Change of pressure in wells opening up highly inhomogeneous porous collectors

We consider a generalized averaged model of the filtration of a weakly compressible liquid in a highly inhomogeneous medium. We construct an approximate analytical solution of the problem that describes the change in the pressure field around a well in a circular bed. We investigate the effect of the parameters of a highly inhomogeneous bed on the form of the well pressure stabilization curve.Notation c Euler constant - D diameter of a weakly permeable block - Ei symbol of the integral exponential function - h bed thickness - K(t), K _* (t) kernels of integral operators - K ₀ symbol of the Macdonald function - k permeability - P pressure - Q constant discharge of the well - r radius - s complex variable - t time - t _* time of the relaxation of a weakly permeable block - U(r, t) reduced pressure - U(t) function taking into account the internal flow of the fluid from one medium to the other - fraction of the volume of the bed per block - ^* reduced coefficient of compressibility - characteristic scale of inhomogeneity - ratio of piezoconductivities of a block and a crack - Laplace operator - piezoconductivity - ratio of elastic amounts of weakly permeable blocks and systems of cracks - viscosity of the fluid - dimensionless time - integration variable. Indices: 1, weakly permeable blocks - 2 system of cracks - 0 initial value - w value in the well - e effective value - overbar Laplace transform Institute for the Problems of Oil and Gas of the Russian Academy of Sciences, Moscow. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 68, No. 3, pp. 444–450, May–June, 1995.     

Coaxial variable-length resonator for determining the electromagnetic parameters of materials at normal and higher temperatures

Conclusions It is possible by means of the above resonator, according to our analysis and in the absence of air gaps between the sample and the line, to evaluate the real components and of permeability and permittivity respectively in the range of 2 to 100 with an error between ±3% and ±10% in the temperature range from room temperature to +400°C, and the imaginary components and (for tan and tan in the range of 0.001 to 2) with an error of 7 to 20% over the same temperature range.     

Motion of a thermal wave front in a nonlinear medium with absorption

We study the evolution of a thermal perturbation in a nonlinear medium whose thermal conductivity depends on the temperature and the temperature gradient according to a power law.Notation u temperature - k coefficient of thermal conductivity - t time - x spatial variable - x₊ a point on the thermal wave front - a ² generalized coefficient of thermal diffusivity - , , , and s parameters of the process - (x^s) Dirac delta-function - B[, ] a beta function - v(, x), (t) auxiliary functions - A, C, T_o, T_m, T*, R, r, p, and _m constants and parameters Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 4, pp. 728–731, October, 1980.     

Influence of stabilizers on Na-β′′-Al2O3 phase formation in Li2O(MgO)-Na2O-Al2O3 ternary systems

The influences of stabilizers on - and -Al2O3 phase formations in Li2O(MgO)-Na2O-Al2O3 systems were investigated. When stabilized with 4MgCO3Mg(OH)25H2O, most of the -Al2O3 phase formed below 1200°C and further - to -Al2O3 transformation with an increase of temperature was not observed. On the other hand, when stabilized with Li2CO3,-Al2O3 formation occurred by two steps. First, -Al2O3 was partly formed below 1200°C, and, second, noticeable transformation from -Al2O3 to -Al2O3 occurred at higher temperature ranges. It was shown that transient eutectic liquid in the Li2O-Na2O-Al2O3 system promoted the - to -Al2O3 transformation at higher temperatures. Uniform distribution of both Mg2+ and Li+ stabilizing ions enhanced -Al2O3 formation at low temperatures. In the Li-stabilized systems, however, homogeneous distribution of Li+ ions hindered both the formation of transient eutectic liquid and the second - to -Al2O3 phase transformation at high temperatures.     

The constitution of the Ni-Al-Ru system

The constitution of the Ni-Al-Ru system has been investigated in the range 0 to 50 at% Al. Isothermal sections at 1523 and 1273 K have been determined using microstructural observations, electron probe microanalysis and X-ray diffraction. The phases present were: nickel-based solid solution (); (based on Ni₃Al); solid solutions based on NiAl and RuAl, respectively (designated ₁ and ₂), and ruthenium-based solid solution (Ru). The maximum solubility of Ru in was 5 at%. ₁, and ₂ show extensive range of solubilities, namely up to 20at% Ru in ₁ and up to 25 to 35 at% Ni in ₂. Three-phase equilibrium between , ₂ and (Ru) existed at 1523 and 1273 K. Also at 1523 K, three-phase equilibria existed between , and ₁ and ,₁ and ₂, while at 1273 K, the equilibria were between , ₁,₂ and , , ₂ indicating the occurrence of a reaction +₁, +₂ at a temperature between 1523 and 1273 K. Liquidus features have been deduced from data on as-solidified structures. Lattice parameter data and hardnesses are also reported.     

Hydraulic characteristics and vapor content in a channel with boiling of a liquid underheated up to the saturation temperature

A method is proposed for calculating the hydraulic characteristic and vapor content in a channel with underheated boiling.Notation H heated length of channel - d_t thermal diameter - d_h hydraulic diameter - _t thermal perimeter - _h hydraulic perimeter - s through cross section - N power of channel - q heat flux - G weight flow rate - W velocity - coefficient of heat transfer - t, T temperatures - t temperature difference - i enthalpy - P pressure - P pressure drop - x weight vapor content - volumetric vapor content - C_p heat capacity - r heat of vaporization - coefficient of thermal conductivity - coefficient of surface tension - liquid density - vapor density - g acceleration of gravity - _o coefficient of friction of liquid against the channel wall - shear stress - density of two-phase medium averaged over a channel cross section - dynamic viscosity Indices s on saturation line - en at channel entrance - l liquid - v vapor - w wall Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 37, No. 5, pp. 784–792, November, 1979.     

Anisotropic spin diffusion and multiple spin echoes in3He-4He solutions

We propose a ₁-t₁-₂ pulse-NMR experiment to detect the spin-diffusion anisotropy, =D-D, in degenerate spin-polarized³He-⁴He mixtures, where D and dare the transverse and longitudinal spin diffusion coefficients. In such an experiment the nonlinearity of the dynamics produces multiple spin echoes (MSE). At the ³He concentration x₃ 4% the spinrotation parameter vanishes (M 0), so that the nonlinearity of the equations of motion is entirely due to the anisotropy. In this situation, detection of MSE amounts to observation of D. For slight anisotropy, i.e. D/D 0.25, we use a perturbation scheme similiar to that developed by Einzel et al. (in that case, for small M and small demagnetizing field) to calculate the second and third echo heights. For larger anisotropy we numerically calculate the echo heights. We find that for D/D = 0.5 the heights are 2 % of the first echo, and should be detectable. The (₁, ₂) tip-angle dependence of the D echoes is different from that of the M and demagnetization echoes, and furthermore, they occur at right angles to these echoes (in spin space). Thus, even when small spin-rotation and demagnetization effects are present, the ₁-t₁-₂ experiment provides a sensitive means of detecting the anisotropy.     

Die Entwicklung von Längswirbeln in zeitlich anwachsenden Grenzschichten an konkaven Wänden

Zusammenfassung Messungen des Anwachsens von Längswirbeln in zeitlich anwachsenden Grenzschichten an konkav gekrümmten Wänden (Görtler-Taylor-Wirbel) ergaben drei deutlich getrennte Bereiche: Es traten zunächst Wirbel mit der Wellenläge 0,9 auf (=Grenzschichtdicke, =Höhe einer Zelle, die zwei gegensinnig drehende Wirbel enthält). Je nach Größe der mit der Verdrängungsdicke ₁ der Grenzschicht gebildeten Reynolds-Zahl erschienen dann kurze Zeit später Wirbel mit 2,5, wenn war. Im Bereiche dagegen traten stattdessen bei den hier durchgeführten Versuchen immer Wirbel mit der Wellenlänge 6,5 auf. Bei werden die ersten Tollmien-Schlichting-Wellen mit der Wellenlänge _TS 6· angefacht. In ihren wandnahen Bereichen der Wellentäler könnten sich dann die oben genannten Längswirbel der Wellenlänge 6,5· ausbilden, die die zwei-in eine dreidimensionale Störung allseits gleicher Größenordnung verwandeln können.

---

The development of longitudinal vortices in boundary layers growing with time along concave walls

Summary Measurements of the growth of longitudinal vortices in boundary layers growing with time along concave walls (Görtler-Taylor vortices) rendered three distinctly separated regions. First, vortices with a wave-length 0.9 appeared (-boundary layer thicness, =height of a cell containing two counterrotating vortices). Then, depending on the Reynolds number R _{a 1}/v ₁=displacement thickness), vortices with 2.5 appeared shortly afterwards, provided . In the region , however, the wave-length was 6.5. For the first Tollmien-Schlichting waves with _TS 6 were excited. In the wave-throughs close to the wall the abovementioned longitudinal vortices with wave length 6.5 may then be formed. This might transform the two-dimensional into a three-dimensional flow of equal order of magnitude in all directions.

---

Zeichenerklärungen R _a Innenradius - Re _a Reynolds-Zahl gebildet mit dem InnenradiusR _a - Reynolds-Zahl gebildet mit der Verdrängungsdicke ₁ - kritische Taylor-Zahl - h Standhöhe der Flüssigkeit im Zylinder - t Zeit - z Anzahl - Steigungswinkel der Geraden - Grenzschichtdicke - ₁ Verdrängungsdicke - Wellenlänge (enthält ein gegensinnig rotierendes Längswirbelpaar) - v kinematische Zähigkeit - Winkelgeschwindigkeit Indizes K Knickpunkt der Geradensteigung - L unterhalb des Knickpunktes der Geradensteigung - TS Tollmien-Schlichting - e Einsatz der Wirbelentstehung     

Heat conduction in a multilayer composite wedge

A new method for analytically solving a problem of steady-state heat conduction for multilayer composite wedge-shaped bodies is suggested based on a generalization of the integral Mellin transform.Notation T temperature - _rr, thermal conductivity coefficients - thickness of composite material layers (1) - N₁(), N ₂ ⁽¹⁾ (), N ₂ ⁽²⁾ () auxiliary local functions from the rapid variable =r/ - m(r, p) auxiliary function entering the core of the generalized integral Mellin transform - ₀ half of the wedge aperture angle Moscow Institute of Chemical Engineering. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 64, No. 4, pp. 487–491, April, 1993.     

The tensile strength and ductility of continuous fibre composites

The plastic instability approach has been applied to the tensile behaviour of a continuous fibre composite. It is shown that the combination of two components with different strengths and degrees of work-hardening produces a new material with a new degree of work-hardening, which may be determined by the present analysis. Expressions for the elongation at rupture and the strength of a composite have been obtained and the results of the calculation are compared with some experimental data.List of symbols V _f volume fraction of fibres in composite - , , true strain of fibre, matrix and composite - s true stress - , , nominal stress on fibre, matrix and composite - _*, _*, _* critical stress of fibre, matrix and composite (ultimate tensile strength) - _*, _* critical strain of separate fibre and matrix - _* critical strain of composite - Q external load - A cross-sectional area - A ₀ initial value of area     

Microstructure and properties of supersaturated ZA27 alloy during natural ageing

The decomposition of the supersaturated solid solution of ZA27 alloy at room temperature has been investigated by X-ray diffraction, TEM and mechanical properties testing. Based on the results obtained, both continuous precipitation and cellular reaction occur during the decomposition process. The continuous precipitation follows the sequence: ₁ + spherical GP zones ₂ + elliptical GP zones ₃ + R + . The cellular reaction can be written: + + . The properties of the alloy depend on the microstructure. After 1 month of ageing, a series of changes of microstructure have taken place. The properties of the alloy are: _b=500 MPa, =13%,H _v=148.     

Transport in the low-temperature limit of a Landau Fermi liquid

The Boltzmann equation for Landau quasiparticles is solved for T 0 by a specialization of a method discussed by Sykes and Brooker. The quasiparticle distribution function is expanded in Legendre polynomials, assuming a boundary condition which imposes axial symmetry, and even-order terms are assumed to relax together with relaxation time _e , odd-order terms with relaxation time _o . By letting wavelength , with finite, one obtains a first-sound solution, and by lettingT 0, and then , one obtains a zero-sound solution. When these solutions are used to calculate the pressure, it is found that the first-sound solution is consistent with hydrodynamics, exhibiting viscosity = _s , while the zero-sound velocityc ₁=[^–1(B₁+4/3_s)]^1/2, so that phenomenologically zero-sound propagates like a longitudinal elastic wave in a glass. A higher zero-sound mode is also predicted, but is heavily damped. The heat flux is calculated and found to obey Vernotte's equation, which contains an intertial term, added to Fourier's law, that becomes significant asT 0.     

Phase decomposition in extruded Zn-Al based alloy

Ageing characteristics of an extruded eutectoid Zn-Al based alloy were investigated using X-ray diffraction and scanning electron microscopy techniques. The extruded alloy consisted of Al rich phase and Zn rich _E and phases. The original cast eutectoid Zn-Al alloy was extruded at 250 °C. Both supersaturated _s and _s phase decomposed during extrusion and appeared as fine and coarse lamellar structures. The _E and phases particles formed in the original interdendritic region. It was found that two Zn rich phases _E and decomposed sequentially during ageing at 170, 140 °C. The decomposition of the _E phase occurred as a discontinuous precipitation in the early stage of ageing and the decomposition of the phase took place in a four phase transformation: + T + in the prolonged ageing. Two typical morphologies of the decomposition of the Zn rich phases _E and were distinctive in back-scattered scanning electron microscopy.     

Thermal conductivity of hydrocarbons in the naphthene group under high pressures

The thermal conductivity of hydrocarbons in the naphthene group has been experimentally determined. An equation is now proposed for calculating the thermal conductivity over the given temperature and pressure ranges.Notation thermal conductivity - ₂₀ and ₃₀ values of the thermal conductivity at 20 and 30°C, respectively - t₀,P₀ thermal conductivity at t₀, p₀ - _t p thermal conductivity at temperature t and under pressure P - change in thermal conductivity - P pressure - P_melt melting pressure - P₀ atmospheric pressure - t₀ 20°C temperature - T, t temperature - T_cr critical temperature - temperature coefficient of thermal conductivity - ₂₀ temperature coefficient of density - density - ₂₀ density at 20°C - _cr critical density - M molar mass - =T/T_cr referred temperature - v specific volume - v₀ specific volume at 20°C - v change in specific volume - _{3 0} a coefficient - B (t) a function of the temperature - S a quadratic functional - W_i, weight of the i-th experimental point - _i error of the i-th experimental value of thermal conductivity - B _{y, =0.6} value of B (t) at T = 0.6T_cr - B = B (t)/B_{, =0.6} referred value of coefficient B (t) Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 41, No. 3, pp. 491–499, September, 1981.     

o′-β′ sialon ceramics

Powders of Si₃N₄, Al₂O₃ and SiO₂ were mixed with Y₂O₃ as sintering aid and hot-pressed to form o- sialon. During sintering, the o phase preferentially precipitated in the temperature region of 1550 to 1600 °C, and the phase precipitated at temperatures of 1700 °C and above. The resultant microstructure consisted of dual phases of o and . The mechanical properties of o- sialon were improved with increasing amount of the phase. When SiO₂ required for the formation of the o phase was all included in the grain boundary phase, o- sialon exhibited a three-point bending strength as much as 1400 MPa. The oxidation resistance of o- sialon is expected to improve due to the presence of the o phase, but actually was not so good due to the presence of the grain-boundary glassy phase and impurities.     

Thermal stresses in a thin circular disc of orthotropic material due to an instantaneous point heat source

Summary In this paper, we have analysed the transient plane thermal stress problem of a circular disc of orthotropic material with instantaneous point heat source. The variation of with time along different radius vectors is exhibited graphically and compared with that of the isotropic case.

---

Wärmespannungen in einer dünnen Kreisscheibe aus orthotropem Material zufolge einer punktförmigen instantanen Wärmequelle

Zusammenfassung In dieser Arbeit wurde das instationäre ebene Wärmespannungsproblem einer Kreisscheibe aus orthotropem Material zufolge einer punktförmigen instantanen Wärmequelle untersucht. Die Veränderung von über die Zeit für verschiedene Radien ist graphisch dargestellt und wird mit dem isotropen Fall verglichen.

---

Nomenclature r, polar coordinates - T temperature rise - ² ratio of conductivities - ² thermal diffusivity in -direction - J _n Bessel function ofn-th order - t time - p introduced in equation (2) - h heat transfer coefficient - a radius of circular disc - f(r, ) temperature distribution at initial state - r ₀, ₀ a point on the disc - T ₀ strength of point heat source - Dirac delta function - F stress function in two dimensions - ₁, ₂ coefficient of thermal expansion - a ₁₁,a ₁₂,a ₂₂,a ₆₆ elastic constants With 9 Figures     

High-frequency dielectric properties of Mg-Al-Si,Ca-Al-Si and Y-Al-Si oxynitride glasses

Recently developed coaxial line techniques [1] have been used to determine, at room temperature, the values of the real () and imaginary (') parts of the dielectric constants for some Mg-Al-Si, Ca-Al-Si and Y-Al-Si oxynitride glasses over the frequency range 500 MHz to 5 GHz. The frequency dependencies of and ' are consistent with the universal law of dielectric response in that (-_t8)^(n–1) and '^(n–1) for all glass compositions; the high experimental value of the exponent (n=1.0±0.1) suggests the limiting form of lattice loss [2] situation. In this frequency range, as previously reported [3] at longer wavelengths, the addition of nitrogen increases the dielectric constant, (); in both the oxide and oxynitride glasses is also influenced by the cation, being increased with cation type in the order magnesium, yttrium, calcium as at lower frequencies.     

Evolution of transient thermal processes in layer counterflow apparatuses and heat exchangers

Results are given of an analytic investigation of transient processes inside counterflow apparatuses and heat exchangers with temperature disturbance in one of the heat carriers at the entry to the apparatus.Notation =(t–t₀)/(T₀–t₀),=(T–t₀)/(T₀ s-t₀) relative temperatures - t, T temperatures of material and gas respectively - t₀, T₀ same for the initial state - Z=[ _Vm₁/c(1–w/w_g)] [–(y₀–y)/w_g] dimensionless time - m₁=1/(1+Bi/) solidity coefficient - B₁=( _FR/) Biot number - _{F V} heat-exchange coefficients referred to 1 m² surface and 1 m³ layer - R depth of heat penetration in a portion - portion heat conductivity coefficient - shape coefficient (=0 for a plate,=1 for a cylinder,=2 for a sphere) - c, C_g heat capacities of material and gas respectively - , _g volumetric masses - w, W_g flow velocities of material and gas - y distance from the point of entry to the heating heat carrier - y₀ heat-exchanger length - Y= _Vm₁y/W_gC_{g g} dimensionless coordinate - m=cw/C_g– _gW_g water equivalent ratio Deceased.Translated from Inzhenerno-Fizicheskii Zhurnal, vol. 20, No. 5, pp. 832–840, May, 1971.     

On a simple wave approximation of a set of linear dispersive wave equations

Summary The validity of an approximation ₀ of one of the solutions of a set of two linear coupled dispersive wave equations has been discussed. ₀ is the solution of a linear Korteweg-de Vries equation and satisfies the same initial condition as . It is shown that for square integrable solutions having a spectral range not exceeding [–, ] the approximation is useful if ^{5 2}t«1 in the sense that –₀(t)« (t)(L ₂ -norm). is a measure for the dispersion. The approximation fails in that sense ast . Some remarks to a similar nonlinear problem are made.     

Response of a spinning liquid column to pitch excitation

Summary The response of a solidly rotating liquid bridge consisting of inviscid liquid is determined for pitch excitation about its undisturbed center of mass. Free liquid surface displacement and velocity distribution has been determined in the elliptic (>2₀) and hyperbolic (<2₀) excitation frequency range.List of symbols a radius of liquid column - h length of column - I ₁ modified Besselfunction of first kind and first order - J ₁ Besselfunction of first kind and first order - r, ,z cylindrical coordinates - t time - u, v, w velocity distribution in radial-, circumferential-and axial direction resp. - mass density of liquid - free surface displacement - velocity potential - ₀ rotational excitation angle - ₀ velocity of spin - forcing frequency - _1n natural frequency - surface tension - acceleration potential - for elliptic range >2₀ - for hyperbolic range >2₀