Approximate minimum-energy multicasting in wireless ad hoc networks

A wireless ad hoc network consists of mobile nodes that are equipped with energy-limited batteries. As mobile nodes are battery-operated, an important issue in such a network is to minimize the total power consumption for each operation. Multicast is one of fundamental operations in any modern telecommunication network including wireless ad hoc networks. Given a multicast request consisting of a source node and a set of destination nodes, the problem is to build a minimum-energy multicast tree for the request such that the total transmission power consumption in the tree is minimized. Since the problem in a symmetric wireless ad hoc network is NP-complete, we instead devise an approximation algorithm with provable approximation guarantee. The approximation of the solution delivered by the proposed algorithm is within a constant factor of the best-possible approximation achievable unless P = NP.     

Minimum-energy all-to-all multicasting in wireless ad hoc networks

A wireless ad hoc network consists of mobile nodes that are powered by batteries. The limited battery lifetime imposes a severe constraint on the network performance, energy conservation in such a network thus is of paramount importance, and energy efficient operations are critical to prolong the lifetime of the network. All-to-all multicasting is one fundamental operation in wireless ad hoc networks, in this paper we focus on the design of energy efficient routing algorithms for this operation. Specifically, we consider the following minimum-energy all-to-all multicasting problem. Given an all-to-all multicast session consisting of a set of terminal nodes in a wireless ad hoc network, where the transmission power of each node is either fixed or adjustable, assume that each terminal node has a message to share with each other, the problem is to build a shared multicast tree spanning all terminal nodes such that the total energy consumption of realizing the all-to-all multicast session by the tree is minimized. We first show that this problem is NP-Complete. We then devise approximation algorithms with guaranteed approximation ratios. We also provide a distributed implementation of the proposed algorithm. We finally conduct experiments by simulations to evaluate the performance of the proposed algorithm. The experimental results demonstrate that the proposed algorithm significantly outperforms all the other known algorithms.     

Maximum-residual multicasting and aggregating in wireless ad hoc networks

Power-aware routing in wireless ad hoc networks has been extensively explored in recent years, and various routing metrics were developed for the prolongation of network lifetime. This work studies power-aware routing so as to maximize the minimum remaining energy of all nodes after routing. This routing metric, referred to as Maximum-Residual Routing, aims at maintaining the minimum remaining energy as high as possible so as to delay the fist failure time of nodes in the network. In this paper, a polynomial-time optimal algorithm is proposed for Maximum-Residual Multicasting. We then show that Maximum-Residual Aggregating is NP{\mathcal{NP}}-hard and that, unless P = NP,{\mathcal{P = NP}}, its minimization version cannot be approximated within a ratio better than (2 − ε) for any ε > 0. The proposed routing algorithm for Maximum-Residual Multicasting can be applied to existing routing protocols, especially those based on the link-state approach. The capability of the algorithm was evaluated by a series of experiments, for which we have very encouraging results in network lifetime and load balance.     

A hexagonal-tree TDMA-based QoS multicasting protocol for wireless mobile ad hoc networks

The mobile multimedia applications have recently generated much interest in wireless ad hoc networks with supporting the quality-of-service (QoS) communications. The QoS metric considered in this work is the reserved bandwidth, i.e., the time slot reservation. We approach this problem by assuming a common channel shared by all hosts under a TDMA (Time Division Multiple Access) channel model. In this paper, we propose a new TDMA-based QoS multicast routing protocol, namely hexagonal-tree QoS multicast protocol, for a wireless mobile ad hoc network. Existing QoS routing solutions have addressed this problem by assuming a stronger multi-antenna model or a less-strong CDMA-over-TDMA channel model. While more practical and less costly, using a TDMA model needs to face the challenge of radio interference problems. The simpler TDMA model offers the power-saving nature. In this paper, we propose a new multicast tree structure, namely a hexagonal-tree, to serve as the QoS multicasting tree, where the MAC sub-layer adopts the TDMA channel model. In this work, both the hidden-terminal and exposed-terminal problems are taken into consideration to possibly exploit the time-slot reuse capability. The hexagonal-based scheme offers a higher success rate for constructing the QoS multicast tree due to the use of the hexagonal-tree. A hexagonal-tree is a tree whose sub-path is a hexagonal-path. A hexagonal-path is a special two-path structure. This greatly improves the success rate by means of multi-path routing. Performance analysis results are discussed to demonstrate the achievement of efficient QoS multicasting.     

