Wearable Microfluidic Diaphragm Pressure Sensor for Health and Tactile Touch Monitoring

Flexible pressure sensors have many potential applications in wearable electronics, robotics, health monitoring, and more. In particular, liquid‐metal‐based sensors are especially promising as they can undergo strains of over 200% without failure. However, current liquid‐metal‐based strain sensors are incapable of resolving small pressure changes in the few kPa range, making them unsuitable for applications such as heart‐rate monitoring, which require a much lower pressure detection resolution. In this paper, a microfluidic tactile diaphragm pressure sensor based on embedded Galinstan microchannels (70 µm width × 70 µm height) capable of resolving sub‐50 Pa changes in pressure with sub‐100 Pa detection limits and a response time of 90 ms is demonstrated. An embedded equivalent Wheatstone bridge circuit makes the most of tangential and radial strain fields, leading to high sensitivities of a 0.0835 kPa^?1 change in output voltage. The Wheatstone bridge also provides temperature self‐compensation, allowing for operation in the range of 20–50 °C. As examples of potential applications, a polydimethylsiloxane (PDMS) wristband with an embedded microfluidic diaphragm pressure sensor capable of real‐time pulse monitoring and a PDMS glove with multiple embedded sensors to provide comprehensive tactile feedback of a human hand when touching or holding objects are demonstrated.     

柔性触觉传感器用温度敏感导电橡胶的电阻-温度模型

以通用有效介质理论为基础,得出柔性触觉传感器用温度敏感导电橡胶的电阻-温度计算模型。采用炭黑-硅橡胶导电复合体系(导电/炭黑橡胶)作为实验材料,对该模型进行了实验验证。结果表明,在填料分布均匀、体积分数接近渗流体积分数等边界条件下,电阻-温度计算模型与实验结果吻合,表现出一致的"电阻-正温度系数"(PTCR)变化规律。在温度场的作用下,基体的体积膨胀而导致炭黑浓度被稀释的过程对PTCR效应存在重要影响;基体的体积膨胀导致材料形状的改变对PTCR效应无显著影响。     

Graphene Oxide,Highly Reduced Graphene Oxide,and Graphene: Versatile Building Blocks for Carbon‐Based Materials

Isolated graphene, a nanometer‐thick two‐dimensional analog of fullerenes and carbon nanotubes, has recently sparked great excitement in the scientific community given its excellent mechanical and electronic properties. Particularly attractive is the availability of bulk quantities of graphene as both colloidal dispersions and powders, which enables the facile fabrication of many carbon‐based materials. The fact that such large amounts of graphene are most easily produced via the reduction of graphene oxide—oxygenated graphene sheets covered with epoxy, hydroxyl, and carboxyl groups—offers tremendous opportunities for access to functionalized graphene‐based materials. Both graphene oxide and graphene can be processed into a wide variety of novel materials with distinctly different morphological features, where the carbonaceous nanosheets can serve as either the sole component, as in papers and thin films, or as fillers in polymer and/or inorganic nanocomposites. This Review summarizes techniques for preparing such advanced materials via stable graphene oxide, highly reduced graphene oxide, and graphene dispersions in aqueous and organic media. The excellent mechanical and electronic properties of the resulting materials are highlighted with a forward outlook on their applications.     

Fingerprint‐Inspired Flexible Tactile Sensor for Accurately Discerning Surface Texture

Inspired by the epidermal–dermal and outer microstructures of the human fingerprint, a novel flexible sensor device is designed to improve haptic perception and surface texture recognition, which is consisted of single‐walled carbon nanotubes, polyethylene, and polydimethylsiloxane with interlocked and outer micropyramid arrays. The sensor shows high pressure sensitivity (?3.26 kPa^?1 in the pressure range of 0?300 Pa), and it can detect the shear force changes induced by the dynamic interaction between the outer micropyramid structure on the sensor and the tested material surface, and the minimum dimension of the microstripe that can be discerned is as low as 15 µm × 15 µm (interval × width). To demonstrate the texture discrimination capability, the sensors are tested for accurately discerning various surface textures, such as the textures of different fabrics, Braille characters, the inverted pyramid patterns, which will have great potential in robot skins and haptic perception, etc.     

