Stretched tissue mounting for MALDI mass spectrometry imaging

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry imaging (MSI) combines information-rich chemical detection with spatial localization of analytes. For a given instrumental platform and analyte class, the data acquired can represent a compromise between analyte extraction and spatial information. Here, we introduce an improvement to the spatial resolution achievable with MALDI MSI conducted with standard mass spectrometric systems that also reduces analyte migration during matrix application. Tissue is placed directly on a stretchable membrane that, when stretched, fragments the tissue into micrometer-sized pieces. Scanning electron microscopy analysis shows that this process produces fairly homogeneous distributions of small tissue fragments separated and surrounded by areas of hydrophobic membrane surface. MALDI matrix is then applied by either a robotic microspotter or an artist's airbrush. Rat spinal cord samples imaged with an instrumental resolution of 50-250 μm demonstrate lipid distributions with a 5-fold high spatial resolution (a 25-fold increase in pixel density) after stretching compared to tissues that were not stretched.     

An analytical pipeline for MALDI in-source decay mass spectrometry imaging

In-source decay (ISD) fragmentation as combined with matrix-assisted laser desorption/ionization (MALDI) mass spectrometry allows protein sequencing directly from mass spectra. Acquisition of MALDI-ISD mass spectra from tissue samples is achieved using an appropriate MALDI matrix, such as 1,5-diaminonaphthalene (DAN). Recent efforts have focused on combining MALDI-ISD with mass spectrometry imaging (MSI) to provide simultaneous sequencing and localization of proteins over a thin tissue surface. Successfully coupling these approaches requires the development of new data analysis tools, but first, investigating the properties of MALDI-ISD as applied to mixtures of protein standards reveals a high sensitivity to the relative protein ionization efficiency. This finding translates to the protein mixtures found in tissues and is used to inform the development of an analytical pipeline for data analysis in MALDI-ISD MS imaging, including software to identify the most pertinent spectra, to sequence protein mixtures, and to generate ion images for comparison with tissue morphology. The ability to simultaneously identify and localize proteins is demonstrated by using the analytical pipeline on three tissue sections from porcine eye lens, resulting in localizations for crystallins and cytochrome c. The variety of protein identifications provided by MALDI-ISD-MSI between tissue sections creates a discovery tool, and the analytical pipeline makes this process more efficient.     

Quantitative tandem mass spectrometric imaging of endogenous acetyl-L-carnitine from piglet brain tissue using an internal standard

Matrix-assisted laser desorption/ionization (MALDI) based mass spectrometric imaging (MSI) is increasingly being used as an analytical tool to evaluate the molecular makeup of tissue samples. From the direct analysis of a tissue section, the physical integrity of sample is preserved; thus, spatial information of a compound's distribution may be determined. One limitation of the technique, however, has been the inability to determine the absolute concentration from a tissue sample. Here we report the development of a quantitative MSI technique in which the distribution of acetyl-L-carnitine (AC) in a piglet brain sample is quantified with MALDI MSI. An isotopically labeled internal standard was applied uniformly beneath the tissue section, and wide-isolation tandem mass spectrometry was performed. Normalizing the analyte ion signal by the internal standard ion signal resulted in significant improvements in MS images, signal reproducibility, and calibration curve linearity. From the improved MS images, the concentration of AC was determined and plotted producing a concentration-scaled image of the distribution of AC in the piglet brain section.     

Qualitative and quantitative MALDI imaging of the positron emission tomography ligands raclopride (a D2 dopamine antagonist) and SCH 23390 (a D1 dopamine antagonist) in rat brain tissue sections using a solvent-free dry matrix application method

The distributions of positron emission tomography (PET) ligands in rat brain tissue sections were analyzed by matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI MSI). The detection of the PET ligands was possible following the use of a solvent-free dry MALDI matrix application method employing finely ground dry α-cyano-4-hydroxycinnamic acid (CHCA). The D2 dopamine receptor antagonist 3,5-dichloro-N-{[(2S)-1-ethylpyrrolidin-2-yl]methyl}-2-hydroxy-6-methoxybenzamide (raclopride) and the D1 dopamine receptor antagonist 7-chloro-3-methyl-1-phenyl-1,2,4,5-tetrahydro-3-benzazepin-8-ol (SCH 23390) were both detected at decreasing abundance at increasing period postdosing. Confirmation of the compound identifications and distributions was achieved by a combination of mass-to-charge ratio accurate mass, isotope distribution, and MS/MS fragmentation imaging directly from tissue sections (performed using MALDI TOF/TOF, MALDI q-TOF, and 12T MALDI-FT-ICR mass spectrometers). Quantitative data was obtained by comparing signal abundances from tissues to those obtained from quantitation control spots of the target compound applied to adjacent vehicle control tissue sections (analyzed during the same experiment). Following a single intravenous dose of raclopride (7.5 mg/kg), an average tissue concentration of approximately 60 nM was detected compared to 15 nM when the drug was dosed at 2 mg/kg, indicating a linear response between dose and detected abundance. SCH 23390 was established to have an average tissue concentration of approximately 15 μM following a single intravenous dose at 5 mg/kg. Both target compounds were also detected in kidney tissue sections when employing the same MSI methodology. This study illustrates that a MSI may well be readily applied to PET ligand research development when using a solvent-free dry matrix coating.     

