A setup for the coupling of a thin-layer electrochemical flow cell to electrospray mass spectrometry

A novel setup for the coupling of a commercially available thin-layer cell to electrospray mass spectrometry (ESI-MS) which allows the electrochemical reactions at the counter electrode to be straightforwardly separated from the flow into the mass spectrometer has been developed. In this way, interferences from reaction products formed at the counter electrode can be minimized. This reduces the risk of changes in the mass spectra as a result of electrochemical reactions in the solution. The described setup also enables the working electrode to be positioned close to the electrospray (ESI) emitter without the need for a grounding point or a long transfer line between the electrochemical cell and the electrospray emitter. By decoupling the electrochemical reactions in the flow cell and those in the electrospray emitter, improved facilities for studies of electrochemical reactions are obtained through a better control of the potential of the working electrode. The setup has been used to study the oxidation of a drug (Olsalazine), which previously has been found to involve chemical follow-up reactions. It is also demonstrated that uncharged thiols can be detected in ESI-MS after spontaneous adsorption on a gold working electrode, followed by oxidative desorption to yield sulfinates or sulfonates. This adsorption and potential-controlled desorption has been used for the preconcentration of micromolar concentrations of 1-hexanethiol as well as for desalting of solutions containing micromolar concentrations of thiols. The results indicate that the present on-line coupling of an electrochemical cell to ESI-MS provides promising possibilities for sample preconcentration, matrix exchange (including desalting), and ionization of neutral compounds, such as thiols.     

On-line electrodialytic salt removal in electrospray ionization mass spectrometry of proteins

Salts and buffers, commonly used in isolation and stabilization of biological analytes, have a deleterious effect on electrospray ionization mass spectrometry (ESI-MS). Excessive concentrations of salts lead to ion suppression and adduct formation, which mask or complicate ion signals. In this work, we describe a salt remover (SR), configured as a three-compartment flow-through system, where the central compartment is separated from the outer compartments by a cation-exchange membrane (CEM) and an anion-exchange membrane (AEM). One platinum electrode is placed in each of the outer compartments, where water or electrolyte is flowing. The CEM electrode is held at a negative potential relative to the AEM side; cations/anions migrate by electrophoresis to the CEM/AEM receiver liquids, respectively. Proteins have poorer electrophoretic mobility relative to the buffer components, permitting removal of the salt. The salt-free proteins proceed to the ESI source. The capillary scale SR (internal volume 2.5 μL) described here effectively desalted continuous flows of NaCl solutions (200 mequiv/L at 1 μL/min, equivalent to a flux of 200 nequiv/min with 88% efficiency) and achieved >99.8% salt removal with 154 mM NaCl (isotonic saline) at 1 μL/min. With optimized current, >80% of concurrently present 20 μM protein was transmitted. Desalting efficiency and analyte loss was evaluated with different salt concentration and flow rate combinations under different applied current. Good-quality ESI-MS spectra of cytochrome c, myoglobin, and lysozyme as test proteins in a saline solution, passed through the SR, are demonstrated.     

Synergistic design of electric field and membrane in facilitating continuous adsorption for cleanup and enrichment of proteins in direct ESI-MS analysis

We designed and fabricated a novel microdevice to facilitate continuous adsorption phenomena for biological sample preparation. Using the device, we also developed an online, highly integrated, multifunctional strategy, with a promise of accepting a large volume of crude tissue extracts with the end point generation of a reliable MS identification within 20 min. Under an external electric field, charged membranes can adsorb multiple layers of proteins, which exceed the capacity limit of common resins or membranes. It enlarges sample loading and trapping efficiency, thus bypasses the tradeoff between sample capacity and downstream detection sensitivity. This integrated approach, formed by synergistic utilization among electric field, membrane, and fluidic handling at the microscale, reduces the overall complexity of crude samples in one step for direct MS analysis. The sample preparation goals, including enrichment, desalting, removal of noncharged contaminants, and initial fractionation, can be rapidly performed in a single device. The strategy facilitates reproducible MS quantification by circumventing traditional laborious and time-consuming sample preparation steps. In addition, MEPD extended the ion trap linear dynamic range from 2 to at least 4 orders of magnitude by eliminating ion suppression effect, enriching target analyte(s), and decreasing sample loss during integrated sample preparation.     