Ultralight Multifunctional Carbon‐Based Aerogels by Combining Graphene Oxide and Bacterial Cellulose

Nanostructured carbon aerogels with outstanding physicochemical properties have exhibited great application potentials in widespread fields and therefore attracted extensive attentions recently. It is still a challenge so far to develop flexible and economical routes to fabricate high‐performance nanocarbon aerogels, preferably based on renewable resources. Here, ultralight and multifunctional reduced graphene oxide/carbon nanofiber (RGO/CNF) aerogels are fabricated from graphene oxide and low‐cost, industrially produced bacterial cellulose by a three‐step process of freeze‐casting, freeze‐drying, and pyrolysis. The prepared RGO/CNF aerogel possesses a very low apparent density in the range of 0.7–10.2 mg cm^?3 and a high porosity up to 99%, as well as a mechanically robust and electrically conductive 3D network structure, which makes it to be an excellent candidate as absorber for oil clean‐up and an ideal platform for constructing flexible and stretchable conductors.     

Non‐Volatile ReRAM Devices Based on Self‐Assembled Multilayers of Modified Graphene Oxide 2D Nanosheets

2D nanomaterials have been actively utilized in non‐volatile resistive switching random access memory (ReRAM) devices due to their high flexibility, 3D‐stacking capability, simple structure, transparency, easy fabrication, and low cost. Herein, it demonstrates re‐writable, bistable, transparent, and flexible solution‐processed crossbar ReRAM devices utilizing graphene oxide (GO) based multilayers as active dielectric layers. The devices employ single‐ or multi‐component‐based multilayers composed of positively charged GO (N‐GO(+) or NS‐GO(+)) with/without negatively charged GO(‐) using layer‐by‐layer assembly method, sandwiched between Al bottom and Au top electrodes. The device based on the multi‐component active layer Au/[N‐GO(+)/GO(‐)]_n/Al/PES shows higher ON/OFF ratio of ≈10⁵ with switching voltage of ?1.9 V and higher retention stability (≈10⁴ s), whereas the device based on single component (Au/[N‐GO(+)]_n/Al/PES) shows ≈10³ ON/OFF ratio at ±3.5 V switching voltage. The superior ReRAM properties of the multi‐component‐based device are attributed to a higher coating surface roughness. The Au/[N‐GO(+)/GO(–)]_n/Al/PES device prepared from lower GO concentration (0.01%) exhibits higher ON/OFF ratio (≈10⁹) at switching voltage of ±2.0 V. However, better stability is achieved by increasing the concentration from 0.01% to 0.05% of all GO‐based solutions. It is found that the devices containing MnO₂ in the dielectric layer do not improve the ReRAM performance.     

A Highly Stretchable Transparent Self‐Powered Triboelectric Tactile Sensor with Metallized Nanofibers for Wearable Electronics

Recently, the quest for new highly stretchable transparent tactile sensors with large‐scale integration and rapid response time continues to be a great impetus to research efforts to expand the promising applications in human–machine interactions, artificial electronic skins, and smart wearable equipment. Here, a self‐powered, highly stretchable, and transparent triboelectric tactile sensor with patterned Ag‐nanofiber electrodes for detecting and spatially mapping trajectory profiles is reported. The Ag‐nanofiber electrodes demonstrate high transparency (>70%), low sheet resistance (1.68–11.1 Ω □^?1), excellent stretchability, and stability (>100% strain). Based on the electrode patterning and device design, an 8 × 8 triboelectric sensor matrix is fabricated, which works well under high strain owing to the effect of the electrostatic induction. Using cross‐locating technology, the device can execute more rapid tactile mapping, with a response time of 70 ms. In addition, the object being detected can be made from any commonly used materials or can even be human hands, indicating that this device has widespread potential in tactile sensing and touchpad technology applications.