Robust data processing and normalization strategy for MALDI mass spectrometric imaging

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry imaging (MSI) provides localized information about the molecular content of a tissue sample. To derive reliable conclusions from MSI data, it is necessary to implement appropriate processing steps in order to compare peak intensities across the different pixels comprising the image. Here, we review commonly used normalization methods, and propose a rational data processing strategy, for robust evaluation and modeling of MSI data. The approach includes newly developed heuristic methods for selecting biologically relevant peaks and pixels to reduce the size of a data set and remove the influence of the applied MALDI matrix. The methods are demonstrated on a MALDI MSI data set of a sagittal section of rat brain (4750 bins, m/z = 50-1000, 111 × 185 pixels) and the proposed preferred normalization method uses the median intensity of selected peaks, which were determined to be independent of the MALDI matrix. This was found to effectively compensate for a range of known limitations associated with the MALDI process and irregularities in MS image sampling routines. This new approach is relevant for processing of all MALDI MSI data sets, and thus likely to have impact in biomarker profiling, preclinical drug distribution studies, and studies addressing underlying molecular mechanisms of tissue pathology.     

Nanoparticle-assisted laser desorption/ionization based mass imaging with cellular resolution

Today, two-dimensional mass spectrometry analysis of biological tissues by means of a technique called mass imaging, mass spectrometry imaging (MSI), or imaging mass spectrometry (IMS) has found application in investigating the distribution of moleculesMSI with matrix-assisted laser desorption/ionization (MALDI) and secondary ion MS (SIMS). However, the size of the matrix crystal and the migration of analytes can decrease the spatial resolution in MALDI, and SIMS can only ionize compounds with relatively low molecular weights. To overcome these problems, we developed a nanoparticle-assisted laser desorption/ionization (nano-PALDI)-based MSI. We used nano-PALDI MSI to visualize lipids and peptides at a resolution of 15 microm in mammalian tissues.     

Infrared laser ablation sample transfer for MALDI imaging

An infrared laser was used to ablate material from tissue sections under ambient conditions for direct collection on a matrix assisted laser desorption ionization (MALDI) target. A 10 μm thick tissue sample was placed on a microscope slide and was mounted tissue-side down between 70 and 450 μm from a second microscope slide. The two slides were mounted on a translation stage, and the tissue was scanned in two dimensions under a focused mid-infrared (IR) laser beam to transfer material to the target slide via ablation. After the material was transferred to the target slide, it was analyzed using MALDI imaging using a tandem time-of-flight mass spectrometer. Images were obtained from peptide standards for initial optimization of the system and from mouse brain tissue sections using deposition either onto a matrix precoated target or with matrix addition after sample transfer and compared with those from standard MALDI mass spectrometry imaging. The spatial resolution of the transferred material is approximately 400 μm. Laser ablation sample transfer provides several new capabilities not possible with conventional MALDI imaging including (1) ambient sampling for MALDI imaging, (2) area to spot concentration of ablated material, (3) collection of material for multiple imaging analyses, and (4) direct collection onto nanostructure assisted laser desorption ionization (NALDI) targets without blotting or ultrathin sections.     

Matrix solution fixation: histology-compatible tissue preparation for MALDI mass spectrometry imaging

Mass spectrometry imaging (MSI) acquires a grid of spatially resolved mass spectra and provides a molecular landscape of a tissue. This can have a myriad of uses: from basic tissue characterization to a comprehensive pathological diagnosis. We have developed a fast, inexpensive, histology-compatible tissue preparation method for matrix-assisted laser desorption/ionization (MALDI)-MSI, which overcomes current sample preparation-imposed limitations in image resolution. Tissue sections are prepared via simultaneous fixation and matrix deposition. This is accomplished by incorporating the MALDI matrix into solvents that preserve tissue integrity when applied according to standard histology procedures. This concept was expanded to include multiple histology protocols, thereby enabling analysis to be tailored to a variety of biomolecules and tissue types.     

