共查询到20条相似文献,搜索用时 31 毫秒
1.
Ferroelectric Ba0.65Sr0.35TiO3(BST) thin films on the Pt/Ti/SiO2/Si substrate have been successfully prepared by sol-gel. Such films have approximately 300 nm thicknesses with a remnant polarization of about 2.95 μC/cm2 and a coercive field of about 21.5 kV/cm. The investigations of X-ray diffraction and atomic force microscopy show that the BST films annealed at 650 °C exhibit a tetragonal structure and that the films dominantly consist of large column or grains of about 89 nm in diameter. The curves of the temperature dependence of dielectric coefficient in different frequencies display the curie transition at the temperature around 23 °C. The dielectric loss tangent of BST thin films at 100 kHz is less than 0.04. As a result,the BST thin films are more applicable for fabrication of infrared detector compared with the BST thin films reported previously. 相似文献
2.
Structural and Electrical Characters of Ba0.6Sr0.4TiO3/La0.5Sr0.5CoO3 Thin Films by Plus Laser Deposition
下载免费PDF全文
![点击此处可从《电子科技学刊:英文版》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Epitaxial Ba0.6Sr0.4TiO3 (BST) thin films were deposited on LaAlO3 (LAO) substrates with the conductive metallic oxide La0.5Sr0.5CoO3 (LSCO) film as a bottom electrode by pulsed laser deposition (PLD). X-ray diffraction ~2 and Ф scan showed that the epitaxial relationship of BST/LSCO/LAO was [001] BST//[001] LSCO//[001] LAO. The atomic force microscope (AFM) revealed a smooth and crack-free surface of BST films on LSCO-coated LAO substrate with the average grain size of 120 nm and the RMS of 1.564 nm for BST films. Pt/BST/LSCO capacitor was fabricated to perform CapacitanceVoltage measurement indicating good insulating characteristics. For epitaxial BST film, the dielectric constant and dielectric loss were determined as 471 and 0.03, respectively. The tunabilty was 79.59% and the leakage current was 2.6310-7 A/cm2 under an applied filed of 200 kV/cm. Furthermore, it was found that epitaxial BST (60/40) films demonstrate well-behaved ferroelectric properties with the remnate polarization of 6.085 C/cm2 and the coercive field of 72 kV/cm. The different electric properties from bulk BST (60/40) materials with intrinsic paraelectric characteristic are attributed to the interface effects. 相似文献
3.
溶胶-凝胶法制备外延Ba1-xSrxTiO3薄膜及其结构与性能研究 总被引:5,自引:0,他引:5
应用溶胶-凝胶技术在Pt/MgO(100)衬底上成功地制备了Ba0.65Sr0.35TiO3外延薄膜.XRD和SEM分析结果表明该薄膜在O2气氛中650℃热处理1h后,其(001)面是沿着Pt(100)和MgO(100)面外延取向生长的;薄膜表面均匀致密,厚度为260nm,平均晶粒大小为48.5nm.当测试频率为10kHz时,BST薄膜的介电常数和损耗因子分别为480和0.02.介电常数-温度关系测试结果表明sol-gel工艺制备的Ba0.65Sr0.35TiO3薄膜其居里温度在35℃左右,且在该温度下Ba0.65Sr0.35TiO3薄膜存在扩散铁电相变特征.当外加偏置电压为3V时,BST薄膜的漏电流密度为1.5×10-7A/cm2.该薄膜可作为制备新型非制冷红外焦平面阵列和先进非制冷红外热像仪的优选材料. 相似文献
4.
5.