Sample preparation using a miniaturized supported liquid membrane device connected on-line to packed capillary liquid chromatography

A miniaturized supported liquid membrane device has been developed for sample preparation and connected on-line to a packed capillary liquid chromatograph. The device consists of hydrophobic polypropylene hollow fiber, inserted and fastened in a cylindrical channel in a Kel-F piece. The pores of the fiber are filled with an organic solvent, in this study 6-undecanone, thus forming a liquid membrane. The sample is pumped on the outside of the hollow fiber (donor), and the analytes are selectively enriched and trapped in the fiber lumen (acceptor). With this approach, the volume of the acceptor solution can be kept as low as 1-2 μL. This stagnant acceptor solution is then transferred through capillaries attached to the fiber ends to the LC system. The system was tested with a secondary amine (bambuterol), as a model substance in aqueous standard solutions as well as in plasma. The best extraction efficiency in aqueous solution, with an acceptor volume of 1.9 μL, was 32.5% at a donor flow rate of 2.5 μL/min. At flow rates above 20 μL/min, the concentration enrichment per time unit was approximately constant, at 0.9 times/min, i.e., 9 times enrichment in about 10 min. The overall repeatability (RSD) for spiked plasma samples was ～4% (n = 12). Linear calibration curves of peak area versus bambuterol concentration were obtained for both aqueous standard solutions and spiked plasma samples. The detection limit for bambuterol in plasma, after 10 min of extraction at a flow rate of 24 μL/min, was 80 nM.     

An integrated microfabricated device for dual microdialysis and on-line ESI-ion trap mass spectrometry for analysis of complex biological samples

A microfabricated dual-microdialysis device in a single integrated microfabricated platform was constructed using laser micromachining techniques for the rapid fractionation and cleanup of complex biological samples. On-line dual microdialysis and ESI-MS of biological samples was demonstrated using an ion trap mass spectrometer. The mass spectra obtained demonstrated the efficiency of dual microdialysis for removing both high-molecular-weight and low-molecular-weight species that interfere with effective ESI-MS analysis of target biopolymers. Signal-to-noise ratios were also greatly improved compared to direct sample infusion. In addition to its compactness, negligible dead volume, and robustness, the device can be used at a flow rate of only 200 nL/min, an order of magnitude lower than that obtained previously. This reduced sample consumption and improved sensitivity with ESI-MS. The results suggest the potential for integration of such microfabricated devices with other sample manipulations for the rapid ESI-MS analysis of complex biological samples.     

Coupling of protein HPLC to MALDI-TOF MS using an on-target device for fraction collection, concentration, digestion, desalting, and matrix/analyte cocrystallization

Multidimensional protein chromatography offers an alternative to gel-based separations for large-scale proteomic analyses of highly complex mixtures. However, these liquid separations divide the original mixtures into multitudes of discrete samples, each of which may require numerous steps of sample manipulation, such as fraction collection, buffer exchange, protease digestion, peptide desalting, and, in the case of MALDI-MS, matrix and analyte cocrystallization on target. When traditional high-flow liquid chromatography is used, large volumes of solvent must also be removed from fractions to maximize MS sensitivity. Although robotic liquid-handling devices can facilitate these steps and reduce analyst/sample contact, they remain prototypic and expensive. Here, we explore the use of a novel, one-piece elastomeric device, the BD MALDI sample concentrator, which affixes to a MALDI target to create a prestructured 96-well sample array on the target surface. We have developed methodologies to process high-flow HPLC fractions by collecting them directly into the elastomeric device and then subjecting them to sequential on-target sample concentration, buffer exchange, digestion, desalting, and matrix/analyte cocrystallization for MALDI-MS analyses. We demonstrate that this methodology enables the rapid digestion and analysis of low amounts of proteins and that it is effective in the characterization of an HPLC-fractionated protein mixture by MALDI-TOF MS followed by peptide mass fingerprinting.     