Joint scheduling and power control supporting multicasting in wireless ad hoc networks

This paper addresses the problem of power control in a multihop wireless network supporting multicast traffic. We face the problem of forwarding packet traffic to multicast group members while meeting constraints on the signal-to-interference-plus-noise ratio (SINR) at the intended receivers. First, we present a distributed algorithm which, given the set of multicast senders and their corresponding receivers, provides an optimal solution when it exists, which minimizes the total transmit power. When no optimal solution can be found for the given set of multicast senders and receivers, we introduce a distributed, joint scheduling and power control algorithm which eliminates the weak connections and tries to maximize the number of successful multicast transmissions. The algorithm allows the other senders to solve the power control problem and minimize the total transmit power. We show that our distributed algorithm converges to the optimal solution when it exists, and performs close to centralized, heuristic algorithms that have been proposed to address the joint scheduling and power control problem.     

Mobile multicasting in wireless ATM networks

Multicasting is a desired function in both wired and wireless networks. Currently, multicasting‐based applications have pervasive presence and influence in our Internet. Wireless ATM aims to support different traffic types over a high speed wireless network. In particular, traditional approaches towards multicasting in wired networks cannot be directly applied to mobile ATM networks. This includes the mechanism proposed to handle mobility in wired networks. In this paper, we address the issues behind multicasting in wireless ATM networks and the underlying mechanisms to support handoffs of both unicast and multicast connections. Through simulation, we evaluated the performance of optimal core‐based tree (CBT), late‐joined CBT, optimal source‐based tree (SBT), and late‐joined SBT during changing multicast host membership conditions. In addition, we evaluated the impact of multicast receivers' migration on the total link cost of the resultant multicast tree. Simulation results revealed that source‐based trees incur more total link costs under both dynamic host membership and receivers' migration scenarios. However, it generates less control messages than the distributed CBT and SBT approaches. This revised version was published online in June 2006 with corrections to the Cover Date.     

Lifetime maximization for multicasting in energy-constrained wireless networks

We consider the problem of maximizing the lifetime of a given multicast connection in a wireless network of energy-constrained (e.g., battery-operated) nodes, by choosing ideal transmission power levels for the nodes relaying the connection. We distinguish between two basic operating modes: In a static power assignment, the power levels of the nodes are set at the beginning and remain unchanged until the nodes are depleted of energy. In a dynamic power schedule, the powers can be adjusted during operation. We show that while lifetime-maximizing static power assignments can be found in polynomial time, for dynamic schedules the problem becomes NP-hard. We introduce two approximation heuristics for the dynamic case, and experimentally verify that the lifetime of a dynamically adjusted multicast connection can be made several times longer than what can be achieved by the best possible static assignment.     

Distributed approaches for exploiting multiuser diversity in wireless networks

In wireless fading channels, multiuser diversity can be exploited by scheduling users to transmit when their channel conditions are favorable. This leads to a sum throughput that increases with the number of users and, in certain cases, achieves capacity. However, such scheduling requires global knowledge of every user's channel gain, which may be difficult to obtain in some situations. This paper addresses contention-based protocols for exploiting multiuser diversity with only local channel knowledge. A variation of the ALOHA protocol is given in which users attempt to exploit multiuser diversity gains, but suffer contention losses due to the distributed channel knowledge. The growth rate of the sum throughput for this protocol is characterized in a backlogged system under both short-term and long-term average power constraints. A simple "fixed-rate" system is shown to be asymptotically optimal and to achieve the same growth rate as in a system with an optimal centralized scheduler. Moreover, asymptotically, the fraction of throughput lost due to contention is shown to be 1/e. Also, in a system with random arrivals and an infinite user population, a variation of this ALOHA protocol is shown to be stable for any total arrival rate, given that users can estimate the backlog.     

Capacity regions for wireless ad hoc networks

We define and study capacity regions for wireless ad hoc networks with an arbitrary number of nodes and topology. These regions describe the set of achievable rate combinations between all source-destination pairs in the network under various transmission strategies, such as variable-rate transmission, single-hop or multihop routing, power control, and successive interference cancellation (SIC). Multihop cellular networks and networks with energy constraints are studied as special cases. With slight modifications, the developed formulation can handle node mobility and time-varying flat-fading channels. Numerical results indicate that multihop routing, the ability for concurrent transmissions, and SIC significantly increase the capacity of ad hoc and multihop cellular networks. On the other hand, gains from power control are significant only when variable-rate transmission is not used. Also, time-varying flat-fading and node mobility actually improve the capacity. Finally, multihop routing greatly improves the performance of energy-constraint networks.     