Two-step matrix application for the enhancement and imaging of latent fingermarks

Matrix deposition is a crucial aspect for successful matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI MSI) analysis. The search for more efficient protocols over the years has resulted in the devising of "dry matrix methods" in which the matrix is solely or preliminarily deposited as powder and acts in most cases as a seeding agent. Although not fully embraced by the MALDI MSI community, these methods have proven to be more efficient in terms of ion intensity, ion abundance, and ion images in the experimental circumstances they were employed. Here we report a novel two-step matrix application method, that we have named the "dry-wet" method, where the matrix is dusted onto the sample followed by solvent spray using a robotic device. The new method has been successfully applied to the detection and mapping of several analyte classes within latent fingermarks. Dusting the matrix generated the added advantage of enhancing the latent fingermarks which are invisible. This allows not only for an optical image to be taken of the fingermark in situ but also bridges the gap in the application of MALDI MSI technology in this field; with the use of the methodology reported, fingermark enhancement, recovery, and analysis from different surfaces is now compatible with subsequent MALDI MSI analysis thus allowing visual and chemical information to be obtained simultaneously.     

Integrating histology and imaging mass spectrometry

MALDI (matrix-assisted laser desorption/ionization) imaging mass spectrometry (IMS) is a new technology that generates molecular profiles and two-dimensional ion density maps of peptide and protein signals directly from the surface of thin tissue sections. This allows specific information to be obtained on the relative abundance and spatial distribution of proteins. One important aspect of this is the opportunity to correlate these specific ion images with histological features observed by optical microscopy. To facilitate this, we have developed protocols that allow MALDI mass spectrometry imaging and optical microscopy to be performed on the same section. Key components of these protocols involve the use of conductive glass slides as sample support for the tissue sections and MS-friendly tissue staining protocols. We show the effectiveness of these with protein standards and with several types of tissue sections. Although stain-specific intensity variations occur, the overall protein pattern and spectrum quality remain consistent between stained and control tissue samples. Furthermore, imaging mass spectrometry experiments performed on stained sections showed good image quality with minimal delocalization of proteins resulting from the staining protocols.     

Single-neuron analysis using CE combined with MALDI MS and radionuclide detection

Capillary electrophoresis (CE) has been combined with matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) and radionuclide detection to assay mass-limited biological samples. Nanovial sampling techniques enable injections into the CE capillary from 50 to 150-nL volume samples; after the separation, nanoliter fraction collection combines the CE effluent with a MALDI matrix and minimizes sample spreading, thus allowing both MALDI MS and radionuclide detection on the CE fractions. MALDI MS complements the elution time information of CE by providing accurate molecular mass data, and radionuclide detection provides zeptomole limits of detection with quantitative information. While MALDI MS detects all fully processed peptides at sufficient concentration, culturing the neuron in media containing 35S-Met provides selective radionuclide detection of newly synthesized methionine-containing peptides. The analysis and detection of the expected neuropeptides and hormones in a single 40-microm bag cell neuron from Aplysia californica with CE/MALDI MS/radionuclide detection demonstrates the ability of this hyphenated approach to work with chemically complex mass-limited samples.     

Sample preparation for MALDI mass spectrometry using an elastomeric device reversibly sealed on the MALDI target

A new method for improving low-concentration sample recovery and reducing sample preparation steps in matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) is presented. In the conventional approach, samples are typically desalted and/or concentrated with various techniques and deposited on the MALDI target as small droplets. In this work, we describe a new approach in which an elastomeric device is reversibly sealed on the MALDI target to form a multi-well plate with the MALDI target as the base of the plate. The new format allows a larger volume (5-200 microL) of samples to be deposited on each spot and a series of sample handling processes, including desalting and concentrating, to be performed directly on the MALDI target. Several advantages have been observed: (i) multiple sample transferring steps are avoided; (ii) recovery of low-concentration peptides during sample preparation is improved using a novel desalting method that utilizes the hydrophobic surface of the elastomeric device; and (iii) sequence coverage of the peptide mass fingerprinting map is improved using a novel method in which proteins are immobilized on the hydrophobic surface of the elastomeric device for in-well trypsin digestion, followed by desalting and concentrating the digestion products in the same well.     