Ming Shiahu Tsai Sun S.C. Tseung-Yuen Tseng 《Electron Devices, IEEE Transactions on》1999,46(9):1829-1838
The dielectric constant and the leakage current density of (Ba, Sr)TiO3 (BST) thin films deposited on various bottom electrode materials (Pt, Ir, IrO2/Ir, Ru, RuO2/Ru) before and after annealing in O2 ambient were investigated. The improvement of crystallinity of BST films deposited on various bottom electrodes was observed after the postannealing process. The dielectric constant and leakage current of the films mere also strongly dependent on the postannealing conditions. BST thin film deposited on Ir bottom electrode at 500°C, after 700°C annealing in O2 for 20 min, has the dielectric constant of 593, a loss tangent of 0.019 at 100 kHz, a leakage current density of 1.9×10 -8 A/cm2 at an electric field of 200 kV/cm with a delay time of 30 s, and a charge storage density of 53 fC/μm2 at an applied field of 100 kV/cm. The BST films deposited on Ir with post-annealing can obtain better dielectric properties than on other bottom electrodes in our experiments. And Ru electrode is unstable because the interdiffusion of Ru and Ti occurs at the interface between the BST and Ru after postannealing. The ten year lifetime of time-dependent dielectric breakdown (TDDB) studies indicate that BST on Pt, Ir, IrO2/Ir, Ru, and RuO2/Ru have long lifetimes over ten gears on operation at the voltage bias of 2 V 相似文献
6.
高度(100)取向的BST薄膜及其高介电调谐率 总被引:2,自引:0,他引:2
用脉冲激光沉积法制备(Ba1-xSrx)TiO3(x=0.35,0.50简称BST35和BST50)介电薄膜。在650℃原位退火10min,获得高度(100)取向柱状生长的晶粒。BST35薄膜的平均晶粒尺寸为50nm,BST50薄膜的晶粒尺寸为150~200nm。在室温和1MHz条件下,BST35的最大εr和调谐率分别达到810和76%,其介电调谐率高于国内外同类文献报道的数据;BST50的εr和调谐率最大分别达到875和63%。薄膜为(100)取向生长,因为薄膜沿平面c轴极化而产生应力,在电场作用下,而获得高介电调谐率。 相似文献
7.
Thermo-Sensitive Ba0.64Sr0.36TiO3 Thin Film Capacitors for Dielectric Type Uncooled Infrared Sensors
Liang Dong Ruifeng Yue Litian Liu Xiaoning Wang Jianshe Liu Tianling Ren 《Journal of Infrared, Millimeter and Terahertz Waves》2003,24(8):1341-1349
Ba0.64Sr0.36TiO3 (BST) thin films are prepared on Pt/Ti/SiO2/Si3N4/SiO2/Si substrates by a sol-gel method. Thermo-sensitive BST thin film capacitors with a Metal-Ferroelectrics-Metal (M-F(BST)-M) structure are fabricated as the active elements of dielectric type uncooled infrared sensors. XRD are employed to analyze the crystallographic structures of the films. AFM observations reveal a smooth and dense surface of the films with an average grain size of about 35 nm. Rapid temperature annealing (RTA) process is a very efficient way to improve crystallization quality. The preferable annealing temperature is 800°C for 1 min. The butterfly shaped C-V curves of the capacitors indicate the films have a ferroelectric nature. The dielectric constant and dielectric loss of the films at 100 kHz are 450 and 0.038, respectively. At 25°C, where the thermo-sensitive capacitors work, the temperature coefficient of dielectric constant (TCD) is about 5.9 %/°C. These results indicate that the capacitors with sol-gel derived BST thin films are promising to develop dielectric type uncooled infrared sensors. 相似文献
8.
采用溶胶一凝胶法在Pt/Ti/SiO2/Si衬底上制备了钛酸锶钡/铋锌铌多层复合薄膜样品.研究了不同退火温度下多层复合薄膜的结构、微观形貌及介电性能.结果表明:在退火温度高于700℃时,所得复合薄膜中会出现立方焦绿石结构的铋锌铌和钙钛矿结构的钛酸锶钡.750℃退火处理得到的多层复合薄膜,表面致密,无裂纹,其相对介电常数... 相似文献
9.
10.
Epitaxial Ba0.6Sr0.4TiO3 (BST) thin films were deposited on LaAlO3 (LAO) substrates with the conductive metallic oxide La0.5Sr0.5CoO3 (LSCO) film as a bottom electrode by pulsed laser deposition (PLD). Xray relationship of BST/LSCO/LAO was [001] BST//[001]LSCO//[001] LAO. The atomic force microscope (AFM)revealed a smooth and crackfree surface of BST films on LSCOcoated LAO substrate with the average grain size of 120 nm and the RMS of 1.564 nm for BST films.Pt/BST/LSCO capacitor was fabricated to perform CapacitanceVoltage measurement indicating good insulating characteristics. For epitaxial BST film, the dielectric constant and dielectric loss were determined as 471 and 0.03, respectively. The tunabilty was 79.59% and the leakage current was 2.63×107 A/crm2 under an applied filed of 200 kV/cm. Furthermore, it was found that epitaxial BST (60/40) films demonstrate wellbehaved ferroelectric properties with the remnate polarization of 6.085 μC/cm2 and the coercive field of 72 kV/cm. The different electric properties from bulk BST (60/40)materials with intrinsic paraelectric characteristic are attributed to the interface effects. 相似文献
11.
Ching-Chich Leu Shih-Hsiung Chan Haur-Ywh Chen Ray-Hua Horng Dong-Sing Wuu Luh-Huei Wu Tiao-Yuan Huang Chun-Yen Chang Simon Min Sze 《Microelectronics Reliability》2000,40(4-5)
The effects of the O2 plasma treatment on the electric and dielectric characteristics of Ba0.7Sr0.3TiO3 (BST) thin films were investigated. As a result of the exposure of the as-deposited or the annealed BST films to the O2 plasma, the leakage current density of the BST films can be improved. Typically, the leakage current density can decrease by three orders of magnitude as compared that of the non-plasma treated sample at an applied voltage of 1.5 V. It is found that the plasma treatment changes the surface morphology. The capacitance of the BST films was reduced by 10%30%. The improvement of the leakage current density and the reduction of a dielectric constant for the plasma treated samples could be attributed to the reduction of carbon contaminations of BST thin films. The 10 year life time of the time-dependent dielectric breakdown (TDDB) studies indicates that all the samples have a life time of over 10 years of operation at a voltage bias of 1 V. 相似文献
12.
13.
Byoung Taek Lee Wan Don Kim Ki Hoon Lee Han Jin Lim Chang Seok Kang Horii Hideki Suk Ho Joo Hong Bae Park Cha Young Yoo Sang In Lee Moon Yong Lee 《Journal of Electronic Materials》1999,28(4):L9-L12
The influence of two-step deposition on the electrical properties of sputtered (Ba,Sr)TiO3 thin films was investigated. BST thin films with thickness 40 nm were deposited by a simple two-step radio frequency-magnetron
sputtering technique, where the BST thin film consisted of a seed layer and a main layer. The dielectric constant was strongly
dependent on the thickness of seed layer, but there was no dependence on deposition temperature of the seed layer. For a 2
nm seed layer, the dielectric constants were higher by about 29% than those of single-step BST thin films due to higher crystallinity
and the leakage current was nearly the same as that of a single-step sample in bias voltage from −2 to 2.5 V. However, an
improvement of the dielectric constant was not observed for samples having above 4 nm thick seed layers. A 40 nm thick BST
film with 2 nm thick seed layer deposited by a two-step method exhibited a SiO2 equivalent thickness of 0.385 nm and a leakage current density of 2.74 × 10−8A/cm2at+1.5V after post-annealing under an atmosphere of flowing N2 for 30 min at 750°C. 相似文献
14.
The dielectric and microwave properties of Ba0.6Sr0.4TiO3 (BST60) thin films with a MgO buffer layer deposited on Al2O3 substrates were investigated. Insertion of the MgO buffer layer is demonstrated to be an effective approach to fabricate low-dielectric-loss BST thin films. x-Ray pattern analysis indicates that the thin films exhibit good crystalline quality with a pure perovskite phase and that insertion of the MgO buffer layer does not change the crystal structure of BST. The nonlinear dielectric properties of the BST films were measured by using an interdigital capacitor (IDC). At room temperature, the tunability of the BST films with a MgO buffer layer was 24.1% at a frequency of 1 MHz with an applied electric field of 80 kV/cm. The dielectric loss of the BST thin films is only 0.005 to 0.007 in the frequency range from 20 Hz to 2 MHz, the same as for BST films prepared on single-crystal MgO substrates. The microwave dielectric properties of the BST thin films were also measured by a vector network analyzer from 50 MHz to 10 GHz. 相似文献
15.
Tsai M.S. Tseng T.Y. 《Components and Packaging Technologies, IEEE Transactions on》2000,23(1):128-135
The influence of bottom electrodes (Pt, Ir, Ru) on the degradation of (Ba,Sr)TiO3 (BST) thin films under dc stress conditions was investigated. The current-time (I-t) and current-voltage (I-V) measurement results indicated that the BST thin films deposited on Ru have faster degradation than those deposited on Pt and Ir. The degradation was considered to be caused by the deterioration of the Schottky-barrier. Under dc stress conditions, the dielectric relaxation current in the BST dielectric films probably enhances the deterioration. The breakdown time was found to be approximated by an exponential function of an electric field [tB=α exp(-βE)] for dc stress. The value of the exponential factor β for BST deposited on Pt and Ir was about a quarter of that for BST deposited on Ru. The different value of β observed under dc stress indicates that the degradation of BST on Ru would be more serious than on Pt and Ir. The ten years lifetime of time-dependent dielectric breakdown (TDDB) studies indicate that BST on Pt, Ir and Ru have longer lifetime over ten years for operation at the voltage bias of 1 V 相似文献
16.
17.
18.
Hongtao Xu Pervez N.K. Hansen P.J. Shen L. Keller S. Mishra U.K. York R.A. 《Electron Device Letters, IEEE》2004,25(2):49-51
Ba/sub x/Sr/sub 1-x/TiO/sub 3/ (BST) thin films have large dielectric constants that can be varied by as much as a factor of 3 with an applied field, making them attractive for radio frequency (RF) circuits as small-area ac bypass/dc blocking capacitors, or high-power varactors. However, BST must be deposited at relatively high temperatures in an oxidizing environment, presenting significant integration challenges for MMIC applications. This letter describes the successful integration of BST films on AlGaN/GaN high electron-mobility transistor (HEMT) monolithic microwave integrated circuits on sapphire substrates. A sacrificial SiO/sub 2/ buffer layer is used to protect the underlying AlGaN during the RF magnetron sputtering of the BST film at an elevated temperature, with a carefully controlled heater ramp rate to avoid degradation of the ohmic contacts on the HEMT. 相似文献
19.
20.
We have been developing a monolithic microbolometer technology for uncooled infrared focal plane arrays (Uncooled IRFPAs) along the route from fabricating pixels of thin-film dielectric bolometers on micromachined silicon substrates. In the paper, the thermal-sensitive barium strontium titanate (BST) thin film capacitors for that objective prepared by Radio-Frequency Magnetron sputtering have been investigated focusing on the condition of fabrication of BST thin films. Capacitor-Temperature properties of the thermal-sensitive BST thin film capacitors have been measured with impedance analyzer. According to the Capacitor-temperature curves, these indicated that the temperature coefficient of dielectric constant (TCD) within the ambient temperature region highly depended on the Radio-Frequency Magnetron sputtering condition of fabrication of BST thin films. BST thin film capacitors with TCD-value more than 21%/K have been prepared on the optimized condition. That is a good base for preparation of dielectric bolometer mode of uncooled IRFPAs. 相似文献