Distributed simultaneous wireless information and power transfer in multiuser amplify‐and‐forward ad hoc wireless networks

This paper studies the problem of stable node matching for distributed simultaneous wireless information and power transfer in multiuser amplify‐and‐forward ad hoc wireless networks. Particularly, each source node aims to be paired with another node that takes the role of an amplify‐and‐forward relay to forward its signal to the destination, such that the achievable rate is improved, in return of some payment made to the relaying node. Each relaying node splits its received signal from its respective source into two parts: one for information processing and the other for energy harvesting. In turn, a matching‐theoretic solution based on the one‐to‐one stable marriage matching game is studied, and a distributed polynomial‐time complexity algorithm is proposed to pair each source node with its best potential relaying node based on the power‐splitting ratios, such that their utilities or payments are maximized while achieving network stability. For comparison purposes, an algorithm to enumerate all possible stable matchings is also devised to study the impact of different matchings on the source and relay utilities. Simulation results are presented to validate the proposed matching algorithm and illustrate that it yields sum‐utility and sum‐payment that are closely comparable to those of centralized power allocation and node pairing, with the added merits of low complexity, truth telling, and network stability.     

Design and implementation of multicasting for multi-channel multi-interface wireless mesh networks

Multicasting is a useful communication method in wireless mesh networks (WMNs). Many applications in WMNs require efficient and reliable multicast communications, i.e., high delivery ratio with low overhead among a group of recipients. In spite of its significance, little work has been done on providing such multicast service in multi-channel WMNs. Traditional multicast protocols for wireless and multi-hop networks tend to assume that all nodes, each of which is equipped with a single interface, collaborate on the same channel. This single-channel assumption is not always true, as WMNs often provide nodes with multiple interfaces to enhance performance. In multi-channel and multi-interface (MCMI) WMNs, the same multicast data must be sent multiple times by a sender node if its neighboring nodes operate on different channels. In this paper, we try to tackle the challenging issue of how to design a multicast protocol more suitable for MCMI WMNs. Our multicast protocol builds multicast paths while inviting multicast members, and tries to allocate the same channel to neighboring members in a bottom-up manner. By unifying fixed channels of one-hop multicast neighbors, the proposed algorithm can improve the performance such as reducing multicast data transmission overhead and delay, while managing a successful delivery ratio. In order to prove such expectation on the performance, we have implemented and evaluated the proposed solution on the real testbed having the maximum 24 nodes, each of which is equipped with two IEEE 802.11a Atheros WLAN cards.     

Accountability for wireless LANs, ad hoc networks, and wireless mesh networks [security in mobile ad hoc]

Accountability is an extremely important issue in computer and network systems. One of the goals of accountability is the capability to trace an event (e.g., the leaking of secure information or an outside attack), even after the event occurred so that the causes can be determined. This article first provides a survey of accountability with a general overview of the topic, using electronic patient records and various computer and network attacks as a model. Then, it describes and analyzes practical framework applications of accountability systems. An insurable network architecture, called A-NET is proposed. Then, an algorithm to achieve true accountable administration is proposed, namely, that an administrator's activities must be accountable. Finally, accountability for wireless LANs, ad hoc networks, and wireless mesh networks are studied.     

Rate management in multiuser detection based MAC design for ad hoc networks

We propose a framework that produces synergy between Medium Access Control (MAC) and physical layers in order to increase the users’ individual throughput in a high-capacity CDMA ad hoc network. The MAC layer supports a multiuser detection based access protocol. Users send data packets at different rates, depending on the fading channel state. The framework is based on an LMS (Least Mean Square) prediction algorithm that estimates channel gain at the physical layer. The performance of the scheme is evaluated by simulations. Multiuser detection typically triples the throughput of ad hoc networks but our prediction-based scheme further doubles this metric. The main advantage of the proposed scheme is its flexibility and efficiency in a wide range of data rates and target bit error rates. It is also well fitted to support high-quality multi-media transmissions, and to improve the performance of applications that require high quality of service (QoS).     

Design challenges for energy-constrained ad hoc wireless networks

Ad hoc wireless networks enable new and exciting applications, but also pose significant technical challenges. In this article we give a brief overview of ad hoc wireless networks and their applications with a particular emphasis on energy constraints. We then discuss advances in the link, multiple access, network, and application protocols for these networks. We show that cross-layer design of these protocols is imperative to meet emerging application requirements, particularly when energy is a limited resource.     