Automated control of local solution environments in open-volume microfluidics

We present an open-volume microfluidic system capable of on-line modification of a patterned laminar flow by using programmable inlet valves. Each separate solution environment in the flow pattern can be independently exchanged between different preloaded input solutions where each exchange requires 20 s. The number of flow patterns that can be generated by one device is N(n), where N represents the number of valve inlets and n the number of microchannels in the microfluidic system. Furthermore, the system can be operated as a combinatorial mixer, in which mixture of the different input solutions can be obtained independently in each channel. Since the flow patterns are generated in an open volume, they are accessible to many different detection methods and types of probes, e.g., microelectrodes, cells, or cell fragments. This technology offers the possibility to adjust the flow pattern composition in response to an output from a probe. This is the first step toward creating an automated feedback device controlled by, for example, biological cells.     

A microfluidic electrocapture device in sample preparation for protein analysis by MALDI mass spectrometry

The design and operation of a microfluidic device for sample preparation in MALDI mass spectrometry of peptides and proteins is described. It is particularly useful for proteomics applications and for mass determination of proteins in salt- and detergent-containing solutions. The system consists of a flow channel with two conductive areas or electrical junctions where proteins and peptides are retained by means of an electric field. The microfluidic device is made of PEEK tubing, and the junctions are covered with a conductive polymeric membrane. A syringe pump connected to the device produces a flow stream, and injection of sample is carried out manually via hydrodynamic pressure. Proteolytic peptides and intact proteins in salt- and detergent-containing acidic media were captured at the cathode junction followed by exchange of the original solution to a solvent suitable for subsequent mass spectrometry. Using this principle, a significant desalting effect was obtained for tryptic peptides in mass-mapping experiments. Protein sequence coverages were high (up to 40%) at subpicomole levels with results better than those obtained using reversed-phase solid-phase extraction. In contrast to the latter technique, the microfluidic device has the capacity to efficiently remove detergents such as CHAPS before peptide mapping and protein analysis.     

ATR-FT-IR membrane-based sensor for integrated microliquid-liquid extraction and detection

A novel straightforward membrane-based sensor, which uses attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy has been developed. The flow cell designed permits the on-line microliquid-liquid extraction of the target analyte into a organic solvent layer (OSL), which was deposited on the ATR surface using a sequential injection manifold. The aqueous and organic phases are separated via a commercial hydrophobic membrane placed on the PTFE piece of the cell. The main advantage of the proposed device is that the OSL can be created and regenerated in a continuous manner using the automatic manifold without opening the cell. The analytes are enriched into the OSL after diffusion through the membrane, which excludes the typical absorption bands of water. In addition, the behavior of different organic solvents was evaluated in order to increase the applicability and versatility of the proposed system. Finally, the analytical performance of the design was established for the detection and quantitation of Triton X100 in water.     

In line desalting mass spectrometry for the study of noncovalent biological complexes

Electrospray ionization-mass spectrometry is becoming widely used as a high-throughput method for the study of biomolecular interactions. It allows for the analysis of complexes from heterogeneous mixtures with high sensitivity and selectivity. In many cases, biomolecules and their complexes must be stored in nonvolatile salt buffers and other solubilizing agents, such as organics or detergents, to maintain stability and integrity. To ensure an efficient electrospray process, desalting and exchanging the biomolecular solutions into a volatile buffer is imperative. Current off-line or on-line methods to accomplish this are time-consuming, frequently disrupt noncovalent interactions, and can result in considerable sample loss. Here we describe a simple, general, and highly efficient, rapid in-line desalting approach using a small gel cartridge to assist in the mass spectrometric analysis of biomolecules and their complexes. Though the method has broad applicability, we focus our analysis on proteins and demonstrate its usefulness by examining protein-metal, protein-protein, protein-DNA, and protein-RNA interactions. The method is shown to provide rapid direct analysis of analyte solutions containing salts, glycerol, organics, and involatile buffers without deleterious effects.     

