共查询到20条相似文献,搜索用时 15 毫秒
1.
对两种不同角度的螺纹翅片管,分别在螺旋折流板及新型壳程挡板支撑下的3种结构的油冷却器进行了传热与阻力性能试验,结果表明,翅片角为5°的螺纹翅片管的传热性能比翅片角为13.5°的螺纹翅片管提高10%~30%,而流动阻力相差很小。对于同角度的螺纹翅片管油冷却器,新型阻流片壳程挡板虽然传热效果不及螺旋折流板,但是其壳程压降较螺旋折流板降低30%~40%,且单位压降下的热交换量提高10%~40%,这种结构对于大流量、长径比大且对壳程压降要求较高的油冷却器有一定的研究意义。 相似文献
2.
Experimental and theoretical investigations of the thermal performance of a variety of heat sinks have been made. The heat
sinks investigated were: straight finned, elliptical finned, small pin finned, circular disc finned, elliptical disc finned,
frustum finned and double base straight finned. Realistic, manufacturable geometries are considered for minimizing thermal
resistance at low velocity. The experimental results of several of the simple geometry heat sinks have been compared to those
predicted by a commercially available computational fluid dynamics code fluent. The parameters such as fin geometry, fin pitch
and fin height are optimized primarily in this paper and a second task is carried out to optimize base plate thicknesses,
base plate materials and modify design of heat sink for improving the thermal performance in the next generation. Although
the performance of heat sink is good, the temperature of heat sink at center is high. In this research work, the best heat
sink geometry is selected and modified in order to reduce maximum temperature distribution and hot spots of heat sink at center
by changing the geometry design and adding one more base. It is observed that flow obstructions in the chassis and the resulting
air recirculation affect the heat sink temperature distribution. 相似文献
3.
建立了H形鳍片管的三维物理模型,对鳍片管传热机理进行分析.利用大型通用有限元分析软件ANSYS的FLOTRAN模块,建立了热流耦合的有限元模型,对鳍片管的稳态传热过程进行了数值计算,得到了鳍片管内、外流体的温度场分布.在对鳍片高度和鳍片间距进行调整的基础上分析了高度和间距对换热效率的影响,提出了在此边界条件下对鳍片管优化的方案. 相似文献
4.
叠片式翅片管空气冷却器是一种高效、紧凑的空气换热高备。对新开发的第二代波纹型叠片进行了传热及阻力性能的测试,获得了一系列试验工况下的传热和管外空气流动阻力数据,通过计算得出了管外换热准则关系式和空气流动阻力准则关系式,并与第一代平片型叠片的试验结果进行对比。结果表明,两种翅化比的波纹型叠片在常规换热工况下的传热性能相当,但比平片型叠片均提高了约9%;当翅化比相同时波纹型叠片的空气流动阻力比平片型叠片增大18%左右,但适当改小翅化比后,波纹型叠片在传热性能不降低的情况下,空气流动阻力可降低至仅比平片型叠片大2.5%左右。 相似文献
5.
利用CFD计算方法,对矩形翅片椭圆管热交换器进行了数值模拟,得到其在不同风速下的流动和换热特性,并就椭圆管和圆管之间阻力与换热特性进行了计算比较,分析讨论了片距及管排数对阻力特性的影响,为风洞热交换器设计提供依据。 相似文献
6.
This paper is a continuation of the authors’ previous work on spiral coil heat exchangers. In the present study, the heat
transfer characteristics and the performance of a spirally coiled finned tube heat exchanger under wet-surface conditions
are theoretically and experimentally investigated. The test section is a spiral-coil heat exchanger which consists of a steel
shell and a spirally coiled tube unit. The spiral-coil unit consists of six layers of concentric spirally coiled finned tubes.