Robust position-based routing for wireless ad hoc networks

We consider a wireless ad hoc network composed of a set of wireless nodes distributed in a two dimensional plane. Several routing protocols based on the positions of the mobile hosts have been proposed in the literature. A typical assumption in these protocols is that all wireless nodes have uniform transmission regions modeled by unit disk centered at each wireless node. However, all these protocols are likely to fail if the transmission ranges of the mobile hosts vary due to natural or man-made obstacles or weather conditions. These protocols may fail because either some connections that are used by routing protocols do not exist, which effectively results in disconnecting the network, or the use of some connections causes livelocks. In this paper, we describe a robust routing protocol that tolerates up to roughly 40% of variation in the transmission ranges of the mobile hosts. More precisely, our protocol guarantees message delivery in a connected ad hoc network whenever the ratio of the maximum transmission range to the minimum transmission range is at most .     

Scalable routing strategies for ad hoc wireless networks

We consider a large population of mobile stations that are interconnected by a multihop wireless network. The applications of this wireless infrastructure range from ad hoc networking (e.g., collaborative, distributed computing) to disaster recovery (e.g., fire, flood, earthquake), law enforcement (e.g., crowd control, search-and-rescue), and military (automated battlefield). Key characteristics of this system are the large number of users, their mobility, and the need to operate without the support of a fixed (wired or wireless) infrastructure. The last feature sets this system apart from existing cellular systems and in fact makes its design much more challenging. In this environment, we investigate routing strategies that scale well to large populations and can handle mobility. In addition, we address the need to support multimedia communications, with low latency requirements for interactive traffic and quality-of-service (QoS) support for real-time streams (voice/video). In the wireless routing area, several schemes have already been proposed and implemented (e.g., hierarchical routing, on-demand routing, etc.). We introduce two new schemes-fisheye state routing (FSR) and hierarchical state routing (HSR)-which offer some competitive advantages over the existing schemes. We compare the performance of existing and proposed schemes via simulation     

Mobile backbone synthesis for ad hoc wireless networks

In this paper, we present an extended mobile backbone network topology synthesis algorithm (ETSA) for constructing and maintaining a dynamic backbone structure for mobile ad hoc wireless networks. We present and analyze the mathematical features of the proposed scheme. Using these results, we prove that: (1) The ETSA scheme converges in constant time; (2) The length of each control packet is bounded by a constant value that is independent of the number of network nodes; (3) The size of the backbone network depends only on the size of the operational area and is independent of nodal density. We compare the performance features of this scheme with those characterizing other protocols that employ clustering operations and/or use selective forwarding on demand routing methods. In addition, we present an on-demand routing protocol (MBNR) that makes use of the underlying dynamically self-configuring backbone network infrastructure and demonstrate its performance advantages when compared with an on-demand routing protocol that is based on a flat architecture, as well as with other backbone-based routing protocols.     

Routing security in wireless ad hoc networks

A mobile ad hoc network consists of a collection of wireless mobile nodes that are capable of communicating with each other without the use of a network infrastructure or any centralized administration. MANET is an emerging research area with practical applications. However, wireless MANET is particularly vulnerable due to its fundamental characteristics, such as open medium, dynamic topology, distributed cooperation, and constrained capability. Routing plays an important role in the security of the entire network. In general, routing security in wireless MANETs appears to be a problem that is not trivial to solve. In this article we study the routing security issues of MANETs, and analyze in detail one type of attack-the "black hole" problem-that can easily be employed against the MANETs. We also propose a solution for the black hole problem for ad hoc on-demand distance vector routing protocol.     

Intrusion detection in wireless ad hoc networks

Intrusion detection has, over the last few years, assumed paramount importance within the broad realm of network security, more so in the case of wireless ad hoc networks. These are networks that do not have an underlying infrastructure; the network topology is constantly changing. The inherently vulnerable characteristics of wireless ad hoc networks make them susceptible to attacks, and it may be too late before any counter action can take effect. Second, with so much advancement in hacking, if attackers try hard enough they will eventually succeed in infiltrating the system. This makes it important to constantly (or at least periodically) monitor what is taking place on a system and look for suspicious behavior. Intrusion detection systems (IDSs) do just that: monitor audit data, look for intrusions to the system, and initiate a proper response (e.g., email the systems administrator, start an automatic retaliation). As such, there is a need to complement traditional security mechanisms with efficient intrusion detection and response. In this article we present a survey on the work that has been done in the area of intrusion detection in mobile ad hoc networks.