共查询到20条相似文献,搜索用时 406 毫秒
1.
本文讨论了BGA封装器件焊接的特点,并对BGA器件焊点检测方法进行了分析。重点对常用的BGA焊点检测技术——X射线检测进行研究,分析了X射线检测用于BGA焊点检测的原理,探讨了该方法的优点和待改进的地方。深入分析了自动X射线检测用于BGA焊点检测的数字图像处理技术,基于数字图像处理技术,详细阐述了从BGA检测图像预处理至BGA焊点缺陷检测的整个过程及其涉及的关键技术。 相似文献
2.
3.
20MnTiB钢螺栓断裂失效分析 总被引:2,自引:0,他引:2
应用扫描电子显微镜、光学显微镜、显微硬度仪和电子探针X射线显微分析仪,对发射架20MnTiB高强度螺栓断裂件的金相组织、显微硬度、断口微观形貌和合金元素分布状态进行了分析。结果表明,断裂螺栓金相组织正常,力学性能符合技术要求;螺栓断裂失效是由于在螺栓根部存在因加工不当产生的初始裂纹,在初始裂纹尖端的应力集中和露天使用环境中水介质的共同作用下,螺栓发生应力腐蚀开裂。应力腐蚀开裂的方式是阳极溶解型。 相似文献
4.
5.
6.
成功地研制了将软X射线引入大气中的氮化硅窗口。根据具体数据,对大气环境下软X射线接触成像的水窗软X射线衰减进行了估算;给出成像实验结果并观察到了氮化硅膜上的微粒图像叠加在样品图像上的现象。所得结果与理论估算相一致。即使用3.2nm的软X射线时,同一样品在大气环境中所需的曝光量约为真空中的两倍。这些结果将十分有益于大气环境下的软X射线接触显微术及软X射线扫描透射显微术的研究。 相似文献
7.
成功地研制了将软X射线引入大气中的氮化硅窗口。根据具体数据。对大气环境下软X射线接触成像的水窗软X射线衰减进行了估算;给出成像实验结果并观察到氮化硅膜上的微粒图像叠加在样品图像上的现象。所得结果与理论估算相一致。即使用3.2nm的软X射线时,同一样品在大气环境中所需的曝光量约为真空中的两倍。这些结果将十分有益于大气环境下的软X射线接触显微术及软X射线扫描透射显微术的研究。 相似文献
8.
9.
10.
《理化检验(物理分册)》2016,(7)
为了纪念X射线粉末衍射发现一百年,对其一百年来的发展与应用进行了概括和总结。主要包括以下3个方面的内容:决定X射线粉末衍射应用深度和广度的试验设备的发展,特别是高速度电子计算机和高强度光源的作用;X射线粉末衍射研究物质结构的3个方面(多晶聚集态结构、表面与薄膜结构及晶体结构);X射线粉末衍射近年发展的新技术(系列X射线晶体学、原位与极端条件下的粉末衍射、时间分辨粉末衍射、微区粉末衍射、三维X射线衍射显微术、粉末衍射与电子衍射的结合)。 相似文献
11.
图像处理在自动焊接中的应用和展望 总被引:12,自引:1,他引:11
图像处理技术在自动焊接领域的应用已引起国内外学者的广泛重视。通过图像传感技术获取焊接熔池直观丰富的图像信息,使用高效的图像处理算法,提取焊接熔池的特征信息,用以实现自动焊接过程质量实时传感与控制。本文综合论述了图像处理技术在自动焊接中的应用原理、数字图像的采集方法、数字图像的特征信息定义、广义数字图像处理技术及其对自动化焊接理论研究和实践应用的推动作用。通过总结图像处理技术的研究和应用现状,综合分析了图像处理技术在现代焊接技术中发展和应用的前景。 相似文献
12.
13.