Stepwise mobilization of focused proteins in capillary isoelectric focusing mass spectrometry

A stepwise mobilization strategy has been developed for the elution of complex protein mixtures, separated by capillary isoelectric focusing (CIEF) for detection using on-line electrospray ionization mass spectrometry (ESI-MS). Carrier polyampholytes are used to establish a pH gradient as well as to control the electroosmotic flow arising from the use of uncoated fused-silica capillaries. Elution of focused protein zones is achieved by controlling the mobilization pressure and voltage, leaving the remaining protein zones focused inside the capillary. Protein zones are stepwise eluted from the capillary by changing the mobilization conditions. Stepwise mobilization improves separation resolution and simplifies coupling with multistage MS (i.e., MSn) analysis since it allows more effective temporal control of protein elution from the CIEF capillary. We also describe a modified configuration for coupling CIEF with ESI-MS using a coaxial sheath flow interface that facilitate the automation of on-line CIEF-ESI-MS analyses. The stepwise mobilization strategy is demonstrated for the analysis of standard protein mixtures and soluble E. coli lysate proteins using CIEF-ESI-MS. These results indicate that inlet pressure or voltage programming to control the elution of the protein zones from the capillary (i.e., gradient mobilization) may allow for the optimization of the mobilization conditions and provide higher resolution for CIEF separation of complex mixtures with on-line MS.     

Separation and analysis of nanomole quantities of heparin oligosaccharides using on-line capillary isotachophoresis coupled with NMR detection

Glycosaminoglycans (GAGs) are important in a number of biological processes and are structurally altered in many pathological conditions. The complete determination of GAG primary structures has been hampered by the lack of sensitive and specific analytical techniques. Nuclear magnetic resonance spectroscopy (NMR) is a powerful tool for GAG structure elucidation despite its relatively poor limits of detection. Solenoidal microcoils have greatly enhanced the mass limits of detection of NMR, enabling the on-line coupling of microseparation and concentration techniques such as capillary isotachophoresis (cITP), which can separate and concentrate analytes by 2-3 orders of magnitude. We have successfully used cITP coupled with on-line NMR detection to separate and concentrate nanomole quantities of heparin oligosaccharides. This sensitive on-line measurement approach has the potential to provide new insights into the relationships between biological function and GAG microstructures.     

Calibration of membrane extraction for air analysis

Calibration methods based on the recently developed mathematical model are proposed for air monitoring by membrane extraction. In membrane extraction, analytes permeate through the membrane at a constant rate controlled by the distribution constant and the diffusion coefficient. The principle of the proposed calibration approach is based on either theoretical or experimental determination of both constants at the extraction conditions. A group of selected compounds was employed for the experimental testing, and the results indicated practical feasibility of the approach. On-line determination of partition coefficients and distribution constants was proposed and investigated, producing very promising results. Both approaches to calibration facilitate quantitative monitoring.     

Microchip dialysis of proteins using in situ photopatterned nanoporous polymer membranes

Chip-level integration of microdialysis membranes is described using a novel method for in situ photopatterning of porous polymer features. Rapid and inexpensive fabrication of nanoporous microdialysis membranes in microchips is achieved using a phase separation polymerization technique with a shaped UV laser beam. By controlling the phase separation process, the molecular weight cutoffs of the membranes can be engineered for different applications. Counterflow dialysis is used to demonstrate extraction of low molecular weight analytes from a sample stream, using two different molecular weight cutoff (MWCO) membranes; the first one with MWCO below 5700 for desalting protein samples, and the second one with a higher MWCO for size-based fractionation of proteins. Modeling based on a simple control volume analysis on the microdialysis system is consistent with measured concentration profiles, indicating both that membrane properties are uniform, well-defined, and reproducible and that diffusion of subcutoff analytes through the membrane is rapid.     

