Highly thermal stable and color tunable composite fluorescent ceramics for high-power white LEDs

All-inorganic fluorescent materials with high luminescence efficiency, high thermal stability and adjustable spectrum are urgently needed, especially for high-power white LEDs. In this work, Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺ fluorescent ceramics were prepared firstly by vacuum sintering technology, and then Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺/SrAlSiN₃: Eu²⁺ composite fluorescent ceramics were synthesized by technology screen-printing and laser ablation. Under 460 nm excitation, the composite fluorescent ceramic exhibits a broad emission band from 500 nm to 675 nm, which is attributed to the 5d → 4f transitions of Ce³⁺ and Eu²⁺ ions, respectively. By controlling the screen-printed times, the color coordinates of the composite fluorescent ceramics could be tuned from (0.3125, 0.2437) to (0.4106, 0.3824), and the correlated color temperature can vary from 3296 to 9689 K. In particular, the thermal stability of composite fluorescent ceramics is improved obviously after laser ablation. At 423 K, the luminescence intensity at 535 nm and 620 remains 91% and 94% of that at room temperature, respectively. Combining a 460 nm blue chip and the composite fluorescent ceramic, a white LED with CRI = 90, and the maximum luminous efficiency can be up to 148 lm/W. Our results indicate that Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺/SrAlSiN₃: Eu²⁺ composite fluorescent ceramics could be used in high-power white LEDs.     

Characterization of High-Gadolinium Y0.6Gd1.34Eu0.06O3 Powder and Fabrication of Transparent Ceramic Scintillator Using Pressureless Sintering

Comparatively high gadolinium contents are of primary importance for (Y,Gd)₂O₃:Eu scintillators because of expected higher scintillation intensity and higher light output of the materials. Transparent Y_0.6Gd_1.34Eu_0.06O₃ ceramic, with a high gadolinium composition of ∼67 mol%, has been fabricated via vacuum sintering using synthesized sinterable powders. The precursor powder was coprecipitated with ammonium hydrogen carbonate as the precipitant and the powder calcined at 1100°C showed the best sintering activity. Transparent Y_0.6Gd_1.34Eu_0.06O₃ ceramic, exhibiting an in-line transmittance of 66.7% at 610 nm, was obtained by vacuum sintering at 1670°C for 2 h. Under X-ray excitation, the ceramic exhibited characteristic emissions of the Eu³⁺ ions.     

Analysis of fluorescence properties of novel Eu3+-doped ZnAl2O4-based ceramic aerogels for high-power optical device applications

A novel series of ZnAl₂O₄:Eu³⁺ aerogels (ZAE) and mullite ceramic phase reinforced ZnAl₂O₄:Eu³⁺ aerogels (MZAE) with high fluorescence thermal stability have been firstly synthesized for the encapsulation of high-power optical devices. However, due to the intrinsic structural brittleness of the aerogel, the structure of ZAE tends to collapse during the heat treatment and the fluorescence performance falls short of expectations. To this end, we propose a simple and effective strategy to enhance the structural rigidity of fluorescent aerogels by introducing the mullite ceramic phase into the network structure of ZAE. This can effectively suppress the agglomeration of Eu³⁺ caused by the collapse of the structure during the heat treatment, thus enhancing the optical properties of the aerogel. Compared with ZAE, MZAE has higher fluorescence thermal stability. The fluorescence intensity of MZAE at 498 K is still 75 % of that at 298 K, and the chromaticity shift is only 22 × 10⁻³.     

Fabrication of fine-grained undoped Y2O3 transparent ceramic using nitrate pyrogenation synthesized nanopowders

Y₂O₃ ceramic is a promising optical material for mid-infrared (IR) windows and domes. Improvements in the mechanical and thermal performance of this material have become urgent if it is to perform adequately under extreme conditions. Herein, Y₂O₃ nanopowders were produced through the nitrate pyrogenation method. The final Y₂O₃ transparent ceramics were fabricated with a hybrid sintering method combining low temperature presintering and a subsequent hot isostatic pressing (HIP) treatment. The synthesis of nanopowders and the fabrication of the final ceramic products were investigated in detail. The Y₂O₃ ceramic sample that was presintered at 1350?°C provided the optimum microstructure for HIP treatment and resulted in an average grain size of 0.5?µm. Owing to the reduced grain size, the flexure strength and Vickers hardness of the sample were improved to 180?MPa and 8.4?GPa, respectively. Furthermore, the achieved pure Y₂O₃ ceramic demonstrated an excellent thermal conductivity at high temperature.     