Atmospheric pressure MALDI/ion trap mass spectrometry

A new sample ionization technique, atmospheric pressure matrix-assisted laser desorption/ionization (AP MALDI), was coupled with a commercial ion trap mass spectrometer. This configuration enables the application-specific selection of external atmospheric ionization sources: the electrospray/APCI (commercially available) and AP MALDI (built in-house), which can be readily interchanged within minutes. The detection limit of the novel AP MALDI/ion trap is 10-50 fmol of analyte deposited on the target surface for a four-component mixture of peptides with 800-1700 molecular weight. The possibility of peptide structural analysis by MS/MS and MS3 experiments for AP MALDI-generated ions was demonstrated for the first time.     

MALDI MS sample preparation by using paraffin wax film: systematic study and application for peptide analysis

Recently developed sample preparation techniques employing hydrophobic sample support have improved the detection sensitivity and mass spectral quality of matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). These methods concentrate the samples on target by minimizing the sample area via the solvent repellent effect of the target surface. In the current study, we employed the use of paraffin wax film (Parafilm M) for improved MALDI MS analysis of low-abundance peptide mixtures, including neuronal tissue releasate and protein tryptic digests. This thin film was found to strongly repel polar solvents including water, methanol, and acetonitrile, which enabled the application of a wide range of sample preparation protocols that involved the use of various organic solvents. A "nanoliter-volume deposition" technique employing a capillary column has been used to produce tiny ( approximately 400 microm) matrix spots of 2,5-dihydroxybenzoic acid on the film. By systematically optimizing the sample volume, solvent composition, and film treatment, the Parafilm M substrate in combination with the nanoliter-volume matrix deposition method allowed dilute sample to be concentrated on the film for MALDI MS analysis. Peptide mixtures with nanomolar concentrations have been detected by MALDI time-of-flight and MALDI Fourier transform ion cyclotron resonance mass spectrometers. Overall, the use of Parafilm M enabled improved sensitivity and spectral quality for the analysis of complex peptide mixtures.     

Pressure-assisted capillary electrophoresis coupling with matrix-assisted laser desorption/ionization-mass spectrometric imaging for quantitative analysis of complex Peptide mixtures

Herein, we report a pressure-assisted capillary electrophoresis-mass spectrometric imaging (PACE-MSI) platform for peptide analysis. This new platform has addressed the sample diffusion and peak splitting problems that appeared in our previous groove design, and it enables homogeneous deposition of the CE trace for high-throughput MALDI imaging. In the coupling of CE to MSI, individual peaks (m/z) can be visualized as discrete colored image regions and extracted from the MS imaging data, thus eliminating issues with peak overlapping and reducing reliance on an ultrahigh mass resolution mass spectrometer. Through a PACE separation, 46 tryptic peptides from bovine serum albumin and 150 putative neuropeptides from the pericardial organs of a model organism blue crab Callinectes sapidus were detected from the MALDI MS imaging traces, enabling a 4- to 6-fold increase of peptide coverage as compared with direct MALDI MS analysis. For the first time, quantitation with high accuracy was obtained using PACE-MSI for both digested tryptic peptides and endogenous neuropeptides from complex biological samples in combination with isotopic formaldehyde labeling. Although MSI is typically employed in tissue imaging, we show in this report that it offers a unique tool for quantitative analysis of complex trace-level analytes with CE separation. These results demonstrate a great potential of the PACE-MSI platform for enhanced quantitative proteomics and neuropeptidomics.     

GPC separation of polymer samples for MALDI analysis

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry is an important technique to characterize the average molecular weights, oligomer repeat units, and end groups of polymer materials. Although MALDI methods have been developed for a broad variety of different synthetic polymers, MALDI continues to struggle with polymer samples having broad polydispersity (PD). We have combined MALDI and gel permeation chromatography (GPC) analyses for broad PD polymer samples with the use of a liquid chromatography (LC) interface. The LC interface uses heated sheath gas and a capillary nozzle to remove most of the mobile phase and deposit the GPC eluants on the precoated matrix on a moving MALDI plate. Our experiments demonstrate that the combination of GPC-LC interface-MALDI can aid in the characterization of broad PD samples, the verification of the presence of low-intensity, high-mass oligomers, and the detection of minor series in polymer samples.     