On-line fourier transform infrared detection in capillary electrophoresis

The coupling of Fourier transform infrared (FT-IR) spectroscopy as a new on-line detection principle in capillary electrophoresis (CE) is presented. To overcome the problem of total IR absorption by the fused-silica capillaries that are normally employed in CE separations, a micromachined IR-transparent flow cell was constructed. The cell consists of two IR-transparent CaF2 plates separated by a polymer coating and a titanium layer producing an IR detection window, 150 microm wide and 2 mm long, with a path length of 15 microm. The IR beam was focused on the detection window using an off-axis parabolic mirror in an optical device (made in-house) attached to an external optical port of the spectrometer. The connections between the fused-silica capillaries and the flow cell were made by a small O-ring of UV-curing epoxy adhesive on the sharply cut ends of the capillaries, allowing the capillaries to be easily replaced. Aqueous solutions comprising mixtures of adenosine, guanosine, and adenosine monophosphate were used to test the system's performance. Conventional on-line UV detection was employed to obtain reference measurements of analytes after the IR detection flow cell. The limit of FT-IR detection for all analytes (in absolute amounts) was in the nano- to picogram range corresponding to concentrations in the low-millimolar range.     

Membrane-enclosed sorptive coating. an integrative passive sampler for monitoring organic contaminants in water.

An integrative sampler that consists of a bar coated with poly(dimethylsiloxane) (PDMS) enclosed in a dialysis membrane bag has been developed combining the advantages of the passive sampling approach with solventless preconcentration of organic solutes from aqueous matrixes and subsequent desorption of the sequestered analytes on-line with a capillary GC/MS system. The performance of the sampler was tested for integrative sampling of hydrophobic persistent organic pollutants including gamma-hexachlorocyclohexane, hexachlorobenzene, 2,2'-bis(4-chlorophenyl)-1,1'-dichloroethylene, polycyclic aromatic hydrocarbons, and polychlorinated biphenyls in the laboratory in a continuous-flow system. Linear uptake of all test analytes during exposure periods up to one week has been observed, and concentration proportionality of response of the sampler has been demonstrated. Over the range of controlled laboratory conditions, the magnitude of sampling rate values varied from 47 to 700 microL h(-1) per sampler. The uptake rate of chemicals was dependent on their molecular mass, as well as on the partition coefficient between the PDMS and water. A decrease in sampling rates with decreasing water temperature was observed. The sampling device has the potential to detect low aqueous concentrations (ng to pg L(-1)) of test substances.     

Direct on-line continuous supercritical fluid extraction and HPLC of aqueous pyrethrins solutions

A new method, employing supercritical fluid extraction (SFE) connected on-line with high-performance liquid chromatography, was developed for the determination of pyrethrins and piperonyl butoxide in aqueous solutions. The principle of the laboratory-made device for SFE is based on the low mutual solubility of water and supercritical (liquid) CO2. This device works in continuous mode that offers extraction of unlimited sample volumes. Different extraction temperatures and pressures were tested to find optimum extraction conditions. The addition of organic modifier and inorganic salt to the water sample to increase extraction recovery was investigated. The method was evaluated, and it was applied for the extraction of aqueous samples spiked with commercial insecticides. The working concentration range of the method was from the limit of quantification (0.1 microg L(-1)) to the solubility of the analytes in water.     

In vivo monitoring of multiple trace metals in the brain extracellular fluid of anesthetized rats by microdialysis-membrane desalter-ICPMS

We have developed an on-line analytical system involving microdialysis (MD) sampling, a carbohydrate membrane desalter (CMD), and an inductively coupled plasma mass spectrometer (ICPMS) system for the simultaneous determination of multiple trace metals in the extracellular fluid (ECF) in the brains of anesthetized rats. The microdialysate that perfused from the animal at a flow rate of 0.5 microL/min was on-line transferred to the CMD to remove the high-sodium matrix, followed by ICPMS measurement. The role of the CMD in this on-line system was investigated in detail. With prior addition of EDTA to the microdialysate to form anionic complexes of the metal analytes and the use of NH4Cl as a regenerant to exchange Na(+) with NH4(+) ions, both quantitative recovery of the trace metal analytes and quantitative removal of the sodium matrix could be achieved. Two experimental modes of the monitoring system were constructed. For those metals (e.g., Cu, Zn, and Mn) that existed at (sub)nanogram-per-milliliter concentrations in the microdialysate, the temporal resolution was 10 min when using a 10 microL loop for sample collection, followed by CMD and ICPMS; for those elements (e.g., Ca and Mg) that existed at microgram-per-milliliter levels (or greater), near-real-time analysis was possible because the microdialysate could be led, bypassing the sample loop, directly to the CMD for desalting without any time delay. Further improvement of the temporal resolution for the low-concentration elements was not possible without decreasing the detection limits of mass detection. Among the eight trace metals tested using this on-line system, the method detection limits for Cu, Zn, Mn, Co, Ni, and Pb reached subnanogram-per-milliliter levels; for electrolyte species such as Ca and Mg, the detection limits were in the range of 50-100 ng/mL. Analytical accuracy, expressed as spike recovery, was 100% +/- 15% for all of the elements tested. We demonstrate the applicability of the proposed system through the successful measurement of the basal values of Ca, Mg, Cu, Zn, and Mn in the ECF of a living rat brain and through in vivo monitoring of the concentration profiles of Mn and Pt in the ECF after the injection of drugs (MnCl2 and cisplatin) into the rats. This microdialysis system is the first to offer real-time, in vivo monitoring of trace elements such as Ca and Mg.     