Each tube is fabricated by bending a 9.6 mm diameter straight copper tube into a spiral-coil of four turns. The innermost
and outermost diameters of each spiral-coil are 145.0 and 350.4 mm, respectively. Aluminium crimped spiral fins with thickness
of 0.6 mm and outer diameter of 28.4 mm are placed around the tube. The edge of fin at the inner diameter is corrugated. Air
and water are used as working fluids in shell side and tube side, respectively. The experiments are done under dehumidifying
conditions. A mathematical model based on the conservation of mass and energy is developed to simulate the flow and heat transfer
characteristics of working fluids flowing through the heat exchanger. The results obtained from the present model show reasonable
agreement with the experimental data. 相似文献
7.
基于带翅片的扁管空冷器的传热过程,对带翅片的扁管建立模型,并利用该模型在不同的翅片长度及不同风速下进行数值模拟,分析了翅片长度的选择与迎面风速的关系。分析结果表明,当翅片长度增加到一定值后,通过增加翅片长度的手段来强化换热性能收效很小;在低迎面风速下,翅片长度不要过长;在高迎面风速下,仍存在较大的传热温差,空气出口温度的增加只能通过增加翅片长度来完成。 相似文献
8.
The flow and heat transfer characteristics of combined forced convection and radiation in the entrance region of internally
finned tubes are investigated numerically in this paper. The uniform flow is considered for an inlet flow condition. A three
dimensional parabolic problem is solved by a marching-type procedure envolving a series of two dimensional elliptic problems
in the cross-stream plane. The SIMPLER-algorithm and Raithby's pressure-velocity coupling method are employed to analyze the
flow and heat transfer characteristics. For the calculation of radiative heat transfer, the P 1-approximation and the weighted sum of gray gases method (WSGGM) are used. The effects of fin height, number of fins, optical
thickness, reference temperature, and Planck number on the flow and heat transfer characteristics are examined. It was found
that the effect of fin-height on the heat transfer characteristic is more dominant than that of number of fins. The present
results show that the optimal non-dimensional fin height and number of fins are 0.4 and 16, respectively. 相似文献
9.
The air-side forced convective heat transfer of a plate fin-tube heat exchanger is investigated by experimental measurement
and numerical computation. The heat exchanger consists of a staggered arrangement of refrigerant pipes with a diameter of
10.2 mm and a fin pitch of 3.5 mm. In the experimental study, the forced convective heat transfer was measured at Reynolds
numbers of 1082, 1397, 1486, 1591 and 1649 based on the diameter of the refrigerant piping and on the maximum velocity. The
average Nusselt number for the convective heat transfer coefficient was also computed for the same Reynolds number by using
the commercial software STAR-CD with the standard k - ɛ turbulent model. It was found that the relative errors of the average Nusselt numbers between the experimental and numerical
data were less than 6 percent in a Reynolds number range of 1082∼1649. The errors between the experiment and other correlations
from literature ranged from 7% to 32.4%. However, the literature correlation of Kim et al. is closest to the experimental
data within a relative error of 7%.
This paper was recommended for publication in revised form by Associate Editor Man-Yeong Ha
Jin-Gi Paeng recieved a bachelor’s degree in Aero Mechanical Engineering from Gyeong-sang National University in 2000. He then went on
to recieve his M.S. degrees from Changwon National University in 2004. Currently, he completed the doc-tor’s course and a
doctoral dissertation in 2007 and 2008, respectively. He will take a doctorate in 2008. 相似文献
10.
Among tubular heat exchangers, fin-tube types are the most widely used in refrigeration and air-conditioning equipment. Efforts to enhance the performance of these heat exchangers included variations in the fin shape from a plain fin to a slit and louver type. In the context of heat transfer augmentation, the performance of vortex generators has also been investigated. Delta winglet vortex generators have recently attracted research interest, partly due to experimental data showing that their addition to fin-tube heat exchangers considerably reduces pressure loss at heat transfer capacity of nearly the same level. The efficiency of the delta winglet vortex generators widely varies depending on their size and shape, as well as the locations where they are implemented. In this paper, the flow field around delta winglet vortex generators in a common flow up arrangement was analyzed in terms of flow characteristics and heat transfer using computational fluid dynamics methods. Flow mixing due to vortices and delayed separation due to acceleration influence the overall fin performance. The fin with delta winglet vortex generators exhibited a pressure loss lower than that of a plain fin, and the heat transfer performance was enhanced at high air velocity or Reynolds number. 相似文献
11.