Mn2+ activated MgAlON transparent ceramic: A new green-emitting transparent ceramic phosphor for high-power white LED

A novel Mn²⁺ activated green-emitting MgAlON transparent ceramic phosphor was synthesized from Mg_0.21Al_2.57O_3.80N_0.20:0.03Mn²⁺ (MgAlON:Mn) phosphor powder by pressureless sintering combining with hot isostatic pressing. By crystalline structure refinement and cathodoluminescence (CL) characterization, it is demonstrated that Mn²⁺ was dissolved in the spinel lattice and occupied the tetrahedral site. The ceramic, retaining high transmittance in UV–vis region (up to 82% at 800 nm) and excellent thermal-mechanical properties of MgAlON transparent ceramic-matrix, shows a strong green emission at 513 nm under 445 nm light excitation. Compared with its powder counterpart, the ceramic phosphor exhibits higher green color purity, higher internal quantum efficiency (47%) and lower thermal quenching. It is suggested that this novel green solid phosphor could be applied in high color rendering and high-power white light-emitting diodes when combined with a red solid phosphor and a blue LED chip.     

Y2O3:Eu3+@SiO2 nanocomposites as a convertor for a broadband solar-blind UV photodetector

Core–shell nanocomposites have attracted extensive attention in the photoelectric field because of their improved material properties and the combination of multiple functions. Particularly, these nanocomposites exhibit tunable structure and excellent optical properties. Inspired by these unique features, a novel optically active nanocomposites, Y₂O₃:Eu³⁺@SiO₂ with a core–shell structure, is designed and fabricated by a hydrothermal method and electrophoretic deposition. In addition, the Y₂O₃:Eu³⁺@SiO₂ composite film is also successfully developed and applied as a spectral down-converter in the solar-blind ultraviolet (UV) waveband region of 200–280 nm. Moreover, a broadband solar-blind UV photodetector device is elaborated and a notable enhancement in the UV sensitivity is achieved. The findings not only provide a new idea for the development of broadband solar-blind UV photodetector but also extended the application range of core–shell nanocomposites in photonics.     

Gd3Al3Ga2O12:Ce,Mg2+ transparent ceramic phosphors for high-power white LEDs/LDs

Gd₃Al₃Ga₂O₁₂:1.5%Ce, xMg²⁺ (GAGG:1.5%Ce, xMg²⁺) transparent ceramic phosphors (TCPs) were prepared via a two-step sintering method. The effects of MgO on microstructures and luminescent properties of GAGG:Ce TCPs are investigated for the first time. For the optimized Mg²⁺ of x = 0.5%, the in-line transmittance of the obtained TCP reaches 78.6%. Performances of the titled TCPs in high-power light-emitting diodes (LEDs) and laser diodes (LDs) lighting are illustrated. The optimized TCP shows the luminous efficacy of 84.0 lm W^?1 in LD lighting. This work provides a strategy to modify TCPs for the next-generation LD lighting.     

White light emission from novel host-sensitized single-phase Y2WO6: Ln3+ (Ln3+=Eu3+, Dy3+) phosphors

A series of Eu³⁺- or Dy³⁺-doped and Eu³⁺/Dy³⁺ co-doped Y₂WO₆ in pure phase was synthesized via high-temperature solid-state reaction. X-ray diffraction, diffuse reflection spectra, photoluminescence excitation and emission spectra, the CIE chromaticity coordinates and temperature-dependent emission spectra were exploited to investigate the phosphors. Upon UV excitation at 310 nm, efficient energy transfer from the host Y₂WO₆ to dopant ions in Eu³⁺ or Dy³⁺ single-doped samples was demonstrated and those phosphors were suitable for the UV LED excitation. The intense red emission was observed in Y₂WO₆: Eu³⁺, and blue and yellow ones were observed in Y₂WO₆: Dy³⁺. Concentration quenching in Y₂WO₆: Dy³⁺ phosphors could be attributed to the electric dipole-dipole interaction. In Eu³⁺/Dy³⁺ co-doped Y₂WO₆ phosphors energy transfer process only took place from the host to Eu³⁺/Dy³⁺ ions and warm white-light emission can be obtained by adjusting the dopant concentrations. The temperature-dependent luminescence indicated Eu³⁺/Dy³⁺ co-doped Y₂WO₆ was thermally stable. Our overall results suggested that Y₂WO₆: Ln³⁺ (Ln³⁺=Eu³⁺, Dy³⁺) as warm white-light emitting host-sensitized phosphor might be potentially applied in WLEDs.     

