Borocarbonitrides as Metal‐Free Catalysts for the Hydrogen Evolution Reaction

Hydrogen generation by water splitting is clearly a predominant and essential strategy to tackle the problems related to renewable energy. In this context, the discovery of proper catalysts for electrochemical and photochemical water splitting assumes great importance. There is also a serious intent to eliminate platinum and other noble metal catalysts. To replace Pt by a non‐metallic catalyst with desirable characteristics is a challenge. Borocarbonitrides, (B_xC_yN_z) which constitutes a new class of 2D material, offer great promise as non‐metallic catalysts because of the easy tunability of bandgap, surface area, and other electronic properties with variation in composition. Recently, B_xC_yN_z composites with excellent electrochemical and photochemical hydrogen generation activities have been found, especially noteworthy being the observation that B_xC_yN_z with a carbon‐rich composition or its nanocomposites with MoS₂ come close to Pt in electrocatalytic properties, showing equally good photochemical activity.     

Structural Design and Electronic Modulation of Transition‐Metal‐Carbide Electrocatalysts toward Efficient Hydrogen Evolution

As the key of hydrogen economy, electrocatalytic hydrogen evolution reactions (HERs) depend on the availability of cost‐efficient electrocatalysts. Over the past years, there is a rapid rise in noble‐metal‐free electrocatalysts. Among them, transition metal carbides (TMCs) are highlighted due to their structural and electronic merits, e.g., high conductivity, metallic band states, tunable surface/bulk architectures, etc. Herein, representative efforts and progress made on TMCs are comprehensively reviewed, focusing on the noble‐metal‐like electronic configuration and the relevant structural/electronic modulation. Briefly, specific nanostructures and carbon‐based hybrids are introduced to increase active‐site abundance and to promote mass transportation, and heteroatom doping and heterointerface engineering are encouraged to optimize the chemical configurations of active sites toward intrinsically boosted HER kinetics. Finally, a perspective on the future development of TMC electrocatalysts is offered. The overall aim is to shed some light on the exploration of emerging materials in energy chemistry.     

Noble‐Metal‐Free Electrocatalysts for Oxygen Evolution

Oxygen evolution reaction (OER) plays a vital role in many energy conversion and storage processes including electrochemical water splitting for the production of hydrogen and carbon dioxide reduction to value‐added chemicals. IrO₂ and RuO₂, known as the state‐of‐the‐art OER electrocatalysts, are severely limited by the high cost and low earth abundance of these noble metals. Developing noble‐metal‐free OER electrocatalysts with high performance has been in great demand. In this review, recent advances in the design and synthesis of noble‐metal‐free OER electrocatalysts including Ni, Co, Fe, Mn‐based hydroxides/oxyhydroxides, oxides, chalcogenides, nitrides, phosphides, and metal‐free compounds in alkaline, neutral as well as acidic electrolytes are summarized. Perspectives are also provided on the fabrication, evaluation of OER electrocatalysts and correlations between the structures of the electrocatalysts and their OER activities.     

In Situ Synthesis of MoP Nanoflakes Intercalated N‐Doped Graphene Nanobelts from MoO3–Amine Hybrid for High‐Efficient Hydrogen Evolution Reaction

Molybdenum phosphide (MoP) is a promising non‐noble‐metal electrocatalyst in the hydrogen evolution reaction (HER), but practical implementation is impeded by the sluggish HER kinetics and poor chemical stability. Herein, a novel high‐efficiency HER electrocatalyst comprising MoP nanoflakes intercalated nitrogen‐doped graphene nanobelts (MoP/NG), which are synthesized by one‐step thermal phosphiding organic–inorganic hybrid dodecylamine (DDA) inserted MoO₃ nanobelts, is reported. The intercalated DDA molecules are in situ carbonized into the NG layer and the sandwiched MoO₃ layer is converted into MoP nanoflakes which are intercalated between the NG layers forming the alternatingly stacked MoP/NG hybrid nanobelts. The MoP nanoflakes provide abundant edge sites and the sandwiched MoP/NG hybrid enables rapid ion/electron transport thus yielding excellent electrochemical activity and stability for HER. The MoP/NG shows a low overpotential of 94 mV at 10 mA cm⁻², small Tafel slope of 50.1 mV dec⁻¹, and excellent electrochemical stability with 99.5% retention for over 22 h.     