On-probe sample preparation without washes for matrix-assisted laser desorption/ionization mass spectrometry using an anion exchange medium

When the mass spectra of biological samples (proteins, peptides, and so on) are obtained routinely by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), a serious problem is the reduction of the ionization efficiency by impurities, such as buffer salts and detergents. We focused our attention on devising a method to maintain the ionization efficiency of protein samples, even in the presence of sodium dodecyl sulfate (SDS), without any extra purification step. Although no protein ion peaks are observed in the presence of 2.5% SDS with the usual methods, the addition of a granular anion exchange silica gel to the matrix solution allowed the protein ion peaks to be obtained with an excellent signal-to-noise ratio. Together with other supporting experiments, we suggest that the positively charged surface (the basic environment derived from the anion exchange groups) and the roughness of the particles were important for good ionization in the presence of a high SDS concentration. For a very uneven surface, the SDS might be absorbed into the particle interiors during the process of cocrystallization with the matrix and analytes, which is known as the molecular sieve effect, and the SDS concentration in the surface crystalline film might be reduced. As a result, we developed an on-probe sample preparation method without washes for MALDI, using a strong anion exchange silica gel. This method is applicable even in the presence of 2.5% SDS, and is not only very simple but also inexpensive, because it can be used with the standard MALDI target plates.     

Role of electrons in laser desorption/ionization mass spectrometry

A nonmetallic sample support for matrix-assisted laser desorption/ionization (MALDI) mass spectrometry enhances the positive ion yield by 2 orders of magnitude and generally affects the charge balance in the desorption plume. We interpret the effects of the target material and of the sample preparation on MALDI mass spectra as a result of photoelectrons emitted upon laser irradiation of a metal target covered by a thin sample layer. These electrons are shown to play an important role in MALDI and laser desorption/ionization because they decrease the yield of positive ions, reduce ions with higher oxidation states, and affect the ion velocity distribution as well as the mass resolution. Understanding the role of these photoelectrons helps to clarify previously obscure aspects of the ion formation mechanism in MALDI.     

Massively parallel sample preparation for the MALDI MS analyses of tissues

Investigation of the peptidome of the nervous system containing large, often easily identifiable neurons has greatly benefited from single-cell matrix-assisted laser desorption/ionization (MALDI) mass spectrometry and has led to the discovery of hundreds of novel cell-to-cell signaling peptides. By combining new sample preparation methods and established protocols for bioanalytical mass spectrometry, a high-throughput, small-volume approach is created that allows the study of the peptidome of a variety of nervous systems. Specifically, approximately single-cell-sized samples are rapidly prepared from thin tissue slices by adhering the tissue section to a glass bead array that is anchored to a stretchable membrane. Stretching the membrane fragments the tissue slice into thousands of individual samples, their dimensions predominately governed by the size of the individual glass beads. Application of MALDI matrix, followed by the repeated condensation of liquid microdroplets on the fragmented tissue, allows for maximal analyte extraction and incorporation into MALDI matrix crystals. During extraction, analyte migration between the pieces of tissue on separate beads is prevented by the underlying hydrophobic substrate and by controlling the size of the condensation droplets. The procedure, while general in nature, may be tailored to the needs of a variety of analyses, producing mass spectra equivalent to those acquired from single-cell samples.     

Nanoliter solvent extraction combined with microspot MALDI TOF mass spectrometry for the analysis of hydrophobic biomolecules

A nanoliter solvent extraction technique combined with microspot matrix-assisted laser desorption/ionization (MALDI) mass spectrometry is presented. This method involves the use of a nanoliter droplet containing organic solvents at the tip of a small capillary for extraction. The droplet is formed inside a microliter aqueous sample containing the analyte of interest. After extraction, the droplet is deposited onto a MALDI target precoated with a thin matrix layer. Since the nanoliter droplet never touches the sample container wall, any possible extraction of contaminants adsorbed on the plastic or glassware is avoided. In addition, there is no need to concentrate the organic phase after the extraction, thus avoiding any possible loss during the concentration step. The nanoliter volume can be readily deposited onto a MALDI target, producing a high analyte concentration within a microspot. Combined with microspot MALDI, this technique allows for very sensitive analysis of the extracted analyte. The performance of this technique is illustrated in several applications involving the detection of hydrophobic peptides or phospholipids. It is shown that very hydrophobic analytes can be extracted from small-volume samples containing a large amount of salts and/or more hydrophilic analytes, which tend to give dominant signals in conventional MALDI experiments. Nanoliter extraction of analyte from samples containing less than 100 nM hydrophobic analyte and over 1 microM easily ionized hydrophilic species is demonstrated. Finally, using the analysis of the ionophore valinomycin as an example, it is demonstrated that the technique is a more reliable tool for probing metal-peptide complexes than regular MALDI sample preparations.