White light emitting from YVO4/Y2O3:Eu3+,Bi3+ composite phosphors for UV light-emitting diodes

A series of (1−x)YVO₄/xY₂O₃:Eu³⁺_0.006,Bi³⁺_0.006 (0≤x≤0.54) composite phosphors was synthesized in one step by high temperature solid state reaction and the photoluminescence properties were investigated. By means of co-doping Eu³⁺ and Bi³⁺ ions into the composite matrices composed of YVO₄ and Y₂O₃ crystals, the YVO₄/Y₂O₃:Eu³⁺,Bi³⁺ phosphor exhibits simultaneously the blue (418 nm), green (540 nm) and orange-red (595, 620 nm) emissions. The broad blue and green emissions are attributed to the ³P₁–¹S₀ transitions of Bi³⁺ ion both in Y₂O₃ and in YVO₄ matrices. Moreover, the sharp orange-red emissions are attributed to the ⁵D₀–⁷F_1,2 transitions of Eu³⁺ ion in YVO₄ matrix. By tuning the mole ratio of YVO₄/Y₂O₃ matrices the white light-emitting could be obtained. The results indicated that when the mole ratio of Y₂O₃ (x) is at 0.11–0.54 mol, the (1−x)YVO₄/xY₂O₃:Eu³⁺_0.006,Bi³⁺_0.006 phosphors emit white light by combining the blue, green and orange-red emissions under the excitation of 360–370 nm wavelength which matches the emission of the commercial UV-LED diode. This implies that the phosphors may be the promising white light materials with broad absorption band for white light-emitting diodes.     

Effects of Ho3+ concentration on the fabrication and properties of Ho: Y2O3-MgO nanocomposite for Mid-infrared laser applications

Infrared transparent Ho: Y₂O₃-MgO nanocomposite ceramics with a volume ratio of 50:50 (RE₂O₃: MgO) were prepared by combining sol-gel powder synthesis and hot-pressing sintering techniques. In order to obtain Ho: Y₂O₃-MgO nanocomposite ceramics with fine grain size, dense microstructure and homogeneous phase domains, the effect of sintering temperature and Ho³⁺ doping concentration were studied. Transmittance and SEM measurement revealed that the grain size of 3 at.% Ho: Y₂O₃-MgO ceramic sintered at 1250 °C is 141 nm, and the transmission is up to 85.2% at 5 μm. The detailed spectroscopic investigation of x at.% Ho: Y₂O₃-MgO (x = 1, 3, 5, 7, 9, 15) ceramics was performed. The nanocomposites exhibited photoluminescence properties similar to that of Ho: Y₂O₃ crystals and ceramics. In addition, the thermal conductivity of 3 at.% Ho: Y₂O₃-MgO ceramic is 13.04 W/m·K, which is superior to that of Ho:Y₂O₃ ceramics. The high transmission, excellent thermal conductivity, and outstanding optical characteristics indicated that Ho: Y₂O₃-MgO ceramics is a promising material for efficient infrared solid-state laser.     

Impact of Eu3+ Dopants on Optical Spectroscopy of Ce3+: Y3Al5O12‐Embedded Transparent Glass‐Ceramics

Transparent glass‐ceramics containing Ce³⁺: Y₃Al₅O₁₂ phosphors and Eu³⁺ ions were successfully fabricated by a low‐temperature co‐sintering technique to explore their potential application in white light‐emitting diodes (WLEDs). Microstructure of the sample was studied using a scanning electron microscope equipped with an energy dispersive X‐ray spectroscopy. The impact of co‐sintering temperature, Ce³⁺: Y₃Al₅O₁₂ crystal content and Eu³⁺ doping content on optical properties of glass‐ceramics were systematically studied by emission, excitation spectra, and decay curves. Notably, the spatial separation of these two different activators in the present glass‐ceramics, where Ce³⁺ ions located in YAG crystalline phase while the Eu³⁺ ones stayed in glass matrix, is advantageous to the realization of both intense yellow emission assigned to Ce³⁺: 5d→4f transition and red luminescence originating from Eu³⁺: 4f→4f transitions. As a result, the quantum yield of the glass‐ceramic reached as high as 93%, and the constructed WLEDs exhibited an optimal luminous efficacy of 122 lm/W, correlated color temperature of 6532 K and color rendering index of 75.     