Enhancement of the LC/MS analysis of fatty acids through derivatization and stable isotope coding

This paper focuses on the development of an enhanced LC/ESI-MS method for the identification and quantification of fatty acids through derivatization. Fatty acids were derivatized with 2-bromo-1-methylpyridinium iodide and 3-carbinol-1-methylpyridinium iodide, forming 3-acyloxymethyl-1-methylpyridinium iodide (AMMP). This process attaches a quaternary amine to analytes and enabled ESI-MS in the positive mode of ionization with common LC mobile phases. Moreover, detection sensitivity was generally 2500-fold higher than in the negative mode of ionization used with underivatized fatty acids. The limits of detection were roughly 1.0-4.0 nM (or 10 pg/injection) for standard fatty acids from C10 to C24 and spanned approximately 2 orders of magnitude in linearity. AMMP derivatives had unique tandem mass spectra characterized by common ions at m/z 107.0, 124.0, and 178.0. Individual fatty acids also had unique fingerprint regions that allowed identification of their carbon skeleton number, number of double bonds, and double bond position. The derivatization method also allowed coding of analytes as a means of recognizing derivatives and enhancing quantification. 2H-Coding was achieved through derivatization with deuterated 3-carbinol-1-methyl-d3-pyridinium iodide. The 2H-coded derivatization reagent, 3-acyloxymethyl-1-methyl-d3-pyridinium iodide, was used in two ways. One was to differentially label equal fractions of a sample such that after being recombined and analyzed by ESI-MS all fatty acids appeared as doublet clusters of ions separated by roughly 3 amu. This greatly facilitated identification of fatty acids in complex mixtures. Another use of stable isotope coding was in comparative quantification. Control and experimental samples were differentially labeled with nondeuterated and deuterated isotopomers of CPM, respectively. After mixing the two samples, they were analyzed by ESI-MS. The abundance of a fatty acid in an experimental sample relative to the control was established by the isotope ratio of the isotopomeric fatty acids. Absolute quantification was achieved by adding differentially labeled fatty acid standards to experimental samples containing unknown quantities of fatty acids. Utility of the method was examined in the analysis of human serum samples.     

Helical sorbent microtrap for continuous sampling by a membrane and trap interface for on-line gas chromatographic monitoring of volatile organic compounds

A helical sorbent microtrap consisting of a helical sorbent fixed inside a silicosteel capillary tube is presented. The main parameters that affect the safe sampling time of the helical sorbent microtrap in continuous sampling by a membrane and trap interface for on-line gas chromatographic monitoring of organic volatiles in gaseous samples are examined, taking into account the helical configuration of the sorbent, the presence of the membrane in system, and the properties of the analytes. Thermal desorption of analytes from the helical sorbent trap was also examined having regard to the influence of the turbulent flow generated by the helical sorbent in the heat transfer and the effect of thermal backward flow on the peak shape. The practical application of the helical sorbent microtrap in a membrane and trap interface was demonstrated by on-line gas chromatographic monitoring of four volatile organic compounds in the fume hood air and of volatile organic compounds from a diesel engine exhaust. The limit of detection was in the picogram per milliliter range, depending on the time of trapping and the parameters that affect the permeation through the membrane.