共查询到20条相似文献,搜索用时 734 毫秒
1.
2.
3.
文章介绍了一种基于LPC2478 CPU和XC3S1500 FPGA的光传输误码测试仪的方案设计。该测试仪以FPGA为数据处理核心,完成误码检测;CPU为控制核心,完成系统初始化和逻辑控制。详细描述了SDH信号处理模块、控制模块、时钟同步模块、误码检测模块的软硬件设计。并利用设计的样机和进口仪器ANT-5进行了对测,对多批次SDH设备进行了误码测试,测试结果表明此设计方案稳定可靠,实现了对SDH光传输设备误码检测的设计要求。 相似文献
4.
为了实现多LED紫外光通信系统,首先介绍了紫外光通信系统的理论知识,设计的发送端能采用直流驱动紫外光LED为光源,接收端采用滤光片和光电倍增管实现光电检测,详细介绍了紫外光通信系统相关电路的原理和设计方案,在不同条件下对系统进行了实验测试,并对通信距离和误码率进行了分析,随着LED个数及LED供电电流的增加,紫外光通信的传输距离增加,并且误码率减低,使得紫外光通信系统的性能得到了提高。结果表明:系统可以满足近距离无线紫外光通信在角度对准、空分复用及方便组网等方面的需求。 相似文献
5.
针对KJ90N系列矿井安全监控系统中本安型直流电源的测试老化问题,设计了一种在线测试老化系统。该系统包括上位机、中位机及测试单元等组成部分,是基于16位DSP技术的中位机硬件设计、C#.NET技术的上位机软件开发,完成的一套自动化的测试老化装置。该系统具有自动加载负载、信号采集、输出保护、过温保护、数据存储和分析等多项功能。结果表明该系统实现了自动测试老化功能。对于其他低电压电源产品的测试老化有较好的借鉴作用。 相似文献
6.
7.
8.
9.
10.
11.
12.
A communication system based on an ultraviolet(UV) laser at 266 nm is presented to improve the communication distance. The pulse frequency-shift keying(FSK) modulation scheme is studied and improved in order to reduce the bit error rate(BER), and is put into practice on a field programmable gate array(FPGA). The mathematical models of the modulation and demodulation are established. A test platform is set up to measure the energy density and pulse response under different distances and receiver elevation angles. It is shown that the omnibearing communication can be realized, and the bit rate is limited to 12.5 Mbit/s. The BER is estimated to be less than 10-7 at distance of 300 m in line-of-sight(LOS) communication model and to be less than 10-6 at distance of 80 m in non-line-of-sight(NLOS) communication model. 相似文献
13.
Hong D. Ong C.-K. Cheng K.-T. 《IEEE transactions on circuits and systems. I, Regular papers》2006,53(12):2616-2627
High-performance serial communication systems often require the bit error rate (BER) to be at the level of 10-12 or lower. The excessive test time for measuring such a low BER is a major hindrance in testing communication systems. In this paper, we show that the jitter spectral information extracted from the transmitted data and some key characteristics of the clock and data recovery (CDR) circuit can be used to estimate the BER effectively without comparing each captured bit for error detection. This analysis is also useful for designing a CDR circuit for systems whose jitter spectral information is known. Experimental results comparing the estimated and measured BER on a 2.5-Gb/s commercial CDR circuit demonstrate the high accuracy of the proposed technique 相似文献
14.
超混沌序列对DS-UWB多址性能的改善 总被引:1,自引:1,他引:0
利用Roessler超混沌系统构造了一种新的超混沌序列,分析了序列的相关特性,并将其应用于直接序列超宽带(DS—UWB)系统中,以提高它的误码性能。建立了DS-UWB通信系统的模型,以超混沌序列作地址码对高斯白噪声信道中多用户DS—UWB系统误码率进行了分析,并将其与m序列作地址码时的相应性能进行了比较。由分析和仿真可知,构造的新的超混沌序列能较好地改善DS-UWB的多址性能。 相似文献
15.
Noise generated in a system establishes the fundamental limitation on the performance of all communication systems and can be characterized with both minimum noise figure (NFmin) and bit error rate (BER). The development of data processing and transmission into the gigabit/second range requires a detailed understanding of the correlation between NFmin and BER. The authors report on the cryogenic microwave measurements of NFmin, current gain cutoff frequency (F t), and BER at 3 Gb/s of 0.6-μm GaAs MESFETs. The noise characterization of GaAs-based MESFET devices and circuits is significant because GaAs-based MESFETs are clearly the key industry device for both digital and analog applications 相似文献
16.
A mixed-signal integrated circuit for FM-DCSK modulation 总被引:1,自引:0,他引:1
Delgado-Restituto M. Acosta A.J. Rodriguez-Vazquez A. 《Solid-State Circuits, IEEE Journal of》2005,40(7):1460-1471
This paper presents a mixed-signal application-specific integrated circuit (ASIC) for a frequency-modulated differential chaos shift keying (FM-DCSK) communication system. The chip is conceived to serve as an experimental platform for the evaluation of the FM-DCSK modulation scheme, and includes several programming features toward this goal. The operation of the ASIC is herein illustrated for a data rate of 500 kb/s and a transmission bandwidth in the range of 17 MHz. Using signals acquired from the test platform, bit error rate (BER) estimations of the overall FM-DCSK communication link have been obtained assuming wireless transmission at the 2.4-GHz ISM band. Under all tested propagation conditions, including multipath effects, the system obtains a BER =10/sup -3/ for E/sub b//N/sub o/ lower than 28 dB. 相似文献
17.
18.
为研究电磁脉冲串对数字通信电台的阻塞效应机理,以某型数字通信电台为受试对象,通过电磁脉冲注入试验,研究了受试电台误码率随电磁脉冲串幅值、重复间隔时间的变化规律。结果表明,随着脉冲幅值的增大,误码率先单调上升再以不同规律变化;不同脉冲重复率下受试电台的敏感误码率相差较大,敏感误码率不能用固定数值作为敏感判据,但利用敏感误码率与脉冲重复率成正比作为判据则具有较高的准确度,据此给出了受试数字电台的误码率敏感判据及试验方法,以通过部分试验数据获取任意脉冲重复率下的误码率敏感判据。 相似文献
19.
In this letter, a novel M‐ary code‐selected direct sequence (DS) ultra‐wideband (UWB) communication system is presented. Our purpose is to achieve a high data rate by an M‐ary code‐selected direct sequence bipolar pulse amplitude modulation (MCSDS‐BPAM) scheme. In this system, a particular DS code sequence is selected by the log2M/2 bits from the DS gold code set. This scheme can accomplish both a high data rate without increasing the system bandwidth or changing the pulse shape and improve the BER with an increase of modulation level M even at a lower signal‐to‐noise ratio (SNR). The receiver signal processing algorithm is given for an MCSDS‐BPAM UWB system over an ideal AWGN channel and correlation receivers. 相似文献
20.
由于大气湍流的存在,使激光信号在大气传输中产生振幅的随机起伏,称为大气闪烁。大气闪烁将引起激光通信误码率的增加。由光强起伏大小的统计规律和通信基本原理推导出了弱湍流条件下由光强闪烁引起的误码率计算公式,分别建立了地面水平链路和地-空斜向链路中的大气闪烁误码率模型,对模型进行了仿真,分析了湍流强弱、信号调制方式、链路距离、激光波长及地面发射仰角对闪烁误码率的影响,得到了闪烁误码率的变化规律。结果表明,通过合理选择信号调制方式、激光波长、站址位置及地面发射仰角等方式能够有效地降低大气闪烁误码率,提高通信可靠性。 相似文献