Tunable white light and energy transfer of Dy3+ and Eu3+ doped Y2Mo4O15 phosphors

A series of Dy³⁺ or/and Eu³⁺ doped Y₂Mo₄O₁₅ phosphors were successfully synthesized at a low temperature of 600 °C via solid state reaction. The as-prepared phosphors were characterized by X-ray powder diffraction (XRD), scanning electronic microscope (SEM), photoluminescence (PL) excitation, emission spectra and PL decay curves. XRD results demonstrate that Y₂Mo₄O₁₅: Dy³⁺, Eu³⁺ has the monoclinic structure with the space group of p21/C(14). Under the excitation of ultraviolet (UV) or near-UV light, the Dy³⁺ and Eu³⁺ ions activated Y₂Mo₄O₁₅ phosphors exhibit their characteristic emissions in the blue, yellow and red regions. The emitting light color of the Y₂Mo₄O₁₅: 0.08Dy³⁺, yEu³⁺ phosphors can be adjusted by varying the concentration ratio of Dy³⁺ to Eu³⁺ ions and a white light is achieved when the doping concentration of Eu³⁺ is 5%. In addition, the energy transfer from Dy³⁺ to Eu³⁺ is also confirmed based on the luminescence spectra and decay curves.     

High luminescent brightness and thermal stability of red emitting Li3Ba2Y3(WO4)8:Eu3+ phosphor

A series of Li₃Ba₂Y_3−x(WO₄)₈:xEu³⁺ (x=0.1, 1, 1.5, 2 and 2.8) phosphors were synthesized by a high temperature solid-state reaction method. Under the excitation of near ultraviolet (NUV) light, the as-prepared phosphor exhibits intense red luminescence originating from the characteristic transitions of Eu³⁺ ions, which is 1.8 times as strong as the commercial Y₂O₂S:Eu³⁺ phosphor. The optimal doping concentration of Eu³⁺ ions here is confirmed as x=1.5. The electric dipole-quadrupole (D-Q) interaction is deduced to be responsible for concentration quenching of Eu³⁺ ions in the Li₃Ba₂Y₃(WO₄)₈ phosphor. The analysis of optical transition and Huang-Rhys factor reveals a weak electron-phonon coupling interaction. The temperature-dependent emission spectra also indicate that the as-prepared Li₃Ba₂Y₃(WO₄)₈:Eu³⁺ phosphor has better thermal stability than that of the commercial Y₂O₂S:Eu³⁺ phosphor. Therefore, our results show that the as-prepared Li₃Ba₂Y₃(WO₄)₈:Eu³⁺ phosphor is a promising candidate as red emitting component for white light emitting diodes (LEDs).     

Ion-exchanged LTA zeolite derived nepheline phase NaAlSiO4:Eu2+ ceramic phosphor for laser illumination

A reliable yellow phosphor converter that can be efficiently excited by a 405 nm bluish violet laser is in high demand for laser illumination applications. A NaAlSiO₄:Eu²⁺ phosphor with a quantum efficiency reaching 92% was obtained using LTA zeolite as the raw material. NaAlSiO₄:Eu²⁺ ceramics with suitable porosities for laser illumination were prepared from the phosphor powders via spark plasma sintering. The ceramics lost only 2% of the quantum efficiency compared to the powders, maintained good thermal quenching properties (30% drop at 150 °C), and showed good thermal conductivity (2.02 W‧m⁻¹‧K⁻¹). The NaAlSiO₄:Eu²⁺ ceramic with 405 nm bluish violet lasers, with the increase in laser power density to 9.15 W/mm², exhibited an increasing luminous flux (23.83–70.26 lm) and maintained a stable luminous efficacy (47.7–46.8 lm/W), and the temperature distribution of the ceramic remained uniform and stable under long-time laser irradiation. This indicates that the nepheline-phase NaAlSiO₄:Eu²⁺ ceramic is a promising material for laser illumination.     