The purpose of this study is to investigate the thermal response of a heat pipe shell-fin structure that is selectively coated and is subject to uneven radiation from upper and lower sides. Such a structure would arise when fins are attached to opposing sides of the condenser or evaporator section of heat pipes to enhance the heat transfer performance. Typical examples include radiators for space applications and solar energy collectors for water heating. The temperature distribution in the circumferential direction of the heat pipe shell as well as that in the fin is examined via theoretical modeling and numerical analysis. The model accounts for the effects of selective coatings. Both steady-state and transient solution procedures are presented. Examination of the steady-state results justifies the use of a thermally-lumped formulation for the heat pipe shell region. The effect of fin width is investigated as a typical design variable. The fin efficiency and the collector efficiency are also presented as functions of heat pipe operating temperature and fin widith. The influence of the surface properties on the thermal performance of the heat pipe shell-fin structure are also examined. 相似文献
12.
提出了一种圆管倾角渐增波纹翅片的管翅式换热器,利用FLUENT软件对其空气侧的流体流动和换热过程进行了数值模拟,得到了翅片通道中心面上的温度场和压力场的分布情况及平均传热系数、努赛尔数与速度的关系。并将其强化传热效果与倾角均匀波纹翅片换热器进行对比分析,结果表明倾角渐增波纹翅片比倾角均匀波纹翅片的传热效果更好,更节能。 相似文献
13.
Desktop computers have changed to accommodate increasing power, approaching 100 W. Heat dissipation becomes a significant issue in efficiency promotion and stable operation of air-cooled microelectronics and power electronics components and assemblies. Finned heat sinks are commonly used devices for enhancing heat transfer from air-cooled microelectronics and power electronics components and assemblies. The use of finned heat sinks increases the effective surface area for convective heat transfer, reducing the thermal resistance and operating temperatures in air-cooled electronics. The task of selecting the best heat sink for a particular application from the hundreds of configurations available from the various manufacturers can be a formidable task for an engineer. In a typical heat sink design, the objective is to achieve target heat dissipation, while restricting the consumption of valuable resources such as mass, fan power, pressure drop, and space claim. In this research work, preliminary studies have been carried out for the performance improvement of a parallel-plate heat sink considering the various geometric parameters, such as number of fins, fin length, fin height, and base height. The modeling and simulation of the heat sink is carried out with the computational fluid dynamics package. The results are analyzed using analysis of variance and response graphs. 相似文献
14.
为了研究U型地埋管换热,以线热源模型作为基础,以夏季制冷工况为例,运用C语言编程软件对其进行了分析求解。研究了运行时间、换热介质的流量、土壤物性、埋管深度对U型埋管传热的影响以及周围土壤温度分布变化规律。模拟结果表明:当换热介质流量和埋管深度均增大3倍,土壤导热系数增大1.6倍时,单位管长换热量变化幅度分别为9.9%、-10.7%、23.3%。研究结果可为U型垂直埋管换热器的优化设计提供参考。 相似文献
15.
The solution for the natural convection in internally finned horizontal annuli is obtained by using a numerical simulation
of time-dependent and two-dimensional governing equations. The fins existing in annuli influence the flow pattern, temperature
distribution and heat transfer rate. The variations of the fin configuration suppress or accelerate the free convective effects
compared to those of the smooth tubes. The effects of fin configuration, number of fins and ratio of annulus gap width to
the inner cylinder radius on the fluid flow and heat transfer in annuli are demonstrated by the distribution of the velocity
vector, isotherms and streamlines. The governing equations are solved efficiently by using a parallel implementation. The
technique is adopted for reduction of the computation cost. The parallelization is performed with the domain decomposition
technique and message passing between sub-domains on the basis of the MPI library. The results from parallel computation reveal
in consistency with those of the sequential program. Moreover, the speed-up ratio shows linearity with the number of processor. 相似文献
16.