Graphene Nanoarchitectonics: Recent Advances in Graphene‐Based Electrocatalysts for Hydrogen Evolution Reaction

Under the double pressures of both the energy crisis and environmental pollution, the exploitation and utilization of hydrogen, a clean and renewable power resource, has become an important trend in the development of sustainable energy‐production and energy‐consumption systems. In this regard, the electrocatalytic hydrogen evolution reaction (HER) provides an efficient and clean pathway for the mass production of hydrogen fuel and has motivated the design and construction of highly active HER electrocatalysts of an acceptable cost. In particular, graphene‐based electrocatalysts commonly exhibit an enhanced HER performance owing to their distinctive structural merits, including a large surface area, high electrical conductivity, and good chemical stability. Considering the rapidly growing research enthusiasm for this topic over the last several years, herein, a panoramic review of recent advances in graphene‐based electrocatalysts is presented, covering various advanced synthetic strategies, microstructural characterizations, and the applications of such materials in HER electrocatalysis. Lastly, future perspectives on the challenges and opportunities awaiting this emerging field are proposed and discussed.     

Nanoarchitectonics for Transition‐Metal‐Sulfide‐Based Electrocatalysts for Water Splitting

Heterogenous electrocatalysts based on transition metal sulfides (TMS) are being actively explored in renewable energy research because nanostructured forms support high intrinsic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, it is described how researchers are working to improve the performance of TMS‐based materials by manipulating their internal and external nanoarchitectures. A general introduction to the water‐splitting reaction is initially provided to explain the most important parameters in accessing the catalytic performance of nanomaterials catalysts. Later, the general synthetic methods used to prepare TMS‐based materials are explained in order to delve into the various strategies being used to achieve higher electrocatalytic performance in the HER. Complementary strategies can be used to increase the OER performance of TMS, resulting in bifunctional water‐splitting electrocatalysts for both the HER and the OER. Finally, the current challenges and future opportunities of TMS materials in the context of water splitting are summarized. The aim herein is to provide insights gathered in the process of studying TMS, and describe valuable guidelines for engineering other kinds of nanomaterial catalysts for energy conversion and storage technologies.     

Nickel@Nitrogen‐Doped Carbon@MoS2 Nanosheets: An Efficient Electrocatalyst for Hydrogen Evolution Reaction

Developing cheap, abundant, and easily available electrocatalysts to drive the hydrogen evolution reaction (HER) at small overpotentials is an urgent demand of hydrogen production from water splitting. Molybdenum disulfide (MoS₂) based composites have emerged as competitive electrocatalysts for HER in recent years. Herein, nickel@nitrogen‐doped carbon@MoS₂ nanosheets (Ni@NC@MoS₂) hybrid sub‐microspheres are presented as HER catalyst. MoS₂ nanosheets with expanded interlayer spacings are vertically grown on nickel@nitrogen‐doped carbon (Ni@NC) substrate to form Ni@NC@MoS₂ hierarchical sub‐microspheres by a simple hydrothermal process. The formed Ni@NC@MoS₂ composites display excellent electrocatalytic activity for HER with an onset overpotential of 18 mV, a low overpotential of 82 mV at 10 mA cm^?2, a small Tafel slope of 47.5 mV dec^?1, and high durability in 0.5 H₂SO₄ solution. The outstanding HER performance of the Ni@NC@MoS₂ catalyst can be ascribed to the synergistic effect of dense catalytic sites on MoS₂ nanosheets with exposed edges and expanded interlayer spacings, and the rapid electron transfer from Ni@NC substrate to MoS₂ nanosheets. The excellent Ni@NC@MoS₂ electrocatalyst promises potential application in practical hydrogen production, and the strategy reported here can also be extended to grow MoS₂ on other nitrogen‐doped carbon encapsulated metal species for various applications.     

Transition‐Metal‐Based Electrocatalysts as Cocatalysts for Photoelectrochemical Water Splitting: A Mini Review

Converting solar energy into hydrogen via photoelectrochemical (PEC) water splitting is one of the most promising approaches for a sustainable energy supply. Highly active, cost‐effective, and robust photoelectrodes are undoubtedly crucial for the PEC technology. To achieve this goal, transition‐metal‐based electrocatalysts have been widely used as cocatalysts to improve the performance of PEC cells for water splitting. Herein, this Review summarizes the recent progresses of the design, synthesis, and application of transition‐metal‐based electrocatalysts as cocatalysts for PEC water splitting. Mo, Ni, Co‐based electrocatalysts for the hydrogen evolution reaction (HER) and Co, Ni, Fe‐based electrocatalysts for the oxygen evolution reaction (OER) are emphasized as cocatalysts for efficient PEC HER and OER, respectively. Particularly, some most efficient and robust photoelectrode systems with record photocurrent density or durability for the half reactions of HER and OER are highlighted and discussed. In addition, the self‐biased PEC devices with high solar‐to‐hydrogen efficiency based on earth‐abundant materials are also addressed. Finally, this Review is concluded with a summary and remarks on some challenges and opportunities for the further development of transition‐metal‐based electrocatalysts as cocatalysts for PEC water splitting.     