Enhanced red emission and improved thermal quenching of CaAlSiN3:Eu2+ phosphors via boron doping

The development of high-performance phosphors is required for phosphor-converted white light-emitting diodes. However, most approaches are unable to achieve optimum emission intensity and thermal quenching simultaneously. Here, a series of CaAlSiN₃:Eu²⁺ (CASN:Eu²⁺) red-emitting phosphors doped with B were synthesized using field-assisted sintering technology. Compared with CASN:Eu²⁺, the B-doped phosphor exhibited high external quantum efficiency (EQE) and good thermal quenching performance. With boron doping, the EQE of CaAlSiN₃:Eu²⁺ shows an obvious growth, increasing from 48.83% to 70.68%. Meanwhile, thermal quenching performance has also been greatly improved, which is strongly associated with the band structure of Eu²⁺ and the crystal structure of CASN. The location of B in the crystal lattice was studied and the mechanism of improving thermal quenching via B doping was discussed in detail. Finally, a white LED fabricated by the combination of a GaN blue chip (450 nm) with the as-synthesized red phosphors and Y₃(Al, Ga)₅O₁₂:Ce³⁺ green phosphors (531 nm), shows a high color rendering index (Ra =91.6). This study offers a novel method to improve luminescence properties of CASN:Eu²⁺ red-emitting phosphors, which may broaden their application in solid-state lighting devices.     

Al2O3-Ce:GdYAG composite ceramic phosphors for high-power white light-emitting-diode applications

In order to meet the increasing demand of high-power light-emitting-diode (LED) lighting, state-of-the-art white light-emitting diode technology needs phosphors with high thermal conductivity and high luminous efficacy as color converters. In this work, translucent Al₂O₃-Ce:GdYAG composite phosphors were prepared by solid-state reactive sintering. The microstructure shows that the Al₂O₃ particles are uniformly dispersed in the Ce:GdYAG matrix. These particles can not only improve the thermal conductivity of the ceramics, but also promote the extraction efficacy. The luminous characteristics of the Ce:GdYAG and Al₂O₃-Ce:GdYAG ceramics were analyzed after being packaged with blue LED. When the molar ratio of Al₂O₃/Ce:GdYAG is 0.8, a high luminous efficacy value of 112.6 lm/W is achieved by the Al₂O₃-Ce:GdYAG composite ceramic phosphor with the thickness of 0.4 mm, as well as the highest CRI valve of 71.4. The appropriate photoelectric properties of this kind of ceramic phosphor make it a promising candidate for high-power LED device.     

Fabrication and Characterization of Transparent (Y0.98−xTb0.02Eux)2O3 Ceramics with Color‐Tailorable Emission

Transparent (Y_0.98?xTb_0.02Eu_x)₂O₃ (x = 0–0.04) ceramics with color‐tailorable emission have been successfully fabricated by vacuum sintering at the relatively low temperature of 1700°C for 4 h. These ceramics have the in‐line transmittances of ~73%–76% at 613 nm, the wavelength of Eu³⁺ emission (the ⁵D₀→⁷F₂ transition). Thermodynamic calculation indicates that the Tb⁴⁺ ions in the starting oxide powder can essentially be reduced to Tb³⁺ under ~10^?3 Pa (the pressure for vacuum sintering) when the temperature is above ~394°C. The photoluminescence excitation (PLE) spectra of the transparent (Y_0.98?xTb_0.02Eu_x)₂O₃ ceramics exhibit one spin‐forbidden (high‐spin, HS) band at ~323 nm and two spin‐allowed (low‐spin, LS) bands at ~303 and 281 nm. Improved emissions were observed for both Eu³⁺ and Tb³⁺ by varying the excitation wavelength from 270 to 323 nm, without notably changing the color coordinates of the whole emission. The transparent (Y_0.98Tb_0.02)₂O₃ ceramic exhibits the typical green emission of Tb³⁺ at 544 nm (the ⁵D₄→⁷F₅ transition). With increasing Eu³⁺ incorporation, the emission color of the (Y_0.98?xTb_0.02Eu_x)₂O₃ ceramics can be precisely tailored from yellowish‐green to reddish‐orange via the effective energy transfer from Tb³⁺ to Eu³⁺ under the excitation with the peak wavelength of the HS band. At the maximum Eu³⁺ emission intensity (x = 0.02), the ceramic shows a high energy‐transfer efficiency of ~85.3%. The fluorescence lifetimes of both the 544 nm Tb³⁺ and 613 nm Eu³⁺ emissions were found to decrease with increasing Eu³⁺ concentration.     

Structural and optical properties of Tm:Y2O3 transparent ceramic with La2O3, ZrO2 as composite sintering aid

The paper reports the use of La₂O₃ and ZrO₂ co-doping as a composite sintering aid for the fabrication of Tm:Y₂O₃ transparent ceramics. Two groups of experiments were conducted for investigating the influences of composite sintering aids on the microstructures and the optical properties of Tm:Y₂O₃ transparent ceramics in contrast to single La³⁺ and single Zr⁴⁺ doped Tm:Y₂O₃. Samples with composite sintering aids could realize fine microstructures and good optical properties at relatively low sintering temperatures. Grain sizes around 10 μm and transmittances close to theoretical value at wavelength of 2 μm were achieved for the 9 at.% La³⁺, 3 at.% Zr⁴⁺ co-doped samples sintered at 1500-1600 °C. The influences of the composite sintering aids on the emission intensities and the phonon energies of Tm:Y₂O₃ ceramics were also investigated.     

Effects of Gd Substitution on Sintering and Optical Properties of Highly Transparent (Y0.95−xGdxEu0.05)2O3 Ceramics

Highly transparent (Y_0.95?xGd_xEu_0.05)₂O₃ (x = 0.15–0.55) ceramics have been fabricated by vacuum sintering at the relatively low temperature of 1700°C for 4 h with the in‐line transmittances of 73.6%–79.5% at the Eu³⁺ emission wavelength of 613 nm (~91.9%–99.3% of the theoretical transmittance of Y_1.34Gd_0.6Eu_0.06O₃ single crystal), whereas the x = 0.65 ceramic undergoes a phase transformation at 1650°C and has a transparency of 53.4% at the lower sintering temperature of 1625°C. The effects of Gd³⁺ substitution for Y³⁺ on the particle characteristics, sintering kinetics, and optical performances of the materials were systematically studied. The results show that (1) calcining the layered rare‐earth hydroxide precursors of the ternary Y–Gd–Eu system yielded rounded oxide particles with greatly reduced hard agglomeration and the particle/crystallite size slightly decreases along with increasing Gd³⁺ incorporation; (2) in the temperature range 1100°C–1480°C, the sintering kinetics of (Y_0.95?xGd_xEu_0.05)₂O₃ is mainly controlled by grain‐boundary diffusion with similar activation energies of ~230 kJ/mol; (3) Gd³⁺ addition promotes grain growth and densification in the temperature range 1100°C–1400°C; (4) the bandgap energies of the (Y_0.95?xGd_xEu_0.05)₂O₃ ceramics generally decrease with increasing x; however, they are much lower than those of the oxide powders; (5) both the oxide powders and the transparent ceramics exhibit the typical red emission of Eu³⁺ at ~613 nm (the ⁵D₀→⁷F₂ transition) under charge transfer (CT) excitation. Gd³⁺ incorporation enhances the photoluminescence and shortens the fluorescence lifetime of Eu³⁺.     

Mg3Y2Ge3O12:Bi3+ UV fluorescent phosphor as the TiO2 “sensitizer” for enhancing the heavy oil viscosity reduction

Nowadays, visible fluorescent materials based on rare earth (RE) and non-RE ions doping have been extensively explored for white LEDs. As for the UV fluorescent materials, it is well known that they are not suitable for the lighting applications. As a result, when compared to the visible fluorescent materials, previous works paid little attention to the UV fluorescent materials. In this work, we report a type of Mg₃Y₂Ge₃O₁₂:Bi³⁺ UV fluorescent phosphor. To understand the crystal structural information and photoluminescence (PL) properties of samples, we have used the X-ray diffraction (XRD), scanning electronic microscope (SEM), UV–visible diffuse reflectance and PL spectra to characterize them. The structural results reveal that the Bi³⁺ doped sample show their particle size at about 30 μm. The PL results show that the Bi³⁺ doped sample upon excitation at 230 nm can show a broad emission band that can almost cover the whole UV spectral region from 290 nm to 410 nm. Since this UV fluorescent band is exactly in agreement with the UV absorption region of TiO₂ semiconductor, we have fabricated several Mg₃Y₂Ge₃O₁₂:Bi³⁺/TiO₂-based ceramic plates and proposed used them to serve as an efficient UV irradiation source for photocatalytic application. As a result, we find that the TiO₂ can exhibit the significantly enhanced photocatalytic property for the heavy oil viscosity reduction after adding the Mg₃Y₂Ge₃O₁₂:Bi³⁺ UV fluorescent phosphor.