以铜翅片管换热器为研究对象,通过合理的简化模型,以相邻2片换热片(取半片)及其之间的烟气通道作为计算区域,利用流体力学软件CFX对烟气通道的流动状况和换热情况进行了数值模拟。研究了管径、翅片厚度和翅片间距对排烟温度的影响,结果表明随着管径和翅片间距的增大排烟温度升高,随着翅片厚度增大排烟温度降低,排烟温度的升高或降低将影响排烟损失的大小,从而影响热效率。该数值模拟结果对改进翅片结构以提高热效率有一定指导意义。 相似文献
17.
The present study documents the constructal design and optimization of finned tubes used in air-cooled heat exchangers. The considered tubes are equipped with annular fins. The aim is to minimize the overall thermal resistance by morphing the geometry. The geometrical and thermo-physical parameters considered are the number of fins, ratio of fin height to tube diameter, Stanton number, ratio of fin conductivity to air conductivity, ratio of in-tube fluid conductivity to air conductivity and dimensionless pressure drop. Two constraints are applied in the optimization process: fixed overall volume of heat exchanger and fixed volume fraction of fin material. It is found that there exist optimal values for the number and the height of fins. Moreover, the optimal heat transfer has an extremum in a special volume fraction of fin material. 相似文献
18.
针对当前微电子芯片高热流密度问题,设计一种微小型毛细泵吸环路(Capillary pumped loops,CPL)热控制系统。介绍制造该微小型CPL的方法:采用犁切—挤压成形微沟槽翅结构和刨削成形整体式翅片散热片,毛细吸液芯则采用商用多孔泡沫金属或丝网材料。该微小型CPL系统由蒸发器、冷凝器、蒸汽联管、液体联管以及液体工质组成。蒸发器中含有多尺度多维交错互通微沟槽翅强化沸腾结构,冷凝器为微沟槽翅结构与翅片散热片组成的复合结构,可有效提高系统蒸发冷凝效率。整个系统利用工质蒸发冷凝相变传热,通过毛细泵吸作用和蒸发气体压力保证循环,依靠饱和毛细芯对气体的阻碍作用保证工质的单向流动,无需机械泵和阀控制。 相似文献
19.
In this study, one type of applicable analytical method, differential transformation method (DTM), is used to evaluate the
efficiency and behavior of a straight fin with variable thermal conductivity and heat transfer coefficient. Fins are widely
used to enhance heat transfer between primary surface and the environment in many industrial applications. The performance
of such a surface is significantly affected by variable thermal conductivity and heat transfer coefficient, particularly for
large temperature differences. General heat transfer equation related to the fin is derived and dimensionalized. The concept
of differential transformation is briefly introduced, and then this method is employed to derive solutions of nonlinear equations.
Results are evaluated for several cases such as: laminar film boiling or condensation, forced convection, laminar natural
convection, turbulent natural convection, nucleate boiling, and radiation. The obtained results from DTM are compared with
the numerical solution to verify the accuracy of the proposed method. The effects of design parameters on temperature and
efficiency are evaluated by some figures. The major aim of the present study, which is exclusive for this article, is to find
the effect of the modes of heat transfer on fin efficiency. It has been shown that for radiation heat transfer, thermal efficiency
reaches its maximum value. 相似文献
20.
We investigated the heat transfer enhancement and impairment mechanisms of the laminar natural convection on a vertical finned plate. Numerical analyses were performed for wide ranges of Prandtl numbers 0.7–2014, Rayleigh numbers 3.69×105−8.49×1010 and fin heights 0.0025–0.5 m. Experiments were performed for a few cases for verification. Four different heat transfer mechanisms were identified: corner, core acceleration, chimney and in-flow effects. The competitions of these mechanisms depending on the fin geometries and the Prandtl number resulted in complex variations of the heat transfer. The results showed the heat transfer enhancement of maximum 6.9 % for Pr = 2014, L = 0.1 m and H = 0.015 m and impairment up to 47 % for Pr = 0.7, L = 0.1 m and H = 0.015 m compared with that of a flat plate with the same heat transfer area and baseplate length. 相似文献
|