Interstitial Hydrogen Atom to Boost Intrinsic Catalytic Activity of Tungsten Oxide for Hydrogen Evolution Reaction

Tungsten oxide (WO₃) is an appealing electrocatalyst for the hydrogen evolution reaction (HER) owing to its cost-effectiveness and structural adjustability. However, the WO₃ electrocatalyst displays undesirable intrinsic activity for the HER, which originates from the strong hydrogen adsorption energy. Herein, for effective defect engineering, a hydrogen atom inserted into the interstitial lattice site of tungsten oxide (H_0.23WO₃) is proposed to enhance the catalytic activity by adjusting the surface electronic structure and weakening the hydrogen adsorption energy. Experimentally, the H_0.23WO₃ electrocatalyst is successfully prepared on reduced graphene oxide. It exhibits significantly improved electrocatalytic activity for HER, with a low overpotential of 33 mV to drive a current density of 10 mA cm⁻² and ultra-long catalytic stability at high-throughput hydrogen output (200 000 s, 90 mA cm⁻²) in acidic media. Theoretically, density functional theory calculations indicate that strong interactions between interstitial hydrogen and lattice oxygen lower the electron density distributions of the d-orbitals of the active tungsten (W) centers to weaken the adsorption of hydrogen intermediates on W-sites, thereby sufficiently promoting fast desorption from the catalyst surface. This work enriches defect engineering to modulate the electron structure and provides a new pathway for the rational design of efficient catalysts for HER.     

A Microribbon Hybrid Structure of CoOx‐MoC Encapsulated in N‐Doped Carbon Nanowire Derived from MOF as Efficient Oxygen Evolution Electrocatalysts

Developing highly efficient electrocatalysts for oxygen evolution is vital for renewable and sustainable energy production and storage. Herein, nitrogen‐doped carbon encapsulated CoOx‐MoC heterostructures are reported for the first time as high performance oxygen evolution electrocatalysts. The composition can be tuned by the addition of a Mo source to form a nanowire‐assembled hierarchically porous microstructure, which can enlarge the specific surface area, thus exposing more active sites, facilitating mass transport and charge transfer. Moreover, it is demonstrated that the formation of CoOx‐MoC heterostructures and the resulting synergistic effect between MoC and Co facilitate the reaction kinetics, leading to significantly improved oxygen evolution reaction (OER) activity with an onset overpotential of merely 290 mV, and a low overpotential of 330 mV to afford a current density of 10 mA cm^?2. The well‐constructed microarchitecture contributes to superior long term stability electrochemical behaviors. This work provides a facile strategy via composition tuning and structure optimization for the development of next‐generation nonprecious metal‐based OER electrocatalysts.     

Highly Efficient Photocatalytic Hydrogen Evolution by ReS2 via a Two‐Electron Catalytic Reaction

Highly efficient photocatalytic hydrogen evolution (PHE) is highly desirable for addressing the global energy crisis and environmental problems. Although much attention has been given to electron–hole separation, ridding photocatalysts of poor efficiency remains challenging. Here, a two‐electron catalytic reaction is developed by utilizing the distinct trion behavior of ReS₂ and the efficient reduction of two H⁺ (2H⁺ + 2e^? → H₂) is realized. Due to the monolayer‐like structure of the catalyst, the free electrons in ReS₂ can be captured by the tightly bound excitons to form trions consisting of two electrons and one hole. These trions can migrate to the surface and participate in the two‐electron reaction at the abundant active sites. As expected, such a two‐electron catalytic reaction endows ReS₂ with a PHE rate of 13 mmol g^?1 h^?1 under visible light irradiation. Meanwhile, this reaction allows the typically poor PHE efficiency of pure transition metal dichalcogenides to be overcome. The proposed two‐electron catalytic reaction provides a new approach to the design of photocatalysts for PHE.     

Single Tungsten Atoms Supported on MOF‐Derived N‐Doped Carbon for Robust Electrochemical Hydrogen Evolution

Tungsten‐based catalysts are promising candidates to generate hydrogen effectively. In this work, a single‐W‐atom catalyst supported on metal–organic framework (MOF)‐derived N‐doped carbon (W‐SAC) for efficient electrochemical hydrogen evolution reaction (HER), with high activity and excellent stability is reported. High‐angle annular dark‐field scanning transmission electron microscopy (HAADF‐STEM) and X‐ray absorption fine structure (XAFS) spectroscopy analysis indicate the atomic dispersion of the W species, and reveal that the W₁N₁C₃ moiety may be the favored local structure for the W species. The W‐SAC exhibits a low overpotential of 85 mV at a current density of 10 mA cm^?2 and a small Tafel slope of 53 mV dec^?1, in 0.1 m KOH solution. The HER activity of the W‐SAC is almost equal to that of commercial Pt/C. Density functional theory (DFT) calculation suggests that the unique structure of the W₁N₁C₃ moiety plays an important role in enhancing the HER performance. This work gives new insights into the investigation of efficient and practical W‐based HER catalysts.