loop controllers for wind turbines

This article reviews the design of algorithms for wind turbine pitch control and also for generator torque control in the case of variable speed turbines. Some recent and possible future developments are discussed. Although pitch control is used primarily to limit power in high winds, it also has a significant effect on various loads. Particularly as turbines become larger, there is increasing interest in designing controllers to mitigate loads as far as possible. Torque control in variable speed turbines is used primarily to maximize energy capture below rated wind speed and to limit the torque above rated. Once again there are opportunities for designing these controllers so as to mitigate certain loads. In addition to improving the design of the control algorithms, it is also possible to use additional sensors to help the controller to achieve its objectives more effectively. The use of additional actuators in the form of individual pitch controllers for each blade is also discussed. It is important to be able to quantify the benefits of any new controller. Although computer simulations are useful, field trials are also vital. The variability of the real wind means that particular care is needed in the design of the trials. Copyright © 2001 John Wiley & Sons, Ltd.     

A frequency domain approach to wind turbines for flicker analysis

Wind turbines may have an important impact on power quality. Flicker is a more serious issue for fixed-speed wind turbines because these turbines produce electric power following the variations of the incident wind. During continuous operation, wind variations will result in power fluctuations and consequently in voltage fluctuations. It is necessary to evaluate wind turbines flicker emission level, and traditionally time domain simulations have been used to perform the analysis. This paper presents a complete frequency domain model to study flicker produced during wind turbines continuous operation. The model includes a realistic wind speed model as observed by the wind turbine and also a frequency domain induction generator model is presented. The frequency domain model has been compared with a time domain model. The frequency domain approach, as shown in the paper, may be very useful for flicker analysis in electric networks.     

Wind turbine aerodynamic response under atmospheric icing conditions

This article deals with the atmospheric ice accumulation on wind turbine blades and its effect on the aerodynamic performance and structural response. The role of eight atmospheric and system parameters on the ice accretion profiles was estimated using the 2D ice accumulation software lewice Twenty‐four hours of icing, with time varying wind speed and atmospheric icing conditions, was simulated on a rotor. Computational fluid dynamics code, FLUENT, was used to estimate the aerodynamic coefficients of the blade after icing. The results were also validated against wind tunnel measurements performed at LM Wind Power using a NACA64618 airfoil. The effects of changes in geometry and surface roughness are considered in the simulation. A blade element momentum code WT‐Perf is then used to quantify the degradation in performance curves. The dynamic responses of the wind turbine under normal and iced conditions were simulated with the wind turbine aeroelastic code HAWC2. The results show different behaviors below and above rated wind speeds. In below rated wind speed, for a 5 MW virtual NREL wind turbine, power loss up to 35% is observed, and the rated power is shifted from wind speed of 11 to 19 m s^?1. However, the thrust of the iced rotor in below rated wind speed is smaller than the clean rotor up to 14%, but after rated wind speed, it is up to 40% bigger than the clean rotor. Finally, it is briefly indicated how the results of this paper can be used for condition monitoring and ice detection. Copyright © 2012 John Wiley & Sons, Ltd.     

Wind energy conversion with a variable-ratio gearbox: design and analysis

Variable-speed wind turbines are able to adapt to low wind speeds and therefore have greater efficiency than fixed-speed turbines during partial-load operation. Unfortunately, the high cost and low reliability of the electronics that enable variation in speed have discouraged this mode of operation for distributed wind turbines. Alternatively, a Variable-Ratio Gearbox (VRG) can be integrated into the fixed-speed wind turbine to facilitate operation with a discrete set of variable speeds that boost efficiency. The VRG concept is based upon mature technology taken from the automotive industry and is characterized by low cost and high reliability. In this paper, a model-based design methodology is introduced to study the performance gain of integrating a VRG into a fixed-speed stall-regulated wind turbine system. The results demonstrate how this device can improve the efficiency of the fixed-speed turbine in the partial-load region and the potential to use the VRG to limit power in the full-load region where pitch control is often used.     

Dynamic modelling and control of fully rated converter wind turbines

Today, many countries are integrating large amount of wind energy into the grid and many more are expected to follow. The expected increase of wind energy integration is therefore a concern particularly to transmission grid operators. Based on the past experience, some of the relevant concerns when connecting significant amount of wind energy into the existing grid are: fault ride through requirement to keep wind turbines on the grid during faults and wind turbines have to provide ancillary services like voltage and frequency control with particular regard to island operation.While there are still a number of wind turbines based on fixed speed induction generators (FSIG) currently running, majority of wind turbines that are planned to be erected are of variable speed configurations. The reason for this is that FSIG are not capable of addressing the concern mentioned above. Thus, existing researches in wind turbines are now widely directed into variable speed configurations. This is because apart from optimum energy capture and reduction of mechanical stress, preference of these types is also due to the fact that it can support the network such as its reactive power and frequency regulation. Variable wind turbines are doubly fed induction generator wind turbines and full converters wind turbines which are based on synchronous or induction generators.This paper describes the steady state and dynamic models and control strategies of wind turbine generators. The dynamic models are presented in the dq frame of reference. Different control strategies in the generator side converter and in the grid side converter for fault ride through requirement and active power/frequency and reactive/voltage control are presented for variable speed wind turbines.     

Providing power reserve for secondary grid frequency regulation of offshore wind farms through yaw control

The ability to significantly contribute to the frequency regulation and provide valuable ancillary services to the transmission system operator (TSO) is one of the present wind farm (WF) challenges, due to the limitations of wind speed forecasting and insufficient power reserve in certain operating conditions notably. In this work, the feasibility of WFs to participate in frequency restoration reserve (FRR) through yaw control is assessed. To this end, a distributed yaw optimization method is developed to evaluate the power gain achieved by yaw redirection based on wind turbine cooperation and compared with a greedy approach. The method relies on a static wake model whose parameters are estimated in a systematic way from simulation data generated with FAST.Farm. Through a case study based on a scaled version of the Belgian Mermaid offshore WF, it is demonstrated that the requirements of the TSO are fulfilled both in terms of response time and level of power reserve for most wind directions. The assessment is limited to wind speeds below the rated speed of the considered wind turbines.