共查询到20条相似文献,搜索用时 860 毫秒
1.
2.
目的设计弹体毛坯热冲拔成形工艺方案。方法将冲子压入加热后的钢坯,使钢坯在压力作用下充满模腔,压成盂形,然后套在引伸冲子通过一串直径逐渐缩小的模圈,使弹体拉长、直径减小、壁厚减薄,获得合理的弹体毛坯尺寸,生产出合格毛坯。分析弹体毛坯冲拔成形原理、温度控制、工装设计及冲拔过程中的金属流动规律,根据体积不变原理,计算出冲拔毛坯尺寸。结果通过批量试制,根据冲拔过程中常见问题的控制措施,优化了冲拔工艺参数,实现了弹体毛坯热冲拔成形。结论通过冲拔原理分析、毛坯及工装设计,形成了热冲拔设计规范,该弹体毛坯热冲拔工艺可行。 相似文献
3.
目的设计弹体毛坯一次热收口成形工艺方案。方法将冲压成空心、变壁厚、桶状的毛坯,经过外皮粗车后进行收口变形,获得合理的弹体弧形部,生产出了合格毛坯。研究了弹体毛坯收口成形原理、温度控制、工装设计以及收口过程中的金属流动规律,根据体积不变原理,计算了收口前粗车毛坯尺寸。结果通过批量试制,根据收口过程中常见问题的控制措施,优化了收口工艺参数,实现了毛坯的一次热收口成形。结论通过收口原理分析、毛坯及工装设计,形成了毛坯一次收口设计规范,该弹体毛坯一次热收口工艺可行。 相似文献
4.
5.
6.
7.
8.
在分析了某汽车上带R24弧形槽成形件结构和工艺特点的基础上,利用Dynaform软件进行CAE模拟分析,确定了成形工艺。介绍了带R24弧形槽成形件冲压工艺方案的选择、排样设计和模具设计要点。 相似文献
9.
在“碳达峰、碳中和”背景下,我国氢能及燃料电池汽车产业发展迅速。作为典型的多层、薄壁杯类复杂件,涡旋盘是氢燃料电池系统用涡旋式氢循环泵的核心零件,其性能的优劣对氢燃料电池汽车的氢循系统性能有着极其重要的影响。主要综述了国内外涡旋盘的成形工艺,包括数控铣削、液态压铸、液态模锻、固态热锻、粉末冶金成形等,并分析探讨了不同成形工艺的优缺点;在此基础上,结合笔者的研究经历着重介绍了一种具有“高效短流程”特点的一模四件涡旋盘零件半固态多向挤压成形新工艺,设计了相应的成形模具,并详细介绍了适用于该工艺的模具浇道系统。 相似文献
10.
11.
A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling. 相似文献
12.
An approximate analytical expression is derived for the velocity of the front of the wave of change of boiling modes on a
rod and on a plate. The impact of the Thomson effect and of the heater orientation in the gravity field is included. Adequate
agreement is demonstrated between the derived relations and experimental data. 相似文献
13.
14.
15.
水三相点是开尔文热力学温度的唯一基准点,也是ITS-90国际温标重要的定义固定点。因此,水三相点不确定度分析对整个温标的建立、温度量值传递起着至关重要的作用。近3年来,中国计量科学研究院研制出一系列高质量的水三相点容器,加强了水三相点的研究,为不确定度的分析提供了更为可靠的实验依据。同时,不确定度的分析也是客观评价新研制容器性能的一个重要指标。因此,根据实验结果对新研制容器所复现的水三相点进行了不确定度评定。评定结果表明,其扩展不确定度为0.16mK(k=2.69,P=0.99)。 相似文献
16.
17.
18.
19.
Liebert A Wabnitz H Grosenick D Möller M Macdonald R Rinneberg H 《Applied optics》2003,42(28):5785-5792
A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue. 相似文献
20.
本文根据多年的实践检定经验 ,参照JJF1 0 59- 1 999《测量不确定度评定与表示》以及《测量不确定度表达 1 0讲》 ,对卧式金属罐容量的测量结果不确定度进行了评定。 相似文献