利用Matlab开发平台的炉膛火焰图像温度检测方法 总被引:4,自引:0,他引:4
介绍了目前炉膛火焰检测系统的技术特性及用于火焰检测的数字图像处理技术。通过对炉膛火焰温度的CCD数字图像检测方法可行性的分析,设计了用于监测炉膛温度面分布的试验系统;通过火焰图像象素RGB值与温度的对应关系,建立了火焰图像的温度场曲线,通过原理性试验初步验证了该技术的可行性。 相似文献
14.
《NDT International》1988,21(6):407-410
Film-based X-ray tomography and digital image processing have been used to investigate an inhomogeneous object of non-circular cross-section. The feasibility of using digital image processing to compensate for the poor contrast resolution inherent in film-based tomography has been demonstrated. 相似文献
15.
红外线彩色照相有普通彩色照相和黑白红外线照相所不具备的优异性,但是也存在一些无法克服的缺点。为此,根据红外线彩色照相的感光原理和色彩再现过程,利用计算机技术和Photoshop 7.0图像处理软件,对数码照相机拍摄的数码彩色图像和红外线图像进行合并,生成新的数码红外线彩色合成图像,并通过试验阐述操作步骤和方法。最后,对合成图像的色彩再现结果进行分析,说明合成图像与红外线彩色照相的色彩效果是相同的,同时,指出在文件检验中的应用。 相似文献
16.
17.
目的:对X线乳腺摄影系统进行质量控制与评价。方法:结合《乳腺摄影质量标准法规》标准对200例实施质量控制前后的数字化x线乳腺摄影的图像资料进行评价,得出两组图像各自的甲级片和非甲级片率,并分析非甲级片的产生原因。结果:甲级片率由实施质量控制前的75.5%提高至质量控制后的91%,数字化x线乳腺摄影的图像质量得到显著提高。结论:注意摄影前的准备工作、精心设计摆位技巧、适当加压以及曝光条件的正确选择及像后优化处理能提高照片图像质量,更好地显示病灶,从而辅助诊断。 相似文献
18.
Studies on photoelasticity have been conducted by many researchers in recent years, and many equations for photoelastic analysis based on digital images were proposed. While these equations were all presented by the light intensity emitted from the analyzer, pixel values of the digital image were actually used in the real calculations. In this paper, a proposal of using relative light intensity obtained by the camera response function to replace the pixel value for photoelastic analysis was investigated. Generation of isochromatic images based on relative light intensity and pixel value were compared to evaluate the effectiveness of the new approach. The results showed that when relative light intensity was used, the quality of an isochromatic image can be greatly improved both visually and quantitatively. We believe that the technique proposed in this paper can also be used to improve the performance for the other types of photoelastic analysis using digital images. 相似文献
19.
《Journal of Modern Optics》2013,60(11):1359-1365
Coded-aperture imaging is a two step imaging process where we here term the intermediate, coded, image the superposition image. The space-bandwidth product (SBWP = number of pixels) of this superposition image is generally much larger than that of the object. This fact leads to sometimes unnecessarily large processing arrays in digital decoding, or unnecessarily stringent specifications for optical decoders. We present here a method of reducing the redundancy present in the superposition image, thereby reducing the SBWP required of the decoding system. We present examples from flashing tomosynthesis: an X-ray imaging technique using a point-source array as the coded ‘aperture’. 相似文献
20.
Techniques for imaging microscopic dynamic magnetic phenomena in magnetic recording heads are reviewed. Two experimental apparatus which utilize the Kerr magnetooptic effect are described. A scanning magnetooptic photometer uses the principles of confocal optical microscopy in which a focused laser spot serves as a high-resolution (~0.3 μm) probe of magnetic activity to very high frequencies (250 MHz). Magnetooptic flash photography uses the technique of stroboscopic imaging with digital image processing to provide instantaneous (10 ns exposure time) images of magnetic phenomena on a microscopic scale by utilizing a pulse laser for illumination. Results from various studies of ferrite, metal-in-gap, and thin-film magnetic recording heads using these apparatus are reviewed along with their